2003 Mercedes E320 Engine mount replacement! The best way!
I show how to replace the engine mount on w211 Mercedes with 3.2L engine. This is the most comfortable way to do it. It might look too much work to do but it took me roughly 2 hours to finish it on the lift. Only the thing I didn’t mention on the video is I have to remove the steering column from the rack which is Only one bolt 13mm.
Good luck and comment below if you have any questions. If your exhaust bolts are rusted keep some bolts and nuts handy just in case.!
Пікірлер: 25
All those below who say you don't have to remove the exhaust are talking rubbish. I have a 2003 E320 & it is impossible to get access to the top engine mount bolt because of the exhaust manifold. This is the best way to change engine mounts on a V6 engine & this guy is absolutely correct!!!!!
I had watched several videos on how to tackle this job with several videos suggesting different methods. I soaked the exhaust bolts in pb blaster the day before and decided to go with exhaust removal version. Everything went smooth, all exhuast bolts came out without issue. job took me 2.5 hours and im no mechanic. I could see exhaust bolts getting stuck being a real pain but if they come off with ease, id do it this way again.
Thank for the video bro. I had to show my boss this to prove to him that the exhaust has to come off to make my job easy!
@aslanmammadov2230
Жыл бұрын
I have more videos with 2 wd version if you want to watch
@myredute
Ай бұрын
Absolutely right!
Thanks
Do you really need to remove the exhaust pipe on the passenger side?
@aslanmammadov2230
3 жыл бұрын
Yes it is necessary.
👍🏼
Bu paduşkalar cırılır yoxsa yatır?
@aslanmammadov2230
3 жыл бұрын
Paduwqalar cirilada bilir yatada, catliyada.
U did too much extra work I work for Mercedes on the passenger side we remove the alternator on the driver side just disconnect the steering knuckle and jack the engine up. Most time u don't want to disturb the exhaust
@aslanmammadov2230
2 жыл бұрын
So what you are saying is it is possible to remove the both mounts from top ?
@paulmorrison4799
2 жыл бұрын
@@aslanmammadov2230 no.the driver side have to remove from below one u disconnect the steering knuckle and put to the side you have access to both bolts once you remove both bolts jack the engine up about an inch and you can slide the mount out next to the exhaust manifold
@paulmorrison4799
2 жыл бұрын
Entire job takes 2 hours
@aslanmammadov2230
2 жыл бұрын
@@paulmorrison4799 on 4 matic yes. But 2 wd version doesn’t have that room from what I remember. But next time I’ll double check
@paulmorrison4799
2 жыл бұрын
@@aslanmammadov2230 instructions is for rear wheel drive
This is not the 3.2l engine this is the 3.0 v6. the 3.2 is an inline 6 cylinder engine.
@aslanmammadov2230
Жыл бұрын
You are mistaking this for a diesel version. It is 2003 model E320 Gasoline Engine.
@myredute
Ай бұрын
Absolute rubbish. Understand your engines before you make a ridiculous post. This IS the 3.2 litre engine. I know ,because I have one!!!!!!!!!!
NO you DON'T have to remove the exhaust 😂 and the bottom bolt is 13mm broo 😂😂
@aslanmammadov2230
Ай бұрын
@kristiyan7707 why don’t you show us how it is done ?
@myredute
Ай бұрын
YES YOU DO when the engine is a 3.2 Litre. I know, because I have one!!!!!!!