I recently bought a new fan clutch, as the old one was 30 years old and the Ute was starting to over heat. I thought it deserved one after all that time. It seems to have done the trick, about $100 Aus. On e-Bay. Thanks for the vid.!
@house-ofhoon2 күн бұрын
That's great news it helped mate!
@mangomcpoo47510 күн бұрын
That code doesn't apply to bolt on 12h-t turbos from Mamba :/
@house-ofhoon10 күн бұрын
It does work mate. Type "HOHXMA" into the referral code, not the promo code 👍
@mangomcpoo47510 күн бұрын
@@house-ofhoon $80! cheers Man
@house-ofhoon10 күн бұрын
No dramas 😁
@jamiegreenwood799611 күн бұрын
hope the 1hz holds together after turbo install ...many have died after awhile ....I'm sticking with n/a 1hz in my 80
@house-ofhoon11 күн бұрын
It's usually a bad tune that kills them
@mangomcpoo47510 күн бұрын
@@house-ofhoon I can't believe you guys had the sump off for that drain and didn't replace the big end bearings (1HZ/1HD issue)
@house-ofhoon10 күн бұрын
That's because we replaced the big end bearings around 12 months earlier 👍
@jamiegreenwood79968 күн бұрын
@@house-ofhoon not necessary a bad tune these motors are just not designed for turbos full stop they don't have the proper pistons or connecting rods as i say lots and lots have shit them selfs
@JamesFunnell-rs1pb19 күн бұрын
Hi im in WA and would like you to 3D print something for my GU patrol,how do I contact you.
@reallyskeptical24 күн бұрын
Do you have video on how to adjust tighten wheel hub.
@house-ofhoon24 күн бұрын
Unfortunately, I don't mate
@reallyskeptical23 күн бұрын
@house-ofhoon thanks for replying tho appreciate it. Good content, mate
@house-ofhoon22 күн бұрын
Cheers mate 🤙
@troyphillips719Ай бұрын
Are the diy kits for sale yet?
@house-ofhoon29 күн бұрын
They sure are 👍 Sent me a PM on one of my socials 👍
@brockcolvin968Ай бұрын
Where did you get the T pieces from
@redhaze8080Ай бұрын
What is the crashing my Excel song?
@house-ofhoonАй бұрын
It's my own song mate 🙂
@IJ-E36Ай бұрын
LoL @ the Snack Net!
@house-ofhoonАй бұрын
The most important thing in the car!
@IJ-E36Ай бұрын
@@house-ofhoon and all this time I've used an Esky in the tow car!
@house-ofhoonАй бұрын
Gotta keep up with the times mate!
@IJ-E36Ай бұрын
@@house-ofhoon House of Hoon schools in session!
@mathewross3398Ай бұрын
also a flocked dash and steering boss extender ... nice car
@house-ofhoonАй бұрын
Gotta love a flocked dash 👌
@mathewross3398Ай бұрын
@@house-ofhoon my son is 16 and gets car parts for xmas etc this year was a flock kit in red ! bday was red and white paint to paint his pulsar rally car
@house-ofhoonАй бұрын
That's awesome mate!
@mathewross3398Ай бұрын
was that fuel tank leaking?
@house-ofhoonАй бұрын
Hayden washed the car prior to filming, so it was just water 👍
@jamesgill4035Ай бұрын
Thanks Bman. Loved the funnys at the end. 😂
@house-ofhoonАй бұрын
Glad to hear you enjoyed it 😊
@hdmotorsport6760Ай бұрын
Who's that handsome bearded fellow? I bet he's a great driver and never crashes...
@house-ofhoonАй бұрын
Never EVER crashes!
@MRMOPARMAN0426Ай бұрын
Juan
@house-ofhoonАй бұрын
👏👏👏
@thatsgangsta2450Ай бұрын
Either the drivers side hub is different with the clutch assembly snap ring or a previous owner installed it wrong because my was extremely difficult to get out
@house-ofhoonАй бұрын
Could even be manufacturing tolerances
@sethahul2593Ай бұрын
best tuner
@house-ofhoonАй бұрын
💯
@KonSkolarikis2 ай бұрын
Hi mate, how have you found using this turbo? Had any issues? Cheers
@HardstylePete2 ай бұрын
What metal did you use for this strut brace?
@house-ofhoon2 ай бұрын
I use Mild Steel for this one. I have made stainless steel strut braces for the S15 though
@IJ-E362 ай бұрын
Fair percentage increase there, has to be way better to drive now!
@house-ofhoon2 ай бұрын
Yea it's sooooo much better to drive now! Like a different vehicle!
@jpstrim2 ай бұрын
Great vid once again, excellent gains on the 80, sounded great the other day!
@house-ofhoon2 ай бұрын
Thanks mate! It's definitely made it much better to drive 😁
@VaughanMunro-js4nr2 ай бұрын
Another Great Video from the House of Hoon. Skilled Tuning on a Dyno makes a big difference. I would like to see the build-up of the Toyota 80 series. The conversion to a single cab, how the rear wall was done, and the Chassis modifications.
@house-ofhoon2 ай бұрын
Thanks mate! I may do a general walkthrough video of everything and then a more detailed video of just the chop and chassis extension 😊
@jamesgill40352 ай бұрын
Walk through would be great thanks. Must feel amazing to cruz in now.😎
@house-ofhoon2 ай бұрын
One walkthrough coming right up good sir! Yes, it's so much better to cruise in now! 😀
@andrewt39522 ай бұрын
Awesome love it when a vid drops from u mate. Any patrol content coming? 👍🎯🍻🇦🇺
@house-ofhoon2 ай бұрын
Thanks for sticking around mate! Appreciate it 😁 I've got some patrol videos in the pipeline. However, there will be a few videos of other things before the patrol
@josephmacey85122 ай бұрын
well done. I hope I see more from your channel , and would you be thinking about building an air box for a GU, with plans I would like to make one for mine.
@house-ofhoon2 ай бұрын
Cheers mate! Plenty more to come! I've already made an airbox for my patrol (not filmed unfortunately), so I probably won't be doing another one
@mJlReplicanT0012 ай бұрын
Goddam - Steady hand on the plasma 👌🏼
@house-ofhoon2 ай бұрын
Haha! Thanks mate!
@joel97932 ай бұрын
Are the cozza cv still holding up mate
@house-ofhoon2 ай бұрын
Yea they are. Have not had any issues with them since putting them in ☺️
@larryvenn24343 ай бұрын
I have crosscountry top mount , Will this modified manifold still fit ?
@house-ofhoon3 ай бұрын
I'm not sure to be honest because I don't have a cross country intercooler
@youngadventuresaustralia9523 ай бұрын
Where does the diesel heater inlet / exhaust run?
@house-ofhoon3 ай бұрын
The inlet is under the camper and the exhaust is out the side wall
@KP-ty9yl3 ай бұрын
I know exactly what this is; we call it "flowering." You need to support the outer edge of the blank with downward pressure or it will take the path of least resistance and begin to wrinkle. In extreme cases these wrinkles can cause blowouts. A more substantial lubricant will also help.
@house-ofhoon3 ай бұрын
Thanks for your help mate!
@TwoNuggs3 ай бұрын
Hey mate, I'm in Victoria too and need some assistance designing and fabricating a bull bar for my suv. It's going to be a unique build, won't see anything else like it and would love to get you on board with the journey!
@house-ofhoon3 ай бұрын
Hey mate. Sounds interesting! Send me an email or pm on insta or FB 👍
@TwoNuggs3 ай бұрын
@@house-ofhoon I sent a fb message on my partners fb as I don’t have it anymore haha
@shaun20493 ай бұрын
Thanks mate going to do mine
@house-ofhoon3 ай бұрын
Awesome mate! 😀
@chrisfisher39003 ай бұрын
Nice work
@house-ofhoon3 ай бұрын
Cheers Chris!
@garywinkworth33803 ай бұрын
great job mate. well done thanks for shareing
@house-ofhoon3 ай бұрын
Cheers mate! Thanks for watching 😁
@lukeirmer53163 ай бұрын
We have an older unit and it's a pile of crap. It can't duplicate bends and is extremely inconsistent. Its too bad because it could be a nice bender
@house-ofhoon3 ай бұрын
We've had inconsistent bending issues as well. It really is a shame. What model is your bender mate?
@lukeirmer53163 ай бұрын
@@house-ofhoon its the RDB250
@TheVirgilc3 ай бұрын
Hey mate! Where are you located in Victoria? We just pick up our tommy camper here in Ballarat, and heading back to south Autralia tomorrow, I'm just wondering if can purchase one of your Tommy Camper fly screen for S4-X model
@house-ofhoon3 ай бұрын
G'day. I've just replied to your email. Cheers 👍
@asicit67894 ай бұрын
Loose sloppy canvas by the looks of it. Disappointing as I was looking at these. Stitching also looks bloody average. Apart from that the platform as a whole is spot on!
@house-ofhoon3 ай бұрын
No issues experienced with the canvas so far ☺️
@davidnazario66464 ай бұрын
Nice 👍
@house-ofhoon4 ай бұрын
Thanks mate! 😁
@johnpulei79164 ай бұрын
Is there a build video
@house-ofhoon4 ай бұрын
Not of the cruiser build unfortunately. Just the turbo/intercooler
@br06sj084 ай бұрын
Interested to know whether this car was running hot, particularly towing?
@house-ofhoon4 ай бұрын
It only ran hot when the radiator was full of mud 🤣🤣🤣
@wittywitt15594 ай бұрын
This video really helps, because ive went and bought one for myself
@house-ofhoon4 ай бұрын
That's awesome mate! When did you buy it?
@wittywitt15594 ай бұрын
@@house-ofhoon like a week ago
@house-ofhoon4 ай бұрын
Sweet! Can I ask if you used my link/discount code?
@wittywitt15593 ай бұрын
@@house-ofhoonsorry I saw this video after I purchased
@house-ofhoon3 ай бұрын
No dramas mate 🤙
@pedowan824 ай бұрын
Nice work. I have a 16G waiting for me to install. Any idea what it’s done to your fuel economy? Stumbled onto this video randomly but KZread’s algorithm did good. I’m in Macedon Ranges.
@house-ofhoon4 ай бұрын
Cheers mate! Finally the KZread algorithm is working! Lol It's improved my economy. I use to get around 16-16.5L/100. I now get around 14-14.5L/100
@TheDbcdino4 ай бұрын
awesome video mate
@house-ofhoon4 ай бұрын
Cheers mate!
@andrewcheshire2444 ай бұрын
Nice work! ugh I'm dreaming of a sheet metal bender/press like that.
@house-ofhoon4 ай бұрын
Cheers mate! Definitely makes life a bit easier 😁
@dereksavage75694 ай бұрын
🙌 'promo sm'
@house-ofhoon4 ай бұрын
🙏
@jimhood12024 ай бұрын
Nice video thanks. I've never thought about the fan clutch before but after an expensive ac hose replacement the mechanic suggested the fan clutch as the probable cause of the burst hose. If only I'd seen your video sooner.
@house-ofhoon4 ай бұрын
Cheers mate. Sorry to hear about your AC hose replacement dilemma! Better late than never to learn though 🙂
@Bobbytoilet4 ай бұрын
Maybe you could use treadmill belt lubricant? that's 100 percent silicone oil.
@house-ofhoon4 ай бұрын
Interesting! 🤔
@mickeyblackice36945 ай бұрын
Nice job mate .always enjoy your work. Keep it rolling
@house-ofhoon5 ай бұрын
Greatly appreciated mate!! 😁
@mickeyblackice36945 ай бұрын
You welcome
@IJ-E365 ай бұрын
Vids are getting better and better, well done Guys!
@house-ofhoon5 ай бұрын
Thankyou mate!!! 😁
@VaughanMunro-js4nr5 ай бұрын
Great Video. The Fabrication is amazing as well as Mechanically fitting the Turbo. Love the Magic of clicking your fingers, and it's done.
@house-ofhoon5 ай бұрын
Cheers mate! I wish the same magic would happen in real life 😂
@andrewt39525 ай бұрын
Ur back! I missed ur last cuppla uploads. I missed ur content mate, have always enjoyed ur patrol mods👍🍻🎯🇦🇺
@andrewt39525 ай бұрын
Great fab work as usual mate
@house-ofhoon5 ай бұрын
Yea mate I'm back at it again lol. Much appreciated! Will hopefully have some more regular uploads coming this year
Пікірлер
I recently bought a new fan clutch, as the old one was 30 years old and the Ute was starting to over heat. I thought it deserved one after all that time. It seems to have done the trick, about $100 Aus. On e-Bay. Thanks for the vid.!
That's great news it helped mate!
That code doesn't apply to bolt on 12h-t turbos from Mamba :/
It does work mate. Type "HOHXMA" into the referral code, not the promo code 👍
@@house-ofhoon $80! cheers Man
No dramas 😁
hope the 1hz holds together after turbo install ...many have died after awhile ....I'm sticking with n/a 1hz in my 80
It's usually a bad tune that kills them
@@house-ofhoon I can't believe you guys had the sump off for that drain and didn't replace the big end bearings (1HZ/1HD issue)
That's because we replaced the big end bearings around 12 months earlier 👍
@@house-ofhoon not necessary a bad tune these motors are just not designed for turbos full stop they don't have the proper pistons or connecting rods as i say lots and lots have shit them selfs
Hi im in WA and would like you to 3D print something for my GU patrol,how do I contact you.
Do you have video on how to adjust tighten wheel hub.
Unfortunately, I don't mate
@house-ofhoon thanks for replying tho appreciate it. Good content, mate
Cheers mate 🤙
Are the diy kits for sale yet?
They sure are 👍 Sent me a PM on one of my socials 👍
Where did you get the T pieces from
What is the crashing my Excel song?
It's my own song mate 🙂
LoL @ the Snack Net!
The most important thing in the car!
@@house-ofhoon and all this time I've used an Esky in the tow car!
Gotta keep up with the times mate!
@@house-ofhoon House of Hoon schools in session!
also a flocked dash and steering boss extender ... nice car
Gotta love a flocked dash 👌
@@house-ofhoon my son is 16 and gets car parts for xmas etc this year was a flock kit in red ! bday was red and white paint to paint his pulsar rally car
That's awesome mate!
was that fuel tank leaking?
Hayden washed the car prior to filming, so it was just water 👍
Thanks Bman. Loved the funnys at the end. 😂
Glad to hear you enjoyed it 😊
Who's that handsome bearded fellow? I bet he's a great driver and never crashes...
Never EVER crashes!
Juan
👏👏👏
Either the drivers side hub is different with the clutch assembly snap ring or a previous owner installed it wrong because my was extremely difficult to get out
Could even be manufacturing tolerances
best tuner
💯
Hi mate, how have you found using this turbo? Had any issues? Cheers
What metal did you use for this strut brace?
I use Mild Steel for this one. I have made stainless steel strut braces for the S15 though
Fair percentage increase there, has to be way better to drive now!
Yea it's sooooo much better to drive now! Like a different vehicle!
Great vid once again, excellent gains on the 80, sounded great the other day!
Thanks mate! It's definitely made it much better to drive 😁
Another Great Video from the House of Hoon. Skilled Tuning on a Dyno makes a big difference. I would like to see the build-up of the Toyota 80 series. The conversion to a single cab, how the rear wall was done, and the Chassis modifications.
Thanks mate! I may do a general walkthrough video of everything and then a more detailed video of just the chop and chassis extension 😊
Walk through would be great thanks. Must feel amazing to cruz in now.😎
One walkthrough coming right up good sir! Yes, it's so much better to cruise in now! 😀
Awesome love it when a vid drops from u mate. Any patrol content coming? 👍🎯🍻🇦🇺
Thanks for sticking around mate! Appreciate it 😁 I've got some patrol videos in the pipeline. However, there will be a few videos of other things before the patrol
well done. I hope I see more from your channel , and would you be thinking about building an air box for a GU, with plans I would like to make one for mine.
Cheers mate! Plenty more to come! I've already made an airbox for my patrol (not filmed unfortunately), so I probably won't be doing another one
Goddam - Steady hand on the plasma 👌🏼
Haha! Thanks mate!
Are the cozza cv still holding up mate
Yea they are. Have not had any issues with them since putting them in ☺️
I have crosscountry top mount , Will this modified manifold still fit ?
I'm not sure to be honest because I don't have a cross country intercooler
Where does the diesel heater inlet / exhaust run?
The inlet is under the camper and the exhaust is out the side wall
I know exactly what this is; we call it "flowering." You need to support the outer edge of the blank with downward pressure or it will take the path of least resistance and begin to wrinkle. In extreme cases these wrinkles can cause blowouts. A more substantial lubricant will also help.
Thanks for your help mate!
Hey mate, I'm in Victoria too and need some assistance designing and fabricating a bull bar for my suv. It's going to be a unique build, won't see anything else like it and would love to get you on board with the journey!
Hey mate. Sounds interesting! Send me an email or pm on insta or FB 👍
@@house-ofhoon I sent a fb message on my partners fb as I don’t have it anymore haha
Thanks mate going to do mine
Awesome mate! 😀
Nice work
Cheers Chris!
great job mate. well done thanks for shareing
Cheers mate! Thanks for watching 😁
We have an older unit and it's a pile of crap. It can't duplicate bends and is extremely inconsistent. Its too bad because it could be a nice bender
We've had inconsistent bending issues as well. It really is a shame. What model is your bender mate?
@@house-ofhoon its the RDB250
Hey mate! Where are you located in Victoria? We just pick up our tommy camper here in Ballarat, and heading back to south Autralia tomorrow, I'm just wondering if can purchase one of your Tommy Camper fly screen for S4-X model
G'day. I've just replied to your email. Cheers 👍
Loose sloppy canvas by the looks of it. Disappointing as I was looking at these. Stitching also looks bloody average. Apart from that the platform as a whole is spot on!
No issues experienced with the canvas so far ☺️
Nice 👍
Thanks mate! 😁
Is there a build video
Not of the cruiser build unfortunately. Just the turbo/intercooler
Interested to know whether this car was running hot, particularly towing?
It only ran hot when the radiator was full of mud 🤣🤣🤣
This video really helps, because ive went and bought one for myself
That's awesome mate! When did you buy it?
@@house-ofhoon like a week ago
Sweet! Can I ask if you used my link/discount code?
@@house-ofhoonsorry I saw this video after I purchased
No dramas mate 🤙
Nice work. I have a 16G waiting for me to install. Any idea what it’s done to your fuel economy? Stumbled onto this video randomly but KZread’s algorithm did good. I’m in Macedon Ranges.
Cheers mate! Finally the KZread algorithm is working! Lol It's improved my economy. I use to get around 16-16.5L/100. I now get around 14-14.5L/100
awesome video mate
Cheers mate!
Nice work! ugh I'm dreaming of a sheet metal bender/press like that.
Cheers mate! Definitely makes life a bit easier 😁
🙌 'promo sm'
🙏
Nice video thanks. I've never thought about the fan clutch before but after an expensive ac hose replacement the mechanic suggested the fan clutch as the probable cause of the burst hose. If only I'd seen your video sooner.
Cheers mate. Sorry to hear about your AC hose replacement dilemma! Better late than never to learn though 🙂
Maybe you could use treadmill belt lubricant? that's 100 percent silicone oil.
Interesting! 🤔
Nice job mate .always enjoy your work. Keep it rolling
Greatly appreciated mate!! 😁
You welcome
Vids are getting better and better, well done Guys!
Thankyou mate!!! 😁
Great Video. The Fabrication is amazing as well as Mechanically fitting the Turbo. Love the Magic of clicking your fingers, and it's done.
Cheers mate! I wish the same magic would happen in real life 😂
Ur back! I missed ur last cuppla uploads. I missed ur content mate, have always enjoyed ur patrol mods👍🍻🎯🇦🇺
Great fab work as usual mate
Yea mate I'm back at it again lol. Much appreciated! Will hopefully have some more regular uploads coming this year