Hey mate just found your channel. Appreciate all the effort you go into showing all the steps! Top quality work! Keep it up

@house-ofhoon

Жыл бұрын

Much appreciated mate! I try to show as much detail as I can without it becoming too dragged out and boring.

Far out man you made that look easy! I wish I had the experience you’ve got in sheet metal! You’re very good at it!

@house-ofhoon

Жыл бұрын

Cheers mate! The magic of editing 😂 It's all just practise mate 👍

Love the whole build mate, nice fab skills.

@house-ofhoon

2 жыл бұрын

Much appreciated mate!! Glad to hear your liking it 😁

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

Great setup. So many good ideas in this build. Thanks for sharing.

@house-ofhoon

Жыл бұрын

Cheers mate. Thanks for watching!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

@matthalpin1981

Жыл бұрын

@@ottouring Subscribed now! :-)

@ottouring

Жыл бұрын

Hi Matt, Thanks for subscribing. I really appreciate it. Hopefully you get some ideas or discover some great locations Cheers Craig Out There Touring

@house-ofhoon

Жыл бұрын

Hi Craig. Please don't go and advertise your channel on my videos without even contacting me about it

Fantastic job!

@house-ofhoon

2 жыл бұрын

Cheers Peter!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

Nice work! ugh I'm dreaming of a sheet metal bender/press like that.

@house-ofhoon

4 ай бұрын

Cheers mate! Definitely makes life a bit easier 😁

Would love to have a workshop like that

@house-ofhoon

2 жыл бұрын

It certainly makes fabricating things easier 😁

Great work!

@house-ofhoon

2 жыл бұрын

Thanks Elizabeth!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

Nice work

@house-ofhoon

4 ай бұрын

Cheers Chris!

Looks great. Absolute duck,s guts.😂

@house-ofhoon

Жыл бұрын

Haha cheers mate! 😁

Nicely done 👍🏾

@house-ofhoon

2 жыл бұрын

Cheers mate!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

Very cool!

@house-ofhoon

2 жыл бұрын

Cheers bro!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

great job mate

@house-ofhoon

2 жыл бұрын

Much appreciated Steve!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sub Cheers Out There Touring

Awesome I like that

@house-ofhoon

2 жыл бұрын

Cheers mate!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sub Cheers Out There Touring

Kickass! 💯

@house-ofhoon

2 жыл бұрын

Cheers bro!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sub Cheers Out There Touring

Nice work mate Looks like you have access to a workshop with some good gear and skills and ideas Regards another fabricator who loves doing the same 👍

@house-ofhoon

Жыл бұрын

Cheers mate 🤙 Gotta love creating something from nothing 😁

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

My good... now that's a man cave with some toys!!!💰

@house-ofhoon

2 жыл бұрын

Haha cheers mate

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

Nice work, subbed.

@house-ofhoon

2 жыл бұрын

Thanks mate! Appreciate it!

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

G'day, awesome build. Have subscribed! What screws do you use to mount the pantry to the aluminum canopy floor? Are they self tappers?

@house-ofhoon

6 ай бұрын

Thanks for subscribing mate! I used stainless dome head bolts and put 50x50x3 aluminium square plates on the underside of the floor with a washer and nyloc nut 👍

Yeah good job mate, I like it & ur new HOH badge. Have u had any issues with the paper towel unrolling as u travel from vibrations etc? If it was unrolling at all I was thinking maybe u could add a little bit of thin-ish spring steel to apply a bit more down pressure from above or behind in centre of roll. Nice setup. Cheers

@house-ofhoon

8 ай бұрын

Cheers mate. Yes, my paper towel unrolls unfortunately. I'm sure if I make it a tighter fit into the towel roll it'll be much better. That's a great idea though! Thanks 🤙

So easy to do when you have all the tools. ……………………………..the skills also help a lot

@house-ofhoon

Жыл бұрын

More can be created with more skills and less tools than more tools and less skills. It's all about the operator 👍

Hey mate awesome video, good tip is to just use 25x25 angle for your locking lever bars, fair bit cheaper if you make a few and easy as

@house-ofhoon

2 жыл бұрын

Cheers mate! Always more ways than one to skin a cat 🙂

@MRMOPARMAN0426

2 жыл бұрын

Problem with 25x25 is you have to order and stock more material, and you only have 22ish mm to drill and bolt, which can be a dog to drill in tight spots. By using sheet, you can fold it different ways to add more strength (ie S or C channel), you can make the bolted section as wide as you need, the material is already in stock and you can usually make it from scrap you would normally throw out.

@Bns790

2 жыл бұрын

@@MRMOPARMAN0426 I just use the angle because I make heaps of them so I have plenty in stock, then I just rivet them, but sheet is also a good way

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

If only i could TIG weld. Cheers

@house-ofhoon

9 ай бұрын

Anyone can TIG weld. Its just practise 😊

Thats wicked mate, you make em for other people or just your own ?

@house-ofhoon

2 жыл бұрын

Cheers mate! Just make things like this for myself 🙂

Awesome work and build. Did you make the canopy as well?

@house-ofhoon

Жыл бұрын

Cheers mate! Yes, I sure did 🤙

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

Where did you source the netting. Awesome work!

@house-ofhoon

2 жыл бұрын

Cheers mate! I got it from spotlight

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

Needs Coco Pops!

@house-ofhoon

2 жыл бұрын

I have room for ALL the Coco pops!

Great video mate. If you were just starting out and didn’t have a folding machine like that why could you use instead?

@house-ofhoon

Жыл бұрын

Cheers mate. You can actually DIY a folder out of some basic materials such as angle iron and some pipes. There are a few videos on KZread of how to make them 👍

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

How has the mesh netting held up over the past few months?

@house-ofhoon

Жыл бұрын

It's held up well! Would be nice if the mesh was a little bit stiffer, however I really can't complain

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

hey mate where did you get that handle on the slides?

@house-ofhoon

2 жыл бұрын

Hey mate. I got it from Dunn and Watson 👍

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sun Cheers Out There Touring

Would you make and sell the paper towel holders ? Keen to buy

@house-ofhoon

2 жыл бұрын

Yea mate. Send me a message on my insta to discuss further 🙂 instagram.com/invites/contact/?i=1ab1wuhuaz25&

@ottouring

Жыл бұрын

Hi, Just read yr comment and thought you might get some ideas from my channel Like, share and sub Cheers Out There Touring

You put your logo on upside down ;)

@house-ofhoon

Жыл бұрын

DOH!!! 😂

How much for a custom pantry? Start a small business. All other pantry’s come standard dimensions.