Пікірлер

• 
  @jochenmuller6023Күн бұрын

  Senkio vor this Video verry help lg😂

• 
  @gerardjanson565517 күн бұрын

  What’s a catch can?

• 
  @gerardjanson565517 күн бұрын

  Looks great! I was thinking of putting the metal on the front like you but was going to cut the cover to do it. Your way is easier!! Where did you get the metal from?

• 
  @sifulowangАй бұрын

  94 XJ pump is angled for easy removal - maybe ..

• 
  @carsonpacheco222Ай бұрын

  Thank you. Have you ever seen an 11mm deep socket?

• 
  @davidcoolbaugh9976Ай бұрын

  Show me show me where the screws are to take it apart so I can clean it

• 
  @gentryneal273 ай бұрын

  Thanks awesome job my 1998 Jeep have the same problem. Now I know what to do.

• 
  @platinumuschannel3 ай бұрын

  This is a surprisingly good walk through on the steps to change a cater wooler. Sometimes it borderlines on an ASMR video, but that's just me lol. IMPORTANT TIP: Some water pumps are pipe threaded, meaning, the inlet tube may not thread on quite all the way! it's fine, just be sure to use teflon!

• 
  @jacobguthrie69733 ай бұрын

  What rear end did you use and how did you mount it to the chassis

• 
  @slobodankasloba14594 ай бұрын

  Postovanje da lis te popravljali 4

• 
  @MarioCedilloSuiza5 ай бұрын

  Thank you mate! now mine ist like new

• 
  @benjaminsmith14295 ай бұрын

  Excellent video, I’m about to tackle this👌🏻

• 
  @Hairball7866 ай бұрын

  Great vids, Man. Got mine done. Little tip for not losing screws... I cut the flap off of a cardboard box and draw a diagram of whatever I'm working on. Stab the screws into the cardboard, in the location of the diagram where they came from. Easy to get the same screws put back where they came from. 👍 Thanks for posting, Sir. Very helpful! EDIT: Another little tip... If you don't have a compressor or canned air, an old, clean paint brush is decent for brushing away the dust.

• 
  @israelbrown76227 ай бұрын

  That is CRAZY! it's fairly easy to change fuel pumps in these vehicles. Remember "BOOM AND YOUR DEAD!" just wait until your almost out of gas and change it out the right way. No need to play with your life like this!

• 
  @mugivermusclemachines57446 ай бұрын

  Allot of measuring was done for accuracy as to not puncture the tank. But yes, one must be willing and careful ! I can now change the fuel pump in 20 minutes, allot easier than dropping the tank out on the trail or wherever as i keep a new spare pump under the back seat!

• 
  @larrycurtis8407 ай бұрын

  Buying a new one...

• 
  @bartex20087 ай бұрын

  Mine blowed yesterday because i didnt the maintain somebady know where i can buy the full motherboard?

• 
  @bluesriot28 ай бұрын

  the how the why and the wrench sizes , with great camera angle and resolution , 5 stars dude !!!!! thanks , def a pos pump but the rest of that straight six is pretty solid

• 
  @albertstwrt8 ай бұрын

  how do I get one of these Chassis

• 
  @mugivermusclemachines57446 ай бұрын

  Thats what i said..lol, this is why i built my own. Thanks for watching and commenting !

• 
  @wonkydonkey78998 ай бұрын

  Can you make a video on how to remove the engine cover?

• 
  @americathebeautiful38838 ай бұрын

  Awesome video man. I’m having this issue on my 96. Going to check the ground wires now. Alternators good Batteries good Checked all my fuses/circuit breakers/relays If it’s not the ground wire then I think all that’s left is the voltage regulator but now I can narrow it down. Thanks man

• 
  @mugivermusclemachines57446 ай бұрын

  Good luck ! Thanks for watching and commenting !

• 
  @matthewsheppard9 ай бұрын

  thats not the carging port

• 
  @BarneyG35010 ай бұрын

  I just the corn in the husk on the grill, 15 minutes later I take it off the grill and husk it right away. 99% of the silk comes off with the husk.

• 
  @mugivermusclemachines57446 ай бұрын

  Yes, works both way's but tin foil helps keep some moisture in for a more tender cob..lol Thanks for watching and commenting !

• 
  @SmackingTuna10 ай бұрын

  I just bought a fuel pump today for my 97 Jeep Grand Cherokee Laredo 4x4 it has 6L engine. I couldn’t find the fuel filter so it turns out it’s on the actual fuel pump with the pressure regulator. But I noticed it would never start on the first crank and always on the second crank. Then say I’m going 65 and accelerate to pass someone at 70 it stutters a hit until I press the pedal easier. I’m thinking fuel filter or pump so I bought the whole set at Autozone. I’m going to try to make it to work one more day then replace it Friday after work. Hopefully this resolves my problem. My check engine like came on twice but I had no way to check with the tester and I did a reset with battery which I shouldn’t had done. Now it’s a guess and hope it’s the fuel pump. I replaced the fuel injectors. I haven’t replaced the spark plugs I bought the Jeep about 2 months ago and fixed a lot on it. A few weeks ago the oil pressure kept dropping at idle so I got an oil change from a shop and still did the same thing afterwards. So i bought a oil pressure switch and now I haven’t had the issue since. I believe the other one was replaced recently but you could see alot of threads like they didn’t have it tightened all the way. Well thank for the video I’m going to attempt this repair tomorrow.

• 
  @mugivermusclemachines57446 ай бұрын

  Hope you solved your issues, if not i would suggest new spark plug wires with the spark plug change.. GL, Thanks for watching and commenting !

• 
  @SmackingTuna10 ай бұрын

  I just bought a fuel pump today for my 97 Jeep Grand Cherokee Laredo 4x4 it has 6L engine. I couldn’t find the fuel filter so it turns out it’s on the actual fuel pump with the pressure regulator. But I noticed it would never start on the first crank and always on the second crank. Then say I’m going 65 and accelerate to pass someone at 70 it stutters a hit until I press the pedal easier. I’m thinking fuel filter or pump so I bought the whole set at Autozone. I’m going to try to make it to work one more day then replace it Friday after work. Hopefully this resolves my problem. My check engine like came on twice but I had no way to check with the tester and I did a reset with battery which I shouldn’t had done. Now it’s a guess and hope it’s the fuel pump. I replaced the fuel injectors. I haven’t replaced the spark plugs I bought the Jeep about 2 months ago and fixed a lot on it. A few weeks ago the oil pressure kept dropping at idle so I got an oil change from a shop and still did the same thing afterwards. So i bought a oil pressure switch and now I haven’t had the issue since. I believe the other one was replaced recently but you could see alot of threads like they didn’t have it tightened all the way. Well thank for the video I’m going to attempt this repair tomorrow.

• 
  @florianjanen989510 ай бұрын

  Bla bla bla bla bla

• 
  @timvest814111 ай бұрын

  People don't bubba up your Jeep or any other vehicle this way. All the time you wasted on this you could have fixed it right by dropping the tank. What a disservice to Jeeps everywhere.

• 
  @mugivermusclemachines57446 ай бұрын

  Yes sir, that sounds fun to me, out on a muddy off road trail, up to the axles in mud with my buddies behind me..I'll just drop the tank and fix er real quick..NOT.. More Lilley have someone winch my junk off the trail so others can pass...at least it will make memories that will last !

• 
  @timvest81416 ай бұрын

  @@mugivermusclemachines5744 that's what you do when it's broke down is get it off the trail so others can pass. You certainly don't try to put in a new fuel pump in the tank so why not do it the right way?

• 
  @caps4283 ай бұрын

  ​@timvest8141 If you put in the effort to make a access door, your fuel pump will never go out again that's just how it works.

• 
  @timvest81413 ай бұрын

  @@caps428 mine was put in by dropping the tank in less time than it took to bubba up the one in the video.

• 
  @johnkoury111611 ай бұрын

  Another awesome video!!

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !

• 
  @johnkoury111611 ай бұрын

  I know this was 5 years ago but holy crap this sis so cool. Thank you for sharing this!!!

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !

• 
  @johnkoury11166 ай бұрын

  @@mugivermusclemachines5744 sure thing my friend.

• 
  @jat-justamaturetech-philpj828511 ай бұрын

  Can the TPS give rich codes like po172 and po175 oxygen sensors, if not working correctly??

• 
  @mugivermusclemachines57446 ай бұрын

  I am not sure, but i don't think it does. Thanks for watching and commenting !

• 
  @russhatcher440211 ай бұрын

  Thanks man.This worked

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !

• 
  @dmansf49ers7111 ай бұрын

  I just dumped my tubes in a big bowl nice idea though 👍😅

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !

• 
  @jamesnelson5300 Жыл бұрын

  ALWAYS REMOVE THE BATTERY FIRST before taking apart an electronic device to prevent short circuiting the battery which may cause a fire or explosion.

• 
  @Eyeseeall472 Жыл бұрын

  I was in the parking lot getting out of work fed up with my 1993 grand Cherokee and how poorly it idled I did this trick and it works now I’m super happy 😂

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !

• 
  @protubeUyou Жыл бұрын

  Video quality for 2023 is pretty bad bro.

• 
  @mugivermusclemachines57446 ай бұрын

  Maybe, it was filmed in 2017 if that helps.

• 
  @bigpoppa7297 Жыл бұрын

  Worked on 2017 jeep grand cherokee

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !

• 
  @maryfail2393 Жыл бұрын

  Taking case off is it Phillips or flat screwdriver?

• 
  @seandonahue87 Жыл бұрын

  Phillips

• 
  @Lisa3066 Жыл бұрын

  I find that it’s tobacco dusts that binds up the machine. We just take the bottom off and clean all the dust out. It works great after doing that.

• 
  @curtismoff Жыл бұрын

  mine has counter bought used for 40 and ive rolled 2000 cigs on it without doin anything to it. Use the right cut tobacco pick out the stems and throw the damn dust away

• 
  @robertquilimaco1159 Жыл бұрын

  Thanks so much helped me a great deal

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !

• 
  @naanaa1111 Жыл бұрын

  Doesnt make sense.

• 
  @naanaa1111 Жыл бұрын

  Audio is too low. You sound like you are mumbiling

• 
  @poppaluv Жыл бұрын

  mine just makes a light 'Click" the when lever is down. I rolled 10, went to roll more a few hours later and...click. Also, where is the optical sensor?

• 
  @poppaluv Жыл бұрын

  I am on my second one in a few months. My issue is it worked fine I tried to roll today and i get a slight "click" and the red light.

• 
  @dawnpariseau45598 ай бұрын

  That is exactly what my four month old machine is doing

• 
  @jimmoravec1326 Жыл бұрын

  It’s never the relay 😂 that’s too easy. I’m doing a 96 Jeep right now and that’s what I always do with my own vehicles is cut a little access door. Had a bad brand new fuel pump that was a defect in a customer’s vehicle. I had to drop the tank again and put another new one in. I couldn’t charge the customer twice wasn’t their fault but after that I cut an access panel

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !

• 
  @PeakyBlinder Жыл бұрын

  Why no oil, that will friction weld

• 
  @marckemp9955 Жыл бұрын

  I know this is probably not going to sail in some mind's but there's actually restaurants using waste oil systems for their used fryer oil. Let me rephrase that. They use a cheaper setup for filtering their used fryer oil. And they just use like a Fram or other brand spin on oil filter. So instead of manually pouring hot or warmed fryer oil onto a filter paper or instead of buying a restaurant pumping system ($$$$$) they pump and filter at the same time and the oil could even be cold so the employee risk is practically nill. Restaurant owners know cold oil won't filter very fast at all but if it was electrically pumped it would. And then those expensive filter cones and flats are behind you. Just a thought.

• 
  @pl747 Жыл бұрын

  About how long will that fan run on just the battery? I am wondering about a prolonged ice storm.

• 
  @rendiix4269 Жыл бұрын

  When i try this on my 95 cherokee laredo 4.0 it doesnt want to start now lol

• 
  @jonathanespinosa6047 Жыл бұрын

  Why do you have the crankcase vent on the intake manifold capped? Should I do it for mine? I got a Evap problem and I capped it and runs smoother but what’s the reason?

• 
  @islandjason Жыл бұрын

  Thanks man, just used your measurements and it worked perfectly. Fuel pump swapped in 20 minutes with out having to drain 65Liters of gas.

• 
  @mugivermusclemachines57446 ай бұрын

  Thanks for watching and commenting !