I know this is probably not going to sail in some mind's but there's actually restaurants using waste oil systems for their used fryer oil. Let me rephrase that. They use a cheaper setup for filtering their used fryer oil. And they just use like a Fram or other brand spin on oil filter. So instead of manually pouring hot or warmed fryer oil onto a filter paper or instead of buying a restaurant pumping system ($$$$$) they pump and filter at the same time and the oil could even be cold so the employee risk is practically nill. Restaurant owners know cold oil won't filter very fast at all but if it was electrically pumped it would. And then those expensive filter cones and flats are behind you. Just a thought.

Another awesome video!!

@mugivermusclemachines5744

7 ай бұрын

Thanks for watching and commenting !

I think I would go one step further and put a small motor on that. But it looks like it works well.

Cool idea. I wonder how long the pump would last pumping diesel fuel. Not not lubricant in diesel anymore. Thanks for the video

Pretty cool, I would probably not use an impact gun although

This was helpful. I'm heating my shop with waste oil too. So far I've been collecting oil using a hand crank barrel pump, but it takes about an hour to collect 55 gals of oil, not to mention the arm power required to crank that thing. I think you'd probably be better off using an actual drill rather than an impact gun to spin the SBC pump, but I'm just speculating because I havent built one yet. My big question is how many gallons can you pump on one battery charge for the drill? The other concern is that I usually have to pump up about 6ft of head to get from the garages oil tank up to my 55 gallon barrel in my pickup bed. Will this do iy and how long will it take and how many batteries?

@mugivermusclemachines5744

4 жыл бұрын

Haven't tried a full run with the battery power grill, planning on using electric drill when I do that..

@marcellemay7721

4 жыл бұрын

@@mugivermusclemachines5744 Thanks for your reply. After writing the comment,I got to thinking about running the hand crank pump with an electric drill. I removed the hand crank and whipped up an adapter on the lathe to turn it with the electric drill. It works great. I pumped 5 gals in about 30 seconds, in low gear... Could probably go faster but didn't want to splash oil all over the place.😊

@mugivermusclemachines5744

4 жыл бұрын

Sweet, ther you go!! I like it!! Sounds like that is way easier to make than a chev oil pump like mine ..lol

Hi could you please do a updated vidio of your oil storage set up as last seen it there was only one barrel now looks like there are several

@mugivermusclemachines5744

3 жыл бұрын

I've been thinking of doing an updated video, i am up to 10 barrels 55gal Each lol..

@mugivermusclemachines5744

3 жыл бұрын

kzread.info/dash/bejne/gX-ZzbuGdqTKhMo.html

@mugivermusclemachines5744

3 жыл бұрын

Here ya go, haha!!