freaking hilarious install... i may do this to my laundry room 🤣i dispise the window in that door the heat coming from that window is nuts
@umurselek33106 күн бұрын
If anyone sees this, Don't mount the nozzles with a plastic zip tie, which will melt and move instantly...if you must use zipties, use metal ones. I've witnessed fires that melt the pull cable, disabling the whole system
@Dan-nl2ug12 күн бұрын
You are one talented young man
@EternalHao17 күн бұрын
Anybody watching this, just use a 3/8 extention with a hammer! & order a new roll pin prior to swap!!!!
@JustCreateYou3 күн бұрын
Wahhhh why lol
@brucemalm142018 күн бұрын
Great video. Would also like to know what hoist weight rating you used
@GtvCsatorna21 күн бұрын
The amount of skill, and knowledge you have is absolutely, mind-blowingly insane! If there's any chance you'd teach an 18 year old, since I'd love to get into rally and also fixing, racing, rallying, I'd love to book private lessons!!
@napalmloveskids22 күн бұрын
OMG I can't imagine the adrenaline rush! I grew up doing this on the old haul roads of Eastern Ohio, in my ford ranger, just dreaming of being a pro racer one day. Never wrecked but had some close calls, was able to recover.
@jimmycorreal769322 күн бұрын
Just a suggestion from a collision expert. You should always use weld through primer on all welds in automotive applications. Also the tube should be coated before installation or you will have rust issues
@chuymadrid170922 күн бұрын
This is amazing.
@williamhall2386Ай бұрын
I did this mod and it came out soo badly... :( I did so much prep work and research and even still...
@you2ubesucksbeyondАй бұрын
Such a clean fit super nice work
@5440bubbАй бұрын
wasted vid -----you didn't demonstrate the quickness by turning 90 degrees
@bergenrallyteam3648Ай бұрын
Bummer about the windscreen! What 3d scanner did you use? Thanks Kris keep up the great work!
@briansoteros2987Ай бұрын
What angle did you use for stair treads and how did you calculate it?
@NotSean269Ай бұрын
Looking forward to the next one
@g4engineering173Ай бұрын
The 3D scan of the interior of your car is an awesome tool and it will allow you to do a great main hoop and forward laterals. I was hoping to learn how to do forward laterals without the laser scan from your video
@HesAtItAgainАй бұрын
Good job dude
@noahbenns7518Ай бұрын
Can’t wait to see it complete.
@patrick87100Ай бұрын
Super happy for the update. Keep at it!
@johnjohnjohnjohn921Ай бұрын
Super cool vid. Love seeing your lady help you out too 💪🏻
@brandonkisor3375Ай бұрын
good stuff I think the cable connected only on one side is wobbly without any additional cross angle bracing but if you’ll twist the drill clutch tight around your bit then one click back it locks in place I think you tightened it a few times on the second mounting but could be wrong thanks for a cool video
@johnyoung3561Ай бұрын
Which hoist did you buy from harbor freight?
@irisbaez1972Ай бұрын
WHERE IS THE A/C UNIT? WHAT THE HELL!
@maxasaurus3008Ай бұрын
I was impressed it was the same girl the whole time and she even helped!
@ItsDaveR172 ай бұрын
Currently trying to relocate some seat mounts in an old Honda. Every time I try to mig weld I keep blowing through the metal. What settings did you use when you welded this?
@johnelway48262 ай бұрын
Building the cage yourself is crazy unless you are already into welding. All the rally guys will tell you to buy a car with a cage and logbook or you'll quickly put 40k into a 4k car. Amazing work though man living the dream while I rallycross a Corolla lol.
@LightC53 ай бұрын
Cool song choices 😊
@LightC53 ай бұрын
No mask 😂
@davorhamzic52233 ай бұрын
cant wait to see this build
@davorhamzic52233 ай бұрын
yall are real cool good work.
@patrick871003 ай бұрын
So nice to have a new build. I totally subscribed back
@bradleycole26553 ай бұрын
Wait a minute is this Missouri?
@iconicstance29943 ай бұрын
Hey what was that thing you used to remove the sound deadening? Just wondering if there's a none air tool for it, for us folks at home.
@DirtyGarage3 ай бұрын
It’s called a needle scaler. I’m not sure if there’s an electric version of it though.
@elevatorguy1113 ай бұрын
Great job! I was thinking I would be able to follow till you walked over to your cnc plasma cutter and metal brake. LOL Your tools are a level above what I have to work with. :)
@lavachemist3 ай бұрын
Cool video. I'm excited to build my own cage. 1/2 of a 4x4 sheet would be 2x4 not 2x2, btw.
@lotuselansteve4 ай бұрын
Why not simply hire a set of corner weight scales? In the UK this costs around £40/day.
@kalebkerstetter87524 ай бұрын
I remember watching this basically when it got uploaded when it was getting built and i lost this channel idk how but just recently refound it now picking back up where i was
@crobertsson70304 ай бұрын
semper fi!
@crobertsson70304 ай бұрын
That car is so effing cool. Great work!
@iliapopovich4 ай бұрын
Thanks, very good information. I have to do a similar thing, but never done it before.
@osgargorally69474 ай бұрын
This is exactly what I been looking for you would happen to have blueprints 😂 please thanks for the video it’s so interesting
@charliejohnson64164 ай бұрын
Alternate title: welder shows welding skills
@ibrahimzeifri1424 ай бұрын
I also have a 350z and I want to modify it to make it a rally car and I need to decide which coilovers I should use, which one do you recommend? (I don't have a very high budget) I want to drive it on dirt and gravel, nothing special
@bergenrallyteam36484 ай бұрын
great to see you back and getting after it. Look forward to seeing you back in the woods. Did you go to sno drift for #199?
@user-ii4fs7du9p4 ай бұрын
Bro, you really have my three dream cars. 240 street daily, 07wrx built weekend driver, and gc8 rally. Exactly what I’ve been longing for 😅
@mrbetabombs20174 ай бұрын
The way your co driver looked at the trees when you lost it is kinda scary, I've never been in a rally car (I'd love to lol) but I'm guessing it must be really scary realizing that you lost control and seeing a tree approaching at 90mph, I'm glad you guys are safe!
@mrbetabombs20174 ай бұрын
12:24 lmao I was thinking the same, I've never seen 900 being called out
Пікірлер
Curious why you put the treads so far apart?
freaking hilarious install... i may do this to my laundry room 🤣i dispise the window in that door the heat coming from that window is nuts
If anyone sees this, Don't mount the nozzles with a plastic zip tie, which will melt and move instantly...if you must use zipties, use metal ones. I've witnessed fires that melt the pull cable, disabling the whole system
You are one talented young man
Anybody watching this, just use a 3/8 extention with a hammer! & order a new roll pin prior to swap!!!!
Wahhhh why lol
Great video. Would also like to know what hoist weight rating you used
The amount of skill, and knowledge you have is absolutely, mind-blowingly insane! If there's any chance you'd teach an 18 year old, since I'd love to get into rally and also fixing, racing, rallying, I'd love to book private lessons!!
OMG I can't imagine the adrenaline rush! I grew up doing this on the old haul roads of Eastern Ohio, in my ford ranger, just dreaming of being a pro racer one day. Never wrecked but had some close calls, was able to recover.
Just a suggestion from a collision expert. You should always use weld through primer on all welds in automotive applications. Also the tube should be coated before installation or you will have rust issues
This is amazing.
I did this mod and it came out soo badly... :( I did so much prep work and research and even still...
Such a clean fit super nice work
wasted vid -----you didn't demonstrate the quickness by turning 90 degrees
Bummer about the windscreen! What 3d scanner did you use? Thanks Kris keep up the great work!
What angle did you use for stair treads and how did you calculate it?
Looking forward to the next one
The 3D scan of the interior of your car is an awesome tool and it will allow you to do a great main hoop and forward laterals. I was hoping to learn how to do forward laterals without the laser scan from your video
Good job dude
Can’t wait to see it complete.
Super happy for the update. Keep at it!
Super cool vid. Love seeing your lady help you out too 💪🏻
good stuff I think the cable connected only on one side is wobbly without any additional cross angle bracing but if you’ll twist the drill clutch tight around your bit then one click back it locks in place I think you tightened it a few times on the second mounting but could be wrong thanks for a cool video
Which hoist did you buy from harbor freight?
WHERE IS THE A/C UNIT? WHAT THE HELL!
I was impressed it was the same girl the whole time and she even helped!
Currently trying to relocate some seat mounts in an old Honda. Every time I try to mig weld I keep blowing through the metal. What settings did you use when you welded this?
Building the cage yourself is crazy unless you are already into welding. All the rally guys will tell you to buy a car with a cage and logbook or you'll quickly put 40k into a 4k car. Amazing work though man living the dream while I rallycross a Corolla lol.
Cool song choices 😊
No mask 😂
cant wait to see this build
yall are real cool good work.
So nice to have a new build. I totally subscribed back
Wait a minute is this Missouri?
Hey what was that thing you used to remove the sound deadening? Just wondering if there's a none air tool for it, for us folks at home.
It’s called a needle scaler. I’m not sure if there’s an electric version of it though.
Great job! I was thinking I would be able to follow till you walked over to your cnc plasma cutter and metal brake. LOL Your tools are a level above what I have to work with. :)
Cool video. I'm excited to build my own cage. 1/2 of a 4x4 sheet would be 2x4 not 2x2, btw.
Why not simply hire a set of corner weight scales? In the UK this costs around £40/day.
I remember watching this basically when it got uploaded when it was getting built and i lost this channel idk how but just recently refound it now picking back up where i was
semper fi!
That car is so effing cool. Great work!
Thanks, very good information. I have to do a similar thing, but never done it before.
This is exactly what I been looking for you would happen to have blueprints 😂 please thanks for the video it’s so interesting
Alternate title: welder shows welding skills
I also have a 350z and I want to modify it to make it a rally car and I need to decide which coilovers I should use, which one do you recommend? (I don't have a very high budget) I want to drive it on dirt and gravel, nothing special
great to see you back and getting after it. Look forward to seeing you back in the woods. Did you go to sno drift for #199?
Bro, you really have my three dream cars. 240 street daily, 07wrx built weekend driver, and gc8 rally. Exactly what I’ve been longing for 😅
The way your co driver looked at the trees when you lost it is kinda scary, I've never been in a rally car (I'd love to lol) but I'm guessing it must be really scary realizing that you lost control and seeing a tree approaching at 90mph, I'm glad you guys are safe!
12:24 lmao I was thinking the same, I've never seen 900 being called out
Cut the chasis ? Wow
Bro casually flexed his z