Best Challenger videos on KZread! Clean and to the point. Keep them coming! Happy to hear that this doesn't void the warranty. There's always something......

Seems like you would have way more subs. You always post excellent detailed videos. And I'm never confused about what the video is going to be about. Keep up the great work bc it is seriously appreciated.

@WorkPlayDrive

6 жыл бұрын

Thank you, I try my best man :)

Man they're finding ways to make modding our cars a little harder & harder every year. Seems like a simple enough procedure though. I have the worst "install" type videos online haaha - Nicely done.

@WorkPlayDrive

6 жыл бұрын

Thanks man, I just started watching your channel recently thanks to Growls Garage I haven't seen your installs yet but now that you said that I need to search one out ;)

@Punishment718

6 жыл бұрын

lol, don't see yourself short R/T Life. You are unofficially my research and development department. lol

@moparchallenger749

5 жыл бұрын

BLUE HULK Mine too 👍

I subscribed- I like how you don't speed through your tutorials and take the time to explain. Very good video in my opinion. Keep up the great work!

@WorkPlayDrive

3 жыл бұрын

Thank you 🙏

Just watched, very detailed. Just installed in my Charger. Now it's time to play

@WorkPlayDrive

5 жыл бұрын

Oh yeah! Have fun!

Thank you so much! I just ordered and received mine today, and I’m going to install it myself. This video helped me so much and gave me the confidence to do it.

@WorkPlayDrive

3 жыл бұрын

Awesome glad to help

Even if I am not doing the mod in the title I always watch because your vids are easy to follow and straight to the point. Very educational and after watching then I say hmmmmm maybe I will do this mod always inspired. Don’t forget to think about sub meet and great

Thank you for this video! I purchased the Taser for my Charger and followed you on my phone as I went through the install, step by step. Couldn’t have done it without you!

@WorkPlayDrive

2 жыл бұрын

Thank you

You did an exceptional job explaining this. I've seen videos where people had no damn clue wtf they were talking about and took longer to explain. Thanks for sharing this video. You're awesome.

@WorkPlayDrive

4 жыл бұрын

Thank you 🙏

Very informative, and I like how you walked us through step-by-step. You made it very simple, Z automotive should put this your video on their website. Excellent video, great channel

@WorkPlayDrive

3 жыл бұрын

I appreciate that, Thank you. zAutomotive used to have this one up on their video tutorial site but it appears broken at the moment. ;)

Always love your videos and attention to details.

@WorkPlayDrive

6 жыл бұрын

thank you!

Great video, bought my 18 challenger last October, was weary of putting anything in it like this. Appreciate the video.

@WorkPlayDrive

6 жыл бұрын

Congrats, it took me a while before I modded the car, once I started though, it's hard to stop. My wife thinks I have a problem :)

Nice to see you back ...... wow awesome kit ...

Awesome video ! Best instruction for this I've seen yet.

@WorkPlayDrive

5 жыл бұрын

Thank you!

Thanks for the vid. My Trinity t2 just came so I will relocate the Tazer to the trunk.

@WorkPlayDrive

6 жыл бұрын

Much better than having a splitter 👌

Great video good camera angles you just got my subscription thanks !!

@WorkPlayDrive

4 жыл бұрын

Thank you 😊

Thanks man your video was useful! I panicked a little when I got my taser for my 2018 ! Thanks !!!

@WorkPlayDrive

6 жыл бұрын

Awesome, glad to help!

They've got great products, and have the burnbox on my Challenger SRT8. If you like doing alotta burnouts, it's a must and is one of the greatest innovations made in a long time. They make it so that you don't have to tap into the hydraulics anymore, and save the brakes from burning up as well. So there's a lot of pluses about them, and should be on every modern muscle car

Informative and detailed as always. Just got mine using your code. Thanks again!

@WorkPlayDrive

6 жыл бұрын

Awesome thank you!

@billyquinn2162

6 жыл бұрын

By the way, where did you get that awesome hood prop? I want one!

@WorkPlayDrive

6 жыл бұрын

I had it made at RR Metal Works LLC - CNC Plasma Cutting & Metal Fabrication. Great guy!

Beautifuly done, thank you. Installing one on my daytona392

Great video. Just subscribed. Very well done. 👍👍

@WorkPlayDrive

6 жыл бұрын

Thank you!

Thank you! Install went great!

Wow, always with the coolest gadgets, great video bro 😉😁

@WorkPlayDrive

6 жыл бұрын

Thank you

Excellent video! I'll be installing mine tonight after work. The neighbors will get used to the burnouts eventually. LOL I will likely need tires and bail money soon.

@WorkPlayDrive

Жыл бұрын

🤣🤣👮‍♂️

New sub here thanks to Growl's garage. Very good install video. Thank you.

@WorkPlayDrive

6 жыл бұрын

Thank you and Growls is the man!

Excellent tutorial dude!

@WorkPlayDrive

6 жыл бұрын

Thank you!

Thanks im not good with electronics but this made it look simple i know its not but will try it. Thanks again john

@WorkPlayDrive

6 жыл бұрын

It's pretty easy to be honest it's plug and go, the hardest part it loosening the 10MM bold for the ground :)

Like always... another great install video....

@WorkPlayDrive

6 жыл бұрын

Thank you!

Thanks this vid gave me just enough info (pic of the plug to see the clip and which way it has to move) to determine how to removed the plugs at the STAR connector.

This is going to be a nice addition to the Tazer. I have knocked mine off smacking the clutch. Thanks for the video!!

I got installed no problem thanks to you thank you sir 🙏

@WorkPlayDrive

Жыл бұрын

Glad to help 💪

Nice 👍🏻 video thanks for the info!

@WorkPlayDrive

4 жыл бұрын

Thank you 🙏

Thanks so much!

Appreciate this video! Super easy

@WorkPlayDrive

5 жыл бұрын

Glad to Help!

Good video man👍

@WorkPlayDrive

5 жыл бұрын

Thank you!

Nice video

@WorkPlayDrive

5 жыл бұрын

Thank you!

Look at FCA, when we decide to have a little fun with the cars they want to try and take it away. I like this idea a lot and I will eventually do it. I like the out of sight out of mind thought of it being in the trunk

@aibr

3 жыл бұрын

It was done not only to prevent DIY: www.wired.com/2015/07/hackers-remotely-kill-jeep-highway/

I put mine in and attached it to the Harmon speaker. I used the code as well.

@WorkPlayDrive

6 жыл бұрын

I've got the Alpine so no Bump in my trunk :( How do you like the Harmon system?

@James-Orr

6 жыл бұрын

I know a lot of guys say its junk but I really like it a lot over the sound group 1 and 2. I'm not famialr with high end systems but this one is nice for me.

Life saver subscribed

@WorkPlayDrive

6 жыл бұрын

Glad to help!

Great video, wish I would have found it before I did my install lol. If you have a MOPAR and are on the fence about getting a TaZer, just do it. There aren't many other ~$300 upgrades that will give you as much functionality as this does.

@WorkPlayDrive

5 жыл бұрын

So true worth it for the line lock alone.

Awesome video man. Thanks for taking the time to do this.

@WorkPlayDrive

5 жыл бұрын

Thank you!

Man this has got to be one of the cleanest tutorials on this Tazer! I just brought a 2018 Charger V6 sxt plus & debating whether or not this is a good buy? I hear it adds the accessories I already have like (easy exit, paddle switches, driving mode). I'm looking to get more power than it currently has & I was told this or the pedal commander would be a good 1st start? In ur opinion which would u recommend?

Thank you for this tutorial! It actually helped me with installation better than the official manual. On a side note, during the procedure I was hating Dodge engineering even more than while replacing the light bulbs. The car looks so nice and refined on the outside, and inside everything is so hard accessible, cheap and flimsy! I still love my Charger, but I wish it was better thought through.

Great video. Very informative. Do the srt pages improve the driving experience? For example, more aggressive shifts? I don't care too much about light shows.

@WorkPlayDrive

5 жыл бұрын

Yes for the scat pack the SRT pages and track mode on the automatic make for more aggressive throttle and shifts

Good man

Sounds like a some new features are coming to the taZer

@WorkPlayDrive

Жыл бұрын

Check my latest video kzread.info/dash/bejne/m3ac0cutmqaphto.html

OBD2 not ODB2. On Board Diagnostic Port. Next you'll say clutch fan.... Otherwise, great work, keep it coming.

I like this. I have big feet and I keep kicking the Tazer when I apply the parking break. This will eliminate that issue. Thanks.

@WorkPlayDrive

6 жыл бұрын

Absolutely 💪

@stevee318

5 жыл бұрын

I think your tutorial was perfect. I received this yesterday and the install was exactly the same for my 16' Charger ScatPack. The only difference was the colors of the pins that get plugged into the box. Mine were blue and black. I looked at your video again to see what wires were plugged into the pins. The wires are the same colors but did not plug into the same sides of the box that yours did. But the pins will only plug into the correct socket anyway. But the Tazer works perfectly and now I do not have to worry about kicking the Tazer out of the OBD 2 port when I set the parking break.

Nice install video for the bypass plug. I have an 18 and would need to do this to get a Tazer, haven't made the decision yet. New sub from R/T Life's video. Look forward to seeing some more of your content!

@WorkPlayDrive

6 жыл бұрын

Thank you, I just found R/T life myself, trying to catch up on his videos :0

Great vid thanks for this! I picked up a 2019 scat I'm just trying to catch up so my question is do you think that there's a used market for tasers where I could just buy one unlock the features I want and resell it?

@WorkPlayDrive

3 жыл бұрын

Nope the TaZer marries to a vehicle. If you make the changes and sell it the next person needs to pay an additional $50 to unlock the TaZer that’s married to your car. If you unmarry before selling it returns your car to stock. If you buy used you need to make sure the TaZer is unmarried.

Awesome vid.. TaZer in...! Easy Peasy just like the video says. Thumbs ↑

Hey man! Have you heard of the Demon pages will eventually be available? The Hellcat Splash is awesome but the demon Splash would just be plain sick! Plus I obviously the SRT pages are a must-have for any Scat Pack owner. Thank you in advance.

@WorkPlayDrive

6 жыл бұрын

Not sure about the older models from what I know the TaZer only unlocks what is native in the car.

sweet always wanted to know what this was

Hey man! Great video! I have 2018 Durango R/T you think i will be having problems when going to the dealership? meaning do i have to take it off everytime im going to the dealership? thanks!

@WorkPlayDrive

6 жыл бұрын

I would recommend unmarry and pull it out to avoid any shenanigans with the techs.

New sub here and new to the 2018 challenger. Quick question, with this bypass can I install a tune from Diablo without having to have the pcm unlocked?

@WorkPlayDrive

5 жыл бұрын

Nope this only bypasses the lock FCA out on the front ODBII port. Sadly you still need to unlock the PCM to get a tune.

Just did the double bypass in my 2015 Scat Pack. Didn't need it but it's a cleaner look with the Tazer hidden away. The install was a piece of cake thanks to your detailed video. I appreciate the effort you put into doing these for us! FYI if you didn't know already but I didn't get the 5% off using the discount code ... apparently it only works for orders over $200 :(

@WorkPlayDrive

6 жыл бұрын

Glad to help, sorry about the discount, I contacted them to fix the issue last week.

Curious if there will be any long tube header or cam install videos for the SP in the foreseeable future?

@WorkPlayDrive

6 жыл бұрын

Planning is in progress for some major upgrades under the hood Spring/Summer of 2019. The parts list is growing, I can say headers are on the list along with stuffing a su.... ;)

In my 2019 scatpack challenger can the taxer add navigation my car has everything else except the light show which is cool but I don’t need it currently uses nav through apple CarPlay an flashes to the radio

Great video. I have a 2015 Charger RT. Can I still use the double bypass in the trunk to free up my OBDII port?

@WorkPlayDrive

Жыл бұрын

Absolutely in fact, a lot of people use the double bypass so they can hide the tazer from the dealership and also use a tuner at the same time.

Finally purchased my double bypass, great video, very helpful. For some reason the discount code did not work. Tried emailing them, so far no response.

@WorkPlayDrive

5 жыл бұрын

Glad to help, sadly my code expired, but I'll have a new one in a few weeks.

@brewaire

5 жыл бұрын

@@WorkPlayDrive thanks for the response and all your helpful videos.

I know this video is a few years old. But can you unlock a front camera option in Uconnect for 2021 Charger?

Gonna pull the trigger on the '20 Challenger sp wb... would this mod void any sort of warranty? Is it best to wait until such warranties expire before doing these sort of mods? Thanks for a very informative video. I'm an aircraft mechanic by trade and somewhat of a perfectionist myself, so I appreciate your attention to detail.😎👍🏻

@WorkPlayDrive

4 жыл бұрын

Thank you, I never had issues, but I also never took the car to the dealer during the 4 years I owned it. I got lucky and had no major issues and the ones I did have I fixed my self for content. ;) If I did to avoid any individual dealership issues I would remove when getting the car serviced. Regarding the warranty here is info from their site. Q: Will this void my warranty? A: Per the Magnusson-Moss Warranty Act (1975), a manufacturer can only deny a warranty claim when an aftermarket component is used if they can prove that the component caused the failure. Simply write down the settings that you used the Tazer to change, and change them back to their original values before service - it’ll be as if it was never used. As for “live” features such as light shows, line lock, full ESP disable, nav in motion, force video - use of those features can’t be detected.

@davefortexas3245

4 жыл бұрын

@@WorkPlayDrive ... Good to know... thanks again.👍🏻

Any Idea if this will cause a problem with smog inspections? Wish I had watched your video prior to ordering, could have saved 5% :-) Great video. New subscriber here. 2018 Challenger SCAT.

@WorkPlayDrive

6 жыл бұрын

Thank you for the sub, there is no way it can affect your inspection. All factory parts are still in place.

@deanrackley4917

6 жыл бұрын

Work Play Drive thanks for the quick reply

Mike stupid question , should I plug the tazer in under the dash and marry it before installing the double by pass in trunk ? Or can I just first time marry it from the double by pass ?

@WorkPlayDrive

Жыл бұрын

You can marry from either location both are on the same bus 👍

@Work Play Drive So, in case someone hasn’t answered or asked this, if my dealer is the one doing oil changes and routine maintenance on this would this be a good idea to keep this plugged in. I know you can just “unmarry” up front but i would hate to have a voided warranty. Thanks and I would greatly appreciate your feedback

@WorkPlayDrive

5 жыл бұрын

Depends on the dealership. If you don't feel comfortable you can un-marry before each visit removed any traces of the tazer being installed. Again for them to void your warranty on a specific area they would need to prove the TaZer was the cause of that specific item breaking. Look up the "Magnuson Moss Warranty act"

Did you have any issues installing this? Seems I need to do this to replace my PCM and get a tuner. I’m really worried about installing this. Any feedback would be greatly appreciated!

@WorkPlayDrive

5 жыл бұрын

None at all, the install is super simple.

Did this to my 18 charger few weeks ago. So what I am wondering is when Diablo sport comes out with the unlocked pcm and tuner for the 2018 models will I have to still use the trunk location or will the unlocked pcm give me access to the default OBD-ll port.

@WorkPlayDrive

6 жыл бұрын

Still haven't wrapped my head around the infotainment security, I guess you'll find out soon ;)

@challengerman6076

5 жыл бұрын

I have the same exact question.

I have T/A "392". I'm thinking of getting a Diablo with a i tuner and purchasing a Jay Greene with a Fastman TB. Would this enhance the Jay Greene or would add an extra un-needed factor?

@WorkPlayDrive

5 жыл бұрын

The Tazer does not tune the car, it simply unlocks or changes settings that already exist in the car. check out all the features the TaZer will provide zautomotive.com/zpu/instructions/tazer_user_guide_2.4.3.pdf

did you keep the blue wire with the red tazer wire in the trunk? or disconnected the blue?

Make sure the hot side of the fuse tap is on the correct side, Ive seen vehicle fires happen using those incorrect

@Erskin_S

5 жыл бұрын

robfrmny21 what do you mean by the hot side ..

My OCD would have turned the negative connecter by the battery to face downward. Would you uninstall all of this if you had to take your car to the dealer for service or warranty work ?

Very good.Could you make a video How to unistall the tazer ?

Do you know if it is the same setup for 18 durango srt. The battery is under the front passenger seat.

Hi can you tell me what is for that green conector (white+blue cable)? Thank you so much 🙏🏻

@WorkPlayDrive

Жыл бұрын

Would you mind sharing the time in the video where the cable appears?

Do you still have to go thru the steering wheel buttons to unlock everything thing like the old way

@WorkPlayDrive

5 жыл бұрын

Yes the tazer still performs the same.

Fully prepared to get flak for this question, but I want to make sure I get this right the first time without complications down the road... Easy enough question: Do I need to disconnect the battery before installation?

@WorkPlayDrive

3 жыл бұрын

For safety yes it only takes about 20 seconds to pull the negative battery terminal ;)

@darkphantom120

3 жыл бұрын

@@WorkPlayDrive Thanks for that speedy reply :)

Lucky me with my 2018 This doesn’t look hard a bit of a pita compared to the old way. Will this process need to be undone every time before dealer visits?

@WorkPlayDrive

6 жыл бұрын

I would say the dealer won't notice the double bypass if you move it away from the battery. I would still unplug the TaZer and reset to stock before visiting the dealer.

@ms3ben

6 жыл бұрын

I’ll probably just remove it all together before any serious visit. I doubt they’ll be messing with the battery area for an oil change visit.

Nice video, did mine but whenever I start my car radio kept on shutting down...What should I do...?

Hi, I have the tazer on my 2015 Scat Pack Shaker and I love it, now I can ride with my yellow light and small fog light. I changed my scat pack for a 2019 scat pack widwbody and I do not see the use of tazer .... I do not show light and I'm no fog light ...

@WorkPlayDrive

5 жыл бұрын

Sorry for the 2019s you need to contact Zautomotive support I have no experience with the 2019s

I have a 2018 RT but with a G2 burnbox can I use it on my 2020 scat pack?

Just got a 2019 R/T (Challenger)… I was pretty confident that R/T come with performance pages and the ability to see fastest 1/4 mile along with highest top speed but all I can see in my instrument cluster is my fastest 0-60 time, and nothing at all on my touch screen. I've driven over 500 miles too... (initially thought I'd have to 'unlock' these features). Do I need the Tazer or was my car supposed to have all this?

@WorkPlayDrive

5 жыл бұрын

If you have the 8.4 uConnect and super track pack you will have the performance pages. This was on 2015-2018 pretty sure 2019 as well.

@christopherjanssen8332

5 жыл бұрын

@@WorkPlayDrive I just have the 7.0 uconnect. That being said on Dodge's website if you go to build a 2019 RT before adding a single package it shows that it comes standard with the 'super track pack' when you click 'view summary'.... but I do not have a Super Track Pack button or menu on my uConnect so either their website is wrong or my car somehow is missing things it should have :( I'm guessing I'll now need to get a Tazer huh.

@WorkPlayDrive

5 жыл бұрын

Just check with the zAutomotive guys for the 2019 features. Not sure if they posted it yet.

I have a question if anyone can help. I own a 2018 Dodge Durango r/t, the instructions on the site state to install the security bypass under the glove compartment /passenger side however every video I watch it gets installed in the trunk ? I asked Z-Automotive and they directed me to this video. Just want to make sure I am capable of installing it myself prior to purchasing. Thank you in advance.

Do you keep your tazer plugged in all the time in trunk been hearing people have trouble with battery drainage using the tazer

@WorkPlayDrive

6 жыл бұрын

Yes I do, even while away 2 weeks a month I have no issues with my battery. There was an issue with an older firmware, if you are on the latest you should not have an issue.

@TheShawn3636

6 жыл бұрын

Work Play Drive thanks

Have you had any issues with dead battery? I left Tazer mounted in the trunk and battery was dead after one day. I might move fuse to switchable fuse for charge port in console.

@WorkPlayDrive

6 жыл бұрын

James Orr No I’ve left my car for a few weeks while I’m away tazer plugged in with no issues. Make sure you have the latest firmware installed. There was a bug in the original release that caused it to stay on.

@jamesorr2855

6 жыл бұрын

Work Play Drive mine stayed plugged in all the time with original obd port. Battery dies after moving to trunk is weird. I'll recharge and see if I did something weird lol. I'm also Puss n Boost but from my phone it changes user name??

zautomotive includes the double bypass with TaZer now for 299 for 2018

@WorkPlayDrive

5 жыл бұрын

Awesome 👍

I removed the double bypass from my Challenger because I need to take it to the dealer for servicing and I accidentally broke the white connector and it’s stuck in the bus. I tried to use a vice grip to pull it out and I messed it up pretty bad. How can I get the connector out without causing any damage to the bus?

Do you have to leave the tazer plugged in or can you take it out

@WorkPlayDrive

6 жыл бұрын

The TaZer has 2 feature sets on where it makes changes to settings in your car, then it can be removed and the other "Live" settings that require the TaZer to be plugged in. You can find a detailed list of features in their FAQ

What about for 7” Uconnect does the srt feature work on it

I have a '13 RT Challenger so don't have to do this but I am thinking about a newer one. Does this make it so you don't have to buy an unlocked pcm?

@WorkPlayDrive

4 жыл бұрын

No the PCM is not touched, you would still need to have it unlocked for a tuner. For pre 2018 this is a great way to add a second OBDII port

Hi thanks for the video. I have an issue with my 2018 ta 392. My srt pages don't show srt modes work . Just the regular performance pages that I had with my car. Thanks.

@WorkPlayDrive

6 жыл бұрын

Have you done the fuse pull to reset the 2018 radio as per the instructions?

@Demonjr.1320

6 жыл бұрын

Work Play Drive I did that twice

@Demonjr.1320

6 жыл бұрын

Work Play Drive everything works except SRT pages. I got the aux buttons on steering wheel to work also.

@Demonjr.1320

6 жыл бұрын

Work Play Drive I guess 2018 can't get SRT pages just the regular performance pages

@WorkPlayDrive

6 жыл бұрын

you may want to contact zAutomotive for support. the 2018 uConnect does not reset so the fuse pull is what gets the SRT pages to work. if that's not working for you maybe they have another fix.

@Work Play Drive I am having some trouble, my tazer is hooked up but when I go to audio, my car doesn’t have the preferences????

@WorkPlayDrive

4 жыл бұрын

What is the Year make and model of the car?

@davidtolbertiv6446

4 жыл бұрын

Work Play Drive 2018 Daytona Charger 392. It’s definitely hooked up because it shows the tazer firmware, I have the marry and un marry but it doesn’t have the performance with the question mark when I toggle through so what’s going on ?

@davidtolbertiv6446

4 жыл бұрын

Work Play Drive help me with the tazer man, do you have to reeboot as soon as you hook up the tazer ?

I have a 2018 Charger Blacktop Edition with the 7 inch screen. So it's basically a base model with an appearance package. What benefits can I get from the tazer?

@WorkPlayDrive

6 жыл бұрын

Check this document, there are different features involved with each trim level zautomotive.com/zpu/instructions/tazer_user_guide_2.4.3.pdf

@EssDot704

6 жыл бұрын

Work Play Drive Thanks for the quick resoonse. That helped alot!

@WorkPlayDrive

6 жыл бұрын

No problemo!

my bypass has black connectors which is the green or white or does it make a difference on wire hook up ? Z did not make it easy for me.

@WorkPlayDrive

6 жыл бұрын

that's not cool :/ what about the wiring colors? Green and yellow on mine have the White connector and Blue and White had the green connector. I hope that can help ;)

@raymincy2085

6 жыл бұрын

They did great at Z. They got back to me and told me that the Black goes to the white side and I also had a blue connector that goes to green side. I’m all hooked up and running great. Love the set up and feel on the Daytona 392 with the SRT set up now. Having trouble on getting the light show the way I want , but I’m not to concerned with that. Will get it set as I go. Once again thanks for the video and information.

Does this bypass also power other obd2 devices? Or only the tazer

@WorkPlayDrive

3 ай бұрын

It will power other OBD2 devices. It’s like a 2nd port without the need for a splitter.

Do you have a video for a 2019 Ram 3500 using the TAZER Ram??

@WorkPlayDrive

4 жыл бұрын

Nope sorry only the challenger.

Do you ha e to remove the device if getting serviced at the dealership?

@WorkPlayDrive

5 жыл бұрын

I would recommend un-marry and remove just to avoid conflict

Very nice man u do it so smooth. But the discount code not working 😕

@WorkPlayDrive

5 жыл бұрын

I've got another code that I believe is still working for a few more days wpdbeta244 was supposed to expire April 25th but I was told it's still active.

@superuser87

5 жыл бұрын

@@WorkPlayDrive thanks man! Yes the code is work and i ordered my tazer yesterday. Keep it up 👍

I have a 2015 scat pack and can't get this to work. The burnbox works when in the obd2 port but not in the double bypass that i hooked up.

@WorkPlayDrive

6 жыл бұрын

It's possible the power is not connected correctly? If not I would contact Support.

@john19812003

6 жыл бұрын

Work Play Drive Yea i pulled it today and found the fuse they sent with it was actually broken, not blown or burnt just separated. I put a new one in and works now. Thanks. I used your vid for the install too.

Is it the same process for 2012 dodge charger?

Do I have to update it when I get it on the computer or would it be ready to go

@WorkPlayDrive

2 жыл бұрын

When I received mine it had the latest version. But that was a few years ago not sure what they are shipping with now