The logo is outstanding. The contrast there will be terrific and while the "Dodge" is now absent, I think that adds a lot of "zing" to the back-end.

logo looks amazing embossed. Definitely about to add that to my list of mods

Unbelievable. I was skeptical through the entire video until the end. I wish you had a Charger as well to do things like this to. Love it!

@WorkPlayDrive

6 жыл бұрын

Thanks man 🙏 Go give Hemifam a follow he’s my charger owning brother from another mother.

Your video came in perfect timing! I have been looking to wrap my trunk lid! Awesome video!

@WorkPlayDrive

4 жыл бұрын

Thank you they have pre made kits now based on my design at luxe. bit.ly/Luxe3layer I have a discount with them code WorkPlayDrive

Got DAMN man. I gotta say this is a perfect solution for the divider. I am amazed. Thanks for the idea

@WorkPlayDrive

5 жыл бұрын

Just a heads up my buddies over at Luxe Auto Concepts now makes a kit precut for this purpose. bit.ly/2nYi2FP Taillight flag 3 layer bit.ly/2EEyQI7 Taillight one layer You can use code WorkPlayDrive and save 15% on your order 💪

I think that is very creative, when you go to car shows, that's when it's going to be noticed and appreciated, nice job

@WorkPlayDrive

6 жыл бұрын

Thanks man!

@mopar3925

6 жыл бұрын

Work Play Drive I have a TA 392 Challenger, with the same issues

I'm digging the decal at the beginning and I did pause the video to type this. I just bought a new 2022 Challenger and as a matter of fact... I noticed a bunch of scratches in the same spot on my car so I definitely need to watch and finish this video because I have less than 1500 miles on the clock and see a bunch of freaking scratches and not happy about it at all. Just bought the car a month ago and its totally mint everywhere else on the car but right there and its driving me crazy with my ocd... I gotta do something about this too lol !!!

I really like how it looks! You did a nice job. Love the logo! Thank you for a great video! Learned a lot!

@WorkPlayDrive

2 жыл бұрын

Thank you 🙏

Dude, that looks awesome! I'd never trust myself to do something like that. Great job.

@WorkPlayDrive

2 жыл бұрын

It’s very easy and Luxe sells kits so it’s now even easier. bit.ly/Luxe3layer

You have amazing attention to detail. Your like a surgeon when you work on the car.

@WorkPlayDrive

6 жыл бұрын

Thanks man, i really enjoy my time with this car.

Awesome look! I have always wondered what to do with that space. I removed the DODGE logos as well and use some plastix scratch remover to clean it up. Stays good for a while but after a few washes, it has swirls again. Finally i bit the bullet and had the car coated is ceramic 9h pro and all my issues went away. Now i have a swirl free car and the ceramic 9h pro keeps it that way.

@WorkPlayDrive

7 жыл бұрын

Thank you, same issue it would never stay scratch free. I agree Ceramic coating is a great option, but for my plans with wrapping the car I could not get my car coated since the coating would not allow the wrap to stick.

I keep a larger black umbrella that I use for photography to get rid of the reflection problems when needing to get details done on the paint.

I love the mat black tail panel, it's a great alternative to the stock piano black, thanks for the write up and video.

@WorkPlayDrive

7 жыл бұрын

No problem, it;'s held up very well so far!

Logo looks good, this was awesome idea!

@WorkPlayDrive

7 жыл бұрын

Thank you

I absolutely love your channel. My most favorote and the best channel ever! Thank you. Aloha from Hawaii.

@WorkPlayDrive

4 жыл бұрын

Aloha! And thank you

I'm all in on a decal, that you put on the back

Hell yeah bro... final product looks Saaaweet !! Awesome job and killer idea. Thanks for the cool vid... I've always wondered how vinyl was done...

@WorkPlayDrive

2 жыл бұрын

Thank you 🙏

@johnmeek6790

2 жыл бұрын

@@WorkPlayDrive You're welcome and thank you for all of your top notch very informative videos. I like watching videos that teach me things and your videos are always well put together and always worth watching from beginning to end. I haven't browsed your entire playlist yet but I'm going to binge watch them all when I have the free time and I know I'm going to gain a treasure trove of information. Keep these videos coming and thank you for the professionalism content. Your videos are better then most Challenger videos out there in my opinion.

@WorkPlayDrive

2 жыл бұрын

Thank you 🙏 you gotta pace yourself otherwise your wallet is going to get very upset

I did this after watching the video and it looks GREAT! combine this with the Luxe covers in the rear and it looks better ... and very unique. I put an emblem that says Challenger between the tail lights under the vinyl wrap and it looks mean.

@WorkPlayDrive

7 жыл бұрын

Absolutely, love my back end after doing this. If you can Tag me in one of the photos so I can check it out.

No better promotion that self promotion. I like the idea and the execution. Keep being innovating.

@WorkPlayDrive

7 жыл бұрын

Thanks man, how are things going over there? once a week I click on your channel close my eyes and wish for an "It's back and better than ever" video.

@TheBlackScatPack

7 жыл бұрын

Work Play Drive I haven't been back to check on the car in almost 2 weeks but it was getting close to prime and paint then. I'm ready to get it back and that video will come because I'm soooooo ready to make it.

@WorkPlayDrive

7 жыл бұрын

I'll keep clicking and hoping.... are you changing the color or anything crazy?

@TheBlackScatPack

7 жыл бұрын

Work Play Drive it will be the same color but the difference will be night and day. Just be on the look out very soon.

EXCELLENT video!! I like the look and logo.

@WorkPlayDrive

6 жыл бұрын

Thank you

Great idea, nice Logo 👍 Had same problem I use a plastic polish to hide them for a bit, good idea with the closer.

@WorkPlayDrive

7 жыл бұрын

Thanks man, I'm very happy with this one, I'm surprised I never found that strap sooner.

I've got a burnishing tool that I got from an overstock store that would work for the detail work inthe "embossing" idea. A thicker initial vinyl might help to emphasize the logo too. This is cool! (you've just started cutting away material).

Very Creative! Great Video as always! Thanks!

@WorkPlayDrive

7 жыл бұрын

Thank you

Really cool Idea. Looks awesome man

@WorkPlayDrive

2 жыл бұрын

Thank you 🙏

Nicely done! I went a different route to rid myself of the same problem, but (as with many of your videos) I appreciate your creativity.

@WorkPlayDrive

7 жыл бұрын

Thank you, what did you wind up doing?

@clarkmaier3304

7 жыл бұрын

I removed Dodge lettering, made a license-plate size backplate out of diamond tread aluminum, painted it black, and affixed to it a 13" 3D printed "Challenger" in the Challenger script after painting it. I also installed U-channel rubber molding (with open channel facing upwards} all along that seam above the tail lights; it eliminated 80-90% of the dreaded "trunk weeping" after washing.

@WorkPlayDrive

7 жыл бұрын

I've seen this online real nice!!! Pavasteeler?

@clarkmaier3304

7 жыл бұрын

That's me!

came out awesome! You're more brave than I am. I couldnt do that myself to my challenger

@WorkPlayDrive

7 жыл бұрын

Thank you! This mod isn't too difficult, just takes a little patience.

Incredible attention to detail 👍🏾

@WorkPlayDrive

6 жыл бұрын

Thank you 🙏

I swear this area gets scratched up on its own. I have had scratches show up even when I haven’t accessed the trunk in awhile. I live in a dusty environment though. Interesting solution, and as always an informative video

@WorkPlayDrive

6 жыл бұрын

I gave up on dealing with the scratches. The 3M 1080 matte black has held up well

@granitecat7077

5 жыл бұрын

Pops Smith you’re right, I’ve polished them out and they’re gone for a good while then all of a sudden there’s more scratches

decal was a great idea! makes you unique and show who you are!

@WorkPlayDrive

7 жыл бұрын

Thanks brother!

love it, what a great idea! mine is all scratched as well. I think I would want to do the entire panel tho.

@WorkPlayDrive

7 жыл бұрын

it's doable, the taillights give you a nice line to tape with the knife less. I saw a car at #SF12 with a printed wrap on the whole back panel around the lights, it' looked real nice.

Nothing beats personalizing your car tastefully while also looking sleek

@WorkPlayDrive

7 жыл бұрын

Agreed and Thank you!

changed the game, this is one of the most coolest mods on a challenger, I want this now, wow, great job

@WorkPlayDrive

7 жыл бұрын

:) Thanks, do it! It's not too hard or expensive, I love looking at it! This is one of those mods I am proud to show off.

@travshhemichallengertravsh3846

7 жыл бұрын

it would be awesome if luxe offered a kit similar to what you've done. i'd love to just matte the center out

@WorkPlayDrive

7 жыл бұрын

I've been talking to the owner about this, hopefully we can put something together no make this an easier DIY pre-cut solution.

@travshhemichallengertravsh3846

7 жыл бұрын

that would be amazing if there was some type of kit you could come up with, doesn't seem too expensive and I know i'd buy it if its not too difficult, while not having to hire a detail guy to install it. seems like such a great dyi project and it seems like no one else has come up with something creative to use that space other than a badge delete, good work!

@WorkPlayDrive

7 жыл бұрын

Thank you and I'm working with the guys at Luxe to try an kit this somehow.

Looks good man, great idea...

@WorkPlayDrive

7 жыл бұрын

Thank you!

Great work man 👍

@WorkPlayDrive

3 жыл бұрын

Thank you 🙏

This was a great idea. Love it.

@WorkPlayDrive

5 жыл бұрын

Thank you!

Nicely done, you've earned my subscription. Looking forward to future content and hoping i can get myself a challenger sometime in the next few years.

@WorkPlayDrive

7 жыл бұрын

Thank you, she's worth the wait, took me 6+ years of admiring before I could get mine.

@Mistah_Random

7 жыл бұрын

Work Play Drive I want to get myself a T/A 392 and put a Shaker on it. A boy can dream.

@WorkPlayDrive

7 жыл бұрын

I love the T/A but adding the shaker takes away from the active intake on the hood. Have you seen the new Super Scat Pack? 6 piston brembos, suspension upgrades and you won't lose anything if you drop a shaker on it! You will of course lose the awesome T/A striping and White gauges though

@Mistah_Random

7 жыл бұрын

Work Play Drive This I did not know, guess I have more research to do.

@WorkPlayDrive

7 жыл бұрын

I just found out about them a few weeks ago myself. Still love the T/A though seriously in love with the destroyer Gray.

I've got the same problem with my Charger. I'm got to use Luxe tint film to cover the entire rear taillight. I like the matte black theme of your car and by the way, the lettering doesn't look that bad from what I can tell. 👍🏾

@WorkPlayDrive

7 жыл бұрын

DK Holloway as soon as we can get the ceramic coating off a friends challenger we will be tinting out his tails with the Luxe DIY kit. He wants all the red gone. Can't wait to try this out.

this is an awesome idea, thanks for sharing!

@WorkPlayDrive

3 жыл бұрын

Thank you 🙏

That came out amazing.

@WorkPlayDrive

6 жыл бұрын

Thank you!

Really unique look, i like it

@WorkPlayDrive

7 жыл бұрын

Thank you!

Great video! Very impressive

@WorkPlayDrive

6 жыл бұрын

Thank you, my pals at Luxe sell kits to do this now. bit.ly/2nYi2FP

You can use a dog collar for the trunk pull, works great and is adjustable.

that looks really good your an artist :D

@WorkPlayDrive

7 жыл бұрын

Thank you :D

Your logo looks dope.

@WorkPlayDrive

7 жыл бұрын

Thanks man!

Love it... you did a great job!

@WorkPlayDrive

7 жыл бұрын

Thank you!

I like it a LOT and also share your frustration in that the Charger's don't have a solid fix for this either. The Jokey, Gooney >SNAP< every time of the plastic insert that we're supposed to grab under the trunk lid is terrible and - inevitably, the spoiler we have becomes a "handle" for both my wife and daughter. This "strap" idea is solid and - I just bought a series of extra ones from Stupid Car Tray. I wonder if those might work too?

@WorkPlayDrive

Жыл бұрын

Not sure but it’s worth a try.

Filling the area between the tail lights with an embossed logo was a great idea. It would be too large if it was any color on black. I like it. I removed the DODGE letters from my Scat Pack and replaced them with a flat black Scat Pack decal. I like the subtle look but like you said the microfiber towel catches the edges of the decal and it doesn't hide the scratches.

@WorkPlayDrive

7 жыл бұрын

I've seen a few with the Scat Bee and really like that decal. one of my original designs was going to be that bee embossed, but I opted for my logo instead.

I'm having the same issue. I deleted the DODGE emblems but now it looks all scratched up and everything I try seems to make it worse. I may do something like you've done. Great idea. thanks...

@WorkPlayDrive

7 жыл бұрын

Thank you! This is a tricky area, I was so done with keeping it perfect.

This looks like an amazing weekend project, loved the way it came out man, keep up the good work. Definitely have to try this out myself.

@WorkPlayDrive

7 жыл бұрын

Thank you, was pretty quick only 2 hours for the debadge and rebadge. Finding something I liked took a few weeks :)

Looks nice!

@WorkPlayDrive

6 жыл бұрын

Thank you 🙏

thank you for your videos especially this one

@WorkPlayDrive

3 жыл бұрын

Thank you 🙏

Use Plexus on that part of the trunk, the spray is made for acrylic and other plastic parts, the spray is mainly used for visors on a motorcycle helmet so it won't scratch as well as wipe with a microfiber cloth towel.

@WorkPlayDrive

7 жыл бұрын

I like the matte finish better for now, but if I ever go back to gloss I'll polish it and give Plexus a shot, it's definitely cheaper than a ceramic coating :)

i love the passion u put in to ur videos ....i hope ur ready to meet up ...cause we need to finally get together ....lol im dieng to take a good video and pix with other mopar youtubers...

@WorkPlayDrive

7 жыл бұрын

I agree man, we have to setup a meet once the weather is stable try and roll up with Honeslty OCD, NJMopar, Greenlight392, SRT B5, sblightsout_is_back and a few others who really love what they drive. It will be a Mega Meet!

Really neat idea, I’ll probably try the same thing except put a dodge logo instead

Looks good

Yea... Looks good 👍🏼 great thinking... I like it 👌🏻

@WorkPlayDrive

7 жыл бұрын

Thank You

First impression: I really like the new logo but was surprised that you didn't include Instagram information as well.

@WorkPlayDrive

7 жыл бұрын

THe IG icon didn't really fit well in my design, I do have a huge one under the hood though for car shows :) instagram.com/p/BO7y3k_DXzV/

that trunk pull is awesome I need to get that i use to close the trunk thru the spoiler but i always left finger prints, now i do a maneuver that is about grabbing the inside and rapidly pulling down and out so a dont get caught lol. yeah i need that trunk pull :) it would be cool and automatic open and close kind of like the charger but I think that one only opens automatically

@WorkPlayDrive

7 жыл бұрын

I found that trunk pull one day while looking up the DIPS Screen for someone. I was like holy crap I need one of these.

Nice touch keep it up!!!

@WorkPlayDrive

7 жыл бұрын

Thank you!

about you logo, It looks pretty nice man and I like the effect that you are tring to accomplish have you think on custom badging made out of enamal or metal I think it would add an extra custom look, nice job I liked the final result

@WorkPlayDrive

7 жыл бұрын

Thank you, I like how it's barely noticeable, but that got me thinking Maybe a custom badge for the front...

I have seen this mod lately in a few challengers, I do agree that it is a pain to deal with that scratchable surface of that area but the subtle/clean design solution that dodge designers put into putting that detail of the dodge badge was the best solution(in my opinion) I find it attractive and simple anything that people wants to do with it is all about taste or preference, some want to be purist some want to stand out. i probable won't do mine but i would like to find a solution to that scratchable glossy surface :)

@WorkPlayDrive

7 жыл бұрын

As another option for you why not debadge lay down the matte film then put the badges back. That was one of my original designs. I was going to black out the badges as well.

Really looks awesome I got a black scat shaker too and have the same problem no matter how careful I am. Are you out of north jersey also?

@WorkPlayDrive

7 жыл бұрын

Thank you, yes North Jersey, if you show your car you should check out our group North Jersey Mopar, we meet up one a week and show up in force to car shows in the tristate areas. I'm looking forward to his season!

Ur amazing bro...really creative..

@WorkPlayDrive

7 жыл бұрын

Thank you!!

Lol came out nice but it really looked good just white more detail. Good job overall

awesome fix for that horrible gloss black scratch collector. I have barely 1000 miles on my scat pack and already have scratches back there...I dont even touch it, the dealership added their custom performance scratch package free of charge.

@WorkPlayDrive

7 жыл бұрын

Lol my was the factory swirl package :) sadly no horsepower gains due to all the wind resistance.

great vid! do you buy chance think the knifeless tape will work on tint? Im trying to tint the red portion of my challenger taillights and im not sure how else to get the precise lines since they dont have custom tint kits for just the red portion.

@WorkPlayDrive

6 жыл бұрын

yes in fact I did this recently on a friends Challenger here is a photo gallery of the light imgur.com/a/QmM9L. I traced just outside of the Red area on the tail light and laid in the New Luxe Dark Smoke. The 10 x 60 kit will give you enough to have a practice run. bit.ly/2xqjQfU (affiliate) and you can also use code workplaydrive for a discount.

I wanted something that overlayed the Dodge logo without having to debadge. Something that just fit right over the Dodge letter but protected the black plastic area. I reached out to Luxe and they don’t make anything that just has a center cut out

@WorkPlayDrive

2 жыл бұрын

I know what you mean, but They unfortunately cannot cut out the logo because it’s trademarked.

i like it and may try this on mine but for me i would want to put the dodge letters back on. Would need to see what options are available to use to put them back on. On the profile underneath, i like it but maybe the side profile would work better.

@WorkPlayDrive

7 жыл бұрын

I'm assuming you can use any automotive grade double stick tape. The original adhesive was toast.... The side profile looks good too, but I wanted my brand on the back for that personal touch.

Nice. That’s so you your logo looks cool. I feel the same way about the scratches on my trunk. I want to read challenger in cursive writing

@WorkPlayDrive

5 жыл бұрын

thanks, Luxe finally started making this kit and they have one with a challenger script check it out here bit.ly/Luxe3layer ;) it's super easy to install too.

@Aliain12

5 жыл бұрын

Thanks. I also want the honey comb for the tail lights I think you had it and took it off. Where could I shop for one like that, honey comb for tail light/ hash lights

@WorkPlayDrive

5 жыл бұрын

For the taillights you can grab the roll from here kzread.info?v=He2511sfe7Q&redir_token=WWpIxBspBJyclwdx6IxFKHOZ36B8MTU2Mzg1NTkxMEAxNTYzNzY5NTEw&event=video_description&q=https%3A%2F%2Fluxe-auto-concepts.myshopify.com%2Fcollections%2Fdodge-challenger-products%2Fproducts%2F2015-challenger-full-taillight-tint-kit%3Frfsn%3D498004.152f9f I also have a ton of links in the description of this video on what you need to install. kzread.info/dash/bejne/eplml5Nqo8nLZ7Q.html

Great instructional video. My only question is did u use that tape to cut out the dodge lettering, u kind of blazed right thru it

@WorkPlayDrive

4 жыл бұрын

Nope with just a little heat the pop right off. My new method is to use a small plastic pry tool and without touching the black plastic catch the edge of the letter and lift.

Quick question. What do u recommend to take out scratches from the taillight divider? Mine has kind off a big scratch on it and was wondering how to at least make it look not as bad.

@WorkPlayDrive

6 жыл бұрын

For this you may want to go to a pro. Depending on the depth it’s a mix of different pads and grits to take out the scratch then polish it out. It takes some skill not to burn the plastic.

hey do you know if that knifeless tape would work with vinyl tint film? I have a 2015 challenger and been wanting tint out my tail lights completely but I'm horrible at cutting vinyl clean and straight. I'm probably gonna curve it around the light like kinda how you are doing.

@WorkPlayDrive

7 жыл бұрын

The knife less should work, funny you should say that... I have a roll of Vinyl tint waiting for application on a 15 hellcat, we are going to trace to the outside of the red ovals so the entire tail is blacked out. There has been a delay though, I'm waiting for him to have his ceramic coating removed from the lights so the vinyl will stick.

Good lord man, don't damage the "D". Nice work, clever idea with the embossed look.

@WorkPlayDrive

7 жыл бұрын

Ha Ha! Thanks man, you'll be happy to know the "damage to the D" disappeared after 1 day it's perfect now.

Wow! I like fell asleep with the vinyl. What happened?

WHAT ABOUT THE WIDESPREAD PROBLEM OF WATER LEAKING INTO LED TAIL LIGHTS ON CHALLENGERS?🤔

@WorkPlayDrive

3 жыл бұрын

I’ve had 2 2015+ challengers no leaks. Are you having issues.

thought only mine was scratched up. from afar no one will notices but when up close plenty some scratches. really annoys me but idk what ia a solution for this WITH keeping my dodge logo

@WorkPlayDrive

5 жыл бұрын

you can grab one of the options from Luxe that has 3 layers and puts back the logo bit.ly/2OWN2B0

Looks good. The way you were talking reminded me of Bob Ross...

@WorkPlayDrive

7 жыл бұрын

Thank you and lol at the Bob Ross. "Lets just go ahead and pull these Happy little dodge emblems.... "

when you debadge the dodge logo was there any discoloration underneath? any trace of the letters being there afterwards? please advise

@WorkPlayDrive

7 жыл бұрын

On mine there as no scratches where the badge was so it was noticeable, When I did my friends car yesterday it was really noticeable. when you debadge the plastic you will need to polish the area to make it even.

That divider/center always bothered me; sorta cheap-ish looking and begs to be scratched... Thanks for the Luxe discount; just ordered some for my SRT.

@WorkPlayDrive

5 жыл бұрын

Nice, just ordered a new one for my hellcat last week, waiting for the weather to break so I can install

Nice Touch ,,, Thanks.

@WorkPlayDrive

7 жыл бұрын

Thank you!

I just noticed me e on my badge just broke I’ve had my challenger for three months, should I just remove the entire badge?

@WorkPlayDrive

4 жыл бұрын

It's up to you, you can replace it, remove it or go with a custom one...

Anyone know how to adjust the trunk on these challengers to get the lights even?

@WorkPlayDrive

7 жыл бұрын

The trunk lid is adjusted at a few points, depending on how bad your alignment is you may be able to adjust in the following order. - If the trunk lid is aligned with the top of the fenders perfectly and the lights are not you should be able to open the trunk and loosen the wing nuts holding the lights in place depending on the alignment you may need to adjust the lights in the right or left fender or the assembly in the trunk lid. Loosen the wingnuts just enough to allow the light to move, but remain still so you can pop open the trunk and tighten once perfect. Close the trunk adjust all lights to your liking then open and tighten them down. - if the trunk lid AND lights are off a bit the over slam bumpers are your first adjustment. These are hex head rubber pieces that can be turned in or out of the rear bumper to lift and lower each side of the trunk lid. This is a simple adjustment but I've seen in one or 2 occasions where this needs to be done along with the Light adjustment. If it's too far off and you can't get it aligned with the next step may help. - The trunk latch can be accessed by removing the carpet blocking it. Then loosen the bolts holding it in place and adjust evenly up or down depending on your needs. From there you can then try adjusting the bumpers and/or lights again to even it out if needed. - In the case where the trunk does not align with the fender and the sides are uneven (not the lights) the hinges need to be adjusted. I have not done this yet and after replacing my hood and aligning that perfectly this is a more advanced task and may require the dealer's help unless you are the adventurous type like me and don't mind messing with it for a few hours. Hope that helps

I can't figure out how to add a GPC trunk pull to my cart? Am I missing something?

@WorkPlayDrive

6 жыл бұрын

Looks like he's having website issues. maybe try again on Tuesday after the holiday weekend.

Where would you suggest I look to get some custom decals made up???

@WorkPlayDrive

6 жыл бұрын

My friends over at luxe just started selling these tail light centers in Kit form bit.ly/2nYi2FP, If you want a custom inlay just email them custom@luxeautoconcepts.net

Hey bro...i have 2016 sxt plus.what would u recommend me for the exhaust...i just want litle deep tone.. can u plz suggest me anything... i knw it cant be compare to v8... but somthing closer to v8..deep sound

@WorkPlayDrive

7 жыл бұрын

Exhaust tone is a very personal choice, so what sounds awesome to me may not sound good to you. Your best bet for advice is to join a challenger group, these discussions happen weekly and I know for a fact they can sound really nice if done' correctly. Usually with the exhaust you go with an intake as well You can go as simple as a resonator delete kzread.info/dash/bejne/ZH1lsbx-cbenkrw.html or leave the resonators and do a mid muffler delete kzread.info/dash/bejne/oJZ2k6uqd6eTYZs.html as you can see both offer different sounds If you decide to go with a replacement exhaust system you will need to do some browsing to find the tone you want. while it's always best to listen to these sounds in person before buying you can at least narrow down the tone you want by watching various videos in different setups people put on KZread. In addition to the brand and type of exhaust added Pay very close attention to the following items once you find the sound that you like Pipe diameter Cold air Intake added? what parts of the original exhaust remain (Mid Mufflers, Cats, Resonators) Hope this helped.

@FrozeHybrid

7 жыл бұрын

Jaimany Singh Magnaflow part #19217

Hey! So, I'm a little confused as to how you de-scratched the black portion after you debadged. I'm in the market for the larger Challenger Script Emblem, so I'm going to debadge once I find one at the right price, but I want to be able to get all the nasty swirl patterns and scratches off the black after I debadge. I noticed you linked clay for the Vinyl process, but it looked like you used a solution or something after you debadged. Was that just soap or something else? Cause I'm not looking to cover mine over as you did, I just wanna clean it up before I put the script emblem on it. Thanks! Love the content and the finished product, though! Looks great! I like that it turned out subtle!

@WorkPlayDrive

4 жыл бұрын

The scratches can be polished out with a plastic polish or a very fine grit polish and a mini rotary polisher. The sad part is it only lasts a few months before it's all covered in swirls again. I finally gave up and put the vinyl to cover the area. luxe makes a 3 layer decal with the challenger script just in case you're interested. bit.ly/Luxe3layer

We’re can I get a truck pull at that link doesn’t work

@WorkPlayDrive

2 жыл бұрын

Not sure if they still offer this product

It doesent matter what anyone thinks. I think it looks good. But if u like or dislike it’s totally up to u.

Looks GREAT!!!but.... Patients of an Elephant! AWESOME JOB!!!

@WorkPlayDrive

7 жыл бұрын

lol Thank you!

Its ur car. I think it looks great. But if u dont like or like it its totally up to you

Hey bud great install oh n fyi try putting 2 W.P.D DECALS ON TOP.of each other before black wrap will.make it more pronounced just a thought

@WorkPlayDrive

5 жыл бұрын

Thank you 🙏 not a bad idea 💡

Dude Sick!

@WorkPlayDrive

7 жыл бұрын

Thank you!

did a nice job....but i prefer the gloss

Should of closed the trunk, and back up the cam for an overall finished view..? It does match the spoiler & Scat stripe.

@WorkPlayDrive

6 жыл бұрын

Look at 13:09 for photos. The 3M 1080 M12 vinyl does not match the scat pack stripe exactly. the difference is totally unnoticeable when applied to that are of the trunk.

Glad I watched the entire video before commenting. Looks really good. How do you feel about the rear diffuser? That should be your next project.

@WorkPlayDrive

7 жыл бұрын

I was looking for the initial reactions too :) when I put on the first layer I was like "hell no" too bright. I am really eyeing the diffuser, I want to check it out a little more and make sure it's not going to cause an issue. I already have to back into my driveway due to the incline... It'll be a while I'm working on something pretty big and learning how to do it is eating up most of my free time.

@srsig0

7 жыл бұрын

Work Play Drive Oh the suspense. Can't wait to see what you got next for us. Keep up the great videos.

@WorkPlayDrive

7 жыл бұрын

I'll be sneaking out a teaser soon.

Looks like a nice logo to me

@WorkPlayDrive

2 жыл бұрын

Thank you 🙏

could you do this without the under logo, and put the letters back on?

@WorkPlayDrive

7 жыл бұрын

Yes just do a good post heat and give the vinyl 48 hours to set before adding the letters back. If you use the 3m 1080 M12 Matte Black you can clean it with 70% Isopropyl alcohol without damaging the film before sticking down the letters. You will need to clean off the letters and use a good automotive trim adhesive and hand cut to size.

Would you be able to sell a kit to do this?

@WorkPlayDrive

7 жыл бұрын

I wish, but the application is actually easier to do with a sheet of vinyl cut to size with Knifeless tape. I'm working with Luxe Auto Concepts to try and bundle the supplies together. Until then all the items are in the description.

What exact size did you get the vinyl wrap in?

@WorkPlayDrive

6 жыл бұрын

I purchased a large roll a 2 foot x 2 foot piece would give you enough to do it twice.

@Moour3331

6 жыл бұрын

Work Play Drive thanks!!✊🏽

Is that decal not centered? OCD kicking in

@WorkPlayDrive

5 жыл бұрын

nope it's off by about 1/8"