You are a legend. I’m a young dreaming-to-be pilot and right now I’m learning more and more every day about flying and this video is gonna help so much. Next I’m on to your video about cold and dark starts.

@mattybro88

4 жыл бұрын

Wish I did when I was younger! Good luck!

Thank you. This was amazing! I have felt to overwhelmed to even consider trying to get my head around this, and yet in one evening I learned to use Navigraph and SimBrief to plan flights and how to program and use the FMC and AP! Brilliant. You are a legend!

I've done my first cold and dark start, FMC setup, to autopilot takeoff in one day thanks to your videos, keep up the good work.

i've watched this video 2 times already. Best video explaining the FMC and Autopilot.

@MicahMesser

5 жыл бұрын

Thank you!

THE BEST ZIBO FMC TUTORIAL EVER!! Love it!! 😀

You know you've done a good job when you did better than the actual manual put out by x-plane. So many things they missed. You hit everything. Very well done and put together. A video to study. I thought the autopilot was broke and janky until I watched this and realized it was my lack of understanding. The n1 calculations are a big deal, and what most people miss or gloss over.

I completed my first full flight without any issues because of this video! Tysm👍

This has been the most helpful tutorial I have found and I appreciate you for making this :)

Thank you Micah! In depth, very professional but easy to understand. :)

Absolutely the best video I have seen to fly the Zibo 737-800! Clear explanations and I now understand how to do an approach using the FMS. Thanks for the excellent video!

@MicahMesser

Жыл бұрын

Fantastic! Thanks for the comment and I am glad you learned from the video!

I didn’t see this video when it got uploaded but I love it!

Best video which is explaining the FMC and Autopilot ı've ever seen

This is what I needed, I've learnt a great deal from this. The zero Alt for example. I needed to understand the AP and FMC links too. Good laid back presentation, oddly relaxing. Thanks.

@MicahMesser

2 жыл бұрын

Glad it helped!

Thank you. This is the only video that actually made me understand. I hope you are well, still flying! 😀 ✈️

How good is this Tutorial ....I am watching this video and following on my sim at the same time. I am also grabbing the tutorial video screen trying to look around the cockpit ....duhhh.... Great tut help a lot... many thanks, and keep up the good work

Thanks Micah, I did my first full flight today in X-Plane 11. Vancouver to Seattle.

Thanks! Nice, clear explanation. I've never used an FMC in real life, so it is actually kind of confusing. The GA avionics like the G1000 seem more intuitive to me, but the more I see, the more it does make sense.

@MicahMesser

5 жыл бұрын

Glad it helped!

I totally agree with first learning how to fly departures and approaches by hand-flying!!! Paramount that pilots understand characteristics of the airplane before hands-off. It is when computers and automation fail is when so man pilots become overwhelmed to manage hand-flying their plane!

Perfect tutorial, thanks for you time!

Wow thank you so much. You got a new sub!

Good video I learned a lot now I finally know how to use the fmc. I always got unmotivated when I had to program the fmc 😂

@MicahMesser

5 жыл бұрын

Great to hear this helped! Definitely a barebones tutorial but a great starting point, keep learning!

Finally got a 737 up and doing your test route from Vancouver to Seattle right now. For some reason my VNAV isn't working, maybe I didn't put in as detailed a flight plan as I meant to, but right now the flight is going fine. Wanted to thank you for all your help and guidance. I had some difficulty steering the 737 to the runway for takeoff, it's very hard to steer compared to the bizjets. Took some doing. But the takeoff went great, LNAV is working thus far. No warnings or weird stuff so far.

Great vid Micah!

@MicahMesser

3 жыл бұрын

Thank you!

Thanks! I did my first ever full flight and it was so cool! Keep it up!!!!!!

@MicahMesser

3 жыл бұрын

Awesome, congratulations!

Very Instructional. Thanks for your effort. Cheers

Thank you Thank You and Thank You. I was having major issues with descend. Now I know to bring it down to 000.

This is fantastic. Thank you.

thanks a lot!!!!! Great job

Great video. Thanks so much.

Hey man, this is by far the best video i've seen on this topic. Keep up the content. I got one little question. Do you have any idea why theres no little pink diamonds for me?

@MicahMesser

5 жыл бұрын

As long as you have the ILS approach selected in the FMC and the ILS frequency in the nav radio they should appear when in range of the radio beacons.

Brilliant vid. Thanks

excellent explanations

Perfect tutorial, done the first rnav flight at one go..! Just had to hit the ALT INTV because I accidently put lower altitude than the top of climb. Still need a lot of practice on landing.

@MicahMesser

2 жыл бұрын

You can do 10 mile approaches right out of the gate in X-Plane 11. When you choose the airport, select the runway, and then choose special starts.

@ksi9302

2 жыл бұрын

@@MicahMesser Thanks Micha, yes, I've been utilising that feature. still feeling too short to prepare everythung in the given distance though, more practice!

Realmente muy buen video, muchas gracias.

Great video.

@MicahMesser

2 жыл бұрын

Thanks!

Micah a vast improvement to the video done about a year ago. There are still some procedures that are not by the Boeing book. To verify some correct procedures, watch some Flightdeck2Sim videos he is a real world 737 pilot and a test pilot for Zibo. You can also watch to training videos by Skymatix who has also put out a basic and advanced check list for the Zibo that can be downloaded. He is in communication with Twkster daily from the Zibo team. A good video to help start off with.

@MicahMesser

5 жыл бұрын

This wasn't designed to be an in-depth start to finish checklist, by the book tutorial. This was designed to get new simmers up into the cockpit and flying the 737 with autopilot. I am well aware there are a lot more steps to REALLY fly the aircraft! 😂

Also excellent!

Very helpfull lessons, tnx

@MicahMesser

Жыл бұрын

You're welcome. Be sure to check out my latest versions of these tutorials!

Great video. Have you uploaded ILS approach with 737-800 Zibo Mod?

EXCELLENT !!!!!

19:58 when use autopilot. put it on :)))) click cmd before lnav

I will watch when i have time thanks very much for your informations

Micah I believe putting in a coroute checks off a lot of things. I use the regular 737 getting ready to use the ZIBO.

Hi and thank you for the tutorials, however, I am still having difficulties in completing my first flight with the autopilot. Although, I believe that I have properly configured the FMC there are still aspect that seem to be missing. AS for the FMC my V1, VR and V2 are quite lower than yours and I have noticed that with ZIBO the tablet displays lower fuel than simbrief Bock Fuel and the PAX also is lower. I have tried to add fuel but given that I initially set up my flight to start with engines the fuel truck cannot refuel until such time as I close down my engines. Therefore my speeds are as follows 112, 113 and 129. Nevertheless I have been able to push engines to 40% before take off and applying the N1 button as per video. but once above 1000 feet when I apply the VNAV and ultimately LNAV and CMD. Either I start to loose speed and crash or the letter A start flashing in the IAS/MACH and I loose VNAV. To conclude not the best times on my end and after reviewing this video multiple times and ultimately having the same outcome Einstein's theory of insanity is starting to kick in (Repeating the same thing over and over in the hopes of a different result) . Well I must confess that my drinking has sky rocketed lol lol lol lol lol lol. Would appreciate any help you can provide in making my flight experience less huuummm frustrating :) Cheers

Hello, I love your videos, and I have managed to fly to a few places with them but I'm struggling to use Simbrief as my xp11 nav data is out of date. I don't want to pay for an annual subscription to Navigraph, so how do you buy only one nav data (1903)? Thank you! I also would just like to thank you for your amazing, easy to understand tutorials, they have really helped me enjoy flying in the sim :)

is there anyway you could make a video on how to set up the navigraph that you talked about

If you go off course and by the time you recover you are already past ROESH, how would you make a later waypoint in the flight plan the “next” waypoint for the aircraft to navigate to so that you don’t have to backtrack? In ForeFlight and Garmin Avionics, there is an activate leg function where you can pick any leg and make it the active leg and then just take up an intercept heading.

Hi and thank you for making such great and helpful videos. I have a problem using the ZIBO mod : the ATIS voice and message doesnt stop coming back. Even if I change comm frequency or even shut down the sound. Do you have any idea ? Thank you

@MicahMesser

5 жыл бұрын

Make sure all radios are switched to another frequency. Turn off plane atc voice and text.

@Procuste34iOSh

5 жыл бұрын

@@MicahMesser Thank you I forgot to switch on frequency :/ My bad thank you very much

Hello Micah. Thank you for your video. Is it possible to set route to the alternate destination while on the ground? Can't find this information on the internet. I mean both in zibo and in real life. Will appreciate if somebody else answers too.

I tried moving up the waypoint in the legs section and it still says route discontinuity. Same for the vector.

Thanks for this tutorial. I have a question regarding the flight cruise altitude. May I know where did you get the 19000?

@MicahMesser

4 жыл бұрын

It's been so long ago, I am not sure. Generally - I pull my cruise from my flight brief I get from SimBrief.com

Great video, very informative. Can one add altitude & speed restrictions at certain way points along route that autopilot will adjust speeds & altitude with no manual inputs after its already in FMC correctly after takeoff? Or do you still need to keep adjusting Altitude knob along entire route at each way point for Boeing aircraft's etc.

@MicahMesser

2 жыл бұрын

If you place restrictions and the aircraft is on VNAV and LNAV, it will adjust. Just keep in mind, that the altitude knob, if going up, will have to be higher than the desired altitude. If going down, it will have to be lower.

@Mikinct

2 жыл бұрын

@@MicahMesser very cool- Good to know Much appreciated

HI I am a Learner on x plane 11 so I am asking you not, telling you. should you not have the stab trim set up in take off. I always have trouble with this setting the figures on the wheel. another question how do you have all this scenery in x plane. I am having to buy it. and even then I get messages files such and such missing. thanks for the fligh it was great. chas uk

Also, in the Zibo, can you set the post-cruise master alt. for landing minimums, or IAF approach fix alt., or does it absolutely have to be 0000 for the TOD to work right? (You explained it: after you turn AP off before threshold, then you set missed-approach alt. for a go-around, gotcha)

Thanks for this video and all yr additional tips, very helpful. I know there are many other videos but this one was clear and tailored to what I needed. Thanks again, appreciated.-

Hi Micah, great videos. When I start to program the FMC, pressing Acars & then Atis Req, I then enter the airport press send and wait a couple of seconds, after this I press Atis but I get a message 'no metar data'. Have I done something wrong? Any ideas please?

FMC or CDU display text so small and dark that nearly unreadable, despite full screen view.

When I got to TOD the FMC did not start the decent. VNAV was active, and Altitude was set to 000. LNAV working fine. What did I miss?

Thanks so much. Would like to know how you set that cockpit view. In mine as I zoom back the seats block the view.

@MicahMesser

5 жыл бұрын

XCamera - it's a plugin

Hey Micah, when you went manual on the final, were you controlling your speed too with the throttles or are they still being controlled automatically?

@MicahMesser

5 жыл бұрын

The aircraft was still controlling the airspeed. You will notice the aircraft automatically disengaged the autothrottle when it touched down.

I have this strange issue... While descending, I change the speed in the FMC in legs, but the aircraft won't follow it. It only follows the one that is written in the descend category and I wonder why

For me in the POS INIT it says not in data base when i type in my ref airport which is essa. I am new to this kind off stuf

where did you get the flight plan that you put in the fmc? great tutorial btw it was very easy to understand

@tylerhess6165

3 жыл бұрын

Simbrief

@dasf3251

3 жыл бұрын

@@tylerhess6165 ye i already got my answer somewhere else but thank you :)

Hi. Great video, but I'm confused at exactly what you are doing at the 36.00 mark. You make a change to the V1 or VR? Is that right? If so, why? I'm very new to this :-)

@fminns

4 жыл бұрын

I think you answered it near the end actually:-)

Hi... nice tutorial. You said about putting 0 on altitude before TOD but also the cruise altitude must be set before starting the AP? Or de FMC stops at the inserted in FL one? And if I put higher...does the FMC limit it to the cruising altitude programmed in it? Thanks.

@MicahMesser

Жыл бұрын

Before you activate the autopilot, you should have your cruising altitude set in the FMC and on the MCP. The MCP is like a limiter, it will not allow your aircraft to continue to climb or descend if the MCP altitude is below or above respectively. On descent, you want to set your MCP Altitude to the IAF (initial approach fix) on the approach, if there is no ATC. If there is ATC, they will either give you a descend to XXXX altitude OR descend via the ABCD arrival. If it is descend via the arrival, you will set the MCP altitude to the IAF.

What software do you use to get that flight plan on the left? (and how)

22:19 turning knob not do anything. you also need tell it. do it now. change heading not do anything before yell do it now. same goes speed. you need tell do it now. you can dial knobs before do it. lol you dont have altitude hold so fmc descent. unless safety reason. if you not know it you drop like rock when fuel end lol

Would like to see a ILS approach with the Zibo mod thanks

@MicahMesser

5 жыл бұрын

Sure thing. I'll add it to the list!

@thiscorrosion900

5 жыл бұрын

Don't you just add the ILS approach into the FMS for arrival (STARS), and the transition, etc., and let the FMS bring you into the final approach, and then just arm an ILS APR as usual?

@MicahMesser

5 жыл бұрын

@@thiscorrosion900 Pretty much.

Is there a way to use the computer keyboard to input info as in X Plane default 737?

Hi - I used Sim Brief to get a flight plan from Toronto Pearson (CYYZ) to Sault Ste Marie (CYAM) and got the following route; CYYZ/15L DCT NUGOP DCT 4519N08153W CYAM/22. HOW do you program in 4519N08153W (which I am assuming is a set of lat and long)?

why does my zibo mod 737 have a flight config warning and my plane wont move without a noise of this warning

Can't set V speeds. I hear the knob clicking as I turn it but no speed bugs appear or move. HSI says No vspd.

How do you put the airplane into cold and dark? The plane is always in turnaround state.

Hello,i have this problem when i takeoff and fly manually for a bit my autopilot just wont turn on any ideas why??

I press the n1 limit page on the fmc and i cant get the toga power. Right here 7:24

pressing N1 during takeoff is not the same as TOGA. Good starter tutorial but there are a few mistakes

when you are at 47:38 in the video you say you are setting 5 flaps at 139 but you don't zoom in so I can't tell what you are doing. I can't tell if you are doing something on the keyboard or physically adjusting the flaps and when you say set it looks like you click something but again I can't tell cause you never zoom in. I'm sure you can see the knobs clearly in you're cockpit but not so much in the video. Great video, just wish you would zoom in more and maybe use a larger mouse pointer

@user-wd1tp7gt9r

4 жыл бұрын

I totally agree with this

When you enter your speed references I see you turning the knobs but where do you see the speed?

@MicahMesser

5 жыл бұрын

On the main display. Look to the lower left corner of the screen and you can see them moving. Note: You don't have to manually selected your V1, VR, and V2 speeds. But, VREF is manually entered in most cases.

@Hoekstes

4 жыл бұрын

Just select the flap setting twice on the REF page, then you don't need to enter it manually.

How does auto-throttle know what speed to go whilst decending and ascending

@playfs4644

4 жыл бұрын

MK Playz idk I was wondering that aswell

OK so just followed step by step again. Everything going well, Turned altitude to 0 before cruising Alt as you say. But now my aircraft won't begin descending according to fmc leg page. All points are filled correctly but it's staying at cruise altitude

@MicahMesser

5 жыл бұрын

Sounds like it's not functioning properly. I'd recommend reinstalling just in case and then trying again. It's possible it's a bad install.

Hey need some help. Everything is up to par but v speeds don't calculate. Any ideas?

I noticed that the auto throttle switches are in UP positions correctly but the A/T push knob isn't lit up. Do you not need to push that on? what does that button do anyways?

@MicahMesser

2 жыл бұрын

If the A/T switches are up, A/T is armed and will automatically activate if VNAV, V/S, or SPD mode is activated.

why do i not have the vrefs? ps i am very new to these type of things

Why do the papi lights say you are too high if you are on the approach

How do you automatically switch your view to the different panels? Is this a setting in xp11?

@TuccOPx

4 жыл бұрын

Move your camera inside the cockpit to where you want it, press control and a num pad key (0-9) at the same time to save the location. Pressing the num pad button will go to that saved location. Hope this helps :)

what do you use for your flight plan?

Thanks for flying from my city CYVR I will never set altitude settings to 0 simply what you will do if vnav stop working, in my opinion you should set altitude to IF point

@MicahMesser

5 жыл бұрын

You can do that. Setting it to the IF point works for most situations. I have run across a few times where the aircraft glitched out and didn't descend beyond it, which is why I set it to 0.

What tells you you've got a RNav route from Simbrief?

Please help when i choose departure and arrivals i doesnt show up on the rte page

@MicahMesser

5 жыл бұрын

It won't. Look on the legs page.

Can anyone help? I have been trying to get zibo 737x to work in xplane11 for months and different problems and bugs keep coming up making xplane impossible to use. I cannot afford £80 for a payware aircraft and zibo seems to be the only solution. At the start of playing plane 11 (mid 2019) it worked perfectly but I didn’t no how to fly I nearly had the hang of the zibo 737 when bugs came up making it unusable. I have reinstalled several times on steam and even reset windows 10 but no luck. I am running out of options!

What was the name of the flight plan u use

Hmm, did you disable N1 between cuts (before 21:08)? I'm flying the same route with your flight plan, and copying your actions. A while after reaching 19000 ft (actually it levelled off at 18600, perhaps because I set altitude 0 before the climb finished?) I got a warning because I'm now at 355 knots. I disable N1, but then the plane did a rollercoaster maneuver twice before levelling off at 18160 ft and 279 knots.

@MicahMesser

5 жыл бұрын

Make sure VNAV is activated, that should control your speed and rate of ascent. I didn't disable anything on climb.

Anyone know why ''cmd'' wont activate when I am flying the line and having the fmc fully programmed?

@zach2047

4 жыл бұрын

BlindAsABat_ same thing happening to me. I fully programmed the fmc and I have speeds and alts. The flight path shows up on the radar and on the flight director but I still cannot engage cmd. Not sure what’s up with this.

@jameswest9119

4 жыл бұрын

@@zach2047 Have you had any luck solving the problem?

@zach2047

4 жыл бұрын

BlindAsABat_ unfortunately I haven’t been home to try to fix it. Will let you know if I have any luck

@imanishraf6215

4 жыл бұрын

Same here, once it takeoff from the ground and reach a certain altitude I try to turn on the cmd but doesn't work.

@constantinefragkos4265

4 жыл бұрын

@@imanishraf6215 You have to steady your steering. Make sure everything is stable, yaw pitch etc

can someone explain why it doesn't let me to enter the airport?

So I really need you help. I’m trying to get my zibo mod to work but every time it loads it in there is an insane amount of lag and then my games crashes. I downloaded the exact way you did it and turned down all of my graphics and rendering. I really want to use it but it just lags out all the time. Do you think you know what the problem is?

@MicahMesser

4 жыл бұрын

No idea. Try using a different update version.

Do you know how to know if I’m on reserve fuel

So I have a problem. My fms doesnt do what I told it too. It climbs at only like 1500fpm and the speed never gets to cruise. What am I doing wrong?

@MicahMesser

3 жыл бұрын

Could be a lot of problems. Come into my discord and drop some images of what your PFD, MFD, ND, and FMC look like.

Isn't it crucial to also set the overhead panel Cruise Altitude and landing alt. etc. for the pressurization system? I mean, should these be set before taxi? I didn't the one time I tried the Zibo, and got a pressurization cabin warning, although I did set these and try to fix it, and it didn't fix it. But I also may not have filled in all info in the FMC thoroughly, I admit.

@Hoekstes

4 жыл бұрын

Scott Briggs remember to turn on the engine bleeds and the packs - otherwise it won't pressurise. Edit: ... and check the pressurisation guage.

@anthonybruce3482

2 жыл бұрын

How do you do this? I had same problem

@anthonybruce3482

2 жыл бұрын

@@Hoekstes how? I had the same problem. Thanks

@thiscorrosion900

2 жыл бұрын

@@anthonybruce3482 I'm not even simming anymore because Microsoft 2020 wasn't working at all for me, and I gave up on XPlane11 too since it was not great. Anyway, I found later you have to set the overhead pressurization etc. and fill in everything in the FMC before even taxing out to the runway, that's crucial or you'll have problems right away in a flight on the Zibo 737 or many other planes.

Is this the RNAV approach?

I wish you would've zoomed in further to see the fmc better. It was blurry and far away.