Great video man i wouldnt have done the turbo tho the reman turbos from ford fail a lot.

Very cool video! Enjoyed. 👍👍👍

@farley4633

8 ай бұрын

Thank you! Much appreciated!

I did my turbo a year ago. I pulled the water manifold out, and the turbo came right out and back in. Absolutely no struggling. Just a thought.

@farley4633

7 ай бұрын

I'll have to try this if I ever get the opportunity to do it again! Thanks!

Was the coolant drained low enough before popping the turbo off?

What was the charge for this job?

Any way to get in contact with you have some question on another on if your projects

So was the sound the Turbo or the manifold leak? Mine has the same sound just not as bad. It just started

@farley4633

5 ай бұрын

It was definitely the manifold leaking. The turbo was probably fine to leave in but I know those early ones had alot of problems and didn't want to have to go back in there twice. We just did it for the peace of mind

Did you ever determine if it was the turbo or the exhaust manifolds really making the noise? I’m pretty sure mine started this noise yesterday…..FANTASTIC 😢 Also what did this end out costing the customer, ball park?

@farley4633

10 ай бұрын

Customer sourced the parts himself. I just provided the labor. If I remember correctly I think I charged right around 1200 bucks to do the job. The noise was definitely from the broken manifold bolts. We did a turbo for peace of mind

@wtbman

7 ай бұрын

I had the manifold issue on my 2013 and made the mistake of upgrading to the new turbo (2015+). Don’t do what I did unless you are deleted because you’ll never get the tuning right and it turns into an emissions nightmare.

@kbdesignz5808

6 ай бұрын

How long did it take you? I did mine over last winter and the turbo was 1700$

What is the torque spec on the exhaust manifolds???

@farley4633

10 ай бұрын

I cant remember off the top of my head. Might've been 18 or 23 foot pounds but please don't take my word for it

That sounded like a manifold leak . Known thing on the 6.7

@farley4633

10 ай бұрын

It was. There was two broken studs on the drivers side rear of the manifold

I have a 2016 6.7 F350 Powerstroke Diesel, 152 k miles. Has a tap or knock. Are you interested in diagnosis & repair? Where are you? Thanks, Ben

@adamdeutchman138

4 ай бұрын

I have a 2011, knocking like mf

Nnnn no problem . It will be 1,200 sr. I'll take no check. Cash or credit card.

@farley4633

10 ай бұрын

Exactly 😂 lol

Don’t use power tools and your better off on breaking stuff and somehow pb blaster don’t do 💩

Thanks for the video/ tips n tricks. Not looking forward to this bs.. fml

@farley4633

11 ай бұрын

No problem! Glad you found it useful! The job itself isn't that hard, its just time consuming. Trickiest thing in my opinion was getting that drivers side up pipe clamp popped off. A long air hammer bit would go a long way. Once I got that sucker popped off it went pretty smooth

@macintyreful

11 ай бұрын

I'm currently at 152k on my 11 6.7 and know that this is inevitable, what does a job like this cost with parts?

@farley4633

11 ай бұрын

@@macintyreful customer supplied his own parts on this job, so I'm not exactly sure, but I've heard great things about the BD Diesel manifold kit. Supposedly comes with everything you need to get this job done other than the turbo and up pipes

@natgasf7236

10 ай бұрын

Location?

@farley4633

10 ай бұрын

@@natgasf7236 I live in Michigan