All I gotta say is I don’t know how it’s 2023 an this the best we got

@cashway0420

3 ай бұрын

I saw some electric ones at Home Depot but they were over a hundred bucks each

@kskstudios

3 ай бұрын

Agreed! I grabbed this link for a female friend and watching it realized I'd been loading them wrong (putting peanut butter over the whole yellow plate) and just thought that the catches were more difficult to set than the older metal bait models... I had no idea there was a sensitivity setting. Still worked though!

@AZ-ct9th

2 ай бұрын

Well it works. Soo..

@ralph7077

2 ай бұрын

If it works, it works.

@joseelgallovelasquez7932

24 күн бұрын

Because still effective!!!!

Its a sign of the times i had to watch a KZread video as i couldn't get the traps to set from the instructions on the back. Im 61 and am so thankful for KZread! 😊😊

These traps are great. Caught the sucker literally within 25 minutes..peeked out and walked right onto the trap...

@Unknownnoonmyth

2 жыл бұрын

Same but with in an hour

These are more difficult to setup than the old style metal trap, however the mouse does not even get to the sampling phase before the trap closes in after the mouse puts any weight on the yellow paddle, much better design. Thriller to setup.

I appreciate the advantage of not leaving your scent on the trap, but isn't our scent all over the food they eat and spoil?

@MdAjijul-cc7zg

8 ай бұрын

Àamyxl

@jasonginzburg4612

7 ай бұрын

Use gloves

@syedshahnoor

7 ай бұрын

​@@MdAjijul-cc7zgwhat?

I was with the 95% of commenters who thought these things were impossible to set and use until I actually WATCHED the video. The presenter doesn't say it (and should) ... when you hook the metal wire under the yellow pad you have to LIFT UP ON THE YELLOW PAD. If you do this, it connects perfectly without accidentally snapping shut. I was leaving the yellow pad flat and of course the metal wire was not long enough to connect. Set 6 of these and within a night caught 3 mice using all I had in the house ... Laughing Cow cheese spread ... which probably has no protein and very little scent but apparently attracts mice! Try again ... these do work.

@MST3Killa

5 жыл бұрын

@@adastra6747 Absolutely didn't work. the yellow is too smooth for the stupid hook to latch into I can bend the damn plastic all the way back and finagle it a hundred times but the damn things won't stay at all no matter what.

@echt114

3 жыл бұрын

Yes, that absolutely does NOT help. I was doing that anyway. No matter where you place the end of the bar it does not hold, just snaps back. Obviously the plastic is angled so that it does work for a few people, so the manufacturing of it must be highly inconsistent.

@victorkamara9226

2 жыл бұрын

Respect 4 this, the trap is finally firm 👊🏾👊🏾

@humanyoda

7 күн бұрын

@@echt114 The trap works very well for me. I've caught probably about 20 mice with it.

This is probably one of the most reliable traps I have ever used. Had a serious mouse problem in my shed and garage and these traps are putting in work.

@patstaysuckafreeboss8006

Жыл бұрын

A single cat will exterminate these fuckers also.

I about started crying because I watched four tutorials and still couldn't set it, so I thought I was just stupid. Thanks to the people who commented. I had to use pliers to bend the bar

I've caught a few mice with these traps. I was sitting at my pc, earphones on, having a whiskey (as you do), when I heard loud SNAP, looked over where I set it, and the trap was upside-down, with these little legs scrabbling the air. Sooo satisfying! It was a lesson it only learned once, tho, 'cos that little sucker was pretty much decapitated when I threw it away. Oh, and peanut butter? Secret weapon. Learned it from Wanted movie :)

@jodieleschander1860

Жыл бұрын

See i knew there was sometjing wrong i forgot the whiskey .

@jingo500

Жыл бұрын

@@jodieleschander1860 Lol. First things first: put down the whiskey. THEN set the traps with dollops of smooth peanut butter, put them in a known travel location, and set up a motion-detector video camera to catch the little wretch in it's death throes. And now I fell slightly sad that Slippery Jim the Shoe didn't get back to the family that night. Luckily, his missus shared the youngest with the rest of them...(mouse humour. Read) ;) And don't forget to lift a glass to the fallen, even if you made them so ;)

Nice editing. Didn’t actually see how easy it was to set... because these kind are a pain compared to traditional

@CiscoWes

Жыл бұрын

Bought a pack of four of these. Could set three of 'em but one of 'em would not set, it would trip before I could put it down. It went right into the bin.

@J_c130

7 ай бұрын

Agreed. Just did the same thing tonight. Absolute junk.

Thanks for the instruction. I always used way too much bait over most of the yellow platform instead of the little hole, which may make these traps even better. I always set them on sensitve and put them down very gently with my fingers out of the way. These are the most effective sensitive traps I have ever used and I recommend them for simple reliable effectiveness.

@jonmyers8046

Жыл бұрын

Ditto

The comments are amusing. I was almost persuaded away from trying these, but at $5 for a four pack I had little to lose. It took 10 seconds to figure out you need to tip the bait trigger up (simply tilt the entire trap back, no need to risk your fingers) for the bar to reach where it needs to. They work well. I caught two mice first night I put them out. Easy peasy.

Agreed. I have set dozens of mouse traps and the fake yellow cheese ones work about one out of three new ones. How difficult can it be to get this right so they can be set 100% of the time like the older ones with brass bait holder? Geez.

Thank you so much for these clear and simple instructions - I was really struggling LOL. After watching my traps were easily set and are baited and ready to go. I did not realize there was a sensitive side and a firm side so the trap was springing just by setting it down.

These traps are amazing. Worth every penny and peanut butter does the trick.

For anyone having trouble setting these, this was the solution for me. Hold the arm bar straight to where the bend at the end of the arm bar is pointing down. (like shown @0:36 of this video, but do not place under the yellow pedal yet). Then using your fingers, push down on the middle of the arm bar a bit to where you create just a very slight bend. Once you do that, then follow the steps as shown into this video, using the left side as shown @0:40. You'll still have to finagle with the pedal and bar a little bit, but you should then be able to get the bar to where it will stay put under the pedal as you let pressure off of the kill bar, and the pedal will stay elevated as well. Trap set. Used this method and had success. Mouse dead by the following morning.

@gwynmoth3940

Жыл бұрын

Thanks hero worked the charm :)

@perfectlyimperfect45

Жыл бұрын

Thank you so much! This is the only thing that got it to work!

@lisavoyce6775

Жыл бұрын

You need to post a video of this.

@RyanNJ

Жыл бұрын

Thank you couldn’t get it before that tip!

@gaileiffert6717

Жыл бұрын

Thank you so much!!

LMAO! I've finally got it set, thanks for the upload...but I don't think it matters if it has your "scent" shit the 2 mice I've been trying to get are not afraid of me at all! They run right across the MIDDLE of my floors as if to say haha catch me if you can! lololol

@brebrey124ni

5 жыл бұрын

So you have Stuart the mouse and his apprentice. Ever get them

@Unknown90010

3 жыл бұрын

Yea so fivel has gone west and landed in your house too same here i can't catch the damn thing for nothing actually saw mine go around my tomcat spin trap one and I immediately picked it up and put two of these down to catch mine

@suzanner2454

2 жыл бұрын

I had one dance a jig on my counter while I watched....horrified

Only I can never get the bar to stay under the yellow without it snapping on me.

@actinganimal885

6 жыл бұрын

Frank Sulka me too

@sexypoetry

6 жыл бұрын

life's what you make it...you subconsciously want it snapping on you, that's what you bought it for, and you also hope that mouse will bite you some day

@predeem1629

5 жыл бұрын

@@sexypoetry lol

@sexypoetry

5 жыл бұрын

P redeem ..... t's true...in one of my previous lives i was an alpinist cause i subconsciously wanted to be eaten by the bear...i've done past life regression to find that out...couldn't remember if the wish was fulfilled, though

@fergal2424

4 жыл бұрын

Morons.

At 0:28 it says "so your scent is not transferred to the trap" - surely setting this trap as shown, with bare hands, will transfer your scent. Better to wear gloves? (that may also make the trap snapping shut on your fingers less painful during attempts to set it).

@110380michael

5 жыл бұрын

These traps failed me until I put on rubber gloves and set new ones. The scent made a difference for me.

@polarlab113

2 жыл бұрын

What was that old saying........build a better mouse trap and the world will beat a path to your door?well somebody better start because these things are junk I just brought home a box full and half of them don’t stay set they trip as soon as I put them down way to sensitive.it’s random some are good some are bad

@cookmikew

2 жыл бұрын

@@polarlab113 no Trent, you just need a still hand.

@polarlab113

2 жыл бұрын

@@cookmikew I emailed the company and they sent me replacements free. They are the metal pedal type and they told me they work better and they were right the fault is in the design and manufacture if the plastic pedals

1. Bait it. 2. Right hand - use pliers to hold down the trap. 3. Left hand - move arm into place. 4. Rest on edge of counter or something. 5. Left hand - slide knife or something under yellow part, wedging it up until it catches the arm. 6. Keep the knife wedged under the yellow thing. 7. Slowly release pliers. 9. Grab the corner of the trap with the pliers (wooden part only) and place on the floor.

@fumblebird

5 ай бұрын

Thank you, this was helpful.

I had to tip up the yellow pad a little bit more than what it showed on the video otherwise it's almost impossible to get the bar to lock underneath

Thanks! I was lucky enough to set up one trap but I wanted to set another one and almost lost a finger, but I will always note to keep my fingers away from the kill plate area

It worked very well for me. I use a knife to put peanut butter in the gap on the yellow plastic part. I do not use glove because I have less dexterity to manipulate the metal bar and hold the yellow plastic part at the same time. I catched three mouse already. I set the metal bar on the sensitive side of the yellow plastic part (the right side). It is true that it is a little tricky at the beginning, however once I got the hang of it, it works very well. The most important thing to not getting hurt is to avoid putting one’s finger in the trajectory of the kill bar. Once it is set, hold it by the sides of the wooden part walk gently and gently deposit it on the flat surface.

For people who think it’s hard to set, I had the same problem but you just need to tilt the trap back or just lift up the yellow part after the bar is underneath and it sets easily

@levanahdr1991

4 жыл бұрын

That's the big I was struggling with, I put the arm under the metal bit supporting the yellow pedal. I've never had to do this before so..hege

They can't seem to get it right. With the last set I bought, the mice were able to take the bait without the traps going off. As others have noted, this year's batch are impossible to set. The bar will not stay under the yellow pedal; it doesn't matter which side you put it on (left or right). Prepare to get your fingers snapped over and over. On those rare times when the bar stays put, the trap goes off when it is placed on the ground. On those ultra-rare times when it can be put on the ground without snapping, it goes off in a few seconds by itself. The only way I could get the bar to stay put was to take a pliers and bend the end of the bar up slightly. The question now is whether it will go off when a mouse goes for bait. I would also like to note that this video has important details that are nowhere on the packaging. I guess Victor thinks it is better to have incomplete instructions in 5 languages rather than a complete set of instructions in 1 language?

@themotherofharlots4605

7 жыл бұрын

did it ever go off? these things fucking suck lmao

@sheltmasterdime

7 жыл бұрын

Some went off by themselves. In a few cases, the mice were able to take the bait unscathed. A lot of them did work once modified as described above. Forgot to mention that it also helps to rough up the end of the bar a bit with the pliers, to help it stick in the paddle. Nice of Victor to make their customers feel included by allowing them to supply the missing steps in the manufacturing and QA process :-)

@themotherofharlots4605

7 жыл бұрын

i ended up using an old tomcat one, but if that one goes off [since i have 2 mice to deal with] , ill use your plier method, thanks man!!

@jessefisher1809

2 жыл бұрын

I'm having the same problem. The bar literally doesn't even reach the yellow. Wtf

@RyanNJ

Жыл бұрын

Bend the bar the Lift the yellow carefully it works

Thanks. Mom and I couldn't make heads or tails of written instructions, this helped a lot.

I tried many different traps but this is better than all the others thumbs up its the best traps I have ever tried, I bailed with peanut butter with my finger excellent .Jim from Australia

@leoharker734

2 жыл бұрын

Are they reusable or do you throw it out after

@jimk8208

2 жыл бұрын

@@leoharker734 I catch over and over with the same traps no need to clean it only re setting

@jimk8208

2 жыл бұрын

@@leoharker734 they reusable over and over.

@leoharker734

2 жыл бұрын

@@jimk8208 oh ok thanks

I read all the comments and I have already been doing everything that people suggest. Tilt it back, set on firm side and it still won't stay set. I agree, it's junk. Bring back the old style. Someone is always trying to build a better mouse trap.

Thanks, will test out on family members

Instructions unclear, the mouse has trapped my hand and it hurts.

I have had it with inferior manufacturing .I bought a boxful of these and fully half of them will not remain set as soon as I let go of the pedal after setup they trip.ask me how many times my fingers have been hammered.once or twice isn’t bad but 6 or 8 times is frustrating and painful.

Working on it, will update you soon. I can hear some promising noises

I'm beginning to think you almost need 2 people to set this darn thing! One to hold the kill bar and one to manipulate that yellow pedal! I'm tired of getting my fingers snapped so I'm heading to the store tomorrow to see if I can find a package of the old fashioned ones which worked great and were easy to set.

Bring back the classic ones, the classic works well.

@EmmieTuesday

2 жыл бұрын

and cheaper

Except that they suck. What's the point of having a super trap that you can't set? Never had that issue with the old metal bait sets.

@cooljunkproductions

5 жыл бұрын

It's not very hard. Use your right hand to hold the kill bar back bait side facing away from you. Grip the thing like a racket to make sure its not going anywhere. Then bring the support bar into the clip with your left hand. Set the bait using your left hand with a knife while still holding the kill bar with your right hand. Keep your fingers away from the bait side at all costs (obviously). If you're struggling to get the bar set, try angling the trap differently until you can see and feel the bar grab. With your left hand, pinch the end of the trap opposite of the bait from under the kill bar so you're only holding wood (never put your fingers on the bait side!) and carefully release your fingers on your right hand. Now you're free to put it wherever you want.

@RagingKabuto

4 жыл бұрын

@epic youtuber2789 good point, you're 11. Your opinion on literally anything doesn't matter.

Catch mice every time! Just have to take your time setting and keep fingers clear. Gotta love these comments LOL

Okay lemme say this you CANNOT get the bar underneath the yellow tab the kill bar always forces it off and SNAPS right down on your fingers!

You made it so easy and I thank you

There’s no way, the bar that goes to the trap is just short I can’t even attach it without it snapping down

@ps5flexxx

4 жыл бұрын

U hook the long rod on the plastic not on the metal hook

@adigames

3 жыл бұрын

@@ps5flexxx i got it to work. when you have the arm going to the yellow bait area. you gotta lift the yellow up and slowly raise the kill bar. one it stops moving itll be good. its not suppose to be flat but raised slightly

😊thanks I finally figured these out

TIP- While you are pulling the kill bar back. Try to push the back of the arm bar where the loop is all the way to the left and then push the front of the arm bar all the way to the left as well holding both ends of the bar at the same time for the "firm" setting and then lift the yellow plastic up a bit until you feel there's tension between that and the front of the arm bar ...then release it ..keeping your fingers away from harm of the spring. Don't worry if it fails, just try again...You'll get use to the snapping of the trap, just remember to keep your fingers safe. I find this is the easiest way.

@MysteryTheMonochromeWolf

Жыл бұрын

I literally just smashed my thumb while setting one of these up

i have the "pestshield" ones, they look almost identical but there is no "firm" and "sensitive" mark on them....ooops...there is ....letter "f" and letter "s"...now i see it...so....if i place the bar close to "s" i'll catch the mouse easier, right? ...and regarding the toothpick, to avoid the scent of my fingers...i've been touching those traps already a lot, while learning how to set them up....does it mean that i shouldn't bother with toothpick (won't make much difference) or does it mean that i should use the toothpick AND somehow remove my already deposited finger scent from the traps, first of all, and if yes then how?

I caught 4 mice in 2 days using these snap traps, which were invented in the 19th century I believe. You really can't improve much on a good initial design.

Easy. Caught my first mouse in 6 hours!!!

Why does this have a yellow plastic? I bought some and they had a metal piece

Wow interesting 👍! Thanks for sharing 🌷

What I've liked about the black snap traps is how easy they are to open and release the dead mouse. What this doesn't show is how to release once it's snapped? Do you have to use something to pry it up? Does it need to be washed to get rid of dead mouse smell for the next catch?

@OhNo-jq6iz

2 жыл бұрын

For about $1 each, I think they’re meant to be tossed in the trash with mouse. Its unfinished wood, so very porous which means you’re never gonna get the smell out, or the bacteria from whatever blood/pee or decomposing squirts onto it.

@GeorgeCostandi

Жыл бұрын

It's less than a $1 each...

@pegjones7682

7 ай бұрын

I reuse them over again,wear gloves when I remove the corpse. How I wish those black chinese traps actually worked anywhere near as well. We seem to have a plague of mice right now. Two cats and a dog no deterant!

Just seems to depend on the luck of the draw. If you pick up a bad package of these traps they are almost impossible to set up without snapping. Other packages they are a breeze. Can be really frustrating !!!!!

Ole Victors are the best,no need to over complicate things,I always use a little piece of cheese and usually in less than a hour I have my first costumer, bam!!!

I used a spatula to angle the paddle so that it would catch on the arm bar without risking my fingers getting snapped - it's finnicky and sensitive but all four I tried did set.

Really hard to get the Arm bar over the Kill bar, the Arm bar is very Short and it does not stay under the Kill bar - tried several times and couple of close calls :) If anyone has advice on this part, or if there is a Video that shows how to SLOWLY show this Critical part would much appreciate !

I legit caught one within 5 seconds of setting it

Not sure why so many complaints.I just set mine for the first time in my 63 years I have a mouse.I set it with slim Jim meat and went to bed and it snapped his neck within 45 minutes.I heard the snap and looked on the stove and he was dead.Put his dead ass outside.I hated killing him but it was gross having him here.Still searching for the entrance point.Hoping it was just one as that is what the evidence looks like.I fed squirrels and blue jays peanuts in the shell everyday so somehow this guy found a way in the house and ripped open the bag twice to get a peanut.I no longer will feed the squirrels and blue jays.

So she touches every part of the trap with her hands and then says to be careful that your scent is not transferred to the trap??

Trap not working on all angels for small rats ?

I notice they skip the part of releasing the spring part...tha is when the traps often spring and can damage your fingers,is there a trick to this I dont know? Rat traps are even more dangerous to set. Poison is a lot easier BUT i dont use it because it kills raptors...hate even killing mice but.....

Caught 1 yesday . I steel wool my pvt hse i side out .but still get rare mice at times

God, damn it! I didn't know there were different setting in this trap. My mice have been walking away with bait!

Had to bend the tip of the wire up slightly so it would hold. It will work.

Thanks

With the trap I bought, the "F" position for the arm bar is sensitive and the "S" position is firm. Try it yourself without using that scary kill bar. Hook the arm bar under the "S" & "F" sides in turn, applying pressure to the arm bar with a finger under it. Then gently touch the bait platform to determine which settings are firm and sensitive.

Def harder to set than metal trigger but do work,did not know it had a setting

Those are some pretty good mice traps, very effective. Greetings from Veracruz, México.

GARBAGE CAUGHT MY FINGER MORE THAN MICE!!!! BRING BACK THE GOOD ONES!!

@JoshuaXiong

5 жыл бұрын

Ha.

@brebrey124ni

5 жыл бұрын

Omg lol You have to bend the end of the wire up a little and then they set a lot better. I know what you mean though

@cooljunkproductions

5 жыл бұрын

How were you setting the trap? Don't release the kill bar until you can feel it lock in, and don't ever hold it from the bait side or you're just asking for it.

@fergal2424

4 жыл бұрын

Are you slow in the head?

@levanahdr1991

4 жыл бұрын

Me too! With the snaptrap, caught my thumb twice! Ouch

Thanks that helped

Thank you !

Folks used them for years as I have a barn. These ones with the plastic peddle? They are so slick and hard to set. The older version with the metal trigger is much much easier. Take my word.

Had a hell of a time attempting to set these traps without the video...They just kept tripping...I was putting the bait/food onto the entire surface of the yellow plastic...which has holes which appear to be where food should go. They even have a moon shaped hole. What is the sense in that ...much much worse than the old traps which don't have any stupid yellow plastic. Thanks for your help here.

how do i reset it after catching one

Thank you so much! I set the trap . If you do it just like the woman it's easy

I've got two cats and still had to buy bloody traps. Just couldn't figure out how to set them so thanks for the video.

@suzanner2454

2 жыл бұрын

My cat is too retarded to catch a mouse

My first mistake was I kept the bar to the far left making the trap too tight to spring. 2nd, this mouse seems to be smart and pull the cheese off the yellow plastic. Peanut butter hasn't worked for me, as the mouse doesn't touch it.

Man this thing is INCREDIBLY sensitive. I only managed to place 1 on the ground without it triggering. The moment it touches the ground, it triggers. I literally cannot be gentle enough

@brothaonanadventure3573

Ай бұрын

For mine I had success setting it on the floor and using my big toe to hold the kill bar. I used my thumb to lift the cheese until it held, removed my hand, then VERY slowly removed pressure with my big toe. Only issue I've had was I can't move them from where I set them cause they're so sensitive

Mine only goes on super sensitive. Soon as I drop cheese on it, it snaps

Thanks helped out alot it is 2:05 a.m. in the morning and I went to turn the kitchen light on and low and behold I see a little gray rodent loosing his grip running around until he disappeared under my stove and then my wife comes up and says what are you doing oh nothing honey just setting a mouse trap ok well go to bed ok I will love too honey good night 😴 🌃 🌙

Had a professional set these up . There is always a wise guy got P B without tripping it . So now it's me and da rat The sun sinks slowly in the west the amber glare of the sky, the stilness in the air is deafening . (Squeak) AAAGGGHHHHHHH

Bait Cage Kit for rat traps makes these victor rat trap more effective and uses no poison available on amazon

These traps are a serious nuisance to set but now the older version is very difficult to find. Have to come to KZread to learn the hacks to proper setup.

It took a few hours for this to work for me. I recommend.

@paulrisso916

Жыл бұрын

You recommend a simple device like this that took you a few hours for it to work? In that time you could have sat there, waited for the mouse and capped his ass with a pellet gun! These traps are shit!

man this trap works, caught the little mouse in ten minutes

@hopenavajo1391

4 ай бұрын

Been using Victor mouse traps,but couldn't catch a small mouse,also using cheese,but it just takes it out with ease.

Victor plastic paddle mouse traps are easy to return to the store

Sent my dad to get traps, came back with these. The pair were defective and would not stick. The arm wasnt long enough and the lip of the trigger was way to small. Had to make some modifications by bending the trigger closer. After doing that they finally stuck but still werent sticking that great because of the lip being so small. We shouldn't need to do any modifications. If it doesn't go off by accident and catches something, i guess i got what i paid for.

@MST3Killa

5 жыл бұрын

the whole 'sensitive' and 'firm' crap is a joke, if you can get it set and it stays set, it should be okay. Only thing to be mindful of is bending the bar too much making the hook catch too firmly (thus not snapping on the mouse). I hate this design with a passion.

Fried chicken skin. Mice won't even wait until it's safe to come out.

LoL how many comments are as if they only have one mouse! Like _"Yay - caught my first mouse!!"_ etc. These plastic things wear out after a few workings because the plastic where the wire rests against gets rounded. It is a very soft plastic. A metal-to-metal trigger is needed.

I have tried and tried and my Handyman has tried to set these traps, we cannot do it. I have set these traps in the past but perhaps not this time. All I have our snaps fingers!

Accidentally stepped on one…

Just set up the 4 mouse traps after watching this video 😅 i hope it works.. little mickey is stubborn and always visit my home without notice 😅..so lets see if i can caught him 😅.

These traps are so sensitive, the breath from a mouse yawning will set them off.

Okay, at 00:35, her finger is right there - ready to be snapped, if her thumb slips. Don't do that (I found that out the hard way). Better to just hold the trap vertical and the yellow plate/trigger thing will drop forward and you can set it then.

The release wouldn't work. We slammed a pen down onto it multiple times, which is about 100 times harder than the force a mouse would apply. The only thing that got it to snap was my 200 pound brother slamming his foot down on it. Garbage.

Don't waste your money. Bought two, neigher went off. Oh yes, they snapped initially and were very sentetive when I first and carefully put them down and slowly up again a wall in where the mouse was. I guess they only work or snap once. I fed a mouse a whole lot of peanut butter and the trap never went off. Slammed it with the end of a broom handle. Took a few big jabs. Ya, not going to catch a mouse that way.

Mouse trap? More like death trap? What was wrong with the original all metal style that worked for 100 years?

been trying to set one trap for over 3 hours, its impossible

These new fangled mouse traps SUCK!! It's incredible that I had to resort watching a video on how to set it. I figured how to set the original version with a metal tab when I was a child.

I have this and iT's failed five out of six times. iT would have helped if I watched this first. The sensitivity of the setting really matters.

I have to be missing something. “It’s so easy” right? I am not seeing how the metal bar forms any type of latch with the yellow part. I’m bending things every which way and nothing I’m doing is causing the trap to be set. These things are garbage. I’ve had better luck with the “pro catcher” series on Amazon

I like the old variety better but what is everyone complaining about? They really aren't that hard to set

@JamesKing2understandinglife

6 жыл бұрын

The plastic ones have a very desirable more sensitive trigger set.

@charleshoppner4111

5 жыл бұрын

The plastic ones require you to angle the paddle to set it but don't say so in the instructions - they don't arm as easily in general but they're not a total disaster if you know what to do.

Firm/sensitive side? Well, that's new.

Why does it say: "Never needs baiting"?

@OfficialMaxwellYT

8 жыл бұрын

that's the bait to get you to buy the trap. table's turned

@eviltoad746

7 жыл бұрын

Its supposed to last for 6 months with a scent mice love. After 6 months, put peanut butter across the WHOLE pressure plate. the PB will be caught in the little holes.

I caught one just now with this haha, them sticky traps kinda suck lol