Unboxing- How to install the MOD 1/5 scale gas kill switch

Here is the Unboxing, facts, and installation of the Large Scale MOD kill switch. It’s the smallest, lightest and 100% guarantee to work with a lifetime warranty for a free replacement if it ever fails. Recommend to use with a well known brand controller. Link below to purchase this amazing product from MOD!!
Button activated using controller with open slot in the receiver:
modspeedshop.com/collections/...
(NO AUX available) turn off by using controller power button style:
modspeedshop.com/collections/...

Пікірлер: 29

  • @GoFastRC
    @GoFastRC3 жыл бұрын

    Sick video!! Even though I don’t have a 5th scale I still like to learn about them just in case I get one in the future. 👀👀👀

  • @nadersedaghat5694
    @nadersedaghat56942 жыл бұрын

    I just bought this last week and it works great. But I don't understand why MOD charges $100 for this kill switch when in fact is the same exact kill switch as the hillteonics that sells for $49. Come on mod we are supporting you so you also need to support us and bring the price down.

  • @VonHanzee

    @VonHanzee

    5 ай бұрын

    You are in the wrong hobby if you are into nickel and diming and whining about prices.

  • @nadersedaghat5694

    @nadersedaghat5694

    5 ай бұрын

    @@VonHanzee I am exactly in the right hobby. Some people like you love to get bent over and take it up the ass for the same product but double the price. I guess it must feel good that's why you don't whine about it. 😆

  • @nitrogas5719
    @nitrogas57193 жыл бұрын

    I have a dynamite on mine, I guess I should get ready for it to fall apart, mines been going good for now though for 3 months

  • @largescalercnation

    @largescalercnation

    3 жыл бұрын

    As long as it works, run it 👍. When it stops you know which one to grab. Hopefully yours last a lot longer than mine 😂👍🍻

  • @nitrogas5719

    @nitrogas5719

    3 жыл бұрын

    @@largescalercnation 😂,thanks man

  • @RicardoHernandez-rt8gz
    @RicardoHernandez-rt8gz7 ай бұрын

    Purchased a MOD Killswitch with auxiliary, but mine does not blink when I turn off my receiver. Anything I might be doing wrong?

  • @gregcarthan4488
    @gregcarthan44883 жыл бұрын

    Great video! Very informative.

  • @nitrogas5719
    @nitrogas57193 жыл бұрын

    I had a quick question about fuel, what gas do you run in your 5t? I can’t find any ethanol free where I’m at, I’m in riverside county

  • @largescalercnation

    @largescalercnation

    3 жыл бұрын

    I run pump gas 91 normally at Chevron. There is some spots like in Temecula that sells race fuel. But normal fuel is just fine

  • @nitrogas5719

    @nitrogas5719

    3 жыл бұрын

    @@largescalercnation I called downs energy in Temecula but they said their fuel contains ethanol too, I guess I’ll continue running the chevron 91

  • @jasonking5073
    @jasonking5073 Жыл бұрын

    What transmitter is recommended I'm using the dx2e or I have a dx3 smart

  • @largescalercnation

    @largescalercnation

    Жыл бұрын

    DX5 rugged or pro. Just depends on your budget 😊👍👊 Both are 5 channel so you will have enough slots to run your kill switch and transponder (if racing) both work great. Thanks for watching, commenting, and supporting the channel 😎🔥👊👊

  • @kennethcombs4419
    @kennethcombs44193 жыл бұрын

    My Led light is blinking red,Will not turn solid red.The Mod kill is blinking green .Any idea what is going on. ?

  • @largescalercnation

    @largescalercnation

    2 жыл бұрын

    It’s not recognizing a signal. Most likely the channel is not set properly, controller not on, etc.

  • @rcbrooks3543
    @rcbrooks35436 ай бұрын

    I installed a mod killswitch in my Baja. 3rd channel and it's not working. It's a plug-and-play. The light responds correctly but it will not turn off my motor. I can even start the car with the remote turned off. DDM won't answer the phone and some guy emails me and said I need to program it. No I don't!!! It's not working and my Swana mx-v works.

  • @kengerman1014

    @kengerman1014

    3 ай бұрын

    Did you get the one with the aux switch? If so. Bind the kill switch with kill switch on and then turn off the kill switch. (Light off) and re bind with kill switch light off.

  • @carlwill5009
    @carlwill50092 жыл бұрын

    Well that work for RC gas airplanes dle engines eme DA engines and there's a lot more gas RC engines out there

  • @stevenmaines9114
    @stevenmaines91143 жыл бұрын

    It the killer bee one as good as the mod???

  • @largescalercnation

    @largescalercnation

    3 жыл бұрын

    Yes that’s a good kill switch. I’m not sure if they have warranty though

  • @stevenmaines9114

    @stevenmaines9114

    3 жыл бұрын

    @@largescalercnation yeah the mod a hundred that's a lot for just sum wires

  • @sidworld8317
    @sidworld83173 жыл бұрын

    Understand you want people to buy the mod kill switch but you don't got to be line about the other one is actually pretty good

  • @largescalercnation

    @largescalercnation

    3 жыл бұрын

    Hey Bud, great point. I actually purchased the other kill switch first and it broke after only a handful of times, if something works better for you, I say run it. But I won’t recommend products to guys so they waist hard earned money on a product that I personally had issues with. I say run what you like and works best for you. I purchase everything that I run and don’t make money off my vids, so there’s no gain for me. Only looking out for my fellow Large Scale Nation buddies 👍🍻🍻🍻 Cheers. Thanks for the input bud

  • @tontobb8956
    @tontobb89562 жыл бұрын

    Mods a rip off good switch. Plenty of other good options Killer bee And lots of others I won’t pay exorbitant prices

  • @JOEMAMMADRINK40Z
    @JOEMAMMADRINK40Z3 жыл бұрын

    Hey, which MOD version do YOU really prefer, the aux or none? Have any reason why one is better than the other? I have 3 cars and NEVER run a Kswitch-even though I have 2 'Killers' in my parts bin-the instructions are sorta intimidating to me, 8^/. I use a FUTABA 4pv and want to keep those Aux chnls free for lights. Thanks.

  • @largescalercnation

    @largescalercnation

    3 жыл бұрын

    I prefer the Aux. I always kill my car with the designated button assigned. Non Aux is for controller that doesn’t have the capability to kill it by a switch or not enough open aux on the receiver

  • @largescalercnation

    @largescalercnation

    3 жыл бұрын

    You can also use the aux and add a y splitter for lights. But both are great and get the job done 👊👊

  • @JOEMAMMADRINK40Z

    @JOEMAMMADRINK40Z

    3 жыл бұрын

    @@largescalercnation Hey, thanks man, you;re one of the few r/c folks that actually make this vid posting/question stuff worthwhile...for some strange reason the 'gas guys' usually respond/Help....maybe I'll post a video of me bombin' round sometime....once I figure out that in-cam Hero-Gopro junk!Thanks dude.Take care.