Awesome video,i have my redcat rampage mt coming in on friday.I'm going to order my killerbee switch now,also ordered a venom 5000mah 6v hump pack.I can't wait :)

Also, remove the red rubber cover off of your old stop button and put it on your new stop button, to keep dirt out of there.

Changing the pull start rope is really easy to do. And with a Traxxas TX with the 2.4, and TQI, the Tx will store up to 30 models when used with the Traxxas Rx. So you won't have to go out and buy a new Tx every time you get a new rig. Just get a Traxxas Rx, and you are good to go. They are really easy to bind, and easy to set up. I'm using a Traxxas Tx on 4 different trucks, and all 4 are different models from different manufacturers. I just bought a Traxxas Rx and hooked them up.

Very cool man I love getting that big box in the mail all shiny and new !

Had a runaway once, totally sucked. Battery cover popped off remote, batteries tumbled out. It was like in slow motion too. I was like oh look at that, next thing the truck took off full throttle, hit second gear and just plowed straight and square into a concrete wall. Bent the front of the frame up a good 45 degree's, shattered everything that was plastic/factory from the midframe cross bracing forward. Spent probably close to what it cost new on replacement carbon fiber and aluminum. Straightened the frame in a large vise.

Thanks for the tutorial video of the killer switch.

Just getting into the 1/5 scale so I'm starting out with the xt rampage will I have a similar set up installing the super bee

Just wondering something. Saw how the wires came close tom the cylinder head. Are the wires heat proof? Or should say the coverings of the wires.

Awesome video brother.. made it super easy to understand and directly to the point, I didn't think I was gonna find a video tbag did as well as you did at explaining it.. you definitely got my sub.. thanks again

Hey have you heard how it works with the stock rampage mt reciever and transmitter with this kill switch? Thanks for the video..

So can you use the bind/ch3 after you bind the reciver/trans of it's a 3 ch receiver?

hello @ 7.40 how do you get the RED wire on to the plug at the back of the COIL , without taking it off the motor thank you for your help

Awesome video thank for taking the time and showing how to install the killer super bee remote kill switch. 😊

I just order the Rampage XT, can't wait for it to be delivered to me on Tuesday, my first real RC car, any pointers and anything I need to know, I am noob getting into the hobby,.

Excellent video Thanks

How do you keep it so clean

where does the battery connect in the reciever?

How about the contrller do i have to buy the same like yours?

thank you for posting this video

nice video body been checking on your channel so far I like them all

Dose this have lost signal cut out function buddy

Thanks man this helped a lot! :D

I don't know why they simply wont send these vehicles with pre-installed kill switches right from the factory.

@RCAddictMakuloco

8 жыл бұрын

+Starguard ! Agreed.

I notice all those new cables are directly touching the head of the motor have you had any heat problems with them? thanks

@RCAddictMakuloco

7 жыл бұрын

No problems

hello, recently I have installed a kill super bee, but I see that the led light is in an orange tone similar to red instead of being in blue ... they took models with other colors or perhaps I have something wrong connected. Greetings and I hope you can help me.

Great video

Cant you just take off the the top shroud, just one screw, you can get to the switch with out removing all the covers

What is the voltage on your remote?

Was the switch waterproof as well as the buzzle?? Ganna get 2 set for my Baja's...

@RCAddictMakuloco

9 жыл бұрын

quekgary No I don't think so but I am not worried about it.

@quekgary

9 жыл бұрын

Thanks for the reply...I've done 2 set of kill switch for both my Baja's.. Thanks bro....Cheers!

How much channels is the stock traxxas summit 4 or 5

@RCAddictMakuloco

8 жыл бұрын

+audiojunkie 808 transmitter is 4ch the receiver is 5 channel

Great learning video, Thanks

How did you get it working on your traxxas receiver

@RCAddictMakuloco

4 жыл бұрын

I used the transmitter and receiver from traxxas.

nice video... I'm also putting in a killer rc super bee kill switch I already have a traxxas summit can I just buy another tqi receiver

@RCAddictMakuloco

8 жыл бұрын

That's exactly what I am doing with mine and it works perfect back and forth between models.

I am looking for a rc car large scale

Good video. Thanks for posting it. I like to put a zip tie around the cable and the bottom standoff of the ignition coil, to make sure the cable doesn't get near the spinning flywheel. As shown here. www.killerrc.com/forum/viewtopic.php?f=25&t=586

Arnoob I love Vdioat Malatek

thanks brother good

thanks

redcat says all their vehicles come with a failsafe from the factory.

@diytypeofguy6502

7 жыл бұрын

RC Action failsafe only applies the brakes not kill the engine

@CarminesRCTipsandTricks

6 жыл бұрын

...... as he clearly stated at the beginning of the Video.

@tomrc4328

5 жыл бұрын

They do, but it requires power to be present and the throttle servo to be functioning. If you lost power, failsafe does nothing. If the servo failed, your engine keeps on going the same rpm. Kill switch allow the engine to be shut off no matter what happens.

a little plastick 1/10 cant do much. please take that back my rustler almost broke my leg during a speedrun

@RCAddictMakuloco

9 жыл бұрын

Tamas Murper Yeah but those darn rustlers fly anything at that crazy speed will hurt.

@tamastenhaaff2291

9 жыл бұрын

true

thanks brother good

thanks

thanks brother good

thanks