I am 71 years old and I did mine in about two hours. Drilling was the toughest part as my drill bits were not as sharp as I would have liked. Directions were great and easy to follow. Big relief not having to worry about those cats being thieved by some lowlife. Looks great too. Rust in Southern California. . . no worries for me.

I just installed this plate on my Tacoma. Took me about 4hrs to get the holes drilled and the inserts installed. It was a bit of pain, but doable, however I do see the benefit of a professional install. I got a couple of bruised knuckles, and tight neck muscles😉.

I got it , installed it in driveway with help of wife , totally happy. Hardest parts was jacking and securing the truck safely . Holding and fastening shield up while on my back . Great vid

@mufflertech

2 жыл бұрын

Thank you, I appreciate you watching.

Important work you guys are doing there.

@mufflertech

2 жыл бұрын

Thank you JP!

Cool video looks great

That plate is pretty good ! Nice video

@mufflertech

2 жыл бұрын

Thanks!

The frame metal is tough to drill. I sped up that process by drilling a series of smaller holes, which allowed the 7/16 inch drill bit to bite into the metal. I put the plates together with the bottom plate upside down, and saw my error after reviewing this video. As I look at the plate, I think: "How long will it take for a cat thief with a battery powered metal cutting disc to cut off this aluminum plate?"

Do you have video for 2nd gen Tacoma cat shield install?

Do they make one for the 2018 Honda CR-V?

Hey, your videos are fascinating considering I am clueless when it comes to most things automotive-related. With that being said, I have a 2016 Tacoma 4 cylinder 2 wheel drive--there is not a Cat Security shield for that configuration (only the V6), is there a reason that for that? Thanks!

@mufflertech

2 жыл бұрын

It's simply a demand problem. Most Tacoma's sold are the V6 and the product demand is higher for this configuration.

Thanks for the video. With all of the other places its bolted up to just curious why those extra 4 drilled holes absolutely have to be there? I lnow itll be fine but would like to not drill/put holes in the frame. Thanks for your video.

@mufflertech

Жыл бұрын

We’ve never tried it without. The harmonic’s of the resonating tones from the internal combustion engine can cause vibrations in the aluminum without proper attachment points.

Wish they have it for accord already

Do you guys paint/seal the holes you drill to prevent frame rusting? Or is that not really an issue in your part of the country?

@mufflertech

Жыл бұрын

Not an issue in California.

How would you change the oil

Do they provide the socket for installation? What size is it? Good video btw.

@mufflertech

2 жыл бұрын

Good question, yes, it comes with it.

@joesmith3908

2 жыл бұрын

Don’t tell us the size, we don’t want the thieves to know. Hehe

Would you say these bolted security shields are better than the welded kinds?

@mufflertech

Жыл бұрын

There's a number of reasons, a few of which are: -Welding to a frame of a vehicle is generally not advised -If you were to weld it it need to be like metal to do so and steel is a lot heavier than aluminum and much more susceptible to corrosion -A shield that is bolted on can be removed for servicing down the road -If your vehicle is under warranty a welded shield may void it

Do you need to protect the C/C if you have a full CBI skid panel system installed ????

@mufflertech

2 жыл бұрын

I’m not familiar with this set up

Did you have to remove the TRD skid plate to install that? Great video BTW!

@mufflertech

2 жыл бұрын

No.

I have an RCI skid plate installed to protect that exhaust cross-over pipe. Would there be any issues with this concerning installation?

@mufflertech

2 жыл бұрын

There shouldn't be. If you bring it in to us we can verify. If there is an issue and we cannot install it we wouldn't charge you for anything.

@eddiesaninocencio7486

2 жыл бұрын

@@mufflertech Great!!

Torans precision fabricating located in Texas.

@mexicutioner420

Жыл бұрын

what part of texas??

Hello, do you have them in stock, or have to order for them?

@mufflertech

2 жыл бұрын

We keep them in stock. With the amount of demand we have for these please call before you come in to make sure we have them on the shelf. (916) 421-0399

Where can I purchase those special socket bolts for my nv200?

@mufflertech

2 жыл бұрын

We make them in house. We put them on at our shop. We don't currently sell them as parts.

Do you know if they make any for a 2016 accord ? I haven’t been able to find any

@mufflertech

2 жыл бұрын

They do not.

@agustinherrera5600

2 жыл бұрын

@@mufflertech any idea where i can find one ?

@mufflertech

2 жыл бұрын

@@agustinherrera5600 No sir.

How much do you charge for the install?

@mufflertech

2 жыл бұрын

We don’t post pricing online due to the volatility of parts and labor cost. Please call the shop for current pricing. 916-421-0399

Can it be installed on a 2016 V6 2wd model?

@mufflertech

2 жыл бұрын

getcatsecurity.com/purchase-online/ols/products/cat-security-toyota-tacoma-2005-2015-2wd-2-wheel-drive?gclid=CjwKCAiA_omPBhBBEiwAcg7smRBuzNwR9rp6LgkVugawAxSrlfhuYSCx_C9PeBQKhgxJ4LGpbE9VsBoCrGQQAvD_BwE

Are you making them for the 4 cylinder tacos

Could I get around it without drilling holes?

@mufflertech

2 жыл бұрын

No, it requires the threaded inserts for proper attachment.

Let me ask you please what year Tacoma are the target for the catalytic converter theft I have a 2006 I wander if it is their target thank you

@mufflertech

2 жыл бұрын

It is a target.

@haroldvelasquez9185

2 жыл бұрын

@@mufflertech thank you

@SusieAspen

2 жыл бұрын

@@mufflertech What about a 2004 Tacoma???

@daverossi6476

2 жыл бұрын

I have a 2006 Tacoma PreRunner and it was targeted in my driveway. Fortunately I interrupted the thief and they took off. They had almost completely cut through the pipe in front of the CC but I was able to weld repair it. Considering the cost of a new CC this shield sounds like a good investment.

@haroldvelasquez9185

2 жыл бұрын

@@daverossi6476 thank you I’m sorry for thieves tried to get your CC

We sell these as well. For 4x4 and 2wd. Tundra 4runner as well. Ours are one piece no assembly required

The Talons garage version requires no drilling

@mufflertech

2 жыл бұрын

And it is a very nice product. We prefer the cat security part because of all the extra attachment points. It offers a more secure end result albeit more work to install.

Will this work on a 2006 Sequoia?

@mufflertech

2 жыл бұрын

They are not currently offering it for that genre

As long as there is demand for the precious metals inside the CAT the theft will continue. At some point the demand will drop & the theft will stop & I hope soon. This is becoming ridiculous.

2way alarm and pistol is about the same cost and way more effective..

Link?

@mufflertech

2 жыл бұрын

getcatsecurity.com/purchase-online/ols/categories/toyota-tacoma

Lol 3 hours I did mine in 35 minutes.

@mufflertech

2 жыл бұрын

The time of install will vary depending on experience.

What’s a ballpark price for this sort of thing?

@mufflertech

2 жыл бұрын

The sheilds start at $329 currently.

@MrSaturnino1

2 жыл бұрын

Can I purchase the shield and have Muffler Tech install it or you have it in the shop. I saw the 916 area code for the shop which is in my area. Can you provide the address? Thanks!

@mufflertech

2 жыл бұрын

@@MrSaturnino1 We stock them. The shop address is 6160 Florin Rd. Sacramento Ca 95823