If your having trouble tightening the security screws or the other bolts remember to back off all other hardware and tighten everything in small increments. Take your time and they'll start to all tighten evenly. I added torque strip to insure if anything does back off I'll see it easier.

Love the channel! I’ve only some basic knowledge about vehicles and already feel more confident in understanding my Tacoma. You’re informative and to the point, even with things that could seemingly be considered common sense, also love the added video effects like the torque wrench display. Def passing your channel on to others to enjoy

@yotaxpedition

Жыл бұрын

Awesome! Love to hear this. Glad we could help you.

Ok... this is a great video if you have a lift and nice tools. My tacoma has a 3" lift with 33"s so I had some room under there with no Lift. It's doable. The key is follow his order exactly and don't get pissed off when you can't get the security bolts to screw in. Once you get ONE securtiy bolt, you're home free. The key like he says is to KEEP ALL BOLTS LOOSE and tighten each one and rotate until there all tight, not just one at a time. You need gloves, I cut my hand to sh---It, the shield is sharp!

@yotaxpedition

Жыл бұрын

Thanks for the feedback!

Thank you for the good installation video. I have just now ordered a set for my 2018 Dual Cab 4x4.

@yotaxpedition

Ай бұрын

Glad we could help!

Just install these, Great product. Use the factory bolts, the 'safety' bolts didn't thread right. Pre-spray the factory bolts with penetrating oil while you're waiting for the parts to arrive, Note you may have water trapped in the frame that will drip out when you loosen the crossbars. BTW, Cat theft has been a thing for 15 years.

@ZadyMongoose

6 ай бұрын

Yes because Cat theft definitely didn’t exist from 1980-2007

@jeffmaas2792

2 ай бұрын

Tried installing drivers side. Cat shield doesn't allow support bar to sit flush against body so bolts don't go in all the way leaving small gap. Anyone else experience this issue?

Do you guys have a shop somewhere between San Diego to Los Angeles ? I got a Tacoma 2024 and would like to have a catalytic converter installed . Toyota won’t install it

@yotaxpedition

4 ай бұрын

Sorry we do not. We are located only in Pennsylvania

Thank you, please assist me where I can get “2017 tacoma catalytic + converter anti theft shield. Some one cut and still my catalytic converter

I have a 2021 Tacoma 4x4 Automatic with V6 - Will I have to remove the Guards when I get my truck smog next year? I believe they have to read some numbers or code from the side of the Cat Converter?

@yotaxpedition

9 ай бұрын

Hey Scott. We are in Pennsylvania and do not have smog here so I am unsure exactly what they do.

Hi, I just installed mine today 4/14/24 the driver side was much harder to install than tha passenger side But I got them on Have you noticed any heating issues?

I just ordered the cali raised shields for 2023 Tacoma limited It's a 2Wd with the option of 4wd hope they fit

@yotaxpedition

4 ай бұрын

Did you pick the 2wd or 4wd shields? The 2wd ones will not fit a 4wd Tacoma

@nickk3085

4 ай бұрын

@yotaxpedition I ordered the 4wd, and I called them up, and they said it would fit I'll see when I get them, thanks again

@nickk3085

4 ай бұрын

On the tailgate, it has 4x4

1st gen sequoia suggestions? Do they make a version for the 1st gen sequoia? I'm reluctant to have a cage welded around the cats but that might be a better deterrent. Thoughts?

Hi i just received mine today 4/12/24 is there any rattling on the driver's side I think i got the new version

Reinstalled the brackets and they touch the converter shield. Is that an issue?

kinda wild that the cali raised shield came with zero instructions, and they dont even have their own video.

@yotaxpedition

10 ай бұрын

Good thing we made videos lol

Hi again, I need for passenger side only, because of 2 W drive

Do they make this shields for stick shift ?

I find your 30 minute estimate for install to be rather funny. I installed the Cali Raised converter shields yesterday and it took me 8 hours AFTER The raised my vehicle. When I purchased my kit I read everything available on the YOTA web site and also on the Cali Raised site. The problem I had is that my 4 Runner is equipped with an XREAS system which had metal hyd lines that run behind the motor crossmember. I had to cut the shields at the motor end in numerous locations. Not being armed with this information made for a very miserable day. However, had I known this much modification(read cutting) was necessary, I still would have purchased this product. This is a great product and well engineered. I was just unhappy about the unknown additional work required. Thanks Paul

@yotaxpedition

9 ай бұрын

Hey Paul, we have it listed on our page that these do not work with XREAS models. You made it work but you can see why it's listed that way.

@user-pz5bx1tq3u

9 ай бұрын

@@yotaxpedition Good morning, My apologies. I guess I missed the XREAS note. But I must admit listing that the shields won’t work with XREAS if s a disservice to anyone who knows how to use a hacksaw. I am a gearhead from way back. I am 70 years old and I live in a small village in Belize. There are no auto mechanics here, no auto parts stores, none of the conveniences of the US, and I made it work, so it IS possible, just time consuming. Now that said, I just received my Eibach Stage 2 susp from you guys so that will go on next. Had I installed the susp first the XREAS would have been removed before the shields. Live and learn boys! Thanks for your reply.

@yotaxpedition

9 ай бұрын

We have it listed the same way Cali Raised has it listed. MOST people wouldn't be able/ want to cut them up to make it work. Anything is possible with a welder and cut off wheel but way more people don't know how to use those tools vs the people that can. Glad you got it done though.

Hi again, I need for passenger side only, because 2 W drive

I have a 2023 trd pro Tacoma once I put the shield on I can’t get the cross arm to sit right in order to tighten the bolts all the way

@Tacomadude76

9 ай бұрын

I just ordered this for my 2023 Tacoma TRD PRO. Did you get the cross arm on it with no issues?

@user-vq6ht1te4u

9 ай бұрын

I did i was doing it without lifting it at all and struggled a bit but once I put it on the ramps it was a lot easier

Hello. Very informative video. Awesome explanation. I have a 2020 Tacoma SR5 4 cylinnder NOT V-6. My cat converter was stolen(cut) a month ago. Locking for it to add security to the one i had replace it (stolen converter). Do you know if your product fit my vehicle specification?. Thanks in advance

@yotaxpedition

Жыл бұрын

Unfortunately this only fits the V6 models.

Bro what about 23 Toyota Corolla?

Is the passenger side any harder to install, since it has that shield on already? And will the passenger side make any rattle noise?

@yotaxpedition

Жыл бұрын

Are you in the states? Every one i've seen the shield is on the driver side cat.

This doesn't void the warranty by the manufacturer, right?

@yotaxpedition

9 ай бұрын

No, you'll be fine with these installed.

Is there a new version for the 4 runner I just got mines like a week ago but i feels like it hits the cat

@yotaxpedition

Жыл бұрын

I'm not 100% sure but I think they updated that as well.

I have a 2021 trd 4x4 Tacoma would these fit perfectly??

@yotaxpedition

10 ай бұрын

Yes they would fit.

You know what sucks! I ordered these a week ago and had to cancel my order because I’m AWESOME and drive a 22 M/T Taco that these Shields are not compatible with A/T Only 👎

@yotaxpedition

Жыл бұрын

I personally drive a manual 3rd gen 4runner so I know the feeling of being awesome lol.

What is avg price of install. Just do t want to get ripped off

@yotaxpedition

11 ай бұрын

Its shouldn't cost that much to have them installed. At most an hour of labor time. Depends on what shop you go with and what their hourly rate is.

Will they fit on 2023 Tacoma limited

@yotaxpedition

5 ай бұрын

Yes they will fit

What wheels and tires are y’all running on that taco? 🔥

@yotaxpedition

8 ай бұрын

Those are the Traverse HD wheels from Fifteen52 yotaxpedition.com/products/fifteen52-traverse-hd?variant=43035655471340

Will it work on a base 4cyl sr?

@yotaxpedition

Жыл бұрын

Current fitment is for V6 only

I just got my installed and I loved it.looking really sexy

@yotaxpedition

Жыл бұрын

Nice!