Toyota 4Runner Crawling: The Kyosho Mini-Z 4X4 1/24 Scale Truck

Спорт

Have you seen the ultra detailed 1/24 Mini-Z 4X4 Crawlers from Kyosho? Take a look.
Kyosho Mini-Z 4X4: www.amainhobbies.com/kyosho-m...
Kyosho Mad Van: www.amainhobbies.com/kyosho-f...
Need AAA Batteries?
Alkaline: www.amainhobbies.com/fuji-env...
NiMH: www.amainhobbies.com/kyosho-s...
For all of your RC needs visit AMain Hobbies: bit.ly/XcAuJr
Follow us on Instagram: / amainhobbies
Like AMain Hobbies on Facebook: / amainhobbies
Follow @AMainHobbies on Twitter: / amain_com
MUSIC BY: @DCUTTERMUSIC / HTTP://WWW.DAVIDCUTTERMUSIC.COM

Пікірлер: 243

  • @jamietwigg5152
    @jamietwigg51524 жыл бұрын

    I own a full size first gen, I love it

  • @EcBuddy123

    @EcBuddy123

    4 жыл бұрын

    This rc might cost closer to what my 1st Gen cost me haha still want it

  • @zanguiefcarcasse3628

    @zanguiefcarcasse3628

    4 жыл бұрын

    Full size one is a beast! Toyotas on ruff terrain is well known in Australia, Africa, Madagascar, isolated islands... a name of trust and confidence. Durable if well maintained. Kyosho brand is a brand I love and trust also. The body is looking so cool ! But so much negative to say from what I see and here is why. First the use of philips screws. So the less efficient,non durable screw is used for a hobby grade rc car? The pressure you apply to screw it up stress the thread on tiny screw. And they use tiny screw ! Philips screws wear fast even with a brand new screw driver. Instead of n1Torx and n2 allen screw for tiny screws they are durable. AAA batteries. Can we charged them from the car using rechargeable accus with a cable, like they used to do with their remotes .Or do we have to open the body every time the battery is flat? If you go eco friendly with accus on the track for a race or fun you have a less powerful rig than the others that buy Normal AAA? And if they don't care about the recyling of the used batteries ! Huge eco friendly problems here! And money to your supermarket every week or day for the batteries? Hey common sense, evolution on the way up rigth? This is not a good way to support hobby shops! Nimh battery could be fine if lipo risks was an issue. Wheels from this miny z 4x4 will only fit this rig. So the choice for after market parts or swap from other rigs is very low. If it would come with FPV camera for this price, with allen or torx screws, cable to charge the rechargeable batteries from the car. Then i will buy 20 of them and quitt my job to open a hobby shop with a circuit and have fun with them! When a car goes flat it will go to the pit where the charging platform is waiting for it, and grab another resting one ready to run from the pit to race. With the wireless charging technology this sounds like a good deal. I can't buy this Rc for this price. Even if it is on a beloved brand. I don't get for my money for sure compare to the Rcw4 gelande 1/18 based more on scale . And compare to a good named brand in crawlers, we are getting more value on the scx24 than this mini z. SO this product need to be improve for me to buy it at this price. Kyosho is known for affordable good quality rigs with good racing performances. And I don't recognized them in performances and quality right here! Based on the budget. If I wasn't so sad about it, i would of shut my mouth!

  • @stpbasss3773

    @stpbasss3773

    3 жыл бұрын

    @@icup7802 well if you look at the price of the mini z cars then this truck isn't that high priced, that's just how the kyosho mini z is but they are quality.

  • @dannymendoza8719

    @dannymendoza8719

    3 жыл бұрын

    I am a first gen

  • @tjenkins1126
    @tjenkins11264 жыл бұрын

    I really like how detailed it is, but would definitely like to see Kyosho venture into 1/10 crawlers. Think if they did with the same details as this, just larger scale and kept them in the $400-$500 range, home run. Even make a 70% kit like the KORP. I'm a big fan of their products now having the MV and the KORP. Good stuff as always my dude!👍🍻

  • @Ivebeenhad
    @Ivebeenhad4 жыл бұрын

    Very detailed info that you include in your reviews is why I come back. Others miss a lot of info.

  • @jasonberning1086
    @jasonberning10862 жыл бұрын

    I think what impresses me most about this video is your guys selection of K-cup pods!

  • @treemanog112
    @treemanog1124 жыл бұрын

    Oops. Look like I just went broke. Damn you kyosho for making the exact product i was looking for at this exact time

  • @RCAddictsGarage
    @RCAddictsGarage4 жыл бұрын

    Love the replay with the sfx.."ahhhh...kabam" lol. Nice coffee selection too. 😁

  • @ReadySetRC
    @ReadySetRC4 жыл бұрын

    Seems like a pretty fun platform. Can't wait to get this in my hands👍👍

  • @dburton7929
    @dburton79294 жыл бұрын

    Very nice detail, the best I’ve seen stock, right out of the box. A bit pricey, but again, the scale points are huge !

  • @Brian_Mowry__BMOW71
    @Brian_Mowry__BMOW714 жыл бұрын

    Great review! That is a cool nicely detailed little tiny rig! I must get one! Thanks for sharing Brett!

  • @drjavogel
    @drjavogel4 жыл бұрын

    Way to make me want to buy yet another RC! That little truck is beautiful and built Brett-proof tough. Great video again. TBongos

  • @montesamapping
    @montesamapping4 жыл бұрын

    Best 1/24 ever seen !

  • @stevejackson3564
    @stevejackson35644 жыл бұрын

    That's pretty cool to come out with a new idea I can't wait to see what other ideas they come out with for the off-road excursion

  • @SuppleBun
    @SuppleBun2 жыл бұрын

    Just picked one up on your website! I'm super stoked, it's such a cool lookin truck

  • @tomandrews5392
    @tomandrews53924 жыл бұрын

    Wow the detail in the body is just great ...1/24 scale cool....

  • @Sponge1310
    @Sponge13104 жыл бұрын

    I’m loving the Mini-z 4x4 😍 I’ll be getting the Suzuki Jimny in the yellow color as soon as a shoo has’m available 😎 Hopefully the led light kit will be available at the same time too.

  • @blueterror2276
    @blueterror22764 жыл бұрын

    The fact it uses triple A batteries is what I like, because you can't charge a lipo during a blackout. With AAA batteries you just plop them in and if you run out of charge just put in new ones Don't know why Ppl keep complaining that it doesn't use a lipo

  • @onefastslimjim

    @onefastslimjim

    3 жыл бұрын

    Especially because this is a collectors item, since everything runs off of triple A's, you can use it 10 years from now without having to worry about a battery that possibly isn't made anymore.

  • @Rorona550

    @Rorona550

    3 жыл бұрын

    Because buying batteries and having to throw them away is annoying

  • @onefastslimjim

    @onefastslimjim

    3 жыл бұрын

    @@Rorona550 then buy rechargable AAA's lmao

  • @mmoskon
    @mmoskon4 жыл бұрын

    I love it! Now we just need head to head comparison with scx24 ;)

  • @JRJRCrawlers

    @JRJRCrawlers

    4 жыл бұрын

    @Ezra Redgwell scx24 isnt scale at all especially with a lexan body... The SCX is meant to be beyond capable and do lines the real rigs wouldn't do, this rig is identical to wheeling the full size and what true scale enthusiasts are looking for.

  • @JRJRCrawlers

    @JRJRCrawlers

    4 жыл бұрын

    Ezra Redgwell of course it would it’s a lexan body... 😂🤦🏽‍♂️ Plus larger wheel base like a 1/20 really! No one cares because there’s no comparison!

  • @vapeurdepisse

    @vapeurdepisse

    2 жыл бұрын

    @Ezra Redgwell Right and my foot would kill the SCX

  • @muchagrande1687
    @muchagrande16874 жыл бұрын

    Finally a miniz crawler.. So logical. Miniz over axial anytime... If previous miniz quality is continued... Seems so. Batteries are a great plus compared to the lipos. Cheap, safe, flexible with endless runtime. I hope this also creates attention to the other miniz cars. True gems for every scale rc enthusiast.

  • @sugarpillkiller
    @sugarpillkiller4 жыл бұрын

    Got mine on order! 1/24 is awesome.

  • @MelbourneExclusive0

    @MelbourneExclusive0

    3 жыл бұрын

    How do u like it so far

  • @threestarsandasling
    @threestarsandasling4 жыл бұрын

    now THIS is the truck I've been waiting for 😮

  • @dbbiking5505
    @dbbiking55054 жыл бұрын

    Just shared this on my page Paddlesworth rc fb I reckon kyosho have made a winner with the changeable gearing great informative vid thanks I'll be getting one for are 1/24 indoor course

  • @paulclancy2404
    @paulclancy24044 жыл бұрын

    Kyosho always been top tier comes to rc , makes them one of the best is they march to there own beat .🚗🚗🚗🙂

  • @RCCarRacing
    @RCCarRacing4 жыл бұрын

    Awesome content, great video! Like it!

  • @tbocfoRC
    @tbocfoRC4 жыл бұрын

    I pre-ordered the Jimny! Can't wait.

  • @RyanRKJ
    @RyanRKJ4 жыл бұрын

    Love the detail on this truck. Suspension looks nicely dialed as well for the scale. It comes at a price though. This is not cheap for a tiny truck.

  • @kravenkrawlhobby5438
    @kravenkrawlhobby54384 жыл бұрын

    Amain.... you folks always have the best prices around. If I decide(talk The ole lady into it) to get one I’ll probably scoop it from you guys cause I know your pricing and it’s very competitive. $200 is gonna be hard to swallow for a 1/24 scale but I spend so much on this hobby it doesn’t really matter anymore.

  • @kravenkrawlhobby5438

    @kravenkrawlhobby5438

    4 жыл бұрын

    Oh yeah, nice look into the mini z 4 runner. Great review and the 4 runner is the only reason I’m going to scoop one.👍

  • @madness6915
    @madness6915Ай бұрын

    Nice review 👍👏

  • @HotshotJimmy
    @HotshotJimmy2 жыл бұрын

    Just ordered one of these for free using my built up American Express points. So excited!!

  • @treemanog112
    @treemanog1124 жыл бұрын

    this new style is going to be huge

  • @thatsmyrc
    @thatsmyrc4 жыл бұрын

    Nice review I picked up a few axial scx24’s they are a blast for fooling around house. I also have a bunch of upgrades I ordered, coming in with trickle effect as suppliers have them too ship

  • @MarcoAurelio-vi2wd
    @MarcoAurelio-vi2wd4 жыл бұрын

    Best review.

  • @goldenmanuever1176
    @goldenmanuever11763 жыл бұрын

    Kyosho never lets me up for air. Been taking my money since the mid-80s.

  • @hugoaguilar3073

    @hugoaguilar3073

    3 жыл бұрын

    😂😂😂

  • @rcx8971
    @rcx89714 жыл бұрын

    He's back we missed u

  • @Vato_Loco_rc
    @Vato_Loco_rc4 жыл бұрын

    Its a good indoor crawler👍

  • @gadgetorian-rctechgadgetsm4566
    @gadgetorian-rctechgadgetsm45664 жыл бұрын

    I'm totally buying this as soon as it's released but cannot decide on which color to get. I hate making tough decisions... Lol

  • @Phernandez0803
    @Phernandez08034 жыл бұрын

    I just won 1 in a waffle....came here to see the reviews on it. Im guna be happy with it.

  • @gingerssuck

    @gingerssuck

    3 жыл бұрын

    Belgian?

  • @jonthomas8487
    @jonthomas84874 жыл бұрын

    Hey Kyosho everyone wanted you to bring out a 1:10 and you gave us a toy to play with at the office

  • @grumpymissblysdroneadventu7224
    @grumpymissblysdroneadventu72244 жыл бұрын

    Just adding a 👍 from here!

  • @papachill
    @papachill4 жыл бұрын

    that thing is beautiful!!! performance might not be as good as the scx24 but scale realism wins all!

  • @kairasmussen4061
    @kairasmussen40614 жыл бұрын

    If did you ever seen a mini z race you will know how fast they can go with AAA batteries. At the beginning I think it’s stupid to use AAA batteries. But after I try I understand why this car are competition cars not toys. At 1/24 scale I ve got : RC4WD Gelande ProLine ambush ( 2 times ) FTX outback mini Ibex 1/24 And some mini z (awd, fwd, rwd, and buggies ) not crawlers of course And I can say that the Kyosho are ULTRA realistic And when I drive a crawler, at the end the most I appreciate is the realism. And Kyosho cars are incredible and amazing realistic I hope and Kyosho use to do, is , that will be more min z crawler bodies

  • @maximosolomon1385

    @maximosolomon1385

    2 жыл бұрын

    i guess it's pretty off topic but do anybody know of a good website to watch new series online ?

  • @ahmaddavis295

    @ahmaddavis295

    2 жыл бұрын

    @Maximo Solomon Flixportal =)

  • @maximosolomon1385

    @maximosolomon1385

    2 жыл бұрын

    @Ahmad Davis Thanks, I went there and it seems like a nice service :) I appreciate it !!

  • @ahmaddavis295

    @ahmaddavis295

    2 жыл бұрын

    @Maximo Solomon you are welcome :D

  • @paulguerrero972
    @paulguerrero9724 жыл бұрын

    😅😂🤣 I love this review!!!! Looks like I'll be getting the Jiminy!!!!

  • @JesseBMotors
    @JesseBMotors4 жыл бұрын

    And now to see a comparison with the axial scx24. I like that the scx24 comes with a 2s lipo.

  • @nelmov

    @nelmov

    4 жыл бұрын

    And 115 euros more cheap...

  • @gmax876

    @gmax876

    4 жыл бұрын

    I definitely prefer the price of the SCX24

  • @TJthercGuy

    @TJthercGuy

    4 жыл бұрын

    Scx24 would stomp these even with a hard body and it’s almost half the price 😂😂😂 Did you catch how easy this thing flips? Noticed he cut off soon as it did! 😅

  • @JesseBMotors

    @JesseBMotors

    4 жыл бұрын

    TJ the rc Guy yes. I really like my Scx24. I need to do more videos with it.

  • @TJthercGuy

    @TJthercGuy

    4 жыл бұрын

    Jesse B Motors I love my scx24 to! I have allot of videos on it check out my channel! 😉

  • @GrumpyOldManRC
    @GrumpyOldManRC4 жыл бұрын

    Now there's the Brett I know! Having WAY too much fun at a place he calls WORK! What I would give to be young and have a job like yours My Friend!

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    We definitely had some fun with this truck! Being able to use it anywhere is too tempting. -Brett

  • @GrumpyOldManRC

    @GrumpyOldManRC

    4 жыл бұрын

    Playing at work!😍😎🤣👍👍

  • @mlugin8050
    @mlugin8050 Жыл бұрын

    I think it‘s actually a 1/27 scle but it doesn‘t matter. I really like that little truck. I tried to put some slightly bigger wheels on it, but the added weight of the alloy rims and the grippier profile give the servo a hard time. Especially on grippy surfaces like the couch textiles. It works well with the brass wheelhubs. If you upgrade for bigger wheels better go with lighter plastic rims. I also changed the plastic front axle housing to the kyosho die cast housing. That‘s expensive but it works great, it climbs much steeper without tumbling back and it looks nice. I might put some kyosho oil dampers in it (expensive too). I don‘t want to change to the furitek frame. I keep it all with kyosho parts if there are upgrade parts coming out. I might buy some bigger crawler where i can choose to upgrade electronics easier. But i keep the mini-z as kyosho as possible. I like the limitations of it, first i didn‘t, but now i think it‘‘s challenging and really fun! Sometimes it‘s surprisingly capable where i didn‘t expect it. And its beautiful

  • @MoSuntzu
    @MoSuntzu4 жыл бұрын

    Nice video! I wish you did a size comparison with a mini-z racer MR-03 or buggy so we could see the size difference.

  • @yaneura390
    @yaneura3902 жыл бұрын

    Stumps are good!

  • @life_before_and_after
    @life_before_and_after4 жыл бұрын

    молоток видео)) приятно смотреть

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    Спасибо!-Brett

  • @life_before_and_after

    @life_before_and_after

    4 жыл бұрын

    Так держать👍👍👍

  • @rc.obsession8207
    @rc.obsession82074 жыл бұрын

    8:12 Hey I’ve got that same HTRC charger! How are y’all liking it so far?

  • @Rokstardad82
    @Rokstardad824 жыл бұрын

    I’d like to see if I could add a little grease to those shocks because that little thing is bouncy lol

  • @rajgill7576

    @rajgill7576

    4 жыл бұрын

    Would other 24 scale shocks work? I have a whole shit losd of spare parts from my old losi micro sct. Aluminum shocks

  • @TheTechCguy
    @TheTechCguy4 жыл бұрын

    A rock crawler that can go anywhere.

  • @jdsrcs8061
    @jdsrcs80614 жыл бұрын

    I like!!!! Now I have to decide which 1/24 crawler to get.

  • @johnnycash7803

    @johnnycash7803

    4 жыл бұрын

    I'll decide for ya scx 24. Not this thing with AAA batteries

  • @jdsrcs8061

    @jdsrcs8061

    4 жыл бұрын

    @@johnnycash7803 Hahahahahaha sweet!!! Thanks Man in Black!!!!

  • @johnnycash7803

    @johnnycash7803

    4 жыл бұрын

    @@jdsrcs8061 haha

  • @RW-zh7kl
    @RW-zh7kl3 жыл бұрын

    Thats pretty awesome, im trying to decide which mini z to get.

  • @brsrc759
    @brsrc7593 жыл бұрын

    DAAAAMN!

  • @newyorkboss6124
    @newyorkboss61244 жыл бұрын

    I meed to stsrt of wit this as my first rc 😁

  • @fernsolo
    @fernsolo4 жыл бұрын

    The turnoff for me is the batteries, I'm sure a lipo conversion is coming, everything else is beautiful 👍

  • @paulmccarter908

    @paulmccarter908

    4 жыл бұрын

    I've had several Mini Zs and the batteries are actually a plus. You get near an hour of driving, and no lipo safety worries at all. Get a good 4 bay charger, and 3 sets of AAA batteries will last as long as you wanna drive.

  • @heute_zzz

    @heute_zzz

    4 жыл бұрын

    Nimh batteries are heavier and less power than lipo. But that is not a problem for Mini-Z, they work great. And I don't think there will be a lipo conversion from Kyosho.

  • @lillagubben2815

    @lillagubben2815

    4 жыл бұрын

    A couple of 10440 lipo batteries + a couple of dummy AAA batteries, and you have your own lipo conversion. It's a slight boost in voltage, but not enough to do much damage...

  • @Max-do7me

    @Max-do7me

    2 жыл бұрын

    The same with me. Like Paul Mccarter I had/have Mini Zs. One of them a Mini Monster with a brushed motor comparable to those employed by the 4x4s. There'd be no upside by running these off LiPos, but a couple of downsides. Just for the book, the energy density of good NiMh accus is similar to that of your average LiPo, you just don't have the same high discharge rate. But the discharge rate of 4 AAA NiMhs is more than sufficient to power this little bug. Also, the weight of 4 AAAs is low enough to be inconsequential. A much heavier burden is the body of the 4x4 as compared to a simple one made of Lexan. The pros of 4 AAA NiMhs are many. They are readily available just about everywhere and will continue to be around. You can use them for many other purposes if you don't use the truck for some time. If just one of the cells goes foul while the others are still good, you just replace it. It's not an ideal solution, but better than throwing away your whole LiPo- pack. A 7.2 LiPo accu consists of 6 cells, and if one of it drops out early the whole pack is useless. The dangers of LiPo's don't need to be mentioned again, I guess. However, my dark grey Toyota 4Runner is on it's way and the 3 sets of 4 AAA NiMh accus, otherwise used to power a Mini Z brushless Big Foot buggy, are at the ready. The "Big Foot" moniker refers to the Mini Z monster's tires on aluminium wheels it came equipped with. Yeah, this setup is stretching the limits of that platform a bit, but it is a lot of fun to try to tame that little bronco.

  • @Max-do7me

    @Max-do7me

    7 ай бұрын

    LiPos have a higher discharge rate, but for the purposes of the Mini Z NiMh batterie are absolutely sufficient and I've never emptied a set of fully charged Eneloops in one session. A conversion to LiPo is extremely desirable for the Mini Z brushless buggy, but makes no sense whatsoever fro this little crawler (own one since 2021, close to two years now).

  • @chrisfigiel9547
    @chrisfigiel95474 жыл бұрын

    What is the purpose of the gyro? It's a great looking office rig, you know for writer's block. That slo mo on the rumble pad was cool.

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    I believe the gyro was transferred over from the other high-performance mini-z models. It was easier to leave the function, than to completely remove it probably. The truck is very cool when you need a desk break ;) -Brett

  • @RCnerd74
    @RCnerd744 жыл бұрын

    Great little crawler. But i miss the lipo solution.

  • @angellotorresg8402
    @angellotorresg84024 жыл бұрын

    Will you make a video of the Jimny sierra?, its so cool too.

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    Probably not. I'm told we are receiving a very small amount of trucks when they are released, so all trucks will go to customers. -Brett

  • @nwhuckin7761
    @nwhuckin77614 жыл бұрын

    considering its a 1rst gen 4runner and I already own 2 full size and 5 1/10 scale I'm not sure how I'm going to get out of purchasing at least one

  • @dakotaanderson1504
    @dakotaanderson15044 жыл бұрын

    Any chance your gonna review the 1/18 scale jimmy by kyosho? Id really love to learn more about it and I'm definitely looking forward to picking one up asap!

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    Probably not unless Kyosho would be kind enough to send us one. I'm told we will be receiving a limited amount of these trucks which we must save for customers, so we cannot use one for videos. -Brett

  • @dakotaanderson1504

    @dakotaanderson1504

    4 жыл бұрын

    Do you know when u guys will have them up on the shelf for sale?. Ether way I'ma get that jimmy lol

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    @@dakotaanderson1504 Early-Mid March Kyosho is saying. -Brett

  • @DavidFernandez-sc5ws
    @DavidFernandez-sc5ws4 жыл бұрын

    Looks cool. But I rather get the scx24

  • @MelbourneExclusive0

    @MelbourneExclusive0

    3 жыл бұрын

    What did u end up getting and why

  • @slick4596
    @slick45964 жыл бұрын

    Other then the great looks at a price at $200 I still think the scx24 beats the comp but I'd probably buy it still hahaha

  • @lillagubben2815
    @lillagubben28154 жыл бұрын

    I've been to the AMain website several times. Chat even said that they would be in later this week. But you can't pre-order. And you can't even set up notice for when they arrive...

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    Sorry about that. I don't think we're adding them for preorder because we are receiving a limited amount, and cannot accept more orders than we are able to deliver on. They'll go live on our site when we receive them, and we'll update this video with the direct links to the trucks. -Brett

  • @user-tz3pg4mv3v
    @user-tz3pg4mv3v3 жыл бұрын

    i wonder what parts are more needed to b added to cart along with the truck

  • @kristamercedes3723
    @kristamercedes37234 жыл бұрын

    Any other upgrades coming for these, tires,rims,bumpers,winches ect.

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    I imagine so, but it's still so new, we haven't heard of anything specific. -Brett

  • @noahclemence4589
    @noahclemence45894 жыл бұрын

    Do you think it would be wise to wire in a 3.7v 500mAh lithium polymer battery just for the convenience of rechargability? and as for the front weight issue I could use a lead weight at 10g.

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    I'm not sure. You'd be losing power with the truck designed to operate on 6V, and you wouldn't have a LiPo cutoff. Its probably risky unless you really stay on top of it. -Brett

  • @jamesn9251
    @jamesn92514 жыл бұрын

    Why don't they do 1/10 crawlers? I have their fazer audi r8, eletric and i like it a lot

  • @crashandcynder
    @crashandcynder2 жыл бұрын

    I've had it where it just stops moving. it has new batteries and it makes a lot of noise but doesnt go anywhere

  • @theirishaxe9405
    @theirishaxe94054 жыл бұрын

    Guys if anyone is looking for aaa rechargeable batteries look at ebl brand they have really high mah batteries it's all i use for my aa and aaa batteries they have 2800mah batteries 4 for nine dollars and the charger can charge 8 batteries at once and only costs ten bucks i love using ebl batteries they last forever. I'm definitely getting this little crawler perfect for indoor now that it's minus 14 degrees here. Also guys you can get lithium aaa batteries 👍👍

  • @R.C.A.D.

    @R.C.A.D.

    4 жыл бұрын

    What is the recharge time on those batteries ?

  • @theirishaxe9405

    @theirishaxe9405

    4 жыл бұрын

    @@R.C.A.D. depends on the mah the biggest ones i have that i use in all my transmitters is the 2800 mah and it's about 35 minutes in sure you can get faster chargers out there but this one Is made for these batteries. So ya probly a little faster for aaa I've never really thought about it i drop them in and come back later. The cool charger charges aaa and aa batteries and it's only like ten bucks

  • @R.C.A.D.

    @R.C.A.D.

    4 жыл бұрын

    @@theirishaxe9405 Hmm! Right on! Much appreciated for the info,I was thinking that it was still like the 80's,with a 24hr charge time,Apparently they have come along way with that technology too! 😕😊 Learn something new everyday! 😀 Thanks Brother! 😎👍👍

  • @theirishaxe9405

    @theirishaxe9405

    4 жыл бұрын

    @@R.C.A.D. hey anytime bud.

  • @R.C.A.D.

    @R.C.A.D.

    4 жыл бұрын

    @@theirishaxe9405 😎👊👊

  • @MxAxRxK
    @MxAxRxK4 жыл бұрын

    Everyone complaining about the batteries... not gonna lie almost rather have rechargeable AAA’s than mess with charging lipo’s.

  • @jonasrc5517

    @jonasrc5517

    4 жыл бұрын

    indeed :)

  • @blueterror2276

    @blueterror2276

    4 жыл бұрын

    Also you can't charge a lipo during a blackout AAA batteries you just keep some extras in stock

  • @graysonelliott397
    @graysonelliott3974 жыл бұрын

    I really was considering one, but the fact it requires AAA batteries kills it for me. Would the ESC hold up to a micro 2s?

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    It's only designed for 6V so probably not. -Brett

  • @jonlaird5082
    @jonlaird50824 жыл бұрын

    Looks really nice but the use of AA batteries is a big turn off. But in my opinion,I rather spend a few bucks more and get the slightly bigger 1/18 rc4wd gelande. But this mini z still looks really really good

  • @mzondi1970
    @mzondi19704 жыл бұрын

    I'm new to the Hobby and new to your website. I just bought a Kyosho. Mp9e from you guys and I was looking at a small crawler. And I know the quality of Kyosho, but why would I buy this over the axial? SC x 24

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    Primarily for the realistic scale body. -Brett

  • @tfell05
    @tfell054 жыл бұрын

    When will amain hobbies have this for sale or listed on the web site

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    We will have them go live on our site when we receive them, and we'll update this video with the direct links to the trucks. -Brett

  • @BlueSharkRides
    @BlueSharkRides4 жыл бұрын

    That body is awesome looking, but the fact it takes AAA's while being $200 is beyond me. The SCX24 looks like a much better buy.

  • @00godlovesus
    @00godlovesus4 жыл бұрын

    I thought I was cute;)

  • @MDXZFR
    @MDXZFR4 жыл бұрын

    Non-Mini-z guys : AAA batteries? Are u kidding me? Bla bla bla Lol. Maybe it's their 1st time heard of Mini-Z. Welcome to the ship bois!

  • @thealmightyquatch
    @thealmightyquatch4 жыл бұрын

    Do you guys know of modding in a LiPo in place of the AAA to bring the CG down?

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    No, and the ESC might not be compatible with that higher LiPo voltage. It's unknown. -Brett

  • @calvinsmith2375
    @calvinsmith23753 жыл бұрын

    Does anyone know if I could take a body off of the jimny version and put it on an scx24?

  • @verryverry7889
    @verryverry78894 жыл бұрын

    Oh it’s now

  • @rx-928
    @rx-9284 жыл бұрын

    トヨタの4RUNNERは魅力があるわ~。!(´▽`)ノ

  • @Isuzu_Paul
    @Isuzu_Paul3 жыл бұрын

    When will we get a defender 110 body?

  • @nlhpr11
    @nlhpr114 жыл бұрын

    Couldn't locate at website for amain?

  • @RBKL777
    @RBKL7774 жыл бұрын

    I just wanna know if there’s gonna be upgrades?

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    Yes, I believe Kyosho will have some upgrades. -Brett

  • @butchdelaware3174
    @butchdelaware31742 жыл бұрын

    Where do u get the light upgrade

  • @joelbastian5741
    @joelbastian57413 жыл бұрын

    Hi guys. I just purchased my first 4x4 mini z And at very slow speeds. It seems to like pulse or stutter. Is this normal? I feel like it messes up my speed control when trying to crawl precisely. Is this a motor issue? Feels like something is too tight causing it to pulse when going forward at very low speeds.

  • @AMain_Hobbies

    @AMain_Hobbies

    3 жыл бұрын

    Congrats on the truck Joel. You can try removing the motor and this will free the drivetrain. Now, give the tires a spin and see how smooth the system rolls; does it feel bound or with much resistance? On the very low end of the transmitter squeeze, we have also experienced stutter as well and we assume it's due to the nature of the electronics used. Here - our "Best Mini Crawler Comparison," at 6:46 we test Mini-Z throttle response against the other trucks: kzread.info/dash/bejne/aoF30ZWdfa6sZpM.html Is your truck behaving like ours? -Brett

  • @joelbastian5741

    @joelbastian5741

    3 жыл бұрын

    @@AMain_Hobbies hi brett! Wow thank you so much for the super helpful response! I actually kept driving it and tried to “work it in” more and it actually seemed to get smoother and smoother as I used it for a few more minutes. It’s noticeably better now. But that’s great to know what I can do to try a fix. Will definitely check out the video. Thanks so much you guys! Amazing.

  • @AMain_Hobbies

    @AMain_Hobbies

    3 жыл бұрын

    @@joelbastian5741 Awesome! Happy to hear it's smoother now! -Brett

  • @ohshititztrapaholik100
    @ohshititztrapaholik1004 жыл бұрын

    I wish i could get it here in australia. The exchange rate is bad from u.s to aus. Id have to pay $400. I dont think ill ever own one. Theyre sold out everywhere 😢

  • @momomotorsports
    @momomotorsports4 жыл бұрын

    When will they be available for pre-order?

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    I don't think we're adding them for preorder because we are receiving a limited amount, and cannot accept more orders than we are able to deliver on. They'll go live on our site when we receive them, and we'll update this video with the direct links to the trucks. -Brett

  • @momomotorsports

    @momomotorsports

    4 жыл бұрын

    @@AMain_Hobbies Thanks

  • @dillonbuttner2114
    @dillonbuttner21144 жыл бұрын

    Huh 130 I wonder how fast she would run with a plasma dash motor

  • @wildmangeorgesrcchannel6916
    @wildmangeorgesrcchannel69164 жыл бұрын

    A gyro? For a 24th scale crawler.......

  • @mudhudgie95
    @mudhudgie954 жыл бұрын

    When can we buy this?

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    AMain Hobbies when it is released. Check out our shop --> www.amainhobbies.com -Brett

  • @bobrudy7314
    @bobrudy73144 жыл бұрын

    Is there any way to convert to a Lipo battery???

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    No. It may be achievable with modification and custom work, but there are no LiPo battery upgrades at this time. -Brett

  • @bobrudy7314

    @bobrudy7314

    4 жыл бұрын

    Thanks😄😄😄!!!!!!

  • @mythicalflame472
    @mythicalflame4724 жыл бұрын

    First because I put on notifications

  • @paulclancy2404

    @paulclancy2404

    4 жыл бұрын

    Lol

  • @kyleduran2583
    @kyleduran25833 жыл бұрын

    It sucks that they're sold out rn

  • @MrBIGWILL209
    @MrBIGWILL2094 жыл бұрын

    Is it "water proof "

  • @AMain_Hobbies

    @AMain_Hobbies

    4 жыл бұрын

    Negative. -Brett

  • @MrBIGWILL209

    @MrBIGWILL209

    4 жыл бұрын

    @@AMain_Hobbies dammit

  • @Joey_l22
    @Joey_l223 жыл бұрын

    How fast is it

  • @AMain_Hobbies

    @AMain_Hobbies

    3 жыл бұрын

    It is not fast, around one or two MPH. -Brett

  • @uggienotreal7249
    @uggienotreal72492 жыл бұрын

    hmm, never broke huh? well i have had 2, not one but TWO of these things and they have both had the little joint right behind the wheel break that just so happens to make it 3 wheel drive and the most they have ever fallen was off a 1 and a half foot couch onto very soft carpen so something tells me that this is no incedent but a flaw with kyosho. Don't get me wrong im still a kyosho fan boy but this little thing irritates me so much i wanted to let people know.

  • @uggienotreal7249

    @uggienotreal7249

    2 жыл бұрын

    carpet*

  • @jlp-mtb1391
    @jlp-mtb13914 жыл бұрын

    I would maybe consider one if it was $100.

  • @fromfin90
    @fromfin904 жыл бұрын

    wonder wat that would do with a one cell lipo, hmmmm

  • @1peanut
    @1peanut4 жыл бұрын

    $200 ? insane. takes AAAs ROTF.

Келесі