@19:02 I wish you stop there for a while to show the difference between two of the tires. It is a very nice video 👌

@SleekRC

2 жыл бұрын

i had to see what you were talking about, that front profile with the OEM tires on one side and the larger ones on the other would make for a good comparison wouldn't it!!! thanks for watching!

Thank you😀 this is exactly what I was looking for👍👍👍

Hey brother love your products awesome parts and easy installation highly recommended 👍 love from Kuwait 🇰🇼

@SleekRC

4 жыл бұрын

Thank you so much!

Nice parts I just lifted my Jimny and got the wheel adaptors with those same wheels. I have the Jeep bumpers on it and they fit the lift parts great. I did a little trim on the bottom corners of the fenders so it just barely rubs. The parts are well worth it, I only tested it for a bit but it does crawl way better.

@SleekRC

2 жыл бұрын

Awesome I just lifted a jeep and put the same wheels and tires on it so much better. Thank you!

Heck yeah!!! Love your videos!!!

@SleekRC

4 жыл бұрын

Thanks! the wife and daughter said i need to redo it because of my extensive use of "um" and "uh" lol i'll try to work on that in the next video

Very inspiring thanks bro 🤩

Can I fit the 4Runner tires on the Jimny with just the lift kit (with no hub extenders)?

@SleekRC

4 жыл бұрын

sorry thought i replied, seems they aren't all going through. you can fit the toyota wheels/tires with the body lift but the body lift raises about 12mm or more so it may look a little out of proportion, you may want to try the suspension blocks that just go under the spring mounts and raise it 2.5mm

my lift kit and hex adapters are on the way... will be here monday/ tuesday... (9/3-4/2020) I do have a question though... how tall are the axial tires? I have a full set of proline wheels and tires from the 1:25 ambush that are 50mm diameter, but I can't find any info on the axial sizes other than rim size.... also your first link is broken

@SleekRC

3 жыл бұрын

Hey thanks for pointing out the broken link! as for the axial tire sizes, I actually don't have those exact tires anymore, someone asked if i would sell them so i did and then they complained about rubbing and demanded refund....go figure....can't make everyone happy so that's the last time i did that ;-) However, since then i've been using the RC4wd Rock Lox tires and love the size, bigger than stock but not too big, they are right around 48mm diameter, the Axial C10 tires i had were definitely larger i'd say in the 55mm range (without having one in front of me to measure). Hope that helps, and can't wait to see your lifted jimny when you get the kit!

@SeamusMacMattain

3 жыл бұрын

@@SleekRC Thanks for the response, yea, my proline flat iron 1.0s are exactly 50mm, should be a nice fit... never pleasing some folks... I'll post up a video or something once I get 'er dun..... lolz

It would be very much appreciated if you could point me to the right source for the tires and adapters :)

@SleekRC

3 жыл бұрын

yes, the adapters i make and you can get either from my ebay store or etsy shop www.etsy.com/shop/3DSleekun the wheels and tires used in the video are the axial c10 wheels and tires, however since the video i've started making my own wheels that do NOT require adapters and take a 1.0 or 1.1 tire like the rc4wd rock lox (my favorites).

Yo bro, already have sone of your parts from eBay for my Jeep, Will this lift kit work on any other model? I want to lift the Jeep wrangler a little higher and put bigger tires

@BrianSwayney

4 ай бұрын

I make a list kit for all the kyosho mini z4x4 trucks, they are specific to each truck but they are in my ebay and etsy ships. The jeep is the most popular lift kit

Do you prefer the Toyota or jimny?

@SleekRC

4 жыл бұрын

I'm probably leaning towards the toyota both out of the box and even after lifting the jimny althought the jimny really is growing on me, i'm working on a kit that allows the Hot RAcing shocks to be put on and even though it limits the flex some they seem to help. i'm going to do some comparison vids soon i think....as time allows.

Hi. Link buy the tires? Please.

@SleekRC

4 жыл бұрын

Hey, sorry i don't sell the wheels or tires, but they are the axial scx24 c10 size, Wheels are part # AXI40000, Tires are Axial part# AXI40001.

Hello do you offer a body kit for the Toyota

@SleekRC

4 жыл бұрын

Hey, actually i don't, i didn't make one because the sides of the toyota don't hide anything and it already has more clearance than the jimny for bigger tires and all. I do make what i call Suspension Blocks that go between the axle and the bottom of the spring, it raises the chassis by about 2.5mm and they fit jimny or toyota.

@bret1961

4 жыл бұрын

sleekun Thanks I will check out your items

Where can I buy those parts?

@SleekRC

4 жыл бұрын

Hi, you can use the ebay link in the description, i have other upgrades as well but the body lift link is ebay.us/4QrDwo?cmpnId=5338273189 thanks!

Bro .. does it fit in the Xiaomi car? Suzuki Jimmy Sierra?

@BrianSwayney

3 жыл бұрын

Hey, i had never heard of the Xiaomi until you mentioned it, looking it up and seeing a picture of the chassis it doesn't look like it would work with the Xiaomi at all. It's very specific to the Kyosho Mini-z 4x4 chassis. thanks for checking though!!!

@viniciusmicheletti9862

3 жыл бұрын

@@BrianSwayney ok Bro..thanks for your attention!!

Mine flips over soooooo easily so what cold help?

@SleekRC

Жыл бұрын

the taller anything gets the easier it flips, wheel offset can help with that, i make extenders for stock wheels or typically the hex adapters for the larger scx24 wheels offer more offset which gives it a wider stance, also some weight in the wheels/tires can help keep it planted.

Does it still rub with body kit if the top is the rubicon?

@SleekRC

2 жыл бұрын

i make a different kit for the rubicon, it goes on in a similar fashion. how much it rubs on any of the trucks entirely depends on the wheels and tires you put on, the larger they are definitely the more rub you get even with the body lift.

@rodey6594

2 жыл бұрын

Gotcha, any ideas the dimension of those SCX 24 tires you used? Like Height and width

@SleekRC

2 жыл бұрын

@@rodey6594 actually i don't have them anymore, the part number for the tires are Axial AXI40001 (assuming that i not l)

@rodey6594

2 жыл бұрын

@@SleekRC i ended up buying the goodyear tire with treal wheels and ordered the lift kit from your etsy

@SleekRC

2 жыл бұрын

@@rodey6594 awesome! Thank u so much! Have fun with the bigger tires and making it over bigger obstacles! 😉

Does this kit work on the Chevy c10 scx24?

@SleekRC

3 жыл бұрын

No, this really only works with the Kyosho mini-z 4x4 Jimny, it is possible to put on the Kyosho Mini-z Toyota and Jeep but it requires flipping the front bumper mount turning around backwards and shaving a little off the bottom of it.......but it's not for any of the SCX24 trucks. I have a body lift for the scx24 Jeep but it's not posted, i never got must interest on it.

@wahlid6129

3 жыл бұрын

@@SleekRC Would you suggest anything else? I’d just love a lift kit for the Chevy c10

@SleekRC

3 жыл бұрын

@@wahlid6129 I don't have a C10 to try my SCX24 body lift on, i have it on a jeep and not sure if they mount the same way or not. i know the deadbolt mounts were different than the jeeps, so not sure how the c10 differs. i might could modify it to fit the c10 if i can find someone who's got one to test with.....i'll let you know if i find one feel free to look me up on facebook @3Dsleekun and message me there

@wahlid6129

3 жыл бұрын

@@SleekRC Cheers!

it comes with the hex and longer screws ?

@SleekRC

4 жыл бұрын

Hey, the body lift just comes with the parts and extra screws for doing the body lift only. The Hex adapter set (sold separately) does come with the longer m2x10 screws needed to put the hex wheels on. hope that helps, thanks!

@thatonebeone

4 жыл бұрын

@@SleekRC thanks will be getting it.. suck amain had the jimny in stock and it was in my cart and then someone took it while i was adding things to my cart lol.. this is the adapter hexs right ? www.ebay.com/itm/Hex-Hub-Adapters-for-Kyosho-Mini-z-4x4-4-runner-Jimny-Temper-Barrage-SCX24-RC4WD/114196239171?hash=item1a96a05343:g:fgwAAOSwaOpe44X8 ill be using that same wheel and tire set up like yours

@BrianSwayney

4 жыл бұрын

@@thatonebeone yes thats the hex adapters, also I know a couple of mynlocal hobby shops had the jimny in stock, bright green and dark green, not sure if they still do. They'll ship to anyone in the US, RC Hobby in Fuquay Varina NC, or RC Hobby Nook in Smithfield NC, feel free to hit up either one of them to see if they still have them. They may have the wheels/tires as well.

@thatonebeone

4 жыл бұрын

@@SleekRC does the other wheel from the Toyota one fit right in the jimny ? No adapter or anything just stock.. im assmuing they are the same ? Kinda want to get that wheels and put it on the jimny without a lift kit because I'm getting 2.. one lifted like yours and one stock looking but with that other wheel from the toyota

@thatonebeone

4 жыл бұрын

@@BrianSwayney colors don't matter as im getting a white body to paint one.. thanks

I thought this was a real one 🤣

@SleekRC

2 жыл бұрын

Lol, that's good stuff right there!

Stl please 🙏

@SleekRC

3 жыл бұрын

for now all my designs are available for purchase on my ebay and etsy shops. i have in the past provided stls for home printing but many of my designs are now being sold by those i provided them to without my permission as their own. so for now they are available ebay and etsy. thank you

Bro can you give me stl file? i can not buy in my country :(

@SleekRC

2 жыл бұрын

What country?

@herobadminton6404

2 жыл бұрын

@@SleekRC Vietnam, but so far city :(

@SleekRC

2 жыл бұрын

@@herobadminton6404 i'm pretty sure i can ship to vietnam, there may be import fees on your end but i'm not aware of anything stopping me from shipping to you. as for the STL files i've had extremely bad experience in the past with providing/selling stl files so i stopped doing that a while back for anything i carry in my online shops, sorry.