I purchased new hepa filters on Amazon, but could not find a video describing how to replace the filter until I came across yours. Thank you so much!

Finally a video on how to replace the hepa filter. I've looked everywhere

@vugami8063

2 жыл бұрын

I couldn't find one either. I had to figure it out myself and made the video for the rest of you :-)

Thank you! I was wondering why I couldn’t get the old one off

Thank you! I was looking for a video to help me remove this filter.

Was looking for this video! Wasn't sure if I needed a metal filter replacement or if I needed to buy the whole head piece. Good to know I don't

Thank you. I would have broken mine without your helpful instructions.

I have no need for this filter, but this dude is the best thing to happen to my anxiety since Bob Ross. Soooo calming. @Vugami, this has been helpful to me in more ways than you know.

Thank you so much!

I wasted an hour on tineco site. This was all they needed to have. How stupid that site is. Thx for this

THANK YOU❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥. I was so lost

Thank you , your video is very helpful 😊

Are the replacement filters (non metal) washable like the original metal one it comes with?

Thanks for the video. Do I really have to fix the screw?

Thanks you trop France 😊

Thank you. The Phillips screw wasn’t obvious to me. Is the original filter (with the metal mesh) reusable after cleaning? BTW, I’ve had my Tineco for about 3 years and its been fantastic. I’ve been washing the other filter regularly. But finally, I received a filter replacement kit.

@vugami8063

2 жыл бұрын

The Tineco web site says that it can be washed but must be dried completely: "Instruction Manual - Tineco The HEPA can be washed under running water if necessary, and should be dried completely before reinstalling. After the cleaning , install the brush roller back."

thanks buddy

love this vacuum but the filters just clog so fast... thanks for the video. our filter was so full of lint that we didn't even see the screw

Not clear what size Phillips screwdriver is required. #1 and small diameter shaft?

Good

Why doesn't the replacement have the metal cover

@vugami8063

4 ай бұрын

Because the manufacturer decided that they no longer need the metal cover so all new filters are just paper

Does it have to be this Phillips screwdriver? If so, can you post an Amazon link, please?

@vugami8063

2 жыл бұрын

You can use any Phillips screwdriver that'll fit

@donrobinson9669

Жыл бұрын

@@vugami8063 No kidding.

So the metal cover isn't necessary? Seems weird!

@vugami8063

8 ай бұрын

The metal cover was on the older filters. The newer filters does not come with the metal cover

It's frustrating that you instruct us to replace the HEPA filter every three months, however, you don't see it individually. Only as a kit with the other pre-filters. I already have two, I maintain them properly, and they don't need replacing. Only need the HEPA Filter. This seems like a money-grab from your company and I'm disappointed.