Should call a bed cover company and tell them you have the 12foot bed tandem axle.

Dang, that’s such a bizarre 6x6 conversion on. Everything’s stock on it. I kinda respect that will to do so much work to just any vehicle.

something about this truck that triggers me lol Fact that one of the diff just free wheels

@dazzleyd

2 жыл бұрын

Would be better if it was all wheel drive and rear stear would help with tyre scrubbing

@adamfrbs9259

2 жыл бұрын

Kinda like raising a 2wd or lowering a 4wd...sure ya can do it...but it's just wrong...get that 2nd axle working too.

@Guillotines_For_Globalists

2 жыл бұрын

It wouldn't work. Only way to have 2 powered axles is to have a pass through differential with 2 pinions, 1 on each end. Good luck with the cost!

@adamfrbs9259

2 жыл бұрын

@@Guillotines_For_Globalists AMG 6x6 G wagon does it. Hennessey Velociraptor claims 6x6 drive as well and it's as an upgrade to 2017 to 2020 trucks. So find the vendor making the diffs and order their diff.

@Guillotines_For_Globalists

2 жыл бұрын

@@adamfrbs9259 Just buy it man, it may cost 20 times the value of the truck but just buy it!

Nice job. That would have been a two day job for me. You’re a real trooper getting that all done in one day!

The brittle plastic looks like the insulation/sound deadening material the encapsulates a sort of closed cell foam on some of the Ford intakes. Not all of the motors had them but some did, in my experience with the 4.6 at least.

Man that thing is a beauty. Same goes to the 7.3!

Who knew, cylinder heads can be changed out in less than 16 minutes. 👍

@unmountablebootvolume

2 жыл бұрын

Lawn mower cylinder heads can be changed in 2 minutes!

@tylerf6528

2 жыл бұрын

@@unmountablebootvolume I changed mine out in 45 seconds

Wow after that many miles that still a really good engine! It’s probably not original to the truck but still really good! It would be a shame to destroy this truck now. It must live on.

@wysmn

2 жыл бұрын

5.4 triton engines suck. The 4.6 lasts ALOT longer and doesn’t turn your spark plugs into missiles

@ow741

2 жыл бұрын

@@wysmn Do you have any prior experience with them?

@fsb_-bf3th

2 жыл бұрын

He means the 5.4 3v. Not the 2v. This guy has no clue

@desertvalleyfilms9136

2 жыл бұрын

@@ow741 the 5.4 2v is a great motor i have the identical white f150 xlt except mine is an 03 and had 225k miles runs like brand new

@hendo337

2 жыл бұрын

@@wysmn I've seen a '99 F150 5.4L 2V that was a trade in at a dealer with over 400,000 miles, it wasn't a perfect runner but, it still had some guts, enough to light the tire from a stop. It was a rusted out hunk of garbage in way upstate NY or I would have bought it for a thousand bucks just to beat on in the back fields. I couldn't believe how well it ran and I checked the numbers on the block, it was the correct year and date to have been original to the truck if had been swapped it was done scientifically.

That thing ps so frigging cool! Nice work guys.

Awesome video keep up the good work, You said pleasantly surprised with how it went for the most part. I said the same thing this weekend when pulling the bed off of my 202 K mike 2005 chevy 2500. When all the bed bolts came out smoothly lol. Pulling the bed off to repaint the frame and do the fuel pump while I'm at it.

Amazing work!

You got my like, subscribe and comment because you have an actual evac system for your ac lol, also I’ve been watching you since you bought the truck, thumbs up for bringing it back to live better then ever!

I love the Ford 4.6L between 98 and 03 in my opinion are the most reliable motors made by man. Really any Ford truck in said years is a real work of motor craftsmanship.

I like the C-Max Hybrid Plugin in the garage!

The stretch limo version of an F150. Love it!

Great truck 👌🤠

Nice project! I’d also shine up the front headlamps as well.

I saw this(or similar custom) in Carbondale, IL a few years ago for several months. Just had to shake my head every time I saw it.

Can’t wait to see more

That is a "cool" idea using the heater bypass valve instead of all the work replacing the blend door. Their was a local F150 Super Cab from the late '90's (same body style as yours) with the 4.6L that had 999,999 kms and got recognition from Ford of Canada for the high mileage. Our local dealer had a big display about it. (I forget what they said the scan tool claimed the mileage was past that) At that mileage, the body was just staring to show signs of rust. Had a photo of it somewhere. Have fun with the truck!

Looking good

I’m feelin some zip ties and bias plies vibes here

i wonder if you can get it all 3 axels to work and balince the out waght on them too and some new after markit lights allaround

That would look even better with a little wheel spacing bringing it out even with the fenders

i do 5.4 manifolds weekly. studs are easy to remove with a welder, some washers and nuts

@Rockymountainklx

2 жыл бұрын

That’s a lie! EASY MY FUCKING ASS!! Lol

@tihspidtherekciltilc5469

2 жыл бұрын

@@Rockymountainklx I was going to point your comment out as they're a freaking nightmare.

@Rockymountainklx

2 жыл бұрын

@@tihspidtherekciltilc5469 well considering I just broke an extractor inside the fucking head YES ITS A NIGHTMARE INDEED. about to put a new head on there now

@stoverboyz9254

2 жыл бұрын

There's a real simple trick..I'm willing to share the knowledge and in 5 minutes they'll all be out..even broke off flush with the head ones. Bust out the trusty Flux core gasless welder. Weld a fairly large glob right on top of the broken stud( it won't weld to the aluminum head.) Then take out your vice grips and clamp them to the glob and unscrew the glob along with the broken stud. The heat welding generates makes them come out like 🧈. Hasn't failed me yet .

Anymore cool stuff on the 6x6

You're doing good my friend the new tires look good did you think about making both rear axles working

@hendo337

2 жыл бұрын

He would have to get an axle with a pinion output like a Rockwell 2.5-5ton axle, there might be some type of smaller, lighter axle in an agricultural or industrial application with an output that allows a second axle or a PTO. The back axle could be the stock axle that's on there or a Stirling 10.25/10.5 from an F250LD, F250, F250HD, F350 or A Super Duty from the mid 80s to present.

Sounds like you had a beer or two before hitting the record button. That should be a requirement before working on any part of this abomination of a truck hahaha

@DanielJaegerFilms

2 жыл бұрын

I can't confirm whether or not a beer or two was had lol

@kevinjohnson9372

2 жыл бұрын

@@DanielJaegerFilms joint?

@tihspidtherekciltilc5469

2 жыл бұрын

Step 2 is beer. Always.

@edwardmyers1746

2 жыл бұрын

@@DanielJaegerFilms 😂

@capri8225

2 жыл бұрын

Cocaine

I'm surprised you didn't replace the water pump or was that done already???

Neighbors must love it lol

This truck isnt done you still need to fix backlighting on the insturment cluster?

Those rear tyres will last about a week 😃

Holy shit i was wandering what happened to the ole lads limo

What over head light is that clipped to the hood?

You should make a video about your ford excursion again

Put a 4 link air ride on each axle. Then have all the lines share the same air Then your rear axle will distribute the weight equally to each axle. Much like a tandem leaf spring trailer. The equalizers distribute the same weight to each axle no matter what

You still have this truck Daniel Jager

This guy uses oof sounds and says yeet, I find that interesting.

Do you know who can convert a pickup truck to a tandem axle truck?

Nice👍🇺🇸

Was this factory? I bet the tires wear funny from turning

Is the 4wd working on this truck? I feel even a slight incline where the middle lifts and you're screwed without it.

@_RiseAgainst

2 жыл бұрын

Exactly what I was thinking. The back may be soft enough for it to not matter much.

How hard is it to make that rear axle work?

@dancearoundtheworld5360

2 жыл бұрын

Not but some people would never do it right.

Doesn’t 25 psi seem low for truck tires? My old 97 Ford is at 35 psi on all 4s

@tjsmith9449

2 жыл бұрын

Usually for trucks doing heavy loads Im asked to put 65 at least in the rear, does seem low to me

@potatopie1696

2 жыл бұрын

@@tjsmith9449 Uhh... What? the tires on my 2012 F150 specify 44 PSI max... Recommended 40 for gas mileage, I run them at 34 for ride smoothness.

You forgot to send it all the way into the ketchup

That bad boy needs a deep cleaning, ocd panic engaged. Shame there isn't a way to make it a twin screw in the rear. A swap to a 5.4 4v (possibly with a blower), a strong 351w or stroker, 6.2L Boss, 5L Coyote or 7.3L Godzilla would be sick. My dream scenario would be to make it a long travel suspension, dual rear axle drive and no front wheel drive at all. Strengthen it up and have a mean "Pre-runner" that still has a functional bed and is reasonably practical for the street. I'm sure you're not going to take things even remotely that far. I still wouldn't waste money on a 2v when the junkyard has so many better treasures available.

I feel like the length of the bed didn’t change when they put the tandem in it Goddamn those beds are long when they are stock

Do you still have this truck Daniel Jager?

Do you still have the Truck?

Dude! You should put a 10.1 inch Android head unit in, because why not?!?

What’s the music around 10:30?

New heads on 200k mile engine? How long will the lower end last.

@robertheinkel6225

2 жыл бұрын

My brothers F-150 only has 490,000 miles on it, with no engine overhaul. It is a daily driver delivery vehicle. The Tranny was replaced at 100,000 miles, when he bought the truck.

@samholdsworth420

2 жыл бұрын

Depends on maintenance. The 4.6 can hit 300k no prob

You don’t need to worry about tire pressure

Holly crap the carbon on some of those cylinders look awful but the Coolant Cylinders look really clean

OMG I FORGOT ABOUT THIS

@FOWBOWZ

2 жыл бұрын

Lmfao same. Feels good to see it moving

How long is the bed?

@DanielJaegerFilms

2 жыл бұрын

10 feet

@StraightLineCycles

2 жыл бұрын

@@DanielJaegerFilms i need this to take the Diecycle to Bonneville, its 8.5ft long.

sounds like my old mustang

Can’t believe you brought that clown back who helped with the other f150 😀

Fuckin mint

time to change out the rear suspension

I run about 42 psi on my F150 tires.

@DocDewey

2 жыл бұрын

I generally run 70 in my f150 tires

@sloanv2610

2 жыл бұрын

@@DocDewey i used to do 70 too but I like the ride quality of 85 more

if you have question how to convert 4 wheels to 6 wheels, you all can preference from Parkistanian truck channel! :D

2:48 and your third brake light is out as well

So cool thing about this truck is that I was owned at one point by a guy in my town right across the river from you in Waterloo Illinois I have a vid of it you would like to contact me I can give you the vid

Put a lightning front Ed on it

I wish actually doing the job was as quick and easy as the video makes it seem

Ah. Hmmm. 🤔 Why?

Please procharge it I have an 01 with a 4.6 all I was t to see is one of these with a pro charger and your truck would stupidly awesome with it

Literally doing the exhaust manifold job on my 2001 f150 with the 5.4l it’s going ruff with 3 broken studs in my head. I’ve tried the welding trick with zero luck. Next I’m on to drilling and extracting the studs in theory. This job is absolutely miserable! If I fuck up good enough I’ll be buying a new head too. Yikes 👎🏻

I’m surprised it runs so well with that massive vacuum leak having no oil cap.

@conner5611

2 жыл бұрын

How does having no oil cap affect vacuum

@kevin9c1

2 жыл бұрын

@@conner5611 It disrupts the PCV flow and you get unmetered air (past the MAF).

@conner5611

2 жыл бұрын

@@kevin9c1 huh I never knew that well I guess I learned something new

@guitargod66

2 жыл бұрын

@@kevin9c1 how’s that work? I don’t see how an oil cap has anything to do with that but I’ll definitely admit that I don’t know everything

@kevin9c1

2 жыл бұрын

@@guitargod66 Engine vacuum is used to put a slight vacuum on the sump (usually via the valve covers). The engine ultimately consumes the air and burns any oil mist it captures. The air has to come from somewhere. It comes from filtered and metered air before the throttle body. It's part of the mass airflow into the engine even though it doesn't get into the intake manifold via the throttle body. That's why it would be a vacuum leak if you open the oil cap.

now we got f-150 sloppy edition! similar to chevy 1500 sloppy edition

9:58 in order to fix the engine, first you must *become* the engine....

But why?

I'm still wondering if this thing is even street legal

@conner5611

2 жыл бұрын

@Scotty secretly loves Chryslers I love your username 🤣

@tihspidtherekciltilc5469

2 жыл бұрын

It's street legal and a half.

This truck looks like someone was taking a pano and the truck started moving

He's leaving it open for towing hybrid. I mean it can work maybe not worth the R&D but some people are jus throwing money away so why not.

Lift it

What's it legal for? About53 54 thousand pounds

The 2 valve wasn't the best but how did Ford manage to make it worse with the later iterations 😂

Were the heads $300 a pair or each? By the time you count your labor and all the gaskets, fastners, ect. It makes no sense at all to waste a moment of your time on a weak sauce 5.4 2V, especially a non PI version...why not just grab a 6.2L out of a wrecked Super Duty or a 5L Coyote from a wrecked F150 with the 6sp auto, the ecu the harness and have something serious in that bad boy? Even a late 351w roller cam engine converted to Maf with some GT40/GT40P or cheap aluminum heads an aftermarket intake an OBD 2 comapatible or aftermarket equ like holley makes a lot more sense than mucking with one of those gutless wonders.

I dont know how to feel about this

Hi Do you need some great lighting upgrade for your truck to help you better driving, off-road and adventure.We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!

The mans neighborhood probably loves him😂

@idragonauz5436

2 жыл бұрын

I would, this truck is sick

I mean its a dually, aint it? right formula, wrong answer

missouri stand up...

what an abomination to humanity. i dig it

Why ? I don’t understand this

Take it off-road

0 to 60 time? then S U P E R C H A R G E

I'd rather just wear a sighn that say, my wife and I hate each other. It would save money and jokes from the paper boy. My mom said you got it to make up for somthing!

cursed_truck

You describe all the work you've done on it and still haven't learned to leave ford's alone. I had one Ford in my life, a 1956 with a 296 V8 and it kept me broke. One Ford for me is three too many and I have hated them ever since. Found On Road Dead.

Please wash the engine bay, the exterior and of course clean the interior men.. that’s gonna give this truck the extra touch

imagine this thing as a donk, with atleast 26 inch wheels on it.

@XxmatixX6videosdiariosdenadav

2 жыл бұрын

No

@ClassicJunk88

2 жыл бұрын

@@XxmatixX6videosdiariosdenadav I know right? i'm always the bad influence. This thing could start a double axle trend. Imagine a 2018 challenger with two axles.

@mikenonameneeded3485

2 жыл бұрын

Maybe some Nesquik or McDonald’s logos on the rockers? Lol

Bastard brand head bolts, guaranteed never to come out not even when you want them to

Hey my friend i wanna ask about miss the 98 Silverado in the channel

@DanielJaegerFilms

2 жыл бұрын

That truck was donated to a good home when my dad retired and liquidated his business :(

It's a shame that you didn't go one step further and put in a Cummins 4bt...

@FishFind3000

2 жыл бұрын

Why 4bt and not a 6bt

@rnreajr9184

2 жыл бұрын

@@FishFind3000 so that it would be properly under- powered!

What a monstrosity

Rear wheel spacing is wrong -_-

So it's still a 4x4. The last axle is a waste of space and weight.