Thank you so much to everyone for the amazing feedback on this video. I've been blown away by how much everyone is enjoying this new build series! I always try to respond to everyone's questions in these comments sections and I'd just like to remind everybody to turn on the video subtitles as a lot of the time these will answer your questions! Thank you! A quick reminder to hopefully address some common questions I've been getting: - These fenders are only intended to be used as plugs for mould making, the final fenders fitted to this car will be made entirely out of fiberglass. This is why I didn't weld the panel fully and why I have been adding so much reinforcement to the inside to keep the shape solid. Not to mention the body filler that is over 10mm thick in some spots. I may be rough but I'm not that rough haha. - Both the front and rear of this car will be fitted with over fenders. This is because the GTR front is significantly wider than the Stagea and so the rear must be widened to match. A bolt on widebody is the cheapest and easiest way to do that and so I opted for that method for anybody interested in buying this kit once it is available for sale. - I specialize in composite bodywork and so with a lot of my builds you will see me focus on just the exterior of my vehicles. To be honest, this is just what I prefer doing. There are some amazing channels here on KZread that do builds that I could never even hope to hold a candle to. But what I enjoy the most about working on cars is the design aspect. I want to get my hands on as many different vehicles as possible and if I were to do full builds on all of them each build would take well over a year to complete. I have many many more builds planned for this channel on a wide range of different styles, I hope you will all stick around! Thank you all again so much for being the most awesome subscribers I could have asked for.

@shaneomacgardner4034

Жыл бұрын

I love what you do and your philosophy around what you enjoy is really insightful. I think it's awesome you can turn out the work that you do and have variety by focussing on what's important to you. I was really inspired by the Miata build (I'm now building a hardtop for my Vitara 😅) and look forward to seeing more of the Sta-GTR. Keep it coming, you're an inspiration 👍

@enithing7

Жыл бұрын

切ったり貼ったりがワイルドなのに、仕上がりがめっちゃ綺麗なのが好きwww

If your episode's would be 2 hours, I still would sit and relax and enjoy it's full length.. can't wait for the next one.

@devonmartinbasson

Жыл бұрын

100%

i think most people will agree with me in saying... we need longer videos! I could watch you go through these processes for hours

@MrFUNDIS

Жыл бұрын

same here,satisfying and much learning process!

@P0ormansHolden

Жыл бұрын

GIVE US LONGER VIDEOS PLEASE

@BROKENHEARTDESIDUDERJ

Жыл бұрын

Yes I m agreed 💯 likely u Said for. . Firstly BRO if i said simply Way for his WORK'S I m LOVIN'IT 👍🏻 & Biggest fan from Pakistan. . And another thing is THAT'S I WANNABE SAID FOR HIM SPECIALLY SO FOR MA SIDE ლ⁠(⁠^⁠o⁠^⁠ლ⁠) I SAID HIM AS ✌️ MASTER LIKELY MEANT TO SAID ( GURU ) BCUZ HE IX ALWAYS DOIN 😯 WORKED VERY WE'LL AND LIKELY HE IS TEACHING US FREE 🆓 OF COST😍 WHAT'SEVER HE 👍🏻 ✅ DONE REALLY 💯 AWSAAMMM 🙂 🤞 EVER (⁠｡⁠◕⁠‿⁠◕⁠｡⁠)⁠➜THANKFUL TOO YOU GURU . I AM VERY SORRY FOR MA ENGLISH I KNOWS IT'S WASN' VERY 😞 BAD SPECIALLY AT WROTEN TYM'S MAYBE U GOTCHA JUST TRYIN (⁠☞⁠^⁠o⁠^⁠)⁠ ⁠☞HOPE SO U GOTCHA WHAT I MEANT TO SAID PEACE OUT 👍🏻 ☜⁠ ⁠(⁠↼⁠_⁠↼⁠) REGARDS

Can't wait to see your plans for the back half of the car

@jaceNZ75

Жыл бұрын

Mericals Can Happen🤣Although I have seen one with a "double duck bill" spoiler that look kinda cool🤔

I like this guy as a youtuber and make me enjoying his content, not to much talking like other youtuber and just stay on what his working.

@LobbyDaLobster

Жыл бұрын

Plus no sponsor ads from raid shadow legends, nord VPN, or manscaped!

@TofuAutoWorks

Жыл бұрын

@@LobbyDaLobster They've been trying haha. I find it funny how many companies reach out to me asking me to advertise their product when clearly they havent watched a single video on this channel and don't know that I don't speak.

Personally, I don't care about the subtitles, I just like to watch the work.

@plageran

Жыл бұрын

same

@TofuAutoWorks

Жыл бұрын

Cheers bud. I always try and answer all the questions I get in the comments, but a lot of the time it's just repeating stuff I've already gone over in the subs. I'm trying to make sure people realize that there are in fact subtitles on these videos haha.

@michaelbradley7529

Жыл бұрын

@@TofuAutoWorks I get it. But thanks to your editing style, I'm perfectly content to just watch along as you visually demonstrate all the steps you are going thru.

@TofuAutoWorks

Жыл бұрын

@@michaelbradley7529 I'm glad to hear it! That's exactly what I'm aiming for. Thanks for watching bro 🤙

@plageran

Жыл бұрын

@@TofuAutoWorks keep up the amazing work your doing, can't wait for the next one :D

i love the little ''Worlds fastest indian'' reference above your shelf😃

Absolutely fantastic work bro... I was thinking of not doing a wide body to my 87 Celica GtFour but you have inspired me to bite the bullet and do it

Gonna be sweet. Saw another cool wagon build 2001 M3, Think it's the E46. Same idea as the fenders, rear arches, mirrors and back bumper had to be modified. Very OEM+ styling with M3 engine and manual trans. So clean. Who doesn't love a clean wagon with some guts to roast the tires.

I'm really enjoying the fact that you're doing this to a wagon!

I think the hard work you do is amazing, but your real talent is envisioning how the car should look.

In the immortal words of Jimmy DiResta "If it looks straight, it is straight". And hey, you can always be a quality body man 😹

動画まってたぞブラザー！次も楽しみにしとるぞ

I actually saw one of these for the first time ever today in the UK !

I have so much respect for body work guys such as yourself. I throughly enjoy your style of video/editing you have chosen very therapeutic to watch you you do body work 🤙🏽

It's not a car it's a rolling piece of art

I want one of those patented sanding blocks with a signature please, so I can resell it in 20 years when you are famous :D

When I work on my car I’m constantly listening to an audiobook, music, something. Yet, I could watch hours of your videos, perfectly content with the ambient sounds of the environment. Life it strange.

You've only gone and done it again you madlad.

Extraordinary work, mate. Exceptional.

Hello from Russia! Your projects are incredibly cool! I wish you strength and success!

@_elChapo

Жыл бұрын

согласен полностью, вопрос только сколько эти крылья весить будут...столько стеклопластика плюс шпакля, да и сами они алюминиевые

@WuziWu

Жыл бұрын

@@_elChapo тоже согласен, но думаю здесь речь в первую очередь идёт об эстетике и в целом внешнем виде, а тех. характеристики уходят на второй план

@Oixmq

Жыл бұрын

@@_elChapo If I'm right, that fender is for mold. If he make mold with that fender, then he will remake whole fender with fiber.

@_elChapo

Жыл бұрын

@@Oixmq That's exactly what I mean, if he does that, it's the best solution, otherwise the wings will just weigh unrealistically much...

Love seeing the dogs in the shop

Awesome work. Still watching but always look forward to the next video.

There's not a single channel I look forward to uploads more than yours, YT did me dirty. 22 hours? come on now :( Keep up the great work!

Accidentally stumbled upon this channel and I couldn't be happier. Really enjoying your process. Keep it up mate! 🍻

Curious at first but can't wait to see what's next.

Really wish you could post maybe twice a week :)

@TofuAutoWorks

Жыл бұрын

I wish I could too but each video takes over a week of work and several days to edit. I'm barely able to put these up twice a month.

gotta love watching this in class amazing work as always!

@TofuAutoWorks

Жыл бұрын

Appreciate the support! Just make sure not to fail any of those classes.

So cool to watch how you work mann 👍👍 you have patients with your jobs #watching from suriname 🇸🇷🇸🇷

Speaking as a baker; I wish I could just sand down the icing to smooth it out! Great build, love the process!

Такое внимание к мелочам поражает. Отличная работа! Жду финал этого проекта) 🤝

Love the fact so many people have such low expectations given the dodgy KZread builds that are out they can't believe that some one is looking at doing it properly.

i cant imagine building one of these fenders once let alone twice

お疲れ様です！ 今日も最高な動画ありがとう！

my bless from Spain amazing job!! keep it up!

I really hope you get molds made of those fenders in case they're ever damaged. You've put so much work into them!

This is wonderful asmr content for an expat former boatbuilder jdm petrolhead like myself! Keep up the good work😉

すげぇ技術や

Always learn stuff when watching you work. Looking forward to seeing this take shape!

sandpaper Scraatch sound with Chillin music........dude u know how to enjoy Life. A Good project Indeed, lookin forward for the end result.

These videos are so satisfying to watch :)

Great work as always dude! 😉

Really nice job glued to your channel now. 👌

Huge progres!👏 Really enjoying this build👍

🇳🇴 great work. I like the way you show that it is just not a simple task to make custom fenders,i guess we do all forget about how much work is put into å build. Looks so easy and quick on a video

Love the content dude. Just wish it was more regular!! 🤪😎

I love watching your process! You use such interesting techniques. So glad to see a new vid!

Another fantastic video!

Love the videos, very relaxing to watch and and a great way to unwind

It’s awesome to see you put 2 fenders together!!! Can’t wait to see the end results!!! Keep it up brotha 🤙🏽🤙🏽🤙🏽

Fabulous job! Keep going!

your YT career will be just fine!

Coming along nicely

Stumbled across this and couldn’t stop watching. Nice work looking forward to the next video and I really dig the wagon get idea never even crossed my mind and seeing the rendering so far it’s looking spot on great job so far u got my sub

Мужик ты очень хорош. Жду продолжения! И да кстати, я верю что, ты сделаешь расширение на задних арках.

Nice work dude! Coming along nicely

I must be weird or something but this is very therapeutic.

Interesting sanding block 😂 should definitely look into getting a set of dura-blocks you won’t regret them 👌🏻

@TofuAutoWorks

Жыл бұрын

When this one wears out I'll upgrade, but as long as it's still flat it works fine for me. 😆

Keep it up, man! Always entertaining! 🤘

@TofuAutoWorks

Жыл бұрын

Cheers mate!

Impressive work!

Amazing work!! 😍

Really really impressive 🤩👍

Good stuff my man...

Omg this guy is building my dream car .

I'd love to know how you know all this stuff. I can tinker, upgrade and fix. But, what you do is art.

@TofuAutoWorks

Жыл бұрын

All just time and effort. I still make plenty of mistakes but you get better at spotting and fixing them the more you do.

Nice project. following from Brazil👍🏻

Yes Finally new episode... Love your Video bud Salam from Indonesia 🇲🇨

Dude handles the grinder like a handle a pencil. wow

Awesome! Keep up the good work!

Awesome great work ethic ✌🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿

You should really look into getting a finger file sander, incredible for getting in tight places for body work. Keep up the great progress!

Cool work bro 👍

Your ability to edit out all the swearing and anger is masterful.

I'm looking forward to the sequel

So nice!

I love these videos you do some awesome work bud

Excelente trabajo 👍

Amazing chanel, good job man !

I am really entertained and motivated to do similar things by your work, and I do think that u could definitely keep it going without the subtitles but they do help a little bit if it's is something that is not fully understandable from the video itself... anyways, keep it going and congrats for the hard work and creativity

This is what I call amazing.

Hell yeah! I would love to do the same to my NM35.

This is going to look awesome when done, I take it that these parts with the fenders is the most time consuming part of this build. I'm really thinking about doing a conversion on my 99 outback wagon to a bug eye wrx STI , if I can get the engine and transmission I want to drop in it.

Yeah another update!😁

While you are at it, make some molds for those! Stagea owners are willing to buy those in glass fiber or carbon.

Man, i can imagine the pain of damaging those fenders after completion 😀. if i was you , i would make a mold of this ones, just in case.

Bro absolutely love your content

@TofuAutoWorks

Жыл бұрын

You guys are the best!

this is art

Just good jobs man 👍

@TofuAutoWorks

Жыл бұрын

Thanks 👍

There is one tool you really need and its vacuumcleaner. Pneumatic air just move dust all over your shop.

did the right thing by fixing it in place while that resin dry, because it srhinks!!

Hopely u can reveal the result in this video to, and maybe review some detail about your work to that panel will make your video is more nice n informative

Good job 💯 gread, I like to see your content nice2. 💯 😊 👍

So so so so cool

Bog, sand, repeat. Ad infinitum. Looking good though, can't wait to see these "fenders" in carbon...

fantastic

Wait, must grab my important popcorn real quick

Typical bloody nz weather always raining 🤣🤣🤣

@TofuAutoWorks

Жыл бұрын

Yup. Either scorching hot, or raining. Usually both.

Keep it up ‼️　tofu 😉👍✨

id like to see a series one stagea with a r33 gtr front end...

Fire content