DIY Front Bumper Spoiler: kzread.info/dash/bejne/eHitztF6ppayf5s.html DIY Plexiglass Underglow: kzread.info/dash/bejne/mYqMldmScsyThco.html

@g0d182

4 ай бұрын

Cool Where'd the foam end up?

@JasmineSantos1997

3 ай бұрын

You are a genius

"Results aren't perfect" Proceeds to show an amazing, homemade, professional grade rear diffuser. This is solid work! Thanks for the tutorial and the idea!

@klab3929

Жыл бұрын

"professional grade rear diffuser"? far from but its nice for a homemade one.

@joeltorres3202

9 ай бұрын

​@klab3929 what it needs to be a professional grade?

@sb3nder

8 ай бұрын

​@@joeltorres3202 it needs to work.

@izci7489

3 ай бұрын

​@@joeltorres3202looks good but doesn't function like a real aerodynamic diffuser.

I saw the spray foam and I was like "nah" then I saw the fiberglass and I was thinking okay, then I wondered how it was a diffuser without the fins, then you brought it all together with the plexiglass and I was convinced. This is fantastic! Super great job

@ViKO35G

Жыл бұрын

😄 Thanks!

@venkateshbhat9890

5 ай бұрын

You got the perfect teaching for never judge too quickly bro

If that ain't perfect, it's living right next door to it. That came out really good man.

"Results aren't perfect, first time doing anything like this" правиш си несправедливост, изглежда страхотно!! продължавайте в същия дух, тъй като практиката прави перфектни 10/10

Right On! Used similar methods to make a custom pop top camper. Great to see other homemade builds doing the same DIY approach.

I've never made body kit stuff before and have been playing around with a similar idea, having experience with fiberglass. Just seeing that someone else has done it now I'm probably gonna try lol

@TheDerekkraft

Ай бұрын

Same, i Will start with the plastic part of the bumper of my Fiesta mk1 1983 car, as It was plastic and metal, the plastic One are rare asf for the front, so i Will make mine 😅😅

Great video - really like the tip on using expanding foam. Much faster than carving two sides of a block and lots cheaper! Thanks for the inspiration.

@ViKO35G

Жыл бұрын

Glad it was helpful!

That's one of the best job I have ever seen on KZread thanks for sharing

A fine example of talent over technique. I can follow his technique, but I dont have his talent.

If this is your first time, imagine the results next time!!! Awesome.

Definitely awesome man! I've been doing these types of things for many years now! You did great work for your first time! I'll be building a custom widebody kit very soon on my channel! Definitely some great inspiration with the plexiglass/acrylic sheets!

@ViKO35G

Жыл бұрын

Yeah it's easier than making them with fiberglass 😀

It looks real good to not be perfect. You put a lot of atteniton to detail on it to make it nice!!! Good work.

@ViKO35G

Ай бұрын

Thank you very much!

@damonrice8469

Ай бұрын

@@ViKO35G No problm.. Its easy to say bad comments ,but it good to give credit and thumbs up on a job welldone. Keep up the mods.

That looks better than some vacuumed formed diffusers you can actually buy. top work...

Lots of hard work, great job! I respect the length you’ll go to keep the stock bumper cover.

That's solid work my friend!!

Excellent work! Thanks for showing the whole process! You got me itching to get into some fiberglass now 😂.

@jacobpavone3477

9 ай бұрын

fiberglass will definitely get you itching

@3Wheels1Block

9 ай бұрын

@@jacobpavone3477 😂 tis true

Exceptional! You clearly have an eye for design and a lot of talent.

@ViKO35G

Жыл бұрын

Thank you! 😊

Wonderful job! Way to go. Keep the excellent work

excellent job, looks professional and great quality. I'd pay for that type of work!

Thanks for the video brother.. well filmed and thought out!

Wtf man that is CRAFT on a highest level! You are f. Crazy in a positive way! Respect for patience

Results are not perfect. Dude you killed that .that turned out absolutely amazing.

Great work 👍🏽 By the way, you’ve inspired me to make the part I need for my aquarium light 😊

I cant believe it... amazing!

This maybe the best thing i’ve seen in a long time

good stuff. I'd take it off now and made proper mould off of it. Not sure how strong the existing one is going to be in the long run.

How difficult was this? I’m sure it’s a lot cheaper than buying a diffuser that looks like this, im thinking of doing this too, great work

@ViKO35G

Жыл бұрын

Not that hard just time consuming, especially the sanding part. Also makes it easier if you have the right tools for the job.

@pinkinwarri304

Жыл бұрын

@@ViKO35G ❤

@pinkinwarri304

Жыл бұрын

@@ViKO35G what kinda foam did you use ?. I want to try that on my car too

@ViKO35G

Жыл бұрын

@@pinkinwarri304 Expanding Polyurethane Foam

@zechssiguro7476

Жыл бұрын

@@ViKO35G that's excellent work & idea!

Оо ма ти българин си бил бе. Мн добър клип браво

@ViKO35G

8 күн бұрын

Благодаря

Thankyou so much for this idea, have a 2010 i30 sr, no body mod/ aftermarket support, going ti busy a second bumoer to give this a crack with

First time or not you did a fabulous job! Great work and looks amazing! 👏👏👏

@ViKO35G

Жыл бұрын

Thanks so much! 😊

Great craftmanship, turned out awesome, well done

was thinking how to make splits, plexiglass amazing idea, thats what i needed

This is beyond impressive! I want to do the same thing but with carbon fibre for a mk2.5 mx-5 with quad tip exhaust

Brilliant job!

Some real DIY, respect🔥🔥

Genius yet humble

Can’t upvote this enough. Think I went into some kind of trance watching it 😁

Really nice finish for the cost. Awesome job will consider doing it.

Looks incredible to me ,awesome

I am impressed. Great job. Looks perfect on the car.

@ViKO35G

Жыл бұрын

Thanks!

Wow I'm just blown away amazing work

For a “not perfect job”, I find it pretty awesome and look beautiful on the car.

Damn bro the drool I need a bucket... 🔥🔥🔥

I'm impressed. Well done!

Wow that’s pretty clean!! your an artist !! 👍

From the perspective of creativity that's a 10/10 . If your car ( any car ) however should have a defuser like that it would had one . Designers know better . It's the same as if you get a brand new EVO with a specific ride height , change all the suspensions , lower it , change camber angles etc and expect the car will perform the same at cornering . Of course not ...because you thought you "knew better" and you changed the whole thing

I have to try this. I think I will try to turn the fins into edge lit turn signals and brake lights.

If I used spray foam on a bumper they would have had to repaint the whole car. He had excellent control of that foam dispenser and never got one drop on his flip flops props to him impressive

Браво, страхотна работа! Респект!

Man, you said first time doing this. It's Awesome! !

Amazing work man. Really impressive. Looks better than many expensive custom diffusers I have seen.

I was going to be a prick BUT I CANNOT TAKE ANYTHING FROM THAT MAN GREAT JOB!

Turned out really nice!

Very good work. My question is how long will it last? The adhesion usually doesn't last over time do to vibration and wind.

@ViKO35G

Жыл бұрын

It's not just the foam holding it, the diffuser is molded to the bumper with resin so it acts like a glue.

Excelente trabajo 😍😍😍, saludos desde Mexico 🇲🇽🇲🇽

Se deixassem o acrílico transparente podia colocar uns leds neles.. Acho que ia ficar legal! Belo trabalho!

Pretty cool bro.. thanks

Came out pretty good mate! Nice job! 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧

@ViKO35G

Жыл бұрын

Thanks 👍

It looks perfect to me. Nice job.

You did a grate job I like the results 👌🏽

This is awesome work my guy.

Un lavoro eccellente, complimenti!

Perfect results.! How the diffuser you made bonded with the bumper without using skrews?

@ViKO35G

8 ай бұрын

The polyester resin acts as a glue.

Nicely done! How many cans did you use?

Nicely Done!

Суппер👍 подскажи пожалуйста, пена там и осталась? Или ты её от туда убрал?

Dude this is insane 😳😍 You did an amazing job!!

@ViKO35G

11 ай бұрын

Thank you!

This is exactly what I want! 😩 Omg what a masterpiece 😍

@ViKO35G

Жыл бұрын

If you can have the time and patience, you can do it!

This looks amazing!

Well done Dude

@ViKO35G

Ай бұрын

Thanks!

Awesome job man. Nice style and clean work.

@ViKO35G

Жыл бұрын

Appreciate it!

INSPIRATIF. THANKS, BRO.

dude that looks amazing, great work

@ViKO35G

Жыл бұрын

Thank you!

1st time! looks fantastic to me!! i am gooing to try this on my 87 Fiero GT!!

Great work man! 👍

I appreciate the craftsmanship, but it's really more along the Iines of a diffuser look rear valance zero effect on efficiency, no under tray to feed that nice radius , all in all it was enjoyable to watch you build something from scratch nice work

Very impressive mate! 🔥

Много добре ти се получи,евала.

Love this. Forgive my ignorance, I see many videos making mold and countermold. Will the foam stay underneath? Hasn't this affect the difference material shrinkage? Thank you so much!

@ViKO35G

3 ай бұрын

You won't have any issues with the foam. 1+ year still looks the same as when I made it.

@hernanboioli1355

3 ай бұрын

@@ViKO35G Perfect. When I start manufacturing my diffuser, I'm going to do it like this. Thanks!

this is what i need .... goodjob

The result is pretty amazing for "the first time" oO. Don't blame you ^^

Looks great. Well done

@ViKO35G

2 ай бұрын

Thanks!

Wow that’s great. Thanks

Espectacular quedó saludos desde Argentina

Might sound stupid I'm trying to do a similar task but keep get told that when I go to apply my resin the expanding foam melt. How do you stop the expanding from from melts or what resin should I avoid qnd what should I use thank you?

@ViKO35G

8 ай бұрын

I never had issues with melting. Just do 1 or 2 layers first so it doesn't built too much heat.

I mean wow, lose enough to perfect, who cares!? Looks great!

Great job bro 🔥

Excellent job.

Great job!

@ViKO35G

Ай бұрын

Thanks!

Excellent creative work! 😎👌

VERY WELL DONE!!!

Amazing result good for you boss

I gotta do this for my accord coupe 8th gen, can’t find an aftermarket one worth getting anywhere

Yo great job! I’m about to try and make over fenders for my z

Lots of time and material for a part easy to purchase.

@ViKO35G

29 күн бұрын

Not everyone has the money to buy something like this. For my car the price is $1000 without shipping. I made it for $200 and also earned a lot more from monetization ¯\_(ツ)_/¯

Impressive wheels.

It came out really nice, man! Now, since you went to all the trouble using plexiglass for the Thins, you should have left them clear and drilled a little hole in from the back side and inserted an LED. Then, each one would have glowed around the edges at night time. Again, great job!

That looks way better than I expected it to, ngl. Maybe it doesn't look so perfect in person but from where I'm sitting it looks professionally done

Whaaaaaaaat!! That looks great