Кривезны налепил. благо внизу не видно, да и машина такая что пофиг на неё
@juozas712411 сағат бұрын
Does the foam stick to the bumper's clear coat, or do you have to sand it before applying foam, for it to stick?
@ViKO35G5 сағат бұрын
Depends on what foam you are using. The brand I used can stick to clear coat or other smooth surfaces. But if you plan on placing it permanently, I would recommend scuffing the surface first.
@juozas71243 сағат бұрын
@@ViKO35G thanks
@JustRados15 сағат бұрын
you are bulgarian? me too
@ViKO35G13 сағат бұрын
Yes.
@robinbebbington706318 сағат бұрын
Much better than yet another glue on diffuser. Looks great.
@ViKO35G13 сағат бұрын
Thanks!
@powerofone164520 сағат бұрын
Dude that is so good. !!!
@ViKO35G13 сағат бұрын
Thanks!
@MiguelLeon-eq5ms3 күн бұрын
Hey do you do side work I'm willing to pay for shipping and receiving if you can customize a 2008 scion XD front and back bumper.
@ViKO35G2 күн бұрын
No, sorry. I do stuff for myself only.
@silvonphillip44124 күн бұрын
Can u do dis for a Nissan cube 2012 ??
@ViKO35G4 күн бұрын
You can do it on every car, as long as you have the skill, patience and money.
@user-vy4eq5tx9g5 күн бұрын
Va a pesar más la defensa trasera que el coche entero😂
@xicelinkx11 күн бұрын
How much to do mine ?
@ViKO35G10 күн бұрын
I don't do work for others, only for my car. You can let someone 3D print it for you with your own design.
@mariopsmt11 күн бұрын
good stuff. I'd take it off now and made proper mould off of it. Not sure how strong the existing one is going to be in the long run.
@FernandoF-qk1yv13 күн бұрын
Vaya fantasmada la virgen!
@derekedmunds2514 күн бұрын
They make rivet nuts that eliminates the need to do anything like this and they look clean and OEM like.
@neelwankhede454214 күн бұрын
What material needed?
@ViKO35G13 күн бұрын
Everything is explained in the video.
@hardyq509214 күн бұрын
I’ll buy that diffuser lol I been looking all over
They make what's called a "Minimally Expanding" spray foam. If you use it, then you won't have all those air pockets and it will be much stronger.
@tesiogdarius290119 күн бұрын
Damb it looks so goood
@ViKO35G18 күн бұрын
Thanks
@omarspost20 күн бұрын
A fine example of talent over technique. I can follow his technique, but I dont have his talent.
@traffic80620 күн бұрын
SO CLEAN❤
@traffic80620 күн бұрын
So freaking good ❤
@ViKO35G20 күн бұрын
Thank you
@peshkoyo111620 күн бұрын
Оо ма ти българин си бил бе. Мн добър клип браво
@ViKO35G20 күн бұрын
Благодаря
@m3gasll59222 күн бұрын
possible to have the reference of your foam, because the ones I buy are soft after drying.
@ViKO35G21 күн бұрын
The brand I used was Soudal
@m3gasll59221 күн бұрын
@@ViKO35G ok, and the fiberglass and the resin too because for me it doesn't look good and in the corners it swelled then the fiber plates not the foam
@ViKO35G20 күн бұрын
@@m3gasll592 The brand doesn't matter as long as you use polyester resin and not epoxy.
@m3gasll59220 күн бұрын
@@ViKO35G thank you I will start everything again because the resin ate the foam and it became soft.
@user-xh2ho9ne4m22 күн бұрын
Суппер👍 подскажи пожалуйста, пена там и осталась? Или ты её от туда убрал?
@liloldfrogy23 күн бұрын
Best looking G I’ve seen. I have a G but the baby G 😂. Super clean build bro.
@ViKO35G22 күн бұрын
Thank you!
@user-in3yq4vj2s25 күн бұрын
Brilliant video, so informative thx
@saka-pg9pt26 күн бұрын
Brp kaleng foam yang di habiskan untuk membuat itu???
@FrancesWo-nm7el26 күн бұрын
cool, I'm just selling finished car accessories, and he's definitely a designer and a craftsman
@midasbaysal519727 күн бұрын
Will the same kit work on an Q70/M56 ?
@ViKO35G27 күн бұрын
Yes, it's universal.
@cadenkunkle9495Ай бұрын
What liquid did u use to hold on the fiberglass
@ViKO35G29 күн бұрын
Polyester Resin
@_mk7080Ай бұрын
Amazing work!
@ViKO35GАй бұрын
Thank you!
@ConditionZero20Ай бұрын
very very good! do you have the Name of the Article? Your Link isn't working from my place (Germany) thank you :)
@ViKO35GАй бұрын
Symphony ambient lightning
@grubhubgrandpa9323Ай бұрын
You should do the headlights next 🔥🔥, love the vid.
@ViKO35GАй бұрын
Already did them a long time ago. Also there is an updated design for the tail lights.
@grubhubgrandpa932327 күн бұрын
@@ViKO35Gthank you for telling me 🙏 this is the best video I could find so I can do it my self. Question, why do you need red halos, isn’t the halos suppose to be white?
@ViKO35G26 күн бұрын
@@grubhubgrandpa9323 White light is blocked by the red tail light cover therefore brightness will be much lower than it should be. So you need red halos. I recommend Diode Dynamics or Morimoto if you want quality halos.
@myoneblackfriend3151Ай бұрын
I have to try this. I think I will try to turn the fins into edge lit turn signals and brake lights.
@sdc8547Ай бұрын
3,000 manhours and loads of money later: nah.
@ViKO35GАй бұрын
More like 300 hours and $200.
@RSXBENZYАй бұрын
He got some pretty ass feet👀
@madangryfisherman9044Ай бұрын
Pretty cool bro.. thanks
@kingwolfie3342Ай бұрын
How much power it makes
@ViKO35GАй бұрын
Around 320 engine and 290 wheel. I'm not chasing power, this is more of a show build, otherwise I would've put a turbo ¯\_(ツ)_/¯
@David_ShaggyCustomsАй бұрын
Ok but how do you shape it to be symmetrical and know it?
@ViKO35GАй бұрын
I didn't. Mostly measured it by eye, that's why I said it's not perfect. Next time it will be 3D printed.
@David_ShaggyCustomsАй бұрын
@@ViKO35G really?! That’s pretty damn good to be done by eye man!!!
@ronbelanger4113Ай бұрын
Lots of time and material for a part easy to purchase.
@ViKO35GАй бұрын
Not everyone has the money to buy something like this. For my car the price is $1000 without shipping. I made it for $200 and also earned a lot more from monetization ¯\_(ツ)_/¯
@bigwilly43729Ай бұрын
If that ain't perfect, it's living right next door to it. That came out really good man.
@Eddy-ev5tmАй бұрын
Looks incredible to me ,awesome
@georgeisaak5321Ай бұрын
From the perspective of creativity that's a 10/10 . If your car ( any car ) however should have a defuser like that it would had one . Designers know better . It's the same as if you get a brand new EVO with a specific ride height , change all the suspensions , lower it , change camber angles etc and expect the car will perform the same at cornering . Of course not ...because you thought you "knew better" and you changed the whole thing
@DerrelsainsАй бұрын
Great job!
@ViKO35GАй бұрын
Thanks!
@thatdude7896Ай бұрын
How did you handle the reverse housing when you blacked it out? Did you just tint it from the outside or did you dremmel it open and paint it?
@ViKO35GАй бұрын
Just tinted it with black paint from the outside to match the tail lights.
@CarlosTorres-yz9ebАй бұрын
Those taillights are nice. Where can I find them?
@ViKO35GАй бұрын
It's a DIY kzread.info/dash/bejne/lGedqpRpZZi7ctI.html - Updated Design: kzread.info/dash/bejne/Z6KCzcaQc9rHnpc.html
@fmgred8773Ай бұрын
🔥🔥🔥🔥🔥🔥
@tripodurraАй бұрын
👍👌😁
@EvolverRenegadeАй бұрын
I hope you really enjoyed the process, because final result is... questionable.
@TA-op3vnАй бұрын
That only works if the chrome plating does not have metal particles in it.
@patrickwayne9074Ай бұрын
So for example chrome over steel automotive parts won’t work with this ?
@TA-op3vnАй бұрын
@@patrickwayne9074 here is what I know. If you look around how to de-chrome you will find a lot of videos where people delete chrome from toy cars. Also, people use zap purple to remove chrome from inner parts of headlights and it works too. The kind of chroma that those parts have is not really chrome. I have Toyota and some of the interior parts are chromed. Me being in Texas, I hate that coz those part reflect the sun and blinding me. None of those things are working. I even tried muriatic acid. It made the test part look like shit. I used grinder to scratch of some chrome and found that the plastic part was first covers with red metal and I assume this would be copper and then it was chromed. I found one video where the guy possibly plumber deleting chrome by hydrolysis. He dilute 350 ml muriatic acid with 100 mil water. Then connects the wire one end to 6v large battery to negative and the other part to copper coupling and drops it into solution. other wire connects to positive terminal and to the part that his needs the chrome remove from. Also dropping in the solution. If it's bubbling, then it works and after some time chrome being stripped off. I hope it works. I didn't try yet, but on the video, it worked. I hope this will answer your question. I think it will work on steel as well. Just assuming
@towasmeКүн бұрын
@@TA-op3vn hi man, do you know the name of theh video, im having exactly the same problem, the ABS plastic has a niquel plating and then the chrome plating, and nothing seems to work on how to remove the chrome and the niquel. :(
@plamenspasov6723Ай бұрын
Супер работа колега! Какво фибростъкло ползваш и колко грама на м2 ?
@ViKO35GАй бұрын
Благодаря! 6:08 - 1x100gr и 3x450, закупено от Multitex
@cadu1202 ай бұрын
Se deixassem o acrílico transparente podia colocar uns leds neles.. Acho que ia ficar legal! Belo trabalho!
Пікірлер
Кривезны налепил. благо внизу не видно, да и машина такая что пофиг на неё
Does the foam stick to the bumper's clear coat, or do you have to sand it before applying foam, for it to stick?
Depends on what foam you are using. The brand I used can stick to clear coat or other smooth surfaces. But if you plan on placing it permanently, I would recommend scuffing the surface first.
@@ViKO35G thanks
you are bulgarian? me too
Yes.
Much better than yet another glue on diffuser. Looks great.
Thanks!
Dude that is so good. !!!
Thanks!
Hey do you do side work I'm willing to pay for shipping and receiving if you can customize a 2008 scion XD front and back bumper.
No, sorry. I do stuff for myself only.
Can u do dis for a Nissan cube 2012 ??
You can do it on every car, as long as you have the skill, patience and money.
Va a pesar más la defensa trasera que el coche entero😂
How much to do mine ?
I don't do work for others, only for my car. You can let someone 3D print it for you with your own design.
good stuff. I'd take it off now and made proper mould off of it. Not sure how strong the existing one is going to be in the long run.
Vaya fantasmada la virgen!
They make rivet nuts that eliminates the need to do anything like this and they look clean and OEM like.
What material needed?
Everything is explained in the video.
I’ll buy that diffuser lol I been looking all over
nextlevelperf.com/product/carbon-signal-rear-diffuser-infiniti-g37-sedan/
They make what's called a "Minimally Expanding" spray foam. If you use it, then you won't have all those air pockets and it will be much stronger.
Damb it looks so goood
Thanks
A fine example of talent over technique. I can follow his technique, but I dont have his talent.
SO CLEAN❤
So freaking good ❤
Thank you
Оо ма ти българин си бил бе. Мн добър клип браво
Благодаря
possible to have the reference of your foam, because the ones I buy are soft after drying.
The brand I used was Soudal
@@ViKO35G ok, and the fiberglass and the resin too because for me it doesn't look good and in the corners it swelled then the fiber plates not the foam
@@m3gasll592 The brand doesn't matter as long as you use polyester resin and not epoxy.
@@ViKO35G thank you I will start everything again because the resin ate the foam and it became soft.
Суппер👍 подскажи пожалуйста, пена там и осталась? Или ты её от туда убрал?
Best looking G I’ve seen. I have a G but the baby G 😂. Super clean build bro.
Thank you!
Brilliant video, so informative thx
Brp kaleng foam yang di habiskan untuk membuat itu???
cool, I'm just selling finished car accessories, and he's definitely a designer and a craftsman
Will the same kit work on an Q70/M56 ?
Yes, it's universal.
What liquid did u use to hold on the fiberglass
Polyester Resin
Amazing work!
Thank you!
very very good! do you have the Name of the Article? Your Link isn't working from my place (Germany) thank you :)
Symphony ambient lightning
You should do the headlights next 🔥🔥, love the vid.
Already did them a long time ago. Also there is an updated design for the tail lights.
@@ViKO35Gthank you for telling me 🙏 this is the best video I could find so I can do it my self. Question, why do you need red halos, isn’t the halos suppose to be white?
@@grubhubgrandpa9323 White light is blocked by the red tail light cover therefore brightness will be much lower than it should be. So you need red halos. I recommend Diode Dynamics or Morimoto if you want quality halos.
I have to try this. I think I will try to turn the fins into edge lit turn signals and brake lights.
3,000 manhours and loads of money later: nah.
More like 300 hours and $200.
He got some pretty ass feet👀
Pretty cool bro.. thanks
How much power it makes
Around 320 engine and 290 wheel. I'm not chasing power, this is more of a show build, otherwise I would've put a turbo ¯\_(ツ)_/¯
Ok but how do you shape it to be symmetrical and know it?
I didn't. Mostly measured it by eye, that's why I said it's not perfect. Next time it will be 3D printed.
@@ViKO35G really?! That’s pretty damn good to be done by eye man!!!
Lots of time and material for a part easy to purchase.
Not everyone has the money to buy something like this. For my car the price is $1000 without shipping. I made it for $200 and also earned a lot more from monetization ¯\_(ツ)_/¯
If that ain't perfect, it's living right next door to it. That came out really good man.
Looks incredible to me ,awesome
From the perspective of creativity that's a 10/10 . If your car ( any car ) however should have a defuser like that it would had one . Designers know better . It's the same as if you get a brand new EVO with a specific ride height , change all the suspensions , lower it , change camber angles etc and expect the car will perform the same at cornering . Of course not ...because you thought you "knew better" and you changed the whole thing
Great job!
Thanks!
How did you handle the reverse housing when you blacked it out? Did you just tint it from the outside or did you dremmel it open and paint it?
Just tinted it with black paint from the outside to match the tail lights.
Those taillights are nice. Where can I find them?
It's a DIY kzread.info/dash/bejne/lGedqpRpZZi7ctI.html - Updated Design: kzread.info/dash/bejne/Z6KCzcaQc9rHnpc.html
🔥🔥🔥🔥🔥🔥
👍👌😁
I hope you really enjoyed the process, because final result is... questionable.
That only works if the chrome plating does not have metal particles in it.
So for example chrome over steel automotive parts won’t work with this ?
@@patrickwayne9074 here is what I know. If you look around how to de-chrome you will find a lot of videos where people delete chrome from toy cars. Also, people use zap purple to remove chrome from inner parts of headlights and it works too. The kind of chroma that those parts have is not really chrome. I have Toyota and some of the interior parts are chromed. Me being in Texas, I hate that coz those part reflect the sun and blinding me. None of those things are working. I even tried muriatic acid. It made the test part look like shit. I used grinder to scratch of some chrome and found that the plastic part was first covers with red metal and I assume this would be copper and then it was chromed. I found one video where the guy possibly plumber deleting chrome by hydrolysis. He dilute 350 ml muriatic acid with 100 mil water. Then connects the wire one end to 6v large battery to negative and the other part to copper coupling and drops it into solution. other wire connects to positive terminal and to the part that his needs the chrome remove from. Also dropping in the solution. If it's bubbling, then it works and after some time chrome being stripped off. I hope it works. I didn't try yet, but on the video, it worked. I hope this will answer your question. I think it will work on steel as well. Just assuming
@@TA-op3vn hi man, do you know the name of theh video, im having exactly the same problem, the ABS plastic has a niquel plating and then the chrome plating, and nothing seems to work on how to remove the chrome and the niquel. :(
Супер работа колега! Какво фибростъкло ползваш и колко грама на м2 ?
Благодаря! 6:08 - 1x100gr и 3x450, закупено от Multitex
Se deixassem o acrílico transparente podia colocar uns leds neles.. Acho que ia ficar legal! Belo trabalho!