I've said it before and I'll say it again; This is ART. F*cking Beautiful Mate, your attention to detail every step of the process is impeccable.

Your videos are helping me get the guts to try and make my own one-off fiberglass parts. Appreciate you

@TofuAutoWorks

Жыл бұрын

That's awesome to hear bro! Thank you

@lsjess4147

Жыл бұрын

Me as well I feel that challenge part is going to be the mold finishing

@user-cu2ix2cs5b

11 ай бұрын

너도 귀하의냐

@danv2888

3 ай бұрын

He did all that work to only see that making them out of Carbon-Fiber would save him an extra Kg. However, to also state that skipping breakfast would save him an extra Kg also. So instead I would recommend you skip breakfast just a few more times, and you will also save that same 4.5 Kg.

I continue to be astounded by your attention to detail and willingness to even look in the general direction of CSM without gloves on. Looks great! Gaps / shut lines are much better than the factory ones!

I have been making molds for over 47 years. I do custom fabrication on yachts. Your pretty good. It's fun watching someone else do all the work.

Good job Mate, the Wings fit as good as a Factory Wing & we appreciate you showing & admiting that you made some mistakes, you're only Human afterall 👍👍👍

22:44 "The most important safety gear of all, big hat." 😅 This cracked me up Man. 🤣

It’s crazy how you can cut/grind fiberglass while wearing tank tops and slippers. I get itchy just by watching your videos. Besides that, love your craft bro. Aloha from Hawaii.

@TofuAutoWorks

Жыл бұрын

Yeah it's a trade off. It's been crazy hot here the past few months and I'd rather be covered in fiberglass than sweating like mad in some overalls. Chur

Man when that fender popped out of the mold i was just blown away. The Part looks absolutely perfect right out of the mold. You´ve got some skills my god, excited to try this myself soon for my miata. Thank you for these videos! Greetings from Germany

You should be stoked with that result! They look awesome! And fit perfect. A lot of work has gone into these and every bit of it shows in the final result. Great work! Been good to watch the process too. Can’t wait to see the next additions 👍🏻

I think you are dreaming all night about fiberglass... Nice job man !!

I hope your channel will gain millions, so when you're huge I can say "yeah, been following this dude since cyberpunk miata"

Mate you make alot of work for yourself. I seen a dozen things that didn't need to be done.But very awesome that you gave composites ago I take my hat off to you for showing people composites can be done at home

You are truly an artist....wizard if you will....as you perform magic with fibre glass. Also, i do love your safety jandals

@TofuAutoWorks

Жыл бұрын

Cheers bro. The restraint it takes me to not work in jandals or just barefoot in each episode haha.

@adinlouw

Жыл бұрын

@@TofuAutoWorks hahahaha, ive seen in some episodes you lost the battle against working bare foot

👍 Каждый раз когда захожу в ютюб, жду новую серию от тебя! Мне очень нравится твоя работа. Продолжай радовать нас новыми эпизодами! Удачи тебе!

Да мужик упорства у тебя вагон и маленькая тележка. Крутые детали получились. Браво👍

I started a little composite shop two years ago, and my skill sets just now getting good enough to make parts

By the time this guy is done, the R36 is out. Ok but jokes aside, I admire your attention to detail. 😀

Marvelous works. The gaps look really clean and equally flushed. Nice!

you really have to say respect from zero to such a really great part you could say it's from the aftermarket so good it looks

10:10 The man even has a sofisticated Red Device to look for Air bubbles in Fibreglass

The amount of work here is astounding and your skill is highly admirable. Very well done. Your style of video is refreshing and very welcome in a sea of trash content. Thank you for your contributions.

You're representing NZ. Such awesome skills. I'm keen what to see what you do next.

You got craftsman’s hands brother..Great skill set to have!You can make anything you want..Nissan is lookin cool..Miata was a killer

I love the inlays of your Logo It looks awesome

what a professional finnish, im a big fan of stock body, but im sure with the detail you put into this the wide body will look amazing too

Oooohhhh yeah. Gimme that attention to detail. You know the way I like it...

good job for today. Excellent work! I want the tail lamp to be 35GTR! I've never seen a Stagea that even changed the tail lamps!

Was wondering when another video would be posted. Congratulations on another incredible work.

日本語字幕ありがとうございます。とても丁寧な仕事で 感動しています。

A wonderful video, a follower from Morocco, North Africa, good luck my brother

What a journey! Love your videos. Fantastic work!

Man of no words, but always enjoy your videos. Quality is top notch!

That looks mint mate can't wait to see how to change the rear end up

this looks sooo good, it doesn't even need the widebody 😉

reusable molds are just awesome!

Those fenders came amazing man..... great job. this is the stuff that keeps me addicted to car builds on the internet. S tier part for your build. thank you its been a pleasure to watch this....

Немного завидую вашему климату 😁 Отлично, как всегда, вдохновляет на качественную работу 👍🏻

There is no way to do it more perfect.... all the little details - it's just wow! And the result looks more than perfect! No one would belive that this is a "diy garage project"

Respek man, that fibreglass itch. You da man! Lol

A MASTER at Work, impressive

Dude ! That's incredible work as always 👏 I wish I had a friend like you in my circle .

Good job👌👍 very fantastic result

@muhammadkhoiru1416

Жыл бұрын

I'm really looking forward to your next project, hopefully it will always be launched

The quality and fit and finish of your parts is better than any off the shelf fibreglass part ive ever seen. Nice work.

Proper nissan stagea gtr wagon.❤

Nuck'n Futz! More amazing work. Now to go wrench on my own project for a bit.

I've been watching it since part 1, and it's so cool :) Good work 👍

I wish every company that made fiberglass parts was this good at it

greatest of compliments my friend

nicely done!! seriously should think about selling them maybe built to order, i'm sure lots of people would appreciate it!

ngl, GTR front end looks like more suitable as station wagon cars after i saw this whole journey

日本から応援しています I'm rooting for you from Japan. 完成がとても楽しみです I'm really looking forward to the completion. 完成まで頑張って下さい :D Please do your best until it is completed. :D

素晴らしい、美しい、完璧、驚嘆！

Those turned out awesome!

Use air to help release the parts,great build series 😎👍

Really cool. Fenders look great

Love it ❤, looks epic, with wheels, it will already turn heads.

You are an Artist my friend.

This looks OEM. This speaks how skilled you are. Awesome fam.

日本から見させて貰ってます！ 豆腐オートワークスさん　凄い技術ですね！ これからも楽しみにしています！！

@TofuAutoWorks

Жыл бұрын

ありがとうございます！

This is Work of Art!!!!!! Awesome JOB and sooooo much profesionnal. Congratulation and so much work💪💪💪💪

That crustacean tells it how it is

I think this is just the matter of time do carbon fiber of it 🎉ayy! Loving your work from Malaysia 🇲🇾

Well done. Keep up the excellent work. Thank you for sharing the magic. Truly amazing.

Built to perfection, you are the best buddy

really looking good - nice job

Your quality is amazing the details you take are better than any kit I have seen, keep up the great work

お疲れ様！ 今回もまたまた最高のクオリティーで動画を出してくれてThank You！ また次回を楽しみにしてます！

It’s cool to see that you don’t have to have the best of the best tools and shop to still create amazing stuff

Huge amount of work involved and to a high standard, great to watch 👍👍

Straight up fire 🔥 I'm almost dad like proud 😆 and we're probably from the same generation

Beautiful work, just beautiful!

Incredible work bro 👌🏼

After an eternity they’re done! It was worth the watch!

Your work is insane. Love this build 👌🏻

This is my favorite project in all of youtube. Can't wait to see the outcome!

You are killing it!!! Great job

Дуже гарне місце і природа навколо вашої майстерні!

Those Fender's, came out freaking awesome 👍 your work looks for sure like high quality OEM parts. Keep up the good work. Enjoying every session of car parts building therapy here 💪

Your work is so superb!!!

So impressed with how the fenders turned out. Great job man!

Massive progress! Well-done, dude!

I await every episode and when they come, they're always a treat.

I hope you are pleased with the results, they look really good and it was huge effort. Mad respect. 👍👍

I am looking forward to what comes next! Great attention to Detail as always 👍

Awesome work!

You've got amazing skills. Keep the videos coming.

Looks incredible. So Much work and so much patience

line flow well wit the bumper amazing work finish is amazing aswell

This has gotta be some of the best fibreglass parts I've ever seen truly amazing work kinda making me want to give custom parts a try

What a beautiful result! 😍 The process is very interesting, good job 😉

Tremendous job, Mate! So hyped to see the final result!

Always a treat when Tofu drops a masterpiece for our viewing and educational pleasure! Thx for sharing your hard work Tofu!

Those fenders came out awesome! The gtr front end is really coming together!

Loving the detail in your work,trying to learn something from it so i can make my own fender flares for my Volvo driftwagon build.👌🏼

Great work!

1st class brother. The effort and time put in has resulted in those fenders looking better than OE. Amazing job 🙌🏽

the quality of those parts are insane, they are a credit to your workmanship

I will repeat myself. Theyre awesome!!

Makes me itch just watching you cut. Nice workk

Yes a logo and name on your work.