Would be nice if the parameters dialog box was modeless instead of modal. Then it could be open during drawing, and allow very easy access to see/add parameters

Nice introduction Lars, maybe worth mentioning that when you introduce a parameter for something you already modeled, like in a sketch or an extrusion, you can ALSO directly in the parameter sheet find the dimension of extrusion length in the build-up-as-you go list of dimensions. There is no need to go back in the history and type it in there, you can stay on the parameter sheet, but the different section of it. You can also introduce calculations that use more than one parameter as to drive your model for one specified feature. Or: use the parameter and modify and use it in a certain way before applying it. An example might be a specified hole diameter, for which you need to extrude a body first like 1.5 times the specified hole diameter as to have a good construction after you draw and create the hole in it.

I'd like to see how you would round off the corners using the parameters.

Nice video Lars! I think you should avoid naming a component "body" in a beginner video. the distinction between components and the bodies within them is not obvious when you first start out.

Nice to see you, back in "business" ! thumbs up !

Good stuff, Lars. You missed an opportunity to demonstrate a useful Fusion360 feature: What happens when you realize that you misspelled a parameter name (With should have been Width)? Do you have to fix the error everywhere you used that parameter? No, just change it in the parameter table to the new value and all the references are corrected, as well. I find this equally useful when I realize that I have two or more parameters that are almost the same name but different function that should be clarified by a more different name. Thanks again. Good to have you back in from the cold. Err, well maybe not so much in Buffalo.

@cadcamstuff

5 жыл бұрын

Lol, thank you for the comment, John👍😊

Wonderful lesson. Thanks Lars!

Clear and concise (as usual). Thank you. Regards, Ruaidhri Dublin, Ireland

@cadcamstuff

5 жыл бұрын

Thank you!

I always learn something new, even from the basic tutorials, thanks!

Thanks Lars, I only got back in to it this week after a year forgot everything. You have a wonderful day mate.

lars your explanation is simply awesome i am a big fan of your videos on fusion360

Fantastic. Thank you

This was a HUGE help for me. Thanks for sharing.

Thanks! That really helped! I was confused at first as to why you did not have the sketches with the body. Now all bodies can use them with parameters. Great stuff!

hello mr.lars am orock jackson from cameroon i wana thank you for each of your leasons they do help me to improve on my drawing love the cnc acedemy its the best

Thanks Lars, this is ideal for me. I have just started using Fusion for my 3D printing and having the ability to quickly change wall thicknesses is ideal. Thanks again from a snowy uk

Lars I always learn something useful from all your videos , and no exception with this one.

@cadcamstuff

5 жыл бұрын

Awesome to hear 👍😊Thank you for watching

Thanks Lars, That finally tied some loose sketching and layout ideas into the real reason for doing it. I didn't understand the assemble and component difference. You have been so helpful in my reeducation to Fusion 360 (which I am constantly amazed to the ease and power of it)

Hi Lars, thanks for another great lesson!

Thank you. I’ll try to incorporate that way of thinking my design through.

I hope I understand this, I like the concept especially the way I am constantly modifying dimensions. Willl take some practice. Will watch again. Thanks Lars.

Great stuff Lars! Thank you for making these videos. Your pace, level of detail, and explanations are perfect. I appreciate your help!

@cadcamstuff

5 жыл бұрын

Awesome to hear 😊Thank you for watching

This software is amazing and so is Lars. Thank you.

@cadcamstuff

5 жыл бұрын

You are so very welcome 👍😊

I am becoming a Fusion 360 Pro! Thanks Lars!

Lars, thank you very much for all your tips. I appreciate it

@cadcamstuff

5 жыл бұрын

You are so very welcome 👍😊

I honestly did not know about starting the extrude from a plane other than the sketch plane. I thought for sure you were going to project. Great tutorial as always. Thanks Lars!

@cadcamstuff

5 жыл бұрын

Glad you found something new👍 And thank you for watching 😊

Clear as water!

another great video

Great stuff as always

@cadcamstuff

5 жыл бұрын

Thank you, Joe👍😊

This new series is great. I really love Parameters too. I mean, why use a parametric design software if you're not going to use parameters, right? P.S. The only thing I don't like about these new videos is the intro and outro music. It's significantly louder than the rest of the video so when it starts, my speakers start blurring it out and it's a bit annoying

great videos!

Just remodeled a part using parameters, awesome tip! Lets me play with slip fit tolerances. Thanks!

@cadcamstuff

5 жыл бұрын

Fantastic 👍😊Thank you for watching

Wish I had learned this months ago, but better late than never!

Good stuff as always

@cadcamstuff

5 жыл бұрын

Thank you so much 😊

Great stuff Lars.

@cadcamstuff

5 жыл бұрын

Thank you 👍😊

Thank you.

I'm glad you're back and I love your videos. The guitar riff at the end scares the hell out of me every time though. It's way louder than the rest of the video.

@cadcamstuff

5 жыл бұрын

Sorry, Brendan😊I’ll have to adjust going forward

@brandonterry1517

5 жыл бұрын

@@cadcamstuff No worries. Thanks for the reply. You're the man, Lars.

awesome

Clicked on "like" after 2 seconds 😏

Very nice!

@cadcamstuff

5 жыл бұрын

Thank you 👍😊

definitely some great features Lars, love the pseudo-project trick also.. I need to click on more options cuz I sure missed that.. thanks and God Bless!

@cadcamstuff

5 жыл бұрын

Thank you for watching 👍😊And for your comment

@jimmyfavereau

5 жыл бұрын

thank you! : ) if we hit the 'Falls' in the springtime, I'll give you a holler for sure Lars @@cadcamstuff

Thanks Lars excellent explanation of parametric design. It is very handy to be able to adjust the parameters that way. I wonder in you vast knowledge of Fusion I need to make some round pendants and have text the follows the roundness of the pendant. Do you have a video on doing something like this? I have seen some ways to do that it just entails using other programs then importing the file into fusion. - thank again - Al

Another terrific tutorial. I've been using the parameters feature for a few months before this tutorial and feel its really the 'right' way to do things. But I find there is either something missing in Fusion, or in my understanding of its use in the larger scheme of workflow. Let's say I make a ... Piston. I define PistonLength and PistonDiameter in the parameters and build off those. Next I import the piston to a new design that will make use of it. That new design will need mounts for the piston of course... Except the parameters from the imported Piston don't import with the object. So how do you develop the mounts/use for the imported component and keep it parameterized so the mounts automatically adjust if you resize the original piston?

Great video! Keep them coming ;-) Is there a way to share parameters between projects?

Great video thank you :) Layout sketches will help me a lot. Please turn down the volume on the intro and outro music though - it scares my cats ;)

another great video Lars, one question why would anyone put a thumbs down?

@cadcamstuff

5 жыл бұрын

Thank you, Adam👍😊

Topic Request: Sent you an email about 2 part mold designs for fishing lures. Is there any chance you could make that a topic? It's winter here in Michigan and this is something I would like to do more of over the winter. As always - great videos!

@cadcamstuff

5 жыл бұрын

Yes, thank you! I need to get on that!!

@btigenie

5 жыл бұрын

@@cadcamstuff That would be so awesome! Thank you!

Are parameters part of the overall document settings or are they different for each component?

Good explanation of using parameters. Very powerful feature. However, I find the ability to keep sketches for components outside of the component somewhat confusing. I thought this was just an unpleasant side-effect of the new "Create Component from Body" feature, which moves the body into a new component but leaves the sketch(es) behind in the assembly. I don't see an advantage and in fact find it confusing. But would welcome anybody to try and change my mind.

This makes things much easier.

is there a way of grouping parameters? in my design it is made up of lots of bits i.e. I have an X rail, y rail and z rail, so I have x_rail_length, x_rail_.... and the same from y_rail and for z_rail currently I just prefix but it just get very long and hard to tell if I have already made a parameter for something or not.

Great refresher for season 2. One thing comes to mind, how can I set up a project design starting point, like a template, so I don’t have to recreate some basic Parameters to get started on a new Design. Or, can I copy a Parameter set from another similar project into a new project? Groovy Santa...

@ron.owensby

5 жыл бұрын

There is an add-in called parameter I/O (Free) in the Fusion App Store. You can Import/Update parameters from or export them to a CSV file. MAC or WIN64 apps.autodesk.com/FUSION/en/Detail/Index?id=1801418194626000805&appLang=en&os=Mac

With is that how you spell it on the east coast? West coast is width! 😉

can you save parameters off for new projects? That would be handy as well

Love parameters. Can I create two objects tied to each other with only small difference? For example two boxes with different lengths? Would then like to add features that affects both. Shamfer for example

@nickandersonco

5 жыл бұрын

Inventor has something called an iPart that can accomplish this. I think SolidWorks has 'factory parts' and something called 'configurations' to achieve this, if memory serves me correctly. It would be nice to see something similar in Fusion.

Hi Lars. Very interesting and useful content. A question: could you do math with the variable names? For example: Wallthickness= (Length-Width)/2 Thanks.

@ImaginaryAce

5 жыл бұрын

yes

@thesfreader3068

5 жыл бұрын

As far as I know, yes, you can.

Sometimes I want to rotate sketch to another plane or copy, because I want to apply same sketch to other plane or move to other plane If you deal with this before, can you tell me episode number? or How I can do? Is it possible? rotate, copy or other action from origin plane to another?

In Fusion 360 is there anything similar to iParts in Inventor or factory parts in SolidWorks? For those who don't know an iPart is a part with parameters like this combined with a table for different variants you can select through. One master part to make several different variants.

@cadcamstuff

5 жыл бұрын

I might need more coffee; but this might be where derived comes into play...that is a future topic👍😊

@nickandersonco

5 жыл бұрын

@@cadcamstuff Thanks Lars, look forward to your insight. I hope your new role at work is going well.

Again my feature addition request since long say entering lenght=34 in dimension should create lenght parameter instead of creating one by one every time and even excel like column should be there... Just create 10s of parameter and you will find this tips very handy feature addition

@cadcamstuff

5 жыл бұрын

I like that idea👍😊

Lars, I am new to this type of software, how are you moving the project without hitting the Orbit button? I love your videos and I am learning a lot from them.

@SquareRootOfNegativeOne

5 жыл бұрын

it should have been just middle button but its shift+middle button.

@cadcamstuff

5 жыл бұрын

I cheat, kzread.info/dash/bejne/foGNp9CmdcfWpMY.html

@gavinboulton6878

5 жыл бұрын

Once you get a 3D-Connexion spacemouse, there's no going back! Its like an extension of your mind! So much easier and fluid moving models around on screen. I was dubious at first, but now its the best thing ever!

@chrisleech1565

5 жыл бұрын

I got a used Space Navigator in pristine condition. Worth every penny. Operate in your left hand. Regular mouse in the other You will be instantly addicted.

Lars, Great videos and have learned a lot from them. However, please tone down the intro music to be at the same level as your talking. It is a killer when watching on the TV. Thanks.

@OldCurmudgeon3DP

5 жыл бұрын

Ending too. Great tips. I'm cutting my teeth on remixing STL files & these features help.

@ron.owensby

5 жыл бұрын

I agree about the music!

@cadcamstuff

5 жыл бұрын

You got it!! And thank you 👍😊 I will adjust that

Hi, can we use the same User Parameter on another design without rewrite all

@cadcamstuff

5 жыл бұрын

Yes...The only solution I have come up with to this problem is to create a file as a master and start with that one...I should do a video on that now where I think about it. Thank you 👍😊

Hey Lars, why is it you are back to the old version of 360?

@cadcamstuff

5 жыл бұрын

I decided not to change until the new interface is default. I think it will confuse any new users who are not aware of the changes coming

Can the Parameter Table be sorted and/or printed?

@cadcamstuff

5 жыл бұрын

Not at this point as far as I know.

@rwilson1125

5 жыл бұрын

@@cadcamstuff there is something on the F360 store that exports and imports parameters. it is stored in a csv file, so that can be edited. Minor drawback is that it a parameter is referenced before definition, ie you go back and use a parameter lower down in the table, the import fails. The utility is trying to be too helpful. But, you can edit the csv file for proper order. One nice thing, is if you use a set of parameters a lot, plop them into a csv file and then import them into the new file.

In previous videos, you’ve indicated best practice was to create a component, then make the sketch, extrude, etc. Why do it different for this video?

@cadcamstuff

5 жыл бұрын

There are many great ways to make soup. Some might say this is a more advanced way to model your part

@MrDksmall

5 жыл бұрын

Lars Christensen ok I’ll keep trying various methods. Thanks for all the great videos!

🐱‍👤

boss: how to draw Allen screw and any type of screw easy.