Welcome back and happy new year Lars. I cannot overstate what a help you’ve been learning fusion. Thanks

@cadcamstuff

5 жыл бұрын

Happy New Year! Thank you for taking the time to watch!!!

BTW. Welcome back Lars Christensen

Great to have you back!

@cadcamstuff

5 жыл бұрын

Thank you 👍😊

This is exactly what I needed I just spent like 3 hours today trying to figure out how to do these things and you explain it in a nice 12-minute video

@cadcamstuff

5 жыл бұрын

Awesome to hear. Thank you for watching 👍😊

So glad to have you back. Please keep the videos coming.

@cadcamstuff

5 жыл бұрын

Thank you 👍😊

So happy to have you back!

Great to see you back and looking forward to a 2019 filled with Lars videos!

Glad to see you again Lars, and Happy New Year!

So good to have you back! It's good to be learning again.

So glad to have you back Lars! I hope you and yours have a great year in 2019!

Always a pleasure to watch you at work Lars, very glad your back.

Lars, draft is also found in sand casting , die casting, permanent mold casting as well as plastic injection molding. Also shrink allowance is req'd in all the above.

I’m extremely excited to see you back!

I cannot thank you enough...the value you add to my learning experience cannot be measured.....God Bless!!!!

Great to see you back Lars!

Glad to see you back!!!!!! Was wondering about video on sketching on 3D surfaces using Fusion 360, I reviewed to one on exhaust manifolds and still find my ability lacking. I know it must take so much of your time to make these videos, the one on the injection molding base with all of the fast forwarding and such took better part of week to complete my model, learned so many things following that example.

Woohoo more Lars in 2019!! 💪🏻💪🏻 Happy New Year!

Very glad to see you back Lars, Hope to see a lot more video's from you.

A passing thought, Draft is singular, drafts, are what you feel wheb it's windy! All the best, Matthew.

Thank you so much for your videos. They are a tremendous help. Learning the draft function helped me design new feet for a drum set that is getting donated to a school. Keep up the fantastic work.

Lars, glad to see you back.

Nice to see you again Lars!!

as always, very clear and amazing video, I learn new things from you every video.

OMG Lars! Very insightful video! Using taper and loft gives me more draft options. Thank you!

Nice to have you back. Thanks for the great videos!

@cadcamstuff

5 жыл бұрын

You are so very welcome 👍😊Thank you for watching

I'm just getting started and you helped me get unstuck while advancing my design thinking. Thank You!

Excellent tutorial. Easy for a beginner to follow. Thanks!

Yes, glad to see you back. Happy new year.

@cadcamstuff

5 жыл бұрын

Thank you elijahcbr 600 Happy New Year!

Thanks as always Lars, good to see you again.

@cadcamstuff

5 жыл бұрын

You are so very welcome :-) Thank you for watching!

the last method was exactly what I needed for my application, thanks a bunch

Thanks for the tips and showing us new and different ways, Lars. Always worth the time to watch your videos. Cheers, Gary

@cadcamstuff

5 жыл бұрын

That is awesome to hear Tools4Machines .Thank you for watching the videos

Thats Lars! This helped a lot and appreciate your content, this helped me finish up a design to train for climbing :) liked and subbed and will be watching the rest of the series now. Your content is like my TV lol

Combine cut. This is going to help me today. You are a great teacher Lars thank you.

@cadcamstuff

5 жыл бұрын

Thank you Mike Pavano :-)

Great to see you back Lars. As always, very informative...nothing but business here. Short, sweet and direct to the point. The essence of great tutorial videos!

@cadcamstuff

5 жыл бұрын

Thank you Brad

Love your channel Lars!! i've learned soooo much.

Great Video! So easy to find out how to use different commands watching your videos!

Welcome back, and thank you so much for continuing to teach us! Being a newbie with Fusion, your videos are immensely helpful!

@cadcamstuff

5 жыл бұрын

That is awesome to hear Notorious Meerkat .Thank you for watching the videos

Glad you are back!

@cadcamstuff

5 жыл бұрын

Thank you Yurek Vigo

Extrude angle and Shell helped me do exactly what I needed, thanks!

Great as always, really learning and enjoying, and wondering how lucky we are to live at a time that such a man like you exist. :)

@cadcamstuff

5 жыл бұрын

Thank you for watching!!😊👍

Thank you! Draft was what I was looking for to add that slope

@cadcamstuff

Жыл бұрын

Perfect. Thank you for watching

Great to have you back.. happy new year!

@cadcamstuff

5 жыл бұрын

Happy New Year to you!!

Lars it is nice to see you back!

@cadcamstuff

5 жыл бұрын

Good to be back 👍

Welcome back! As luck would have it, this is exactly the tutorial I needed! Thanks!

@cadcamstuff

5 жыл бұрын

Awesome 👍

fantastic -- this was a life saver for me

que bueno volver a verte!!!!! feliz 2019

Lars I'm glad you're back, it just wasn't the same without you.... 😃 And of course you've taught me several new things!

Welcome back ,and happy new Year 2019 :)

Welcome back...thanks a bunch Lars!

@cadcamstuff

5 жыл бұрын

You are so very welcome :-) Thank you for watching!

Lars, Thanks for this great tutorial. I needed this info just last night as I'm trying to learn Fusion 360. Missing your livestreams, but will give my attention to Brad. Looking forward to more from you, too.

@cadcamstuff

5 жыл бұрын

That is awesome to hear rflournoy .Thank you for watching the videos

As usual, awesome Lars.

@cadcamstuff

5 жыл бұрын

Thank you vansien

Season 2 is awesome, man!

@cadcamstuff

5 жыл бұрын

Thank you! 👍😊

fantastic options of draft and taper ,very clearly explained them all

@cadcamstuff

5 жыл бұрын

Thank you 👍😊

I'm just getting started and your video helped me get unstuck while advancing my design thinking. Thank You!

@cadcamstuff

Жыл бұрын

That is awesome to hear. Thank you for watching!

Gday, Thanks for the help., im new to Fusion360 and loving it, Cheers

Nice to have you back

@cadcamstuff

5 жыл бұрын

Thank you!

Very interesting ! Thanks.

Very happy to see you back :-) I will follow the season 2 with great pleasure, thanks ! Happy new year Lars :-) Regards.

@cadcamstuff

5 жыл бұрын

Happy new your to you!! Thank you for watching 👍😊

Excellent. Thank you. Thank you. Thank you!

Nice to see you again..

Hello Lars, Happy New Year to you and your family! Your videos are great and to watch the new Season is good, it refreshes what I have learned from your former videos! Thank you very much!!

@cadcamstuff

5 жыл бұрын

You are so very welcome :-) Thank you for watching! AND Happy New Year!!

Welcome back, Lars!

@cadcamstuff

5 жыл бұрын

Thank you Mickey Downey

excellent tips again, thanks!

Ah, Welcome back and Happy New year Lars and thank you. Again, I was able to add more tools to the tool box.

@cadcamstuff

5 жыл бұрын

That is awesome to hear Eric Mathieu .Thank you for watching the videos And Happy New Year!!

good to see u back Lars, happy new year

@cadcamstuff

5 жыл бұрын

Thank you Jur, Happy New Year!!

Very nice, it is always good to have more ways of doing things. I love how fusion has made me rethink how I work, I use a fair amount of bodies as tools now, to remove parts. Specially on complex geometry. One example is I had a surface that was curved in all ways but not symmetrical, and I wanted a text to follow the shape of the surface, and used a whole body just to delete parts to get it right.

@cadcamstuff

5 жыл бұрын

Cool example! Thank you for watching 👍😊

Hi, Lars Happy New Year from Denmark. Great to see that you are back and well. Looking forward to more quality video recordings from you, and thanks for the link to Brad Tallis Channel: @ He certainly also does a great job on explaining best use of Fusion 360.

@cadcamstuff

5 жыл бұрын

Thank you Poul Anker Ersly AND Happy New Year!! Best, Lars

Another great video, Lars! Thank you!

@cadcamstuff

5 жыл бұрын

You are so very welcome 👍😊Thank you for watching

Greetings from Argentina Lars,, So clear, so perfect are your explanations, so clear you speech, that i Thanks a lot ... You ´re the reason i can use fusion 360 with almost no limits to my invention.. Thanks again..

@cadcamstuff

5 жыл бұрын

Awesome to hear. Thank you for watching 👍😊

Man I’ve been missing these sessions 🤙

@cadcamstuff

5 жыл бұрын

Awesome👍😊

Well I only knew of one way... the taper angle in extrude of course, so all those were new to me and would have saved me SOOOOO much time recently had I known :) Thanks as always!!! Great video / tools

@cadcamstuff

5 жыл бұрын

Awesome to hear. Thank you for watching 👍😊

Happy new year my men.

Thank you, Lars

Soooo happy that you are back! Happy New year! What I know of fusion I owe it to you! Hugs!

@cadcamstuff

5 жыл бұрын

Happy New Year!! Thank you so much for taking the time to watch!

Great video Lars, like always

@cadcamstuff

5 жыл бұрын

Thank you!!!

I have years of ProE/Wildfire/CREO experience and started learning Fusion 360 for personal use and growth. I find it difficult navigating between the tool I work with and others such Sketchup, Fusion, AutoCad, etc. I appreciate how well you explain differences and features of Fusion 360 and you have made learning Fusion 360 easier. Thank you for your excellent tutorials.

@cadcamstuff

5 жыл бұрын

You are so very welcome 👍😊

Nice one Lars. And happy new year, all the best !

@cadcamstuff

5 жыл бұрын

Thank you. Happy new year 👍😊

Excellent. I was looking for a feature to add on a user panel. DRAFT! Nice tapered embossings add class to an otherwise boring design. Thanks!

good info THANKS Lars and happy new year too !

@cadcamstuff

5 жыл бұрын

Thank you for watching 👍😊 Happy new year!!

thank you cant wait for the live streams

I know you busy Las. But great to see you back, doing videos.

@cadcamstuff

5 жыл бұрын

Thank you, Peter

Great video, Lars. Thanks.

@cadcamstuff

5 жыл бұрын

You are so very welcome :-) Thank you for watching!

Very helpfull, im pretty new to Fusion 360 and enginering, but with fusion and your help its going pretty wel. Thumps UP!

@cadcamstuff

5 жыл бұрын

Thank you and thank you for watching

Guess who's back, Lars is back. YAY!

@cadcamstuff

5 жыл бұрын

Thank you, my friend 👍😊

Welcome back! :-)

Glad to see you back Lars! How about something about importing in files - specifically dxf files and how things work differently depending on how they were drawn, how they were exported, and what you need them for. I can give you a specific example of an import that drove me crazy today until I figured out what I did in the drawing/export to screw up my intended use in Fusion 360.

@cadcamstuff

5 жыл бұрын

That is a great topic! Would you mind emailing me your solution? Maybe I can work it into the video....Lars.christensen@autodesk.com

Nice to see you back,,, good topiciin and nice content from those. Happy New Year to everybody!!

@cadcamstuff

5 жыл бұрын

Thank you. Happy new year 👍😊

Hi Lars, Happy new year! Thanks for your useful and interesting videos!!!

@cadcamstuff

5 жыл бұрын

Hi Andrea Tabolacci Thank you for watching! AND Happy New year!

Thank you very much 👍👍👍🍺🍺🍺

I like this format. It'll be easier to go back and search for a concise video describing the different aspects of Fusion 360

@cadcamstuff

5 жыл бұрын

Glad you find it useful. Thank you for watching 👍😊

Somebody is better than Lars in Fusion 360 🤔🤔🤔 Naah....I don't believe it 😃😃😃So good to see you back, man ! Honestly ! Happy 2019 also !

@cadcamstuff

5 жыл бұрын

Thank you 👍Happy 2019 to you!!

very good lars wellcome Happynewyear

HE'S BACK!!!!!! Happy New Year Mate!!!!

@cadcamstuff

5 жыл бұрын

Thank you, Dan 😊Happy New Year!!

Happy new year Mr. Christensen!

@cadcamstuff

5 жыл бұрын

Thank you! And to you!!

thank you! :)

good job

Thanks!

Nice, thanks for sharing😀👍 Håber du har haft et godt nytår 👍😀

@cadcamstuff

5 жыл бұрын

Ja tak 👍😊 Happy new year

Welcome back Lars :)

@cadcamstuff

5 жыл бұрын

Thank you!

thanks