I like these videos because they remind me of my grandfather. He was a rancher and welder. No machine shops or fancy Snap Ons. I still have some of the tools he "made" to get the job done. All these hard workers learned from someone else. No tech schools, but tribal knowledge and hard work. This is "Doing the best with what you've got and succeeding"

Отлично! Уже не босиком, уже с гайковёртом. 👍

@Edimsell

Жыл бұрын

Göt

@maxim-perepelica

11 ай бұрын

Ресурс гайковёрта берегут, используют только при разборке 😁

@mcgaki666

5 күн бұрын

да у них и динамометрический ключ есть, все ок

Слово антифриз как я понял им не знакомо. Судя как просто откручиваются гайки ремонт был в прошлом месяце

@user-bp4gf9yp8o

Жыл бұрын

😂😂😂

@Edimsell

Жыл бұрын

Motorun bakımı düzenli olarak yapılmış.

когда он вытащил и выкинул с сторону распредвал, я натурально понял что такое культурный шок. Занятное видео.

@mehmet8612

10 ай бұрын

Yer toprak ve çeliği çizemez. Kültür ile hiçbir alakası yok. Geri takmadan önce temizlemiş olabilirler. Bu motorlar hassas değil. Minimum çabalama , minimum malzeme

У нас на металлолом аккуратнее двигатели разбирают.

@user-bp4gf9yp8o

Жыл бұрын

😂😂😂😂😂

Когда 10 человек собирает, а другие 10 разбирает, того и жди косяка где нибудь.

Вот нахрена блок возили в "специализированную" мойку высоченным давлением из шланга, заткнутого пальцем?

@user-vf6tw2gj8v

Жыл бұрын

Это заменяет фрезеровку плоскостей,плюс вода лечебная затягивает коверны от углекислого газа

هل من صلى على رسول الله عليه افضل الصلات والسلام🤲🏻🤲🏻

I like the way the guy taps each liner before fitting it to make sure they all sound the same, as one that sounded " off" would have a fault in it 😊

Des vrais mécanos hors pairs 👍 chapeau les gars avec peut de moyens et beaucoup de savoir faire 👍👍👍

Капиталка в полевых условиях! :))

That’s pure teamwork. Great to watch these professionals. Working conditions are not so great but they came out the best under given resources. Really hard workers.

@Noke1001

9 ай бұрын

Professionals? What are you talking about? it hurt me while I was watching this, the guys are scattering parts while they are dismantling it, did you see how he took out and threw the camshaft just on the ground, but how do they turn the engine block over? this is not a restoration cuz these guys without the slightest desire to do well simply rebuilt the engine. Also where is the oil lubrication when installing new shells and crankshaft? I'm done, I won't even go on🤦‍♂️

Honestly and truly admirable --- these guys have grit that can't be matched by the western world's laziness and power tools --- in fact the new era of mechanics is "replacers" and without their laptops can't even repair a wheelbarrow

All nicely torqued up, head skimmed, and i even noticed how they painted the block to make it look pretty.. i'd hire these lads any day.......over my dead body..!!!

Neat to watch their hard work but a little cleaner work environment would help a lot

Good mechanics done the old way john scotland

I love that truck! The decoration is amazing.

This place is the winner 2022 of "Cleanest Place in Pakistan".

Very interesting I like this channel great mechanics

मेरे पास भी बेडफोर्ड गाडी थी 1959 का मोडेल् था मैने सेकण्ड गाडी 1975 मे ली थी बहुत मजबूत और ताकदवान गाडी थी

So... How long will it keep running until it seizes up again

@blister762

Жыл бұрын

Depends on how much sand and dirt they stuffed in the crank case.

@rawldonjuerakhan3346

Жыл бұрын

Do you realise that this truck is over 50 plus years with what seems to be the original engine. I'm sure they've done this in pass and have had good results, hence the reason they're still in business. So to answer your question. Maybe another 50 plus years again.

@user-jk9jg7nt9x

11 ай бұрын

Westerners are jealous, they can not make an engine last for 10 years. How can a 3rd World country make the same original engine from 1950's run in 2023. Its amazing isn't it. Only Pakistanis can make a 70+ truck keep runnings like new. Keep being jealous..

@moplisanchez3635

9 ай бұрын

Debe, de, funcionar, pues, le, an, cambiado, camisas

@thegarageke

9 ай бұрын

5 years of continuous work

Bardzo dobra robota. Pozdrawiam z Polski 🇵🇱.

Ain't it so interesting to see how working together bears fruits 😊

@gordonwelcher9598

Жыл бұрын

I like the way the trucks are painted in rainbow colors and that the employees are allowed to wear dresses.🌈

Good job 👍

Hard working people

I wonder who the two guy’s sitting watching in the background at 23.00 are, probably quality control, never the less great video.

Very nice work

beautiful work ♥

MashAllah Hard Nd Good Work .......... By Wow Mechanics

am very impressed with your work, cudos

Impresionante, en media hora, bajaron, repararon y montaron un motor, son muy rápidos...

@franciscoortiz8247

Жыл бұрын

Si media hora 🙄😄

Saudações do Brasil 🇧🇷

Great men working together to make a living. Do they rip out the engine, overhaul it and replace it back in the truck all in one day?

Там тосол со светафора красный 😅

If they didn't drop everything down in the dirt, they wouldn't have to spend so much time cleaning it up before putting it back together.

@horstmuller7512

Жыл бұрын

@@claudehuyess4466 It's religion. When Allah was born, his mother first dipped him into the dirt.

@rehanshahrd669

Жыл бұрын

​@@horstmuller7512 shut up

@peternicholsonu6090

Жыл бұрын

Gives them good reason to clean each part. We work on benches at waist height...totally different concept. We also blow our noses into hanky or tissue and carry them around all day....they are horrified.

@essbee8028

Жыл бұрын

@@horstmuller7512 Ah what a shame It seems your mother dropped u in a pile of human excrement, especially when she couldn’t figure out who your father was. 👍👍 Word on the streets is your mother was popular on the block Nicknamed “slack sally”

@xkormann5684

Жыл бұрын

Sure..with modern methods, this can be made in half time...!

All that and you don’t even see it running

I just wish they’d show it running

@user-jk9jg7nt9x

11 ай бұрын

The proof that engine will work is the age of the bedford truck itself. It was originally made in 1950's, and has been running after 70+ years and will continue to run, as only those same mechanics have been able to keep it running for 70+ years, and keep it running for another 70 years.

@raufjaleel8317

8 ай бұрын

​@@user-jk9jg7nt9xbut this Bedford engine was excavated from the Mesopotamia.

@LuizCarvalho9374

6 ай бұрын

Gostaria de ouvir o ronco do motor retificado. Saudações do Brasil. Gratidão pelo vídeo.🙋🙏👍🤝

I'd like to see it start & run.

Hey Imran - what's the torque setting on these old stretched bolts I'm putting back on? Oh, yeah, it's hit three times with the 10 pound hammer.

With on KZread it was fascinating journey keep it up.

What a great idea for a ring compressor

Подсветка недавно красилась,а движок уже меняют.Вывод,мотор уже недавно меняли.

Very good restoration of age old Truck Bedford . I have seen Bedford Buses/ lorries/ Trucks in my child hood friend. ST buses in Maharashtra also uses Bedford engine vehicles in the older days, my childhood memories also get refreshed with the restoration of this Bedford engine Sir. D

@petersmith4455

10 ай бұрын

not a Bedford engine ! but a Nissan engine,

Nice video, I enjoyed 🙏🏾, good memories

It would appear when doing the headbolts up all that is required is a socket and a huge bar is sufficient

Bring this down to Texas.

Новые вкладыши, поршня, гильзы, все помыли из шланга, закрутили на глазок, нормально же. Даже заведется наверное. И минут 20 проработает.

TOP JOB GENTS , COMPLIMENTS FROM BRAZIL

It's kind of a funny "procedure" to throw everything in the dirt, after dismantling it.

@user-jk9jg7nt9x

11 ай бұрын

But it works. Whatever works, is the way to go.

Cylinderhead torque spec : YESSSS

I always thought that engine rebuilding involved micrometers, feeler gauges and torque wrenches. But interesting to watch nevertheless!

That ground has to be contaminated. Does anyone ever work inside and on a work bench?

@regd.2263

Жыл бұрын

Everytime I see them working it's always been on the floor with their safety flip flops on.

@horstmuller7512

Жыл бұрын

Workbenches (and even toilet bowles) are forbidden in Pakistan.

Beautiful Smart Work Good Job #Greatthings

Mantap kawan good

Ustad Papoo Sab from faisalabad ❤❤❤

Almanya'da 3,5 sene egitim aliyoruz ama yinede motor tamir edemiyoruz. Sadece parca degistiriyoruz.

Nice safety shoes.

Vietnam number one, 1980 no oil, vehicle run by coal

Ese motor no es el motor Bedford que conocemos nosotros en argentina es totalmente diferente al Bedford de aki

..amazing work’s.. ! 👍

An astonishing 😱😱

Форсунки масла даже не трогали, хорошо хоть помыли.

@maxim-perepelica

11 ай бұрын

Как говорил Вовка из тридесятого царства, ладно и так сойдёт ! 😁

Very good work congratulations Brasil

@jayhaviv4286

Жыл бұрын

This is Pakistan

Its not a Bedford diesel its a 70’s -80’s nissan PD or FE6. Great old engines

@normanbrunt2053

Жыл бұрын

As far as I know, they never built this type of Bedford with a diesel engine. Someone did a really good job of transplanting this big diesel into the old Bedford.

Bravo!**😊

What’s the orange stuff that seems to be in all of the water passages? If it’s what I think it is, there’s no wonder as to why this thing seized.

Brol!. Nuff said!. 🙂

Nissan 175 ,200 , 205??. Saludos desde colombia😊

I'm confused the the title of the video says restoration of old Bedford truck diesel engine, and rebuilding of a Nissan Bedford engine. I didn't know Nissan made Bedford engines, I use to drive them in the mid 1960's and they only had Bedford engines as far as I'm know made in Luton England fitted but i stand corrected if not true.

@imballin93

Жыл бұрын

It's a nissan U.D engine, early 90's model. Your correct about the Bedford engines however Bedford did use Isuzu engines aswell but not U.D engines, so must be a retro fit.

@CrMackey-kt3mp

Жыл бұрын

Hello from Texas yes allegedly Nissan Bedford teamed up for a short period greetings to all in England I was American teamsters union driver 1970 to 2000 great to be retired best regardes to all lord muck Kurt mills chanel may also know dulce and c r Mackey in Texas USA

@regd.2263

9 ай бұрын

@@CrMackey-kt3mp Hi sorry I missed your reply thanks for the information, I use to driver Bedford TJ's for Maynard's Original Wine gums in North London from 1967 - 70. They had coach built bodies built at Arlington Motors Coach Works in Enfield London no power steering on these boys but we managed. The brakes on the early models were of the vacuum type not very good took longer to stop 🥺 no joke. They were fun to drive though, I do have some photos of Maynard's trucks going back many years. Be glad to send some to you with your permission that is. Best regards Reg

I wonder how much time on it since the last tear down.

I wonder how much it cost to the owner

Nicework❤❤❤❤❤

Holy crap was that a power tool I saw?

Pinter pinter orangnya.

Cadê as camisas velhas ?? Botaram as novas, mas não mostrou tirando as velhas ...

Las condiciones de trabajo son lamentables para los trabajadores, trabajando entre la suciedad. Se ve que es parte de la cultura del país.

@user-jk9jg7nt9x

11 ай бұрын

Its not part of the culture to work in dirty environment. It is what is called make do with what ya got. They are doing best and are very good at their work. Do not make fun of them and their culture. Gracias Amigo!!!!

Bhai ap kis city sy ho

А что изменилось.? Интересует сколько это мотор пройдёт.

Los respeto mucho pero lo único que hacen es lavar un motor por dentro, que tipo de rectificación hacen? vuelve a poner pistones y todo lo demás viejo, que raro

Shouldn't they use torque wrench for some specific areas of repair!!??

Mantap.

2:20 Why this engine sieze? Either lube or water

Less resources spent on hideous decoration on the truck and put into more maintenance for the mechanicals may prevent such a need for rebuilds like this, just a thought...

i lok at that black and hydrophobic floor of Dirt and ask myself...where are the last generation members ? ..oh nevermind, they are stuck, glued to European and British Roads.....

What's a tension wrench

Are the crank seals easy on a Bedford

I wonder in real time, how much days took the motor rebuilding ?

@WorldsTrueNews

11 ай бұрын

2 or 3 days maximum. Truck is owner's source of income and he can't afford it to stand still for a long time. The team work is awesome. Happy to see them using a torque wrench.

Wonderful great excellent job great team work🎉

that when engines were made with good steel not junk today cant even get a cam to last a week now

Why do all that work and put old water pump back on. The only things that where new are piston sleeves bearing and gaskets. Farmers did this kind of stuff it’s not supposed to last just get you by for a while

How can the driver see out of the windshield with all those decals?

@CrMackey-kt3mp

Жыл бұрын

Robert you're right feel like a low rider in Los Angeles 1960 s

Thats not the original engine?

your idea and my idea of a "seized engine" are miles apart

Boden schön mit Öl verseucht

Bedford is a good truck but in Bangladesh it's going to Banned soon :(

I'd rather watch 1Hour @1X speed than watching 28min at 5000X Speed Im playing it ar 0.5X to be able to watch and enjoy But the lag of FPS makes it 🤢

Лично я бы сперва отмыл бы его а потом начал разбирать😂

@guljarsingh9726

10 ай бұрын

Yes fast pressure wash after work

Made in Pakistan High Quality

Not bedford engine but i would like to know which engine is that

@hubertsteenbekkers1522

Жыл бұрын

Nissan

The way they throw the parts on the ground is kind of nerve wrecking but since it’s the only repair shop around there I guess they have no choice. Or how they threw the engine block on the ground 😂😅😅