Just bought this saw today and used it tonight. It's perfect for what I do. Very happy. No more hand saw with a plastic miter box for me.

@lawofattractionc61

5 жыл бұрын

i want to buy this saw ... does it do good 45 cuts where the two sides match up .... thanks

@yaddi3434

5 жыл бұрын

Yes

@lawofattractionc61

5 жыл бұрын

@@yaddi3434 thanks for your response .. i am going to pick this up tomorrow

@carasmussen27

3 жыл бұрын

@@lawofattractionc61 I am buying this saw too, been doing a lot of reviews

@jeanluclouttit8365

2 жыл бұрын

7

I've had mine for almost 4 yrs and it was the first power tool I purchased aside from a drill or sander. I've built a lot of stuff with it over the years. Good power, reasonably accurate, and cheap construction (e.g. there's only a bearing on one of the rails). Despite that last point it still works great, the only [mild] issue I've noticed is that the brake does not seem as effective anymore (it takes several seconds to stop the blade). And also I was never able to get the clamp to work whatsoever. It's a good starter tool as the slider lets you make half lap joints, but if you have a table saw as I do now, it just seems to take up unnecessary shop space - thinking of trading mine for a fixed version.

I just got this saw today! I'm excited to get to work cutting shelves and such. I have the complete set of Ryobi tools. I am quite pleased with these tools. Thanks for sharing.

Thanks for the review...I just bought a 12” one Your review already made me glad I got it and I haven’t even opened the box yet I have to admit, I ended up getting a Delta Cruzer miter saw. It cost a lot more...I use it for Regular wood working projects. It slides as smooth as butter. It also doesn’t use those sliding rods, it has an interesting mechanical arm so it can sit basically flush with the wall and easily slides forward and back with very little resistance. It’s a long-term investment for me. Very solid saw and maybe the best one out there right now. Anyways, this is supposed to be about the Ryobi.

Thanks for the review! I just bought this one on sale a few weeks ago and I am about to try it also for chopping down old projects lumber into firewood and for my baseboards. Great review, very informative!

@MillennialReview

2 жыл бұрын

Glad I could help!

Great review. Looks like a good saw to have around the house. Please don't burn treated lumber it is bad for your health as it is considered hazardous waste. Stay safe!

@MrBillyClanton

3 жыл бұрын

Yes, I caught that too. Please don't burn lumber full of poisons in your fireplace.

I just bought one today, haven’t had a chance to open it up yet. Hoping it will make nice, clean cuts for my diy projects!

@nicholasroberts4668

4 жыл бұрын

Shannon Marie I’m on edge with buying one. I have a ten inch miter saw that’s not sliding and struggle with cutting 2-8 and 2-10 material. I’m 14 and working on making a business out of woodworking so things like that really have a significant impact.

@ctcarvlogs7697

4 жыл бұрын

Nicholas Roberts spend the extra money on deWalt it’s like $219 at homedepot. definitely worth every penny if you’re gonna use it for woodworking in the future.

@dr.z3426

2 жыл бұрын

Hi Shannon 😍

I watched this video to see if this would be good for me as an option for a compound miter saw. What I found out is that I still don't know...

@MillennialReview

4 жыл бұрын

You are special.

@Impulse_Photography

3 жыл бұрын

At my local HomeDepot it's $134.00 right now - - I am getting one tomorrow (before they change their mind on price).

Thanks for the review. I bought it on sale a few months ago, but am now just opening up today! (Months later.) :) This was a great refresher.

@laite007

4 жыл бұрын

ehenyor Hi, what’s the price on sale? Thanks.

@ehenyor

4 жыл бұрын

@@laite007 it was $139 plus tax!

Going to pick one up today and wanted to make sure it was nice, good review!

I like it! I was looking for instructions on how to use it but I can see it won't be hard. Thank you!

@MillennialReview

2 жыл бұрын

good luck

I’m using this for 3 years and still working

Nice review sir! Especially the unboxing and what comes assembled! Good job!

Great review! If you just want to cut firewood, lets see if it cuts angles, bevels, etc...

You bought a sliding miter saw to cut firewood??? This is just not right.

@tigerblood6823

3 жыл бұрын

😆

Perhaps you next video can include some mitered and beveled cut demonstrations. This was a good intro video. Thanks!

@MillennialReview

4 жыл бұрын

Great suggestion!

¡Mil gracias! Estoy por comprar una miter saw Ryobi y tenía la duda de como funcionaba eso del deslizamiento y de cuán ruidosa era.

@ferlukebakio2217

10 ай бұрын

Hola, que tal, ya han pasado un par de años, todo bien con tu miter saw?

@rf3644

10 ай бұрын

@@ferlukebakio2217 así es 👌👌todo perfecto. Muchas gracias por preguntar 😀

@ferlukebakio2217

10 ай бұрын

@@rf3644 estoy indeciso, probablemente compré una máquina deslizable de está marca pero inalambrica, así que no sé si se mejor una cómo está de cable o la de batería.

@ferlukebakio2217

10 ай бұрын

@@rf3644 ah y no hay de que, es que de entre tantos comentarios en inglés en los videos que he visto de está marca te encontré por eso al menos quería una referencia respecto a la marca si es buena.

@rf3644

10 ай бұрын

@@ferlukebakio2217 si es buena y económica. Más que otras marcas que son buenas también, pero más caras. Yo la compré en Home Depot

I bought this saw a few months ago and so far am very happy with cut quality, power, etc. The one thing I noticed is that mine slides very rough....rougher than anything I've used before. Did you have a similar problem by chance?

@jray1429

4 жыл бұрын

If you’re willing to spend more and see it is a long-term investment, I’d get the Delta Cruzer. Amazing saw that moves as smooth as butter. Of course, it matters how much you’re going to use it and what for too.

Not gonna lie I bought one of these and am very disappointed in it. I was using it to re-trim a house. I have re-calibrated the fence and vertical axis multiple times. It does not hold 0 vertical well at all, very obvious when coping base board. And cutting miters is completely hit and miss. Wish I would have bought a bosch or Dewalt.

I just bought this today at Home Depot.

@MillennialReview

5 жыл бұрын

Nice enjoy 👍

I love the saw .. I just purchased one yesterday. I was wondering what type of blade you recommend for 4×4 and 2×4 .. TPI wise?

I purchased this a few weeks ago and what caught my eye was that it was cheaper than the 7-1/4 model

@MillennialReview

3 жыл бұрын

Ooh good deal

@maadskittles

2 жыл бұрын

Yea I just bought it to and realized it cost less then the smaller one. I wonder why?

Wish you had shown how to set it up. Y'know, squaring the blade?

What’s the widest wood plant I can cut? Will it do 12” wide cut with a 10” blade because it’s a a “sliding” mitre? Thanks

Thanks for the review. Will be purchasing soon!

@MillennialReview

4 жыл бұрын

Hope you enjoy it!

Idk why some people consider ryobi as not good or junk. Their good quality imo and some tools have worked better then my craftsman tools.

@MillennialReview

4 жыл бұрын

I have been quite happy with it.

I wish you had cut and measured miters with this saw.

@MillennialReview

3 жыл бұрын

Next time

The clamp on this saw is a joke and the slide is so rough that it’s actually kind of sketchy to use. Returning mine today.

@MillennialReview

2 жыл бұрын

Oh my?

How do you review a sliding miter saw and never make a miter or check the accuracy of the cut angles? Any cheap saw will cut a board in half.

@MillennialReview

2 жыл бұрын

Apparently I did. Who know, glad there are better reviews out there.

Thank you!! Just picked it up after seeing video and used it today. Love it. What better blade would you recommend?

@MillennialReview

4 жыл бұрын

Diablo

@MrDavidelliottjr

3 жыл бұрын

@@MillennialReview yes

Did your slide out of the box feel stiff? I loosened the lock screw but it’s still incredibly stiff. Does not slide well at all. Any input would be great. Thanks.

@MillennialReview

2 жыл бұрын

It broke in a little bit

@cisco1dog

2 жыл бұрын

A drop of oil usually works. A drop, not a can.

Is it hard to do crown molding with this since it only has one bevel adjustment?

Nice thx man!! I'm gonna get it!

just bought this saw 1 month ago: its great for cutting my steaks!

@MillennialReview

4 жыл бұрын

Awesome 👍

@C1418OS

3 жыл бұрын

Steaks shouldn't be that tough, I think you might be cooking them wrong.

I Bought Ne A 10 Inch Cordless Ryobi Miter Saw. Havent Used It Yet But It'll Come In Handy when I Start My Winter Woodworking Projects. Why I Chose A Cordless Is Theres never An Outlet Around When Ever You Need It. Either The Outlets Are Behind The Couch or The eazychai. I Can Just slap A Battery In It & Start Doing My Woodworking Projects.

Loved the review, thank you!

just bought the saw and each slid cut through 5" fascia ends up being about a 16th of an inch off. Thoughts before I return it next week and get the Dewalt 10" slider?

@She_is_beauti

Жыл бұрын

Did you trade it?

What does saw blade do you have on the Ryobi right now I'm thinking I'll be getting a Diablo

Thanks, great review.

@MillennialReview

5 жыл бұрын

Thanks glad you liked it

I have an identical one and its hitting the throat plate does anyone have a solution

Would you buy it over the habour freight admiral?

Nice video! I think this is the saw I will purchase

@MillennialReview

4 жыл бұрын

Sweet 👍

Thanks for the review! Does this model do bevel cuts?

@MillennialReview

2 жыл бұрын

Sure does

Looks like you had the lock tightened on sliding it didn’t slide very well unless that is just this it is

How is the slide mechanism working over time? I’ve heard some reports that it feels ‘gritty’ and is not smooth. Thoughts?

@TheDigitalslayer

3 жыл бұрын

well two things, one is how it is stored, I knew some one who would store it in a very humid place and we had to wipe and WD-40 it to get it sliding again. also he let it sit too long. That and wipe it down after a rough job, because sand and grime can make make it gritty and rough causing it to gain friction. Other then that unless it some sort of defect, routine maintenance should keep it sliding.

Great review!

What music is in the background

@chrisgin8417

3 жыл бұрын

Comethazine - double decker

going to get one right now

thanks for the review.

You thought the work clamp was a good idea but didn’t use it on the right side of multiple cuts. In the directions it says do not do multiple cuts abs I have the scar to prove it.

@MillennialReview

3 жыл бұрын

Ouch

Just bought the same one today

@MillennialReview

5 жыл бұрын

Nice hope you like it

I am trying to find out if this miter saw rotates like one needs for baseboard 45 deg angle cutting. No comments on video or any of the comments on yay or nay, is it cuz it's standard for 100% of miter saws on the market?

@MuttonChops24

4 жыл бұрын

yeah the saw turns 45 and tilts 45

@TheSkystrider

4 жыл бұрын

@@MuttonChops24 thx yeah I actually went ahead and ordered it online cuz I was pretty sure it did, it's kinda the whole point of these miter saws. I bought a really nice Freud Diablo 50T blade for it too. Haven't had anything to cut yet but I'm pretty sure I'm gonna love having a higher end blade. I figure that matters more for a home DIY person than having a high end miter saw brand. Oh and I went with the non-sliding Ryobi miter saw to reduce weight and increase portability. www.homedepot.ca/product/freud-10-in-combo-blade-50-teeth/1000102618

@shannonmarie6227

4 жыл бұрын

TheSkystrider have you gotten that new blade yet and how is it?

@TheSkystrider

4 жыл бұрын

@@shannonmarie6227 I did but I haven't cut much with it. Cut like butter though. I think it's fantastic but I'm just a regular DIYer. Definitely seemed to have a finishing cut to my eyes.

What is the background music you used?

Thanks for the share 👍🏽

best part is when he went to chop the wood. lmao. ill take 3

Use only for cutting wood isn't it?

@MillennialReview

2 жыл бұрын

You can swap the blade for whatever material you like. The stock blade is for wood, but plenty of options are available

How much you pay ?

Thanks for this.

nice vid i appreciat ethe review

You only cut straight cuts like I would with my handheld. I’d like to see you make some simple miter cuts and see how it preforms. Simple 45 cuts. If people want up make simple straight cuts they don’t need this saw. It’s not for them

Great review. U still recommend saw

@MillennialReview

3 жыл бұрын

Absolutely

What do you think about the led light vs the laser? It’s suppose to line up with it shadow

@MillennialReview

4 жыл бұрын

Both work. I don't think I have a preference

@mcalixtro82

4 жыл бұрын

i myself prefer the led light. it actually shows the width of the blade cut since it uses the blades shadow.

thank you

Would this saw be good for DIYers?

@MillennialReview

4 жыл бұрын

Yeah

It would've been nice if you had shown us the miter and compound miter function and settings. You didn't mention things like motor feel, balance, ergonomics, and total weight of the saw.

What are those levers for?

@C1418OS

3 жыл бұрын

For levering.

I should have bought a saw like this one. I am struggling to cut large 6x8 timbers

Dude, for rough cutting? A real review would say..yes it cuts square, yes, it stays square. You could cut all that shit wood with a skilsaw, faster...too.

@bradleygroves7229

3 жыл бұрын

Well why dont you cry about it fuck dude

@patfuller6727

3 жыл бұрын

@@bradleygroves7229 Fuck dude....your really cool....dude...

@bradleygroves7229

3 жыл бұрын

@@patfuller6727 yea fuck you. I know why your mad that blue pill stop working dont get it up anymore old ass

@C1418OS

3 жыл бұрын

😐

@thomasclarke8220

3 жыл бұрын

Now lads, let's try to be civil. No need to go ape shit over a saw review.

Nice

Is it me or did his dog just took a dump on his video in back ground lol

@MillennialReview

4 жыл бұрын

Just you. Nothing of the sort happened.

@boardingbear

4 жыл бұрын

Dude acts like dogs aren't supposed to poop lol

@jaymarr4124

3 жыл бұрын

Cenmike, that's just a fantasy your subliminal mind wishes to see.

Can I cut 4x4 with this? I would assume I could

@MillennialReview

5 жыл бұрын

Yeah definitely

@julianmason9568

4 жыл бұрын

You can cut up to about 6 inches

What about cutting 4x4s???

@MillennialReview

4 жыл бұрын

No problem, will do it

Wait until you've had it for 1.5yrs, the ryobi "craftsmanship" starts to really show.

@MillennialReview

4 жыл бұрын

While that may be true, Ryobi is a homeowner brand and is not going to hold up to the likes of Milwaukee. Then again that's why the price points are so much lower.

@blueceligts180

4 жыл бұрын

Hmm... I disagree, there are many ryobi users myself included that have tools from ryobi for years with no issues. I've used mine in automotive for 6yrs with no issues and replaced my old blue with the new brushless line. Others stated they on a contractor level havent had any issues. The craftsmanship from my personal experience is excellent. I would expect it to be inferior but I intentionally abused my tools to see how durable they are, that includes dropping them carelessly, leaving out in the rain (that was entirely accidental) on a job site and everything still worked and works fine, and pushing/using them with an attempt to bog down. Despite these attempts over years no issues. Reason I personally love and stick to ryobi. I do love Milwaukee and I really want their impact wrench as the ryobi one I have is only 300 ft lbs of torque. Hopefully that'll change with a new brushless 1/2"

@emmanuelmota1

4 жыл бұрын

I've owned and used a set of Ryobi Drill and impact driver for 9 years. Its been used in the Nevada Desert and dust and back. Still kickin and work great.

@newmanfertig886

4 жыл бұрын

@@emmanuelmota1 Well this is a homeowner grade tool. It's just what it is. Pros pay a little more and use them everyday. Both tools have there place.

@newmanfertig886

4 жыл бұрын

Thinking of the Bosch with the attenuating arm. But you could buy two of these Ryobi's and have money left over. But I only need one.

Seeing someone using work gloves around any saw blade always scares the crap out of me.

Just bought this same one for $179 @Home Depot

@MillennialReview

3 жыл бұрын

Sweet

Awesome video

@MillennialReview

4 жыл бұрын

Thanks for watching!

Hangover 4.....reviews Mr CHANG 🤣🤣

I’m buying one ☝🏽

@MillennialReview

4 жыл бұрын

Sweet

You sound just like Jamesthebikeguy.

@MillennialReview

3 жыл бұрын

Haha imagine that!

James the bike guy???????

Can it cut a 2x12?

@MillennialReview

4 жыл бұрын

if you do a 50/50 cut

Bad idea

If any of that old lumber is pressure treated, you do NOT want to use it as firewood (or burn it at all). It is TOXIC to burn. People have become severely ill when using it as firewood.

@MillennialReview

Жыл бұрын

Good to know

Ryobi = crap. They don't even have a quality control system to ensure their products are not shipped with defects. Mine came with no holes in the metal base to install the workpiece support arms. I live out in the country, 3 hours away from where I bought it, so there simply is no taking it back to the place of purchase for exchange or refund!!

@MillennialReview

4 жыл бұрын

Sounds like a lemon

Why? 100% of the saws you can carry out of a store today will do this. ACCURACY matters to people with 1/2 a brain. Does the blade dish? Are the miters accurate? Is it square out of the box? "Melleninial Review" is so spot on. Your GEN makes videos that are great at wasting peoples time. I stopped well short.

@MillennialReview

4 жыл бұрын

Too bad you wasted even more time to comment

You are never supposed to raise the blade while it is spinning, and you did that the entire time. Please don't show people how to endanger themselves! Learn the proper way before you teach others.

@MillennialReview

4 жыл бұрын

Hmm have you ever been to a job site?

@newmanfertig886

4 жыл бұрын

I don't want to argue with you. Raise it up while it spinning all you want. My point is, when you're showing people how to do it at least "tell them" the right way.

@paja7647

4 жыл бұрын

No video is perfect. Anybody that buys the saw should read the user manual, then take responsibility for using the saw the right way.

@JayBuccola

4 жыл бұрын

Once he started cutting I had to stop watching. Informative otherwise, but the lack of safety is too cringe.

@JayBuccola

4 жыл бұрын

5:12 is just awful.

When i see a review when the time is waist on unboxing i just leave .

@MillennialReview

4 жыл бұрын

Bit you took the time to comment? Nice time management...

@jolldoes1515

4 жыл бұрын

Millennial Review + I was down posting while you were still unboxing next time go to the point cut a couple of lumber don’t play around .

@stephanielafleur9252

4 жыл бұрын

I'm a new and still learning wood worker and appreciated the full review, including the unboxing. Thanks for your fine video, Millennial Review!

@toddshumaker2715

4 жыл бұрын

Good video. I looked at this at my Home Depot yesterday, and I think I’m going back today to pick it up. Amazing how some folks think free videos should come with a set of instructions?