Woodage 🤣🤣

@ToolReviewZone

2 жыл бұрын

😐😡

@ap3126

2 жыл бұрын

@VCG yes brother you rock also plus finish carpentry Always keeping eye for you tubers Helps my flooring business out here Nor Ca keep it up

@VCGConstruction

2 жыл бұрын

@@ap3126 thanks buddy!

@doalex2085

2 жыл бұрын

It’s what I wake up 🆙 in the morning with;!!! 🤣

@seansfc

2 жыл бұрын

Funny how it says translate to English under the comment 😂

I would love to see Ryobi do a 40V 10" Table Saw, ideally with a rack and pinion fence.

12:45 thank you for actually using it on second cut... 👍🍻

I've never given a shweet shweet poo about the brake on the blades when it comes to these types of saws so I'm unbiased and unfazed by that aspect. My current table saw doesn't even have a brake, never had an accident with it. Paying attention to what you're doing when running power tools is #1. Now for the thick and juicy part, fark yeah I want these saws!!!! I do as much mobile as in shop custom audio installation, so bat-ray powered goodies are a huge bonus for me. Ryobi has more things that I actually use and need than any other tool maker so it's a no brainer here. The table saw will fit on my passenger side floor I'd bet and the mitre saw .... Oh baby!!! It's satisfying to pull up to a customers home or place of business, unpack my tools, complete a job (Ryobi has solar panels to charge batteries, suck it every other tool maker) clean up and bounce without leaving a trace that I was ever there!!!! From glue guns, caulking guns, drills, saws, ratchets and everything you can't even imagine that you need, Ryobi makes my life easier and more convenient than ever!!! I'm a professional and that means no more saying Ryobi is "diy" or "consumer" grade. I run em as hard as I want, as often as I want and never get let down. Diablo blades, router bits and Makita XPS impact bits for the screws (if there's a better Phillips bit out there, I've yet to find it) just complete the package!!!! Yeah, I'm likely going to be a customer of Ryobi for life!!! The ergonomics are impeccable, my arthritis riddled body can't take the vibration of some of the other brands, the triggers are smooth and easy to pull, I'm not going to disrespect other brands, but Ryobi is made for the human hand plain and simple!!! Get on board with the green machines!!!

@rolandbills3718

Жыл бұрын

No brake...no sale.

I have the table saw but have never used it. Now I'm going to, having listened to your lecture. Thanks for the good job.

❤ I love your videos you're funny you hit the best points you cover everything even demonstrate I really like your no-nonsense factual narrative about the products. Thank you so much!😊

I got the 12” corded miter saw and I love it! It works really good, the only complaint is the guard is straight plastic

Another fantastic video. Watched one of your older videos on the Ryobi earth auger last night. So glad you made that one since I was looking for a post hole digger and was going to get a gas one but so happy I saw your video on the Ryobi battery operated. Thanks for putting this information out there. I do wish DeWalt made a battery operated post hole digger .....will be my first Ryobi tool

@ToolReviewZone

2 жыл бұрын

Tha ks so much for the awesome comment Scott 👊👊👊

My FIL recently retired and now does handyman work. These would be absolutely priceless for him, but he has the old school resistance to cordless tools.

That Miter saw sounds like a vacuum cleaner. I have the corded Ryobi table saw, it’s fantastic. As far as the noise & dust, being outside it doesn’t matter. Those two Ryobi’s get 👍👍👍

@jewdd1989

Жыл бұрын

I had the 10” Ryobi table saw, it was more frustration than anything and even dangerous at times. The rip capacity was limiting at I measured 12”, the fence wasn’t square and I constantly had to correct it, even then it wasn’t perfectly or adequately square and adjusting the bevel gauge was impossible. The motor struggled to rip through hardwoods or bevel cuts. I’m glad it works great for you, I finally got rid of mine. Hopefully Ryobi made major improvements on this “new” one but it looks awfully familiar to the one I had only mine plugged in and was 10”

I appreciate your review, I bought a ryobi table saw 10” I believe 3-4 years ago and it was an unfortunate purchase for me. The fence was not square to the blade, I felt like I had to square up the blade to the fence constantly and yet in ripping hardwood it struggled to power through the material and my strips were consistently uneven. I mean it does what a table saw is supposed to but barely and it felt unsafe often because it wasn’t square or the motor would struggle so much I had to hit the stop and try cutting through again. Another issue was the ripping capacity was about 12” so no ripping for cabinet sides or anything past a ft. My fault for buying a tool I didn’t understand enough, it did allow me to grow skills and become familiar, etc. but the headaches this table saw caused wasn’t worth the waste of money for me personally. The mitre slots were very difficult to make sliders for bc it’s an annoying, uncommon size and design and buying sliders to fit impossible. So that meant most bought jigs wouldn’t fit in the mitre slots nor could I adjust them to fit snuggly and operate efficiently without a ton of play. Perhaps Ryobi has upped its game since I bought mine but other than the battery power capability it’s design and set up looks the same.

Pretty beasty for the homeowner/DIYer. Even better as a power combo with 8 1/4 cutting random stuff and the 10 inch miter making angle and 3X cuts. Thanks for this and go Steelers!

@ILruffian

Жыл бұрын

With you on this. I have a 12" Hitachi, and a 10" Fe$tool Kapex. Decided to buy the 7 1/4 Ryobi for small trim cuts when I don't want to deal with the hassle of the other two.

Got the miter saw with stand for Christmas $249 couldn’t pass that up getting the table saw next week $259 tool only have plenty of Bat-Rays 🎉🎉

Your reviews are very informative AND hilarious. Thank you.

Great review. Thanks Vince !

Finally scored one... FYI, the sliders on mine came a bit too tight. Based on a tip on-line, you can adjust via the allen head screw and nuts on the right side slider. Mine is now butter smooth with no play.

If you can get a deal on the new 6AH HP BAT-RAYS, you’ll get 50% more cuts while maintaining the same footprint of the 4AH HP BAT-RAYS.

@ToolReviewZone

2 жыл бұрын

Damn right brother. Get those shaweet shaweet batrays!

@th3m1ke

2 жыл бұрын

Theyre on sale right now, the 9ah are too!

@ThePako123706

2 жыл бұрын

Ebay aftermarket batteries. Trust me

I went Lime green a two years ago !! No regrets !! Ryobi a company giving the working man old american pricess we can afford !

I'm just happy you remembered the whip snap.

@edwardk1545

2 жыл бұрын

Damn, I spoke too soon. Missed the second one. Anywho, awesome video as usual.

@ToolReviewZone

2 жыл бұрын

Hahaha, after I was called out about it last time, I'll never forget again 😅 😂 🤣

Clint awesome reviews as always the table saw has me almost sold I'm a rookie carpenter and my ryobi stuff is getting through the job enough but if you have put alot of miles on the hp table saw please let me know thanks for setting the standard for reviews on tools

Great review... Cordless is the way to go with both tools. Thanks for sharing the new Ryobi products!!!

@ToolReviewZone

2 жыл бұрын

My dude Tide 👊

@jacksmith2315

2 жыл бұрын

Id have to disagree. Cordless is under powered for these tools unless it takes multiple batteries, they tear through batteries, and they arent portable so you have a cut station. The cord doesnt get in the way cause you're not dragging it around. Corded will run all day and way more power. I have the metabo hpt 36v multivolt 10" dual bevel compound miter saw. It came with the adapter instead of a battery. I dont think ill ever buy a battery for it. Its 36v so im sure the power will be good, but im sure it wont last all that long. If you're just doing a few cuts a battery will be fine, but if you have it on a jobsite and use it all day, corded is way better.

@LazyCrazyGuy

2 жыл бұрын

​@@jacksmith2315 some jobsites don't have electricity. These are great tools if working off grid or you need to set up some place where an outlet is not in reach. For me as a handyman it's perfect whenever I need to make cuts but I don't have a way to get power to my saws. I work in apartments sometimes where I can't run a cord because tenants want their doors shut. A cord wouldn't allow that. Cordless isn't always the best but it definitely has it's place in the market. I for one am happy to have them because my main table 10" table saw and 12" miter saw are quite heavy and not portable at all. I have those for my home shop and these cordless are perfect for on the go.

Excellent overview! Like button smeeshed AF.

Looks like the table saw cuts So Smooth

I like how the new sliding miter saw uses only one battery. I have the older version that uses two 18volt batteries. It works just fine, and I really like it. However, once one battery goes dead, the saw will not work. I'm very interested in the cordless miter saw!

Ryobi is giving the other red and yellow brands a run for the money. Both of these machines are nice.

Definitely impressed with the power

it's kind of crazy you can get that many cuts out of a four amp hour battery

@ToolReviewZone

2 жыл бұрын

I was a bit surprised too, but they have been cutting good brotha man 💪

@xephael3485

2 жыл бұрын

One of the biggest benefits of brushless besides no brush wear...is energy efficiency.

Love your comedic approach to deliver your reviews. Thanks for the unbiased reviews.

@ToolReviewZone

2 жыл бұрын

Thanks brother 🙏

@gudenseieg

2 жыл бұрын

MOST ABNOXIOUS DUDE EVER

@ToolReviewZone

2 жыл бұрын

@@gudenseieg thanks 👊

very nice!!! keep the great vids coming

@ToolReviewZone

2 жыл бұрын

And thank you for the support Kentucky 🙏

Thank you for the video

The table saw was quite impressive! The miter saw, no so much. But for a home gamer/diy person they would both be worth the money.

"Handle hiy-yah, handle hi-ya..." Somewhere Eric Cartman is smiling.

@ToolReviewZone

2 жыл бұрын

😆👊

Another great video. I noticed the table saw has only one miter slot!?! And in my opinion it's on the wrong side... What's up with that?

Yeah I know... But still waiting for 40v versions, c'mon now Ryobi-ia... Thanks for the vid Clint

Look nice those new Ryobi tools, good quality for the price point. One thing I would say though don't buy these based on Ryobi's cut per charge claims. We tested all of their batteries with their circular saws against the claims on the website (same saw, battery and wood cut) and got a lot less than half of what was quoted.

the slow start may actually be Ryobi's version of a soft start on the mitre sawé

A up Brother Great content yet again, to be honest Clint I like them both…. REAL NASS LIKE 😊

@ToolReviewZone

2 жыл бұрын

Carl!!! What's up brother!!!!

Thank you for this video. I live in Australia. I want to buy this one but there are so many similar saw. Could you tell me the model?

Or you can get a battery converter and use whatever batteries you have. As long a they make the converter from whatever you are using to Ryobi. I bought one to use from Milwaukee to the old 19.2 Craftsman. Order from Amazon.

@donkeydiehard879

2 жыл бұрын

Not gonna get the best out of the tool going this route. Yes it converts physically so it fits but doesn't mean it will have the same output. Not a big deal when using a new style Milwaukee battery on an old craftsman. However, using an old craftsman battery on a new Milwaukee tool will not yield the same results. Ultimately, there is more to it than just the voltage.

I knew this was coming. I’m glad to see the chop saw back, but I’d love to see that table saw with a 10” blade, even if it was duel battery or 40v.

@visamedic

2 жыл бұрын

Couldn’t be too much to make a battery that’ll plug in and transfer AC into DC.

@xephael3485

2 жыл бұрын

@@visamedic or make it battery/AC dual power like other Ryobi tools

@davefink2326

2 жыл бұрын

@@xephael3485 as far as I know, we see no high torque tools that are AC/DC hybrid. Just lights and fans.

@grantmackinnon1307

2 жыл бұрын

@@davefink2326 that would be a massive exoensive power brick. dewalt can do it cheaply with 120 volt to run a motor, but to make a high amperage ac-dc power supply take alot of components. Would be nice if they had a 60volt adpater though.

I'm a new sub. All I got is old, brushed Ryobi tools, except for my Brad nailer, Jigsaw, DA sander and triangle sander. They could be brushless? I don't remember giving a crap at the time of purchase. I just didn't want to change battery type. I have however, come upon some of the newer DeWalt brushless drill and driver sets, and damn! There is a big difference. Ryobi has only recently begun to release a brushless line, to slowly phase out their brushed line. That brushless DeWalt my buddy has is a real screw-snaper.!

@coppulor6500

Жыл бұрын

You're fine. 90% of my Ryobi tools are not brushless. Yeah you get more power but the old ones have plenty. I used to have a DeWalt drill that I use for 10 years before the brushes wore out. I have one Ryobi that I used for 10 years as well approximately, before the brush wore out on that. Fortunately for me, there's a place near me that sells tons of barely used and brand new tools, especially ryobi, so I bought two or three extra drills for 30 bucks each. Look brand new. And they are the compact 18 volt. That place rules LOL :-).. By the time you have a problem with your tools, they will be woefully outdated. Note that I use the DeWalt to drill through hard coat stucco about 2 to 3 times a week. So I would say it was moderate use but fairly consistent. And I never had brushes go bad on any other tool than a drill since that's the cordless too the average person uses the mostl you use the most.

Whoa! 🤯 suns out guns out!

@ToolReviewZone

2 жыл бұрын

Hahaha, need a permanent for them 🤣

The wait for the table saw has been killing me

@ToolReviewZone

2 жыл бұрын

Now available at the Deeps. I put a link in the description as they are hard to find on the site

Gd job! Be interesting to see blade difference for run times also is freud blades any gd

@ToolReviewZone

2 жыл бұрын

Yeah buddy 👊

Awesome video dude!

@ToolReviewZone

2 жыл бұрын

Nail 👊👊👊

The miter saw seems pretty much like the corded version but maybe the shadow style line and battery. Table saw seems nice for the money.

@ToolReviewZone

2 жыл бұрын

My dude John Rice 👏💪👊👊👊

@MIKEC2000

2 жыл бұрын

I just bought the 10” corded and it has Shadow light

@johnrice9121

2 жыл бұрын

@@MIKEC2000 does it . I got mine years ago but it doesn't look like the shadow light

Nice tools!

I think the price for the kit with the batteries is worth it because the difference of those batteries alone you'd be paying a lot more and I believe the table saw includes two for amp hour so you definitely can't go wrong with the kit. Still waiting for availability in my area

@Venom01

Жыл бұрын

Just picked myself one up yesterday it has 2 batteries in the box and a free battery on the side that I return because it was 101$ going to the fle market to pick up 2 extra batteries for that price

Good review 👍, Is the mitre saw noise louder than the Milwaukee fuel drill?

@ToolReviewZone

2 жыл бұрын

Haha, just did a video using the Milwaukee and wondered the same thing. It's definitely higher than the Milwaukee, but the drill has it too for sure

Just bought one of these Ryobi table saws and after putting together realize it only has one sled groove ..... WTH ryobi ? why is this what they've chosen to save money on ? All my years never seen a table saw with only one . Now I have to get this thing back in the box and hope Home Depot takes it back . Really disapointed

That was funny at 4:03. I think it is time for Ryobi to hook you up with a Ryobi cap because reviewing Ryobi tools with a Milwaukee cap… 😀

You have the sawblade guard installed incorrectly on the tablesaw, alignment on mine was very way off out of the box, and GIT is not a word in the English dictionary 😂

Soft start on and off Dosent seem to have a blade break at all from what I can see On the miter saw cool video though Clint

Ryobi is cutting out the competition for the DIYer. Miter well accept that it is happening! Also why is the 2x4 more expensive? They are definitely 2 legit 2 quit

@ToolReviewZone

2 жыл бұрын

My man Dan still has it 😆😆👊💪

There’s a guard on the miter saw, so you really have to try hard to get your fingers in there before the blade stops.

Dam Clint you and your Diablo desease! You see I was in the local hardware store the other day just minding my own business looking for some tools when I walked past the saw blades and that’s when it happened, in my head all I could hear was that bull whip crack and Your voice saying DeeAblO so I bought that blade and completely forgot the tools I went there to get in the first place! Love the videos mate

Just bought the same table saw for 50% off at Home Depot for $200, which included 2 battery packs and charger. And also picked up the same miter saw, and bonus free Ryobi Quickstand, from a Home Depot online sale package for $229.00, minus $25 easy Home Depot Card signup bonus. Thanks Home Depot! I switched out both blades for Diablos before making a single cut😂.

@MrGwizyadig

11 ай бұрын

How is the table saw working out for you?

Thanks for the heads-up I have been waiting for the miter saw cordless 10" for a longtime. Just jumped online....still unavailable :-{

@ToolReviewZone

2 жыл бұрын

I have the link on the description 👊👊👊

First thanks for the review! Second there is no way you are in Ohio… the sun simply doesnt go there, I lived there for 2 deacdes. Moving on, not sure about only having 1 mitre slot on the table saw, probably ok. Wish you had spent the $400k on a short 2x12 to run the mitre saw through. Things being what they are I fully undertand. All kidding aside I really enjoy your presentation style it keeps me smiling and informed. And I do “smeeeeesh”* the like button every time. *not sure how many Es are in this word. Enjoy the sun it won’t last long 😂🤣😂🤣

@ToolReviewZone

2 жыл бұрын

Hahaha the weather is horrible around here. I have my farmers tan because of the sun today 🤣

Nice but since I’m a full user of Ryobi for my flooring business I have the last brushless 10” dual bevel with use of two hp battery’s that’s the one I wish they would have kept in there line but that’s ok I have and now I might switch to the cordless table saw since I use the skill 8 1/4 worm drive to test out the ryobi one to keep it in family , but wort the skill I do love the rail system .. anyway Thanks for the update look at tools

@ToolReviewZone

2 жыл бұрын

Thanks for the comment A P 👊👊👊

@ap3126

2 жыл бұрын

@TZ appreciate your reviews over VCG hahaha but really keep bringing them with your flair of real naas like

@ToolReviewZone

2 жыл бұрын

@@ap3126 hahaha, your awesome

These tools would have been significantly better if there was an option to have it plug in/hybrid option rather than 100% just battery.

@mase002

2 жыл бұрын

I have a feeling that a battery - 120v adapter is in the pipeline.

Seems like ryobi is stepping up

NICe review

When is it available in Canada?

Sounds like it boggs down in something as small as 2x4 material

$299 currently with a free 4ah! For the miter saw

Can you use a double blade with it...I think it's called a dato blade?

The only cordless tool I like is 12v drill. Anything bigger than that I want the consistent, always ready at full power, corded stuff. But that's just me.

@ToolReviewZone

2 жыл бұрын

I hear ya Inferno 👊

@jacksmith2315

2 жыл бұрын

How old are you and when was the last cordless tool made that you used? New cordless tools have just as much power as corded. These two tools id rather corded because they are stationary tools. Set up a cut station and there they stay, you're not dragging a cord around using it. But they do make cordless ones just as poweful as corded. Metabo hpt 36v multivolt, makita 36v. Drills, impacts, recip and circ saws, even a grinder, cordless all day. Never have to worry about my tools not having enough power and needing corded. Grinder is the one portable tool thats sometimes nice to have corded if you're running it constantly cause they go thru batteries quick and do a lot of bench work with them, but for quick stuff thats away from bench/work station, definitely cordless. I could never imagine using a corded drill or impact ever again, and theres plenty of stuff a 12v drill or impact wont cut it and 18v is needed and more than enough power.

The previous one is 36v style and it is duel bevel just to let you know

i been thinking of getting in ryobi tools for things like these that are budget friendly for my once a year DIY stuff, who needs to pay top dollah for a table saw that your gonna use once a year for 5 minutes, one day when i have money again i'm gonna buy a one of thoee packs from home depot during a sale

@farmeunit

2 жыл бұрын

Same. I have several of their tools and they have been great. Just got a chainsaw, even. A miter saw and table saw are the two things I really want to get.

@bird718

2 жыл бұрын

@@farmeunit nice....

Noob here. I saw he was cutting the 2x4 with the sliding motion. Was that just to show the slide for the video or is there a benefit to sliding it vs dropping it straight down on small pieces

Only thing Ryobi needs now is a solar panel charger for 18 and 40 volt batteries

Think'n that Ryobi needs to get that man a Ryobi branded hat...

He says "Here" like Cartman. I love it

It's a great tool honestly I recommend it friends.

Feels like they should have included an e brake on that miter.

@ToolReviewZone

2 жыл бұрын

Strange when it kept spinning like it did Joe 😆

I have thousands of dollars of Ryobi stuff. - I'm not sure I'll spend another dime with them. Recently I purchased a crosscut whipser mower. Loved every moment of it. Unfortunately, it broke within weeks of having it. some type of controller electrical issue (manufacturing defect.) Because it was outside of the Home Depot warranty period, I had to get Ryobi involved. This means that TTI is involved not so much Ryobi because Ryobi will say "sorry, once TTI the RLC has it, its up to them" ---- That is problem number one by the way. It spent one month at Home Depot and they figured they couldn't fix it. It then spent 6 days short of 90 days at the RCL with parts that were back ordered not to show up until March which would be 5 months after the RCL got the mower and 6 months since I sent it to Home Depot for repair. I spent days arguing with TTI. This was absolutely abhorrent. Ryobi was hands off, said they can't do anything about it. After battling for days, finally getting Home Depot to share some data, it forced TTI to recognize they will be outside their 90 day window. They are sending a new mower. Long and short: The brand new lawn mower failed. It took 3 months to get answers and if I didn't push would have been over 5 months. Ryobi themselves couldn't care less what their repair side was doing. Because of this, as my Ryobi eqt. fails, I will be switching to something else. I will never again spend a dime on Ryobi stuff. Cheap tools, breaking tools and customer service that couldnt care less, repair houes that couldnt care less.... this is a common "death rattle" of a company. If this place isn't turned around soon, Ryobi will be the new Harbor Freight of tools and they'll slowly be gone.

Clint if I had the space I would definitely have these to do woodworking projects you don't have to have expensive power tools to get the job done he's going to have decent and you got to have no how I had a friend that went out and bought all festool because of his eyes he says that's the Rolls-Royce of woodworking tools why in a lot of sense it is but there's so many other brands you can have to get the job done stationary tools mind you if you want to band saw you can get a Delta if you want to go that high route you can get a rigid table saw of course made by Delta but you'll save a little bit of money the same with the miter saw you can get the cruiser if you don't mind the price

I'm not a fan of 8 1/4 table saws but they do have there place

To me they seem very anemic compared to standard 110 contractor table saws, and miter saws. But hey I’ve never used a battery power table saw. I have used the 36v makita miter, and wow that thing impressed me all around and definitely didn’t lack power like this ryobi appears to, but the ryobi is 18v compared to 36. Idk i think they should be a bit less. But as always you did an amazing job enlightenment us toolies, much better than Vinny and the cruel gang

@jacksmith2315

2 жыл бұрын

I have the metabo hpt 10" dual bevel slider. The slider is on the side on the back so you can set it up right on a wall if you want since you dont have to worry about the slider bars extending out the back. Just like the makita. The 2 big things that got me into this saw, its cordless with their 36v multivolt battery, but it came with the adapter to run it corded instead of cordless, so can do both, just have to buy a battery since it came w the adapter not a battery. Saw has tons of power though. Very impressed. Very good quality saw. The best thing, i got the saw brand new at lowes on sale for $269. Yup... a $660 saw for less than 300. The adapter alone goes for $150-180, so basically paid for the adapter and 100 for the saw. This was not a return or anything. I was looking into miters for a couple weeks and almost bought the 7 1/4 kobalt for 150 when it went on sale but when i went to get it they were all out. Then i was contemplating the 12" kobalt for like 220 or 250, but i held off. Couple days later someone posted a vid of the metabo on sale for $269 so i looked for one in stock. Found a store that had 3. Almost bought 2 to sell one and get a free saw and all my money back, but decided to let someone else get a steal of a sale

@coppulor6500

Жыл бұрын

@@jacksmith2315 @jack smith you lucky and brilliant bastard!!! What a killer story about a killer deal for an (apparently) great saw. You provided all the pertinent info and that was a very interesting read. Especially since I had no idea they offered a saw with all those features. The adapter to run power is brilliant and as is the lack of a clearance problem. I can't believe you got it at that price. Jealous

@jewdd1989

Жыл бұрын

I had a Ryobi table saw, unless they’ve made major improvements avoid it like the plague

Cordless RY "I" OBI....what's not to LOVE? 👍🏻👏🏼

@ToolReviewZone

2 жыл бұрын

Hahaha whats up Nathalie!!!

@nathaliecreatescrafts8118

2 жыл бұрын

Spending my free time working in the shop Clint! Nothing better!!!

This is my first time on his channel. I love it right heaaahh

@ToolReviewZone

2 жыл бұрын

Hahaha, awesomeness 🤣👊👊

@ikbenvoetbal

2 жыл бұрын

@@ToolReviewZone im planning to get a line of ryobi tools. For the tablesaw and miter saw, i wasnt thinking to get the brushless models since I'll only use it occasionally for home use, mostly for making furniture. What're your thoughts on that?

What this with 8.25" blades instead of 10"?

Can the table saw rip 2x boards?

It's a bit of a swing and miss with these not being "hybrid" systems that can run off of a battery or 120V outlet. I have a Ryobi weed wacker that accepts an 18V battery or 120V power from an outlet...why not these?

@coppulor6500

Жыл бұрын

Yeah I love the dual power option on the Ryobi tools that I phone that have it. I don't use it often but it's sure nice to have when you need it

I just bought both, the miter saw is great but the table saw is not very useful because only 12 inch cut plus only 1 side can use pusher

When the wood costs 10x as much as the tools... 😥

High pitch noise is common for brushless mo tors

@ToolReviewZone

2 жыл бұрын

Not like this 😕

soft start saves power with any motor till full RPM... "R" (paint the walls Ryobi Green) "and simply make it happen!"

You know everybody keep saying that Ryobi is a DIY and personally I'm getting a little tired of it because I use them in construction I've been using them since they were blue and red and yeah they keep up with the wall in Milwaukee on the job sites and yes sometimes I get my work done faster than the people with those tools. I would say the more apprentice to pro tool. Especially HP line.

I went to look at this saw the other day. They didn't have one in stock, but they did have the corded version. I was not happy at all with the roughness of the rails. TERRIBLE! I went to Harbor Freight and purchased a Bauer 10" corded saw that was on sale for $228. I am totally satisfied. I have a lot of RYOBI ONE tools and had my sights set on the cordless 10" saw, but I had to assume the rails would be the same on it as the corded one I tried. I expected much smoother operation on the RYOBI. All of my other RYOBI tools are much better quality than their rough sliding compound miter saws.

This review was real nasss like

That's real nice like! I have the DeWalt FlexVolt versions of these, and love them - batteries is the way to go! Diablo! Every time I see it - I hear your voice LOL!

@ToolReviewZone

2 жыл бұрын

Lmao, and the whip snap 🤣🤣🤣

Blade break definitely faster on the table saw

Yeah, I absolutely agree with you that Ryobi's new Miter Saw is too high pitched. It definitely produces a much higher pitch than Dewalt's Miter Saw. Overall though, I love the designs of both of their new product tools, and how both are able to cut at a 45 degree angle. Also, I am probably the only one or maybe just a few who never liked the design of their batteries. I wish that Ryobi would spend some money to redesign their batteries to look like Dewalt's or Milwaukee's batteries.

@ToolReviewZone

2 жыл бұрын

My dude Bing 👊

@winkletown8828

2 жыл бұрын

Why can't Ryobi just continue being their own product? I've had zero issues with the battery design and my tools are my life!!! All Ryobi batteries fit all Ryobi tools (voltage matters) and nobody should be forced to buy all new tools due to a redesigned battery. I will admit though, my end game goal is to one day put a super sweet Delta table saw in my shop. But my Ryobi has been paying the bills for almost a decade ( end of this summer marks 10 years) and has never once let me down. 😎

been counting the days for another Ryobi deal on that mitre... I hate running cords...

the table saw fence still doesn't have a dial for adjustment. i m not impressive. the mitre saw still stay at single bevel? comon, they can do better

I don't see anyway to use crown stops on the miter saw like my Milwaukee has. That's a big drawback for me.

Hi Clint

Both with 2 4.0ah batteries for $459 at Home Depot right now…. Should I do it?!!?