RC ADVENTURES - LOSI 5ive T (5T) - Killer RC - SUPER BEE KILL SWITCH INSTALL
Автокөліктер мен көлік құралдары
www.PMHobbycraft.ca - Where I get my RC's in CANADA!
This 1/5th Scale SC Truck is 100% Bone Stock. Today I install a KillerRC*com Super Bee Kill Switch.. This is a KILL switch for the Ignition coil.. and electrical Spark System for the gas 23cc engine. I have never installed one of these before, and only recently discovered that this is a MUST HAVE for these types of large rigs. The safety factor alone is well worth this investment..
Check out how KILLERRC Installs a Switch themselves in THIS Blog! www.killerrc.com/forum/viewtop...
This will be the first thing I do before I complete any upgrades to this mammoth beast of a machine. Now that I have the kill switch installed, I can now move forward with my plannnnnnssss!
RC FORUMS: www.rcsparks.com/forum/
RC Photo Gallery: www.rcsparks.com/gallery/
TWITTER: #!/rc_sparks
FACEBOOK: / rcsparks.studio
CREATED BY:
djmedic2008: / djmedic2008
Mepic Nation Fan Channel: / mepicnation .
RC ADVENTURES™/RCSparks Studio™ © 2013 Medic Media Productions Inc.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without prior the written consent of Medic Media Productions Inc. Please note that the RCSparks Studio does not sell RC Products. The RCSparks Studio an independent promotor of a great hobby! I am not directly affiliated with any of the vendors or manufacturers in this video. the RCSparks Studio is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the RC ADVENTURES film series on KZread is intended for entertainment purposes only.
Пікірлер: 251
This video just saved me a LOT of time installing my Killer Bee on my 5T. Thanks for taking the time.
Brilliant mate! I just bought a kill switch and i haven't even got my truck yet haha! I won't be pulling the cord unless the switch is fitted!! No exceptions! Thanks for the great video mate!
Hey medic just wanted to thank you personally for turning my wife the nurse into an rc addict we were watching you, Jem and pinky and the wife says " hey that looks fun as hell " so one trip to my LHS and she walks out with her scx10, now every weekend we go trail riding. Life is good, thank you from Indy
Thanks for sharing with us this install my friend Medic. Go for 400 RC ADVENTURES!!!!
Only person I know who can make continuous shots work, good job. Nice to hang out mate. Been soldering a Goat 3s to my RC4WD Beast :-) a new toy for me :-) just waiting for the 21.5 brushless.
This reminds me that I have a Pico killswitch to install in my Baja before running it this year. Thx for the vid, Medic.
Thanks Medic, same to you too. Have a good week too.
Congratulations on your 400th episode. Respect to you and JEM. I love watching your video's. Just bought my own GoPro Hero2 but I don't think I'll reach your level ;-)
Medic! Awesome dude. Got mines ordered. Safety first.
Love the videos. I dont care if they are just repairing RC. Your dorkness is what makes them good. I mean dorkness with the utmost respect we are all dorks in some fashion.
awesome part you got there Medic, i got my killer rc kill switch for my baja over 2 years now
Just bought my first Losi 5T gas can't wait to get it it'll be delivered tomorrow
I really enjoyed that video. Amazing truck!
Dude, you are a trip! Thanks for the help! You have a new fan! Peace!!
I´m Chris from Brazil and i love your channel! thank´s for this video! I´m your fan! Thank´s a lot!
About time theres another video
Anytime, I love your video's. Much respect from Europe. All the best :)
I am really digging you video's the more and more you put out (that's what she said) But even if I don;t really have an interest in 5th scale stuff I love watching your vids Thanks again!!!
awesome bro your vids are always informative good work
I love everything in the hobby exept having to wait two weeks for parts to come in
Right on Medic!! yea remote kills are great!!! i just installed one on my 30cc extra 260... even though its a different type of ignition kill.... Anyways thanks again for such a great video!!! i get so excited when every u show up in my sub box!!! (umm thats what she said)
such a cool rc Im currently saving up to get one, hopefully Ill have my own in just a couple more months.
dude i love your videos i don't own a losi 5t and i watched this video until the end only becouse of the entertainment :D greatings from germany :D
Plus i like all of you videos before i even watch them just for the support
My first upgrade on my car 😊👍
Ilove all your vids this one was grate as usual
I love all your videos
thanks medic, i appreciate it, keep doin what you are doin. God bless you.
um Aaron buddy. Its not Sunday morning you would of been filming this early Saturday morning. Its OK you where up early lol. Painful was watching you mount drift tires not this lol I find your very intertaining, over the last year more and more with each video and always filled with some laughs and love every second of your videos. 5 away from 400 and knowing you it will be EPIC! Awesome job in this video man, really enjoyed it bud. Thank You very much for taking time on your weekend for us.
its my pleasure. You get to partake in one of the most kick-ass hobbies out there, and we get to watch. If the whole damn world wasnt in a recession (BOO UNEMPLOYMENT) i'd be in RC as well. SOO many ideas i cant materialise :(
Hay guys, small tip with the spark plug, tighten it with a garden hose, yes a garden hose, stick it in one end and keep tightening the plug and there will be a point where the hose will no longer grip the plug and just spin, that's pretty much perfect. also you can't cross thread when using this method either as it will slip.
all of your videos are LIKE clicking worthy
your freakin awsome your vids are the best keep up the good work medic you rock man
The Super Bee has adjustable cutoff. 3v, 4v, 5v, 6v. It comes set at 4v, which is good for a 6v NiMh RX battery. For a 7.4v LiPo you would set it at 6v. If you have LED headlights you can plug them in to the Super Bee and it will make your headlights flash when the battery is getting low, before it kills the engine.
Thanks for the great vid. It's a good idea to zip tie the gray cable to the stand-off that holds the ignition coil, to keep the spinning flywheel from damaging the cable. There is a video on how to install the Super Bee on a Losi on the KillerRC.com forum.
great vid... and good info
lol thanks medic now my wife wants to ban me from watching your videos hahaha every time i watch one i want more rc's...lol... mind you she liked jem's slash so much i got her one..keep it up dude! epic videos!!
I just want you to know Medic. Your my hero, lol! Straight up, i wanna be just like you when i grow up! lol!
Hey medic, BIG FAN, I crashed a RC car 40mph into a brick wall( that was a few years ago so haven't got any video about it grrrrr!) and that video was helpful, I needed a kill switch!!! still trying to fix it now!
yeah mate , they help out big time , Plus always makesure your wheel nuts are verytight to aviod stripping out the hexes , more common on the baja but best to do the same on the 4wds to save time and money. Cheers
Yeah, we all recommend it as the first hop up on any gasser and we don't suggest running, at all without one.
That killswitch is great! I use it on my 5b ss :) What you could have done tho is reused the rubber seal on the switch to shield it from dirt and water :) Keep up the good work. ;D
i love your videos!
3:57 😂 Had me laugh out loud!
Nice Broski!!! xD
i dont have any 5th scales i dont have any scalers i dont have any planes or boats but i love my rc and i love your vids :) and any time is a good time for coffee :p
Nice, I just got my Super Bee a few hours ago.
great vid
The Super Bee has a quick disconnect JST plug on the ignition cable. That should allow you to remove the battery box easily.
RC Adventures seem SO COOL in black =P
god medic that truck is beast!!!!
Love your videos, you more fun to watch then other people. Btw how do you aford it all, what do you do
Dude you're an awesome presenter!
MEDIC is EPIC!!
awesome!!!
medic your vids are great !!!!! :D
Hi I am having trouble to tune up my lost five carb. I have set it at 1/1/4 out low & 11/2 out high. When I hit the throttle, engine tend to die and spitting some gas and oil also it doesn't move. Any advice?
There is also some installation setup info on the Killer RC website and Killer RC forum.
Great vid, like hearing what u got to say..
Hi witch place is better to locate the kill switch the radio box or the receiver box.
Very nice
''The smallest possible...SCREWWWWWW.........'' lol so funny!
Awesome
I Ment To Say Keep up The Good Work The Copy And Paste Got To mess Up OPPS! Any Way Keep Up The Viedos Comming And MORE 5T That thing Is Way Cool Thanks For All You Do For The Rc Community ROB
Hey dude , Good vid mist have for largescale cars . Have you got outer wears fr your flywheel , filter and pullstart yet?
kool video MEDIC!!! \m/
hi medic!🙄 Can we install a kill swich over a fail safe? or do we need a extra channel? im asking cause im about to order the latest losi 5t wich have fail safe and a spektrum dx2e wth avc and fail safe...can i still lut the kill swich with tath gear? thanks man greatings from Portugal
I leave fuel in my dbxl but I usually run it every week lol. the fuel in the tank is fine for a couple months, I'd say if it's going to sit for more then a month or so I'd atleast just drain the carb so the Jets don't clog with oil
:( iam so sad and pissed off at myself I saw this video thought about getting this kill switch bought my losi on Monday broke it in on wensday and crashed it the same day becuz the battery. Came loose from the reciver and off she went into the side of my mom's brick house boooooom plow :'( ....all becuz I didn't listen to this video note to all 5th scale buyers buy a KILL SWITCH BEFORE U CRASH IT....great lesson
@samuelgibson8975
7 жыл бұрын
Billy Sanchez awww man that sucks hope everything is working again on your 5th scale
Thanks man but I have a normal hpi 2.4ghz fall safe installed and the battery fell out and it still put the brake on how. Keep it up all ways a good vid on your channel lol
Rozwaliłem zawieszenie dzisiaj w swoim Megapie...Ponieważ nie miałem takiego wyłącznika:-( a mogłem to obejrzeć wcześniej:-)
Bravo. Just be aware that a battle switch is 8 times the size of a Super Bee, doesn't include EMI filtered ignition cable, and doesn't have adjustable low voltage cutoff, or adjustable glitch sensitivity, and won't work with 2 channel radios, and doesn't have engine temperature sensor inputs, and doesn't have data logging for engine temp, battery voltage, and radio glitch info, and doesn't have audible buzzer alert, and doesn't have 6v LED status outputs, etc, etc.
On mi losi desert buggy xl put the dinamite kill switch but the light is no red when pres the bind buton the light is on release the bind buton the light is off have the stok transmiter maybe need diferent transmiter help me plis
medic is a BLS FAN!!! and a metalhead!!!! that's probably the best part!!! you rock brother BLS N METAL FOR LIFE!!!.....Oh ya....n RCS!!! LOL nothing like bashing ur brains out with some pantera!!!!
Stuff not made in China costs a little bit more, but the quality and customer service is much better. And its still way cheaper than a runaway. I know a guy that lost his whole HPI Baja in the ocean because of a runaway down the beach. Some people don't learn until its too late.
It's awesome bro I'm your fan what is your fan too keep up gobless your family have fan bro and more video tnx from Philippines but I'm work in qatar as a mechanic and I have some collection of rc nitro, gas and electric l love it bro more power to you and your family also all of friends up there. I'm only newbie ha ha ha for this hobby.
Dear Medic, I have that same drill. LOL
get in there!
WHOA, its totally morning here and I have the same kind of clock :O
your right fixin and customizing them is have the fun but its funner to customiz it when you got the money
dm question but do electric rcs need kill switchses to?
Okay, this video may be old but I can't help but notice your bad-ass class ring! You wear it in amost every video!
For get 400 videos , Go all the away to the "BIG 500" !!! You got my vote. RC RULSE!!
im changing my tires from 2.8s to 3.8s should i gear up my pinion and lower my spur or lower my pinion and gear up my spur
@TheHondakid25 You have to mix the fuel with two cycle oil . Not shure what amount per gallon
koblamo! gosh i love that word!
Im looking to upgrade the shocks on my Ofna Ultra LXone E 1/8 scale buggy to 16mm bigbore shocks. Do know if the Losi 8ight shocks will fit onto it. Its already a great racer i just want to make it a better race buggy. thanks any help would be nice
Hey,off the wall? ... How wld u rate the losi night Crawler? On a scale 1-10
Cool vid mate, should have pulled the rubber dust cover off the old switch and put it on the new one tho.
One question should I get a Tamiya Ford F350 high lift or a Axial SCX10
NIce!!!
If you're in the UK, get it from Wheelspin models, or give BMM Racing a call
@10:01 channel locks are meant to be turned the other direction so they grip better
I cannot get this sob to work with my brand new DX4S, I've tried everything!!! Stock receiver, I want to keep the stock one for the Telemetry.
what else r u planning to do to the truck?
May I ask why did you not just pull the wires of the switch rather than the motor engine?
Good video but how much coffee did you drink? Lol
djmedic2008 can you order that truck and if you can where. And is it just pure gas or do you have to mix the gas with something?
Hey Medic how much does this thing weigh overall?
you kind of remind me of Bill Ny The Science Guy lol keep doing what your doing