Killer RC Super B Kill Switch Install/Set up With The Futaba 7PXR
Жүктеу.....
Пікірлер: 28
@tonymanna9160 Жыл бұрын
Good stuff brother. That remote is really nice! Can’t wait to see her rip.
@eastsiderc
Жыл бұрын
Thanks Tony it is a nice one is better before as much as I paid for it but I didn’t get a super deal from Tower hobbies
@ostoura9945 Жыл бұрын
Very clean 👍
@eastsiderc
Жыл бұрын
Thanks bro
@bluegroovemodelsports9650 Жыл бұрын
Nice video. I was literally putting my rx and kill switch in my Losi 5t with a 7px as I seen this video
@eastsiderc
Жыл бұрын
Ha thats cool bro! Its nice radio once you figure it out!
@bluegroovemodelsports9650
Жыл бұрын
@@eastsiderc you get a chance to see my video on my Set up board build?
@eastsiderc
Жыл бұрын
@@bluegroovemodelsports9650 I saw it I loved it brother!!
@biged1703 Жыл бұрын
Hey son another very informative video. I’m sure glad I have you to do any technical stuff on my RC. I’m sure this will help alot of guys! 👍👍👍😎
@eastsiderc
Жыл бұрын
Hey Dad thanks man I love ya pop! I do anything you need done to your rc! I need to do your piggy back shocks this winter!
@moneyoverbeef Жыл бұрын
Thanks for alway contributing and give us great content. I been using the mod kill switch now I considering this for my new rig.
@eastsiderc
Жыл бұрын
This is a very good one, you would not be disappointed! Hes running a little sale right now too at killerrc.com
@Joes5thscalercandguns Жыл бұрын
Thanks my billet brother Jeff for showing me the kill switch setup looks like I gotta get lipo's and the 7pxr now in my rigs because I like that lipo speed. What charger are you using for the lipo's
@eastsiderc
Жыл бұрын
Well those servos are pretty fast even with regular NIMH batteries too. But the little reedy 2s lipo thats only 35 bucks from tower hobbies is an awesome choice! It lasts n lasts . I like lipo just dont drain them below 3.8 volts and you will never ever have an issue! And you dont need this expensive radio LOL it’s ridiculous and can be so complicated unless you want it. I had side job money burning a whole in my pocket when I got it and it was on sale for 100 bucks off so I Impulse bought it . And I use the charger Killer Rc sells its called the B6AC its a fantastic charger! It balances and discharges n all. You also dont wanna store lipos fully charged . Its good to discharge them to a storage voltage of 3.8 volts per cell. The charger does that too. And keep them in a ammo can with the lid cracked. I treat mine good and they have lasted me for years n years . And you are welcome brother! Im glad you liked the video
@islandrc-duke1972 Жыл бұрын
cool switch and install
@eastsiderc
Жыл бұрын
Thanks bro! It is a good one for sure! The owner of Killer Rc is very cool too!
@StoneFPV- Жыл бұрын
Great video! Thanks for showing your stand. I hope I didn’t make a mistake by getting a rovan kill switch for my Baja-Q. I’ve heard tons of good things about the killer b one but was hoping the rovan one would work good with a all stock rovan ya know. Guess I’ll find out when I get time to install it.
@eastsiderc
Жыл бұрын
Hey brother, you’re very welcome. Did you get the triton kill switch? If so, that is a good one I have used it one time before if it’s a rovan brand I have not tried that one but I hope for the best bro thank you for watching.
@StoneFPV-
Жыл бұрын
@@eastsiderc yeah it’s a rovan brand. I got it from fearless rc, part/item #RV63035. I need to quit being lazy and procrastinating and get it installed I’ve had it for a few weeks now.
@soblessed6438 Жыл бұрын
👍👍👍
@eastsiderc
Жыл бұрын
Thanks for watching. Love you mom
@vero6852 Жыл бұрын
Kind of a random question that doesn’t have anything to do with the video but what carb would be best for a 30.5cc for power?
@eastsiderc
Жыл бұрын
Hey bro a 668/997 or a 990. I prefer the 668/990 for two reasons and I will share why first is the choke on the 668/997 makes for easier starting but mainly because there is no nozzle in the air stream thus giving more CFM of air and secondly because the choke blade actually causes a pick up in air speed which in turn makes a scosh more power . The 990 has no choke and has a big ole nozzle sticking down in the air stream and is a highly over hyped carburetor. I hope that helps you brother but both will work fine. You can also use an 1107/1191 one in this engine but you will sacrifice a little low end and gain a little top end. Have a great night brother! Hopefully I helped you decide .
@vero6852
Жыл бұрын
@@eastsiderc wow! Thanks for the great info!! I really appreciate it and love all the vids! Have a great day👍
No i meant i programming it, ive now seen a 6v cut off is correct. I have everything wored up and connected but no matter weather i turn the killswitch on or disable it with the switches onboard it just keeps flashing green and orange. It says that means low voltage but i cant figure out why
Пікірлер: 28
Good stuff brother. That remote is really nice! Can’t wait to see her rip.
@eastsiderc
Жыл бұрын
Thanks Tony it is a nice one is better before as much as I paid for it but I didn’t get a super deal from Tower hobbies
Very clean 👍
@eastsiderc
Жыл бұрын
Thanks bro
Nice video. I was literally putting my rx and kill switch in my Losi 5t with a 7px as I seen this video
@eastsiderc
Жыл бұрын
Ha thats cool bro! Its nice radio once you figure it out!
@bluegroovemodelsports9650
Жыл бұрын
@@eastsiderc you get a chance to see my video on my Set up board build?
@eastsiderc
Жыл бұрын
@@bluegroovemodelsports9650 I saw it I loved it brother!!
Hey son another very informative video. I’m sure glad I have you to do any technical stuff on my RC. I’m sure this will help alot of guys! 👍👍👍😎
@eastsiderc
Жыл бұрын
Hey Dad thanks man I love ya pop! I do anything you need done to your rc! I need to do your piggy back shocks this winter!
Thanks for alway contributing and give us great content. I been using the mod kill switch now I considering this for my new rig.
@eastsiderc
Жыл бұрын
This is a very good one, you would not be disappointed! Hes running a little sale right now too at killerrc.com
Thanks my billet brother Jeff for showing me the kill switch setup looks like I gotta get lipo's and the 7pxr now in my rigs because I like that lipo speed. What charger are you using for the lipo's
@eastsiderc
Жыл бұрын
Well those servos are pretty fast even with regular NIMH batteries too. But the little reedy 2s lipo thats only 35 bucks from tower hobbies is an awesome choice! It lasts n lasts . I like lipo just dont drain them below 3.8 volts and you will never ever have an issue! And you dont need this expensive radio LOL it’s ridiculous and can be so complicated unless you want it. I had side job money burning a whole in my pocket when I got it and it was on sale for 100 bucks off so I Impulse bought it . And I use the charger Killer Rc sells its called the B6AC its a fantastic charger! It balances and discharges n all. You also dont wanna store lipos fully charged . Its good to discharge them to a storage voltage of 3.8 volts per cell. The charger does that too. And keep them in a ammo can with the lid cracked. I treat mine good and they have lasted me for years n years . And you are welcome brother! Im glad you liked the video
cool switch and install
@eastsiderc
Жыл бұрын
Thanks bro! It is a good one for sure! The owner of Killer Rc is very cool too!
Great video! Thanks for showing your stand. I hope I didn’t make a mistake by getting a rovan kill switch for my Baja-Q. I’ve heard tons of good things about the killer b one but was hoping the rovan one would work good with a all stock rovan ya know. Guess I’ll find out when I get time to install it.
@eastsiderc
Жыл бұрын
Hey brother, you’re very welcome. Did you get the triton kill switch? If so, that is a good one I have used it one time before if it’s a rovan brand I have not tried that one but I hope for the best bro thank you for watching.
@StoneFPV-
Жыл бұрын
@@eastsiderc yeah it’s a rovan brand. I got it from fearless rc, part/item #RV63035. I need to quit being lazy and procrastinating and get it installed I’ve had it for a few weeks now.
👍👍👍
@eastsiderc
Жыл бұрын
Thanks for watching. Love you mom
Kind of a random question that doesn’t have anything to do with the video but what carb would be best for a 30.5cc for power?
@eastsiderc
Жыл бұрын
Hey bro a 668/997 or a 990. I prefer the 668/990 for two reasons and I will share why first is the choke on the 668/997 makes for easier starting but mainly because there is no nozzle in the air stream thus giving more CFM of air and secondly because the choke blade actually causes a pick up in air speed which in turn makes a scosh more power . The 990 has no choke and has a big ole nozzle sticking down in the air stream and is a highly over hyped carburetor. I hope that helps you brother but both will work fine. You can also use an 1107/1191 one in this engine but you will sacrifice a little low end and gain a little top end. Have a great night brother! Hopefully I helped you decide .
@vero6852
Жыл бұрын
@@eastsiderc wow! Thanks for the great info!! I really appreciate it and love all the vids! Have a great day👍
How do i get it to 7.4 volt 2s lipo ?
@eastsiderc
6 ай бұрын
Tower hobbies sells it let me fetch ya a link
@eastsiderc
6 ай бұрын
www.towerhobbies.com/product/7.4v-2700mah-2s-reedy-lipo-hump-receiver-battery-universal-receiver/ASC27314.html
@lalshortshot2051
6 ай бұрын
No i meant i programming it, ive now seen a 6v cut off is correct. I have everything wored up and connected but no matter weather i turn the killswitch on or disable it with the switches onboard it just keeps flashing green and orange. It says that means low voltage but i cant figure out why