Great video, I used to run spectrum, not anymore. Too many issues. I stick with FUBATA now , never have a problem. Thou my daughter is still running a spectrum on her dbxl its range is extremely limited. We might convert it. Great job on your 5t! You have a great eye for detail! 👍

@alexperea20

5 жыл бұрын

Thank you for spending the time to watch the video of my Losi 5T I really love this truck it's been killing me that it's winter time and I can't drive it and honestly my Spektrum dx6r has been an amazing radio and it has serious range on it from my personal experience like I say Everyone likes their own version of electronics Futaba makes amazing radios also

@ddteamrc6461

5 жыл бұрын

@@alexperea20 thanks! It was a good video! Check out me and my daughter's RC projects if you get a chance! Thanks!

as for the servo hurn i use GTB there adjustable alot much more easeyer to set up

Very nice video big thumbs up my friend XD

@alexperea20

5 жыл бұрын

Thanks for the comment

Thanks for another great video you have really inspired me as I am new to the RC world. I have a brand new arrma Kraton And was wondering if you know the stock Differential wait? I am wondering what center death while I should use it seems like the front wheels a balloon really bad I often just bash around in the grass dirt street Thank you for your time

@alexperea20

5 жыл бұрын

Hey thank you for watching the video I really appreciate your comment and means so much to me I want to get that out of the way first I genuinely appreciate it the Creighton has 10000 weight front center and rear differentials in my cretan which I personally think is the best wait for it as of currently right now and if you watch some of my videos on that vehicle I'm not easy on it I Bosch it very hard what I run in the front and rear differential is 100000 weight differential fluid from Team Associated and in the center differential I run a 500K differential fluid from Team Associated and I also use 42.5 weight shock oil on all four corners what's the stock Springs I think that's the best setup for this vehicle I really liked it I really hope that helps if you have any questions at all please please do not hesitate to ask me I really appreciate your comment thanks again and have a great day

Does it work by losing connection (TX - RX). ?

Had a quick question for you about your vid and the kill switch. When you are activating the kill switch (led light off) isnt it supposed to activate full brakes too? I just got this killswitch and was wondering that it's supposed to do that. Thanks and what do you think of it now after install and functionality.

@alexperea20

4 жыл бұрын

No this Killswitch only kills a spark to the mall right does not apply the brakes you still have radio control where you can apply the brakes yourself

@moiseslopez9187

4 жыл бұрын

Ok seen this what's the difference here Watch "How to install a Dynamite RC kill switch in your large scale RC car" on KZread kzread.info/dash/bejne/k2VmzLSpeq-zl7g.html

I installed mine nd the red led is on nd I assigned a channel nd the light will flick on nd off when I pressed the channel but the engine wont be killed what's going on. Please help

@rtoebak76

5 жыл бұрын

Mine to. I don't get it. But when i do the sparkplug test it's working. No spark when light is off or no spark when the battery is taken out. Light on and i got a spark. Just tested it and this afternoon it was not stopping the engine. What's up with that? Is a running engine to much for the device and not when it's just a sparkplug test?

Just to let you know the 2 little things (red & black) are NOT Fuses they ARE Jumpers. Leaving them both off gives you No Low Voltage Protection, it does Not say you dont need the Jumpers with 7.4 volts. What it does say is that the input range is from 3V, 3 amps up to 20V, 16 amps. By removing both of the Low Voltage Protection Jumpers from the unit, you are removing all low voltage protection, which means if your servo battery dies, it's not going to kill the engine. So you are just removing another safety feature. Make sure that you are sharing correct information because it does Not say that you don't need them. READ THE INSTRUCTIONS THAT CAME WITH THE DYNE LRG SCALE SAFETY KILL SWITCH.

I got the same kill switch like you but I don't quite understand how you have to set the black and red plugs that are on the switch itself in order for it to kick in. Can you please help me out with this one?? I got scared Shit less when my Baja took off at full speed and resulted in a 160bucks repair

@alexperea20

5 жыл бұрын

It doesn't matter the polarity just make sure you have both those plugs plugged into the back for the Lipo cutoff

@hallobyebye699

5 жыл бұрын

@@alexperea20 I run a 4600mah nimh I don't feel comfortable with the idea that my beloved 5th can go up in flames

@alexperea20

5 жыл бұрын

@@hallobyebye699 I completely understand that they're very expensive but at the same time it all goes into how well you maintain your LiPo battery is how well you take care of them do you put them in storage immediately after being done using the vehicle most people don't do that they never put them in storage charge they run them till they barely have any voltage in them and then try to charge fully charged him honestly if you if you practice proper LiPo battery maintenance LiPO batteries are pretty much problem free unless you have a punctured lipo in some way

I think its a warning and caution video

you spend so much money on you 5t and look very much stock yet u cant by a lil servo extender to secure ur servo u need to adjust the end point on you controler so the servo stop that noice an see if can find a switchblade kill switch there better than that u using

Not the kill switch...the crapy radio system