this is how you do an instructional video. well done mate.

Wow new rider here and i am just trying to learn how to do maintenance on my bike. You are a wizard sir! thank you for this video, much appreciated!

I want to do my sprocket and tire change and have never wrenched on a bike and was nervous about removing the rear wheel. Thank you for the visual instruction. Keep it up, I subscribed and hope you show me how to raise the rear end

Thank you for the Awesome video. I learned alot today from watching you🤔. Great job! Keep the videos coming.

Wow I love it your video😍 Thank you for showing me how to repair R3 🙏🏻🙏🏻

i love these type of mechanical videos

@cillion5

5 жыл бұрын

Thank you.

Good idea on the wheel support.

Most satisfying Video

Bike looks crispy 😎

I have a question sir. Does your clip type chain as good as an oem in high speed. Coz im planning to buy 1 and i'm worried that it might break coz i've heard stories about clip type chains.

Are you using the "tool" to push/compress the link onto the pins so the master link will fit? Do the O-rings push the link back out if you don't hurry, or do they stay compressed? This was the "third chain" on this bike?

@cillion5

5 жыл бұрын

The tool presses the outer plate on the connecting pins. Slight interference fit so the 'x-rings'/o rings can't really push the outer plate off. Yes it's the third chain.

@bigwheelsturning

5 жыл бұрын

So the holes on the link are just a tiny bit smaller than the pins. Got it. Thanks. Good to see you kept the "safety ring" on the rear sprocket.

Great video! Thank you for sharing :)

thx from Colombia for doing this video

@cillion5

7 жыл бұрын

No worries.:-)

@fabriciocuencam.6207

6 жыл бұрын

Será aun mejor que fueras describiendo paso a paso lo que vas haciendo 😀👍

Brilliant video

@cillion5

6 жыл бұрын

I55SamS55I Thank you. 😀

Really good video

What kind of grease do you use on the chain at the end? What kind of sprockets are those? Thanks

Thank you brother.

What size bolt are the front sprocket cover? I need to get the tools for it

Only way is to use a link so much better for maintenance . As for the ugly chain derailer that's the first thing I throw out. Chain is a little tight but a great vdo for newbies that want to do there own maintenance nice one .

Isn't no problem on cutting the chain after installing it? I noticed by the video that both front and rear sprockets are JT, once front sprocket is 14 teeth and rear sprocket is 43 teeth and the chain is DID, is it right? If you could please tell me the chain specification, so I'll be based on it on my next shop.. Here in brazil the chain and sprockets kit comes with a big part of the adjustment "lost", my kit is 14.000 km now and has no adjustment anymore, so I'm searching hard for a good kit to my next change, so that it don't happen anymore. Thanks!

@cillion5

7 жыл бұрын

Fábio Bueno I bought the chain and sprockets separately. Chain is DID VX2 with clip link (rivet link was more expensive).

@fabiobueno4005

7 жыл бұрын

Ok. Thank you!

my good sir i like your vids very educational. one question....can those crazy rings be bought somewhere or is it ok to remove them...? mine is bent after hitting a flying brick...and its an eyesore...Master ! please advise!!!!

@cillion5

7 жыл бұрын

Phil Lee That I don't know. I assume you're talking about the chain guards around the rear sprocket nuts.

I noticed you left the chain tension adjusters in a way that the rear wheel axle sat all the way forward. Is that necessary to do? I have the axle tightened down and the chain adjusters tight so that exactly 3 lines are showing on each side to align the wheel. Can I size the chain to this and then adjust the tension afterwards?

@cillion5

7 жыл бұрын

M Modo I have four lines showing on adjusters. With a 112 link chain this provides good chain slack. The adjusters are about half way at this setting. Of course your mileage may vary.

you the master!

Good video! Neat idea with the ramp. Is that rear suspension aftermarket?

@cillion5

3 жыл бұрын

Yes it's an Ohlins unit.

I noticed the stock chain does not have a master link? Is there a way to remove it without cutting it? Btw nice video, you should make another on how to replace tires

@cillion5

7 жыл бұрын

Sam S you have to press out a pin. Chain cutting tools are handy.

What size front sprocket nut?

Tks man!

This is a great video! Have to replace mine soon so I will be referencing to this for sure. Thanks for sharing!

@thehouserc7

7 жыл бұрын

What size socket did you need to change the front sprocket?

@cillion5

7 жыл бұрын

Ricardo Contreras 29mm.

Nice. Tks.

What tools did you use and size sockets

Thank uou sir..

perfect!

Hi got a puncture in my rear wheel when fitting wheel back on do I need to check wheel alignment and chain tension and alignment ???

@cillion5

6 жыл бұрын

darnizel 14 I regularly check that stuff anyway. So yes, it's best to make sure it's all good.

Que tipo de trabador para el piñón de ataque?

Hey hi. I'm need torkque values bolts. Can you please on share me ?

Hey m8 could u tell me the torque spec of the front sprocket nut?

good video...

@cillion5

6 жыл бұрын

Mani kandan Thank you. 😀

Glad im not the only one who turns the nut to the left for the slight click noise then begin to tighten it. People give me shit for it.

Better than mine at 22000km totally worn

Just a quick question. How many kilometres had them sprockets done? And chain?

@cillion5

3 жыл бұрын

I'm guessing, but about 30-35k. I had already replaced the chain once as factory one stretched fairly quickly. Got about 15 from factory chain and 20 from replacement.

I notice you have the Pirelli Diablo tires, can I have your review about them? Are they better than stock?

@cillion5

7 жыл бұрын

Cristian Franco much better than stock. Feel confident all the way to the edge of the tyre. I'm only getting about 8-9 thousand kilometres on a rear tyre as I commute on this bike. Still worth it though.

@cristianfranco3278

7 жыл бұрын

Mine came with Michelin which are suppose to be good as well but i don´t feel very confident with them, did you change the size of the tire?

@cillion5

7 жыл бұрын

No, tyre sizes are the same.

Hola me puedes dar el torque del piñón pequeño y del grande. Saludos Calbuco Puerto Montt Chile

torque specs on Sprocket nuts??

Whats the torque specs NM on rear sprocket, engine sprocket, and axle?

@deedle6073

Жыл бұрын

Rear Sprocket nuts-68Nm/49ft lbs Front sprocket-75Nm/54ft lbs Axle nuts-57Nm/41ft lbs

@ikeresponteceso6189

5 ай бұрын

​@@deedle6073Sprocket nuts more tight than the axle nut?? whaaaat😂

removing and installing the 6 rear sprocket nuts are pain. and if you don't have air wrench, front sprocket will spin with you even though gear put in 1st so turn it fast as air impact wrench. and when installing rear wheel you will need some kind of woods like cillion5.

How many foot pounds of torque to tie down just the wheel?

@cillion5

5 жыл бұрын

I think it's about 48. Workshop manual has all that info.

What size is the socket for the front sprocket?

@cillion5

7 жыл бұрын

Phenomenal Rides 29mm. Not a standard size in most socket sets.

How many mileage do i need to change my sprocket and gear?

@cillion5

3 жыл бұрын

I think I had about 55000km on the bike when I changed these. I've changed chains about every 20-25000km.

Is that a sprocket from ninja 400? Looks familiar

@cillion5

3 жыл бұрын

No.

@eusebiomark956

3 жыл бұрын

@@cillion5 how many teeth?

At 9:50 whats the grease you put on the o rings there

@cillion5

Жыл бұрын

Grease packet that comes with chain.

goud¡¡¡¡!!!!!!!!!

Mi mt estira la cadena y las tuerce muy rápido

do you feel a huge difference??

@cillion5

7 жыл бұрын

Christian Arcos no, not really. reduction in chain noise and smoother sounding bike. Ratio's are the same.

@christianarcos4333

7 жыл бұрын

cillion5 I ask because a guy at the dealer ship told me this mod will make it faster.

@matthewreynolds5023

6 жыл бұрын

you will only make your bike faster if you change the tooth size on the sprockets... if you go with factory sprocket sizes you wont make it faster.

Is this a clip master link?

@cillion5

3 жыл бұрын

Yes. Don't need rivet link. Clip link strong enough for engine size.

@ilovepizza8263

3 жыл бұрын

@@cillion5 cool thank you.

i didn't know that chain link can be use in the r3 ..

not into silent movies

@shawnmclean7932

Жыл бұрын

I am. It's international.

Hey what rearsets are those ?

@cillion5

7 жыл бұрын

Steven Vandeyar cheap eBay ones from China.

@stunt514

7 жыл бұрын

cillion5 do you by chance have a link? I had got a pair off eBay but it doesn't push back as far