Service your Yamaha YZF-R3 at Home. Step By Step Tutorial.
Oil and filter change on my 2022 Yamaha YZF-R3. These simple services should be done at home, it won't void your warranty, it costs WAY less, you won't need special tools, just a 12mm Spanner or Socket.
I take you through step by step how to get this done, it really is simple, anyone can do it at home and save a hundred dollars or more.
Just make sure you use the recommended oil and filter.
1. Run bike for a few minutes
2. Remove sump lug
3. Remove Oil Filter
4. Stand bike up straight to drain oil
5. Prime Oil filter
6. Fit new oil filter
7. Replace sump plug
8. Fill bike with new oil
9. Stand bike up straight to check oil level
10. Start bike and check for leaks
11. Reset Oil trip meter
Пікірлер: 49
I knew working on my wank arm would come handy one day
@AussieMoto
Жыл бұрын
It’s not because we want to, it’s because we have to. 😂😂
Typical Aussie Dad!! I love it 😂😅
Easy tutorial no bs! Simple words nice video mate !!!! 🤝❤️
@AussieMoto
Жыл бұрын
Thanks mate, much appreciated.
I had to buy a filter wrench because the previous owner of my r3 torqued it to well over 100nm for some reason, same to the sump plug so had to replace that too 🙃
@AussieMoto
Жыл бұрын
That’s a fair enough reason to use a filter wrench, you’re excused! 😂😂
This is the video that convinced me that I can do it myself too! Ordered my oil change package last night and can't wait to do it. Thanks mate.
@AussieMoto
5 ай бұрын
How did it go? No dramas i’m sure?
@lukezhang3715
5 ай бұрын
@@AussieMoto Was worried a bit that I might need a grip strengthening tool and a few weeks to unscrew the filter, but turned out OK. Everything worked fine in the end😃
Thanks mate this is bloody awesome! 🤣
Thankyou so much, it's so easy & I am definitely doing my own oil & filter changes myself from now on!!!!
@AussieMoto
Жыл бұрын
My pleasure!
Thank you!
great videos mate!!
@AussieMoto
Жыл бұрын
Thanks mate!!
Loved those safety gear sandals! I just traded my 2011 CBR250R for the “bike of my dreams”, a 2022 R3 60th Anniversary Edition. Wow. I love it. Just under 1000 kilometres in just over a week. I plan to do all the servicing myself but am sitting on the fence for the first service and may take it to my local dealer for that one. Great video! Subscribed.
@AussieMoto
5 ай бұрын
Bloody beautiful!!!
Nice
Thanks man💪🏽
@AussieMoto
Жыл бұрын
My pleasure!
appreciate it brotha!
@AussieMoto
Жыл бұрын
Thanks mate! My pleasure.
good job
@AussieMoto
Жыл бұрын
Thanks!
As much of a man that I am, this filter shit is tight af
@AussieMoto
5 ай бұрын
😂 bro sometimes they are too tight, but it’s fun to stir people up from time to time.
Your sense of humor alone have me cracking up😂.. #BeAMan
I was about to change the oil because the indicator window showed there was no oil but I didn't know it needed to be upright to show the right amount 😅😅
guitar and bike. u r me!! 👍
@AussieMoto
Жыл бұрын
Haha thanks!!
where do you dump the old oil?
Great video but what do I do with the old oil and filter? I heard you can recycle the oil some places but can the filter just go in the dumpster?
@AussieMoto
5 ай бұрын
Drain the filter for a couple of weeks, upside down, into your oil drain pan, then it can be thrown away. Or talk to your local mechanic and see if they mind you dumping a couple litres with them every now and then.
Should i take in my bike for the 4,000 mil(5,000 km)service? Or should I do it myself?
@AussieMoto
5 ай бұрын
Get into it and service it!! If you’re unsure then book it in but it really is as simple as I show in this vid.
Hi there, I have a 2023 R3 which I bought new and the oil light came on just after 1000 KM, any pointer of what could be the issue or recommendations.....Thank you
@AussieMoto
5 ай бұрын
The R3 oil light comes on after a pre-determined amount of k’s not because the oil is low. It comes on to let you know you’re due for a change.
@kushpaladin
3 ай бұрын
change the oil sooner during the first oil change. your oil will having little specks in it, basically metal shavings from breaking in the new engine. it clears up after that first oil change
I bought a new R3 and the dealer didn’t give me the Manual book
@AussieMoto
5 ай бұрын
You can download it, just google it.
@kushpaladin
3 ай бұрын
what u need the manual for? my manual says the oil filter needs 17 N.m (13 ft lbs) and oil drain bolt needs 20 N.m (15 ft lbs) but i never torque them. i just tighten with an adjustable wrench
U r hilarious dude loll
@AussieMoto
5 ай бұрын
😅 thanks mate. 👊
How many litres do you need to do a oil change??? Awesome video!!!
@AussieMoto
Жыл бұрын
2.3L is all she needs. (A little bit less if you’re not also changing the filter - but it’s easy and cheap so you might as well always do filter.)
some one know about it the torque on sump lug
@kushpaladin
3 ай бұрын
tbh torque isn't necessary just tighting it is enough but manual says oil filter = 17 N.m (13 ft lbs) and drain bolt = 20 N.m (15 ft lbs)