How To Replace Motorcycle Chain and Rivet Master Link
How to replace your motorcycle chain and how to break, press, and rivet a master link.
PLEASE VIEW DISCLAIMER AT BOTTOM OF PAGE
RK Chains Homepage:
rkexcelamerica.com/products/r...
GREAT PLACE TO BUY CHAINS AND TOOLS:
www.sportbiketrackgear.com/
Motion Pro Tool:
www.motionpro.com/c/chain
RK Chain Tool:
rkexcelamerica.com/products/c...
Bikemaster tool:
bikemaster.com/bikemaster-hea...
DISCLAIMER!!!
Due to factors beyond the control of Nick Buchanan Racing, I cannot guarantee against improper use
of this information. Nick Buchanan Racing assumes no liability for any property damage, injury, or death incurred as a
result of the information in this video. Use the information in this video at your own risk. Nick Buchanan Racing makes
no guarantee of any particular result that can be achieved using the information in this video. Nick Buchanan Racing
recommends taking all necessary safety precautions when working on motorcycles, working with tools, and operating motorcycles.
Nick Buchanan Racing recommends following all manufacturers recommendations and local laws. Any damages, personal injury,
or death, as the result of the information contained in this video is the sole responsability or the user, and not of
Nick Buchanan Racing. I am not an expert technician or qualified instructor of any kind.
This video is for entertainment purposes only.
Пікірлер: 112
no no no....incorrect use of chain tool, the outer plate should not be pressed on with the rivet head.....the chain should sit in the tool and the press plate is used to press on the side plate
Even without cracking, if you flare the rivet too much then the link will bind. Definitely read the installation specs for your chain/master link and measure as you go to make sure you don’t go past that. I wouldn’t just measure the pins on the other links since they obviously aren’t the same and may not be the same spec.
i've watched a ton of videos and the only thing couldn't figure out was the riveting tool. you showed it and explained it PERFECTLY.
Once you've broken the chain you can use to old to pull through the new one, if you're not changing sprox too. ;-)
Not right in so many ways..
Can I just buy a clip master. They have never failed me since I was 9 years old to 40 yrs old. I’ve never had a clip style fail in all my years even in sand mud and dirt n water.
Bro your rivets doesn't have to be exact same thing as factory ones so dont waste time
To remove the chain, I just use a grinder and cut it completely. No need to keep anything anyway so I don’t waste time pushing the pins.
Using the tip for pressing is NOT the right way.They sale a plate with 2 holes you line it up and turn slowly.This way both sides are evenly pressed.This ghetto version is prone to fail then you have to order another rivet link at 10 dollars and wait 5days...Do it right 1st time buy the correct tool!
I have just a small crack on the side of one of my rivet pins... do i have to change master link? What is your opinion, thanks...
10 out of 10 recommendation. Great video. Very informative and detailed step-by-step process thank you for your help.
Thank you for this detailed video!
Excellent and detailed instructions! 👍
best video i have seen on this
Excellent video. My favorite by far.
Good video man. Very handy info. 👍
Great detailed video
Great video
Perfect video explaining
This was EXCELLENT ! thank you. edit: subbed.