My Man, 11.17 is rocking it!!! Great run and that MPH is awesome too. You may be the first guy to go into the 10s in a Model 3 Performance.

@LearningFast

Жыл бұрын

It won't get into the 10s with me in it. I weigh to much. It is going to take a sub 100 lb driver and a lot of interior sound deadening removal that I am just not willing to do. Hopefully someone else will see this video and get inspired to do it. 11.17 is probably the fastest I will ever go in it. It takes too much work to go faster than that.

@letsgobrandon5800

Жыл бұрын

@@LearningFast Regardless, you're knocking on the door of high 10s which is amazing for a Model 3 Performance. Just get a girlfriend or sister to run it down the track. If you're not racing anyone, the tree lights don't matter. They can just hammer it and go!! As an aside, those Plaids are ridiculous. Tesla Plaid Channel regularly goes into the 9.1 xxx

@LearningFast

Жыл бұрын

@@letsgobrandon5800 each tenth gets harder and harder to gain. 100 lbs weight reduction might get you a tenth at 12.0 but it might take 150 lbs to get from 11.17 to 11.07 and perhaps another 175 lbs to get into the 10s from there. We shall see though. For less than $60k this is a reasonably quick car. I still can’t beat any of the top 10 Kia Stingers though. Pretty crazy how fast cars have become.

@letsgobrandon5800

Жыл бұрын

@@LearningFast The Stingers are junk. A few runs down the strip and some mods and they're breaking. Look how many runs you've made and not a single breakdown.

@LearningFast

Жыл бұрын

@@letsgobrandon5800 I had two Stingers before the Tesla. They aren’t junk. Yes, they aren’t a BMW or Acura but they are really good cars for what I paid for them. The Tesla definitely is reliable in terms of powertrain. It is just so simple that there isn’t as much to break. Those Stingers are pretty fast though. My friend has a 2018 GT2 Stinger in the 10s that he has raced for almost 4 years now. Still going strong. That is fairly impressive for a $45k car when he bought it.

2.8 to 60 is impressive!

@LearningFast

Жыл бұрын

It is plenty fast enough for me. Car pulls really hard on pretty much any surface.

Model S Plaid is just so funny to watch. I'd be happy to lose to it and just have a laugh by watching how hilariously fast it takes off

You deserve the plaid. And it would be awesome to see more plaid channels.

We need a Model 3 Performance + with more top end. Get me in the mid/high 10s like a P100D

@LearningFast

Жыл бұрын

It won’t happen. Musk was directly asked if he would ever do that and he said no. He said they are focused on making the Model 3 as simple as possible. Model 3 has to be a volume car for their goals. Instead we can unlock 40+ HP by preconditioning the battery and use smaller and lighter wheels.

@borinvlogs

6 ай бұрын

@@LearningFast New Model 3 Performance Highland is expected to have 2 carbon sleeved motors from the Plaid to have higher top end.

@LearningFast

6 ай бұрын

@@borinvlogs it won’t have any Plaid motors. There is no need for that. Just the Model S LR motors would be enough.

@ms3ben

3 ай бұрын

@@LearningFast Not a Plaid version, but the new 24's M3P just released looks like its going to have more respectable top-end pull and quicker off the line!

@LearningFast

3 ай бұрын

@@ms3ben I should get mine in a few weeks.😉

Nice runs, i know it’s hard to low down time on 1/4 mile. Weight reduction is the only way we can do it. 👍

Sheesh i didnt know model 3s were capable of 120+mph trap speeds how in the world at 3950lbs did u manage that! Thats only like 100lbs less than stock, what that with u in it?

@LearningFast

2 ай бұрын

I actually took about 200 lbs of weight out of it. Mine weighed just over 4,100 lbs stock. I got it down to just over 3,900 lbs. My 2024 Model 3 Performance gets here this week. It should run 125+ mph in the 1/4 mile and be in the 10s.

I want to remove my front right seat but can't figure out how the seat belt is removed from the floor can you help. Been looking all though the web and can't find out how. Was told there's a special tool . that didn't help where is the tool LOL.

@LearningFast

10 ай бұрын

You can find a tool on Amazon to remove the seat belt really easily. Then just unplug the wiring harness from the passenger front right footwell.

Thanks for the help on the tool, one more question ,what tires are you using on yours?

this is all possible without voiding any warranties right? you just have to reassemble anything you took out of the car, aka back seats etc right?

@LearningFast

11 ай бұрын

Nothing I have done to the car should void any warranties. It is all reversible.

How can you know the battery temp when you do the preconditioning before the drag races?

@LearningFast

Жыл бұрын

S3XY buttons from Abstract Ocean. They do so much more than just that but their app is terrific for showing you data from the car. abstractocean.com/collections/all-model-3/products/s3xy-buttons

@raz00z

Жыл бұрын

@@LearningFast does this device effect the car warranty after installation?

@LearningFast

Жыл бұрын

@@raz00z it is the same thing as plugging an OBD2 reader into any other car.

what has been your fastest 60-130?

@LearningFast

Жыл бұрын

I have never had the car over 124 mph. Just not enough room at the track to do it and I don’t race on the streets. The single speed transmission in this car really limits its 60-130 mph capabilities.

How are you heating the battery?

@LearningFast

Жыл бұрын

Set navigation to the nearest supercharger and it will typically Preheat the battery for about 15 minutes. I have the S3XY buttons so I can turn on and off Preconditioning at will.

@daniloreyes2

Жыл бұрын

@@LearningFast link for the button

@LearningFast

Жыл бұрын

@@daniloreyes2 abstractocean.com/collections/all-model-3/products/s3xy-buttons

@borinvlogs

6 ай бұрын

@@LearningFast do you need to sit in the car while it is preconditioning? can i just send supercharger destination from phone to car or just go to the car put supercharger as destination and come back inside the house?

@LearningFast

6 ай бұрын

@@borinvlogs you have to be in the driver’s seat and press the brake pedal at least once. It is for safety that you have to be in the driver’s seat.

any 60-130 times or 62-124 times?

@LearningFast

Жыл бұрын

Best I can do is 60-120 mph. That was 8.16 seconds. It really isn’t pulling hard enough above 100 mph to get to 130 mph at the Dragstrip. I tried roll racing at the track and I hit the exact same speed(122 mph) before I had to slow down. A single speed transmission is not affective for high speed runs.

@fishie2295

Жыл бұрын

@@LearningFast oh my bad

@fishie2295

Жыл бұрын

@@LearningFast is sub 3 0-60 possible on the streets

@bigboibenz

Жыл бұрын

@@fishie2295 With the 483bhp update and a preheated battery, yes.

@nickolassnielsen

Жыл бұрын

@@bigboibenz Which update gives more HP?

😏 ρгό𝔪σŞｍ