ps3 super slim shuts off by itself - fix -
ps3 super slim
ps3 turns off immediately after turning on
ps3
ps3 repair
ps3 super slim liga e desliga
ps3 shuts off after turning on,
ps3 shuts off randomly,
ps3 shuts off immediately,
ps3 shuts off by itself,
ps3 turns off after 3 seconds,
ps3 turns off after turning on,
ps3 turns on and shuts off,
ps3 controller turns off by itself,
ps3 super slim shuts off by itself fix,
ps3 slim turns off by itself,
why ps3 turn off by itself,
ps3 shuts down immediately after turning on,
ps3 turns off immediately after turning on,
ps3 problem turns off itself,
ps3 fat turns off immediately after turning on,
ps3 slim turns off immediately,
ps3 super slim shuts off immediately,
ps3 starts and shuts off immediately,
ps3 powers on then shuts off,
ps3 switches off immediately,
ps3 auto turn off problem,
ps3 slim shuts off,
ps3 starts then shuts off,
why does my ps3 keep turning off,
my ps3 keeps turning off,
ps3 switches on then off
Пікірлер: 80
Love you bade bhai ❤️ ♥️ 1 number
can you tell me , when using reflow what tempreature should i maintain for rework station
Very nice 👌 👍 bhai Kaash aap india se hote To me aap se jaroor milta or kuch shikta bhi aap se hardware me....
Hi. Do you know if LAN IC and bt/wifi card share the same power supply? (regulator) I have a super slim that has both wifi/controller and LAN intermittent problems. Sometimes the LAN works, sometimes the controller can connect wirelessly. Most of the times when I try to change something in the internet connection settings, the whole console freezes. Thank you.
love your work
@idreestech
Жыл бұрын
Glad you enjoy it!
Thank you for sharing. How long will this last? Would it have been better to reflow using your excellent BGA rework station?
@idreestech
Жыл бұрын
How long will this last, not sure but still testing it, and it is stable, It was turning itself on sometimes so I do not need reflow on the BGA machine?
@ceejay_gaming9636
Жыл бұрын
@@idreestech can this work on the PS4 as well ?
how TO HOT gun teprejar and AIR SET
Master the core A gaming video is up and your in it😊😊😊
@idreestech
Жыл бұрын
Link?
@rex2ducky837
Жыл бұрын
@@idreestech kzread.info/dash/bejne/nmaHs8mjidC8ibw.html
We are missing your videos and obviously you as well lol.
Great video. Master what is the name of tool you use for measuring resistance, and how can I differently the fake and original ones
@idreestech
Жыл бұрын
All are with the same circuitry. Its name is SMD component tester.
I have question, sir,, about what brand name of thermal paste can be use? Or any recommend?
@idreestech
10 ай бұрын
Arctic Silver MX4 the best.
Where do you get the 2 heat sinks is it costom made
@idreestech
Жыл бұрын
The two heat sinks are the part of two old scrapped GPU cards.
Thanks a lot for your interesting video. I kindly ask you if you can tell with video to see for a ps3 super slim where you tell about all resistors that is showed into this video at 02:32 (the one on the left of Blu-ray connector). In this video you test only some of the resistors but on my console I discovered a shorted one on the bottom and I need to know the correct value Thanks in advance to everyone who can help me
@idreestech
Жыл бұрын
The resistance could not be short. May be its value is as it shows.
If using a copper plate to put it to push it tighter, can you?
@idreestech
Жыл бұрын
Dear, the question is not straightforward.
@idreestech
Жыл бұрын
It can cause a short circuit, so it should be of a non-conducting material.
Could you repair my ps3 super slim. It does the exact same thing I just don't have any tools to repair I've tooken it apart just don't know the problem
@idreestech
Жыл бұрын
Why not?
@denzelparker5139
Жыл бұрын
How can I send it to you
Tell me about the pre heat temprature sir and how to find cpu on my slim ps3
@idreestech
Жыл бұрын
380 degrees and a half of the total air or medium airflow. The RAM attached to the chip is a CPU.
@legendforever7036
Жыл бұрын
@@idreestech thanks
@idreestech
Жыл бұрын
@@legendforever7036 UWC.
@legendforever7036
Жыл бұрын
@@idreestechthanks so much again sir
master.selamun aleyküm, how many minutes should we apply the hot air gun to the chip at 380 degrees Celsius. What should be the average time. When we use the preheating plate, what should be the preheating degree of the lower plate. And how many minutes should it warm up. Then I will continue to heat it with a hot air gun from the top. Let me keep the temperature. I have a temperature measurement probe. At what degree does the CPU temperature reach fluidity again.Thanks
@idreestech
Жыл бұрын
Dear, never use the Hot Air Gun for this purpose. It is dangerous for a PCB to heat a specific area. First, preheat the whole motherboard at the same temperature for about 10 minutes. then try a reflow of the specific chip.
@ahmetahmet8448
Жыл бұрын
@@idreestech thanks sir.
@ceejay_gaming9636
Жыл бұрын
@@idreestech What is the appropriate temperature for pre heating ?
@idreestech
Жыл бұрын
380 Degrees
was that 210 degrees F or C?
@idreestech
Жыл бұрын
380 degree
Khair howe ne.
Sr mein bilal kasur wala mera playstion 3 repair kiya hai ke nahi ager nahi tu mera playstion wapis kardo aur apka no q band ja raha hai please reply my massage.
@idreestech
Жыл бұрын
Soon now, dear, I have started working again.
When will you repair my PS3 slim 500gb from Karachi
@idreestech
Жыл бұрын
Soon now, dear, I have started working again.
thanks for sharing what is this chip called in 2:24 ? or it's name plz
@idreestech
Жыл бұрын
Please google it with the said chip number.
@ubtech2938
Жыл бұрын
@@idreestech i think you didn't say the number and it's number is not visible on the camera
@idreestech
Жыл бұрын
@@ubtech2938 Please join me on Facebook.
Well done mr idress can you do a vedio on how to test ps4 & ps3 Processor with multymeter on diode mode ❤
@idreestech
Жыл бұрын
Ok
@ubtech2938
Жыл бұрын
@@idreestech thank you so much teacher . god bless you big respect from iraq 🇵🇰❤🇮🇶
nice
@idreestech
Жыл бұрын
Thanks
reball with hands is possible.👍
@idreestech
Жыл бұрын
Yes possible, but it took so much time.
Interesting video
@idreestech
Жыл бұрын
Glad you think so!
@BilalAhmed-hc5vm
Жыл бұрын
Sr your number is off what's proplam the
heat gun temp ?
@idreestech
Жыл бұрын
380 degrees.
@victornesphory7045
Жыл бұрын
@@idreestech air flow setting on blower please both on 210C &380 C please
Hello, Thanks the video! What is this: 9:10?
@idreestech
Жыл бұрын
It is the Flux paste that helps in a reflow process.
@elims_hun
Жыл бұрын
Thank you so much!! I try this method (without flux paste),but not good.Same problem.. I buy this paste. Thank you!!
I am also facing the same problem wit my ps3
@idreestech
8 ай бұрын
Good luck!
Is it possible to send it to you? Because I've tried everything and its still giving me issues.
@idreestech
25 күн бұрын
Yes, please feel free to send it to me.
@Tinny-ji6uh
25 күн бұрын
@@idreestech Nice! So how much Is it gonna cost me?
@Tinny-ji6uh
25 күн бұрын
Or can I send you the details about what is happening with it?
@idreestech
25 күн бұрын
@@Tinny-ji6uh Country you belong?
@Tinny-ji6uh
25 күн бұрын
@@idreestech South Africa
Same problem in my ps3 super slim but i live in pakistan not any type electronics master
@idreestech
11 ай бұрын
Dear! I am in your native country.
Excellent!
@idreestech
Жыл бұрын
Many thanks!