The level of laziness using an air ratchet to take the battery terminal off. I adore you

@maxautouk

Жыл бұрын

If a power tool fits. It gets used. 😂

@henryleander835

3 ай бұрын

Time is money.

@maxautouk

3 ай бұрын

Dam right

@julianducros8952

2 ай бұрын

En you have been doing this job for many years your hands kill anything to make it easy

Great video, thanks for taking the time to clearly explain the job along with all the tips👍

@maxautouk

Жыл бұрын

Glad it was helpful!

Very good video. All video's should be made like this. Good job👍🏼 and thank you!

@maxautouk

7 ай бұрын

That’s very kind thank you!

Im just knew that peugeot engine timing belt should be wet and not dry after watched this video. thanks sir

@maxautouk

Жыл бұрын

Glad it helped

Good job 👍🏼

@maxautouk

4 күн бұрын

Thank you!

Thank you for the great video!! I have C3, 2016, 1.0 68hp bought with 7k km, now at 27k km. So far I have had no issues at all with the car. I am thinking of changing the belt just because it is old. Two questions: Can I figure out, if it was already done because of recall? It was a leased car, so at least the first 3 or 4 years it was at Citroen... 2. In the comments you are saying it is a bad motor, would you advise to just get rid of it as fast as possible or would you say if I change the timing belt then the cause of error is banned and good to go again for another few years? Thank you for replying!❤

@maxautouk

9 күн бұрын

The Puretech engines are capable of doing high mileage and being reliable, the trouble is that when they do go wrong the repair bill is extreme! To do what you see in this video with good quality parts from main dealer and the labour at most garages could set you back 1000 pound depending on the area

How long would you say it takes to just replace the rocker cover gasket and if I'm going through all that trouble for an oil leak shall I go the full way and have the cambelt changed at the same time if it doesn't look to bad....

@maxautouk

10 ай бұрын

Without videoing it I’d probably take an hour just to do the gasket… wouldn’t be a bad idea to change the Cambelt they are horrifically unreliable on these engines

this solution is not problem as long as you do your service at time and every oil change guys clear the filter... i am using croslland almost 200.000km, 3x chanfe time belt and no problem..

@maxautouk

2 ай бұрын

This is a recall from PSA (when it was still PSA) because the batch of belts fitted to this particular engine are known to snap. There is an improved belt material which is fitted instead to resolve the issue! That is why many other puretech engines have no issues at all because they arent part of recall!

@filipkrstevski5449

Ай бұрын

At what mileage was this car the sump is not so dirty

@maxautouk

Ай бұрын

@@filipkrstevski5449 40k

@adriancarter825

Күн бұрын

I have a 71 plate Crossland that has a really bad belt full of cracks it has been serviced as it should be it’s back in at dealer Friday and hopefully they will change belt under warranty , these engines are the worst design ever ridiculous the work that is needed to change these belts ,

@maxautouk

Күн бұрын

@adriancarter825 youd think they would fix it somehow or manufacture a better quality part

I've got a bearing noise sounds just like the alternator bearing have gone but its notvthatvor the welt belt pulls any ideas im thinking oil pump?

@maxautouk

2 ай бұрын

Im afraid without hearing it for myself in person i have no idea what to suggest sorry!

Hi great video can you please tell me where the PCV VALVE is thanks

@maxautouk

10 ай бұрын

I must admit I’m not a hundred percent where it is located sorry - this is a customer at and I don’t have access to it soo can’t check

Great video How many kilometers should the timing belt be changed?

@maxautouk

4 ай бұрын

If its the original belt then immediately they are known to cause issues

@devoosdude9809

Ай бұрын

Did they fix it tho? Can I buy it from official dealer?

@maxautouk

Ай бұрын

Yes you can buy it from main dealer Sometimes the bits of timing belt also damage the vvt, oil pump and block the pick up tube

Will also need to clean the wire screen, at the end of the engine oil pick up tube, in order to complete this job?.

@maxautouk

Жыл бұрын

Only if the belt has started to break up 👍🏽

thanks

@maxautouk

10 ай бұрын

No worries!

What part of the country are you in? Need belt doing on my sons car.

@maxautouk

11 ай бұрын

Brookeborough, County Fermanagh where are you?

I'm about to buy a used Peugeot 208 e-thp 1.2 , 110 hp. 2019, 95000 km. But im really sceptical after all those negative comments that ive recently read about this engine. My mechanic is going to check everything, plus check the full history service book. Should i avoid it, even if everything look good?

@maxautouk

Ай бұрын

Yea definitely avoid them they are genuinely terrible engines. The one in the video had full dealer service history and three cambelts in four years!!!!

@giorgosbaz

Ай бұрын

@@maxautouk thanks a lot. Really valuable information. Is there any version of 208 engine reliable that i should look for ?

@maxautouk

Ай бұрын

The 1.6 HDi is ok

@giorgosbaz

Ай бұрын

@@maxautouk hard to find, maybe i ll check for a Clio, like an 0.9 tce engine. I hope that is more reliable.

Is number one piston at tdc i dont have tool for timng

@maxautouk

9 ай бұрын

It is possible to do the job without the use of timing tools but I do not recommend trying this approach because a mistake could cost you an engine - I suggest you buy the tool… it is cheaper than a new engine 🫣

Hi there how much is the labour for this job ?

@maxautouk

7 ай бұрын

I could say it depends very much on where you live but in my area easily £400 on labour, maybe more

Bu araç kaç model, kayış kaç km’de değişti?

@maxautouk

9 ай бұрын

This the 1.2L petrol puretech engine and this timing belt had only done 15,000km

GREAT VIDEO /IT WOULD BE EASIER IF YOU TOOK THE FIRE PANNEL OUT/ TWO WIPERS SOME PLASTICS AND FEW SCRUES

@maxautouk

6 ай бұрын

I think underneath the cowling is just a scuttle tray that is welded to the body so you wouldn’t actually gain any more space

The later Cambelt pulleys have a raised edge on the outer part of the pulley. So you don't have the clearance for the belt to fit through. I had to remove the inlet pulley as to get the old belt off and new one on.

@maxautouk

11 ай бұрын

Thanks for the comment information is everything! What year is yours?

@pjw1109

11 ай бұрын

@@maxautouk 2018 peugeot 2008.

@pjw1109

11 ай бұрын

@@maxautouk i work at vospers so work on peugeot and ford

@maxautouk

10 ай бұрын

Sweet, extra information is always mega helpful

Awesome video, really really appreciate it, could I possibly run something by you? I have a Vauxhall Crossland same engine and its throwing up the low oil pressure fault, and the car is going into limp mode! So what ive done so far is remove the sump to see for blockages in the pickup and to be fair it wasnt terrible, there were some micro fibers which ive removed, i also changed the filter and oil but the fault is still there? The belt does have micro cracks all over it and i will replace it using your videos as a guide, but i fear just changing the belt will not rectify the fault? Is there something else I'm missing? When i plug it in its coming up with oil pressure solenoid valve circuit low? Any help from you would so appreciate.........

@maxautouk

8 ай бұрын

Did you remove the pick up tube completely?

@JohnDoe-rf4td

8 ай бұрын

Thank you so much for the reply! Really appreciate it. The pick up is slightly different on mine, My one doesn't have the black pipe/funnel thing! My one looks like this kzread.info3FU03Dxo7YM?si=kmrB6MOwcr1kxKVb

@maxautouk

7 ай бұрын

Is the seal on the pick up tube damaged ? Because that can create oil pressure problems too

@JohnDoe-rf4td

7 ай бұрын

Can i ask where you're located? Is it a job you could do? Could I possibly take a number? Regards

@maxautouk

7 ай бұрын

@@JohnDoe-rf4td I am located in Northern Ireland in a town called Brookeborough - where are you?

Stupid wet belt. Real pain in the wotsit.

@maxautouk

Ай бұрын

Yeah not a great design is it

Actually mindblowing to me that timing belts are still a thing. So stupid

@maxautouk

6 ай бұрын

Unlike a chain they don’t stretch and slowly make the engine run worse but this timing belt set up in particular is an absolute joke 🫣

@luresforall

6 ай бұрын

I guess they will stretch but since you have to replace them so often​, you don't notice it as much. Chains are superior, don't want anything else @@maxautouk

@maxautouk

6 ай бұрын

@luresforall and can save you some time and money!

What a misery.....

@maxautouk

2 ай бұрын

Not a great engine

DO NOT BUY 3 CILINDER ENGINE CARS !!! These are JUNK !

@maxautouk

5 ай бұрын

They do seem more prone to go boom!

French car technology.......:-/

@maxautouk

10 ай бұрын

Not great in this instance…