You're the man Denis! My neighbor gifted me this exact reel the other day, It has been sitting in a storage unit for about a decade and It had a bit of tarnish on it and was very dry inside but overall its in great shape, After watching this video and working through the process step by step i have it working like its brand new, Thanks a ton for the video!

@2ndChanceTackle

Ай бұрын

YW - Glad to have helped give that reel a 2nd Chance - Dennis

Thanks a bunch for this and your other videos. I took apart, cleaned, and lubed my late grandfather's 112h from your video on it, and this one will be next. I inherited several old reels from him and these videos are going to allow me to put them back into service. Thanks again... these are top notch!

@2ndChanceTackle

4 жыл бұрын

Glad I could help. Please subscribe to see more to come - Dennis

Couldn't have done my service without this video. You are the man! Thank you!

@2ndChanceTackle

3 жыл бұрын

Glad I could help. Thanks for the kind feedback and for watching - Dennis

This was immensely helpful! My anti reverse dog spring wasn't properly set by a previous owner, and I was able to identify and reset the mechanism. Thank you!

I was able to service my 209 thanks to you. It feels like new and I didn't even lose the dog spring, although I shudder to think what would have happened if I tried this on my own without these clear instructions. Thanks!

@2ndChanceTackle

3 жыл бұрын

Great to hear and glad to help. Please let your fishing friends know of my channel. Best wishes - Dennis

Thanks for your the videos they helped me get my Grandfather's Penn Peer 309 and 209 cleaned up and serviced.

@2ndChanceTackle

4 жыл бұрын

Glad to hear it helped. Best wishes for great fishing. Thanks for watching - Dennis

thanks for this -- friend just gave me a Peer 209 to clean & lube. Delighted to find you already have a tutorial ready!

@2ndChanceTackle

4 жыл бұрын

Glad I could help! Best wishes on the tune up. These reels are very strong and will last when properly maintained - Best wishes - Dennis

If everyone else is like me, the current 16.6k views are from about 35-50 people that just watched this over and over again while rebuilding. I bought this reel from my neighbor maybe 20 years ago and after using it a few times it has just been sitting. Finally pulled it out from behind everything and got it apart and cleaned up. The anti-reverse pawl had some wear so got another one coming before it goes back together. Thanks for these videos!

@2ndChanceTackle

3 жыл бұрын

You are welcome. There were a lot of these reels made and everyone needs to be serviced. Thanks for the note and for watching - Dennis

Sent my 209 to Dennis because of this video. It was my Dad's flounder reel and is at least 25-30 years old and has not been fished for at least 25 years. Dennis had it back to me in a week, and it is phenomenal, like new! Great job!

@2ndChanceTackle

3 жыл бұрын

Thanks for the feedback and the kind words - Dennis

My gosh. Mesmerizing video. I would not have taken my Penn 209 apart without stressing until I saw this video. I actually watched it twice before starting then two times more during. I got a stopping point because I had to order parts. My fiber washer is kaput and so were my drag washers. But I can’t wait to get to the point where I can see my reel function as smooth as this one. What an enjoyable video. What an excellent guy. Thanks Teacher. You got a PhD in reels. I so appreciate this. My Penn 209M came from a man who is long gone and was a dear friend and father figure. I’ve been wanting to do this rebuild. Thanks thanks thanks.

@2ndChanceTackle

4 жыл бұрын

Wow - thanks for the kind words and feedback! Best wishes on your rebuild. I will be posting the Penn 210 rebuild this week. That reel is a high speed version of the 209. Please stay tuned. Thank you again for commenting - Dennis

Thank you Dennis for this tutorial. You saved me. Pictures along the way disassembling didn't help but your video did.

@2ndChanceTackle

2 жыл бұрын

Glad it helped. Thanks for the note and for watching - Dennis

Wow, awesome video Dennis!!

@2ndChanceTackle

6 ай бұрын

Glad you enjoyed it. Thanks for the note and for watching - Dennis

This is more than helpful gives me a little confidence to dig out my dad's Penn reels dating back to late 60s early 70s

@2ndChanceTackle

4 жыл бұрын

Brett - best wishes and tons of encouragement - go for it! These are great reels the should not just be lying around. Dennis

Hey Dennis. Thanks man. Success! I got my new drags and new fiber washer. Now complete and she spins like new! Took some “monkeying” to get level wind guide shield and level wind in place! But success. This old reel came to me from a very important guy in my life who used it a lot in fresh water. But it definitely was dry and surface rusted. I did it for memory to him and now I’ll honor him and catch some fish! Now I have to find a great pole to match it to. Thanks so much. You made my day man! Your video was really helpful.

@2ndChanceTackle

4 жыл бұрын

Glad to help. That's my whole idea behind 2nd Chance Tackle. Take the older reels, restore them and some memories, and give them another chance to go fishing. Thanks for watching - Dennis

Sweet you do good work enjoy your videos on take apart and greasing and oiling off reels 😊

@2ndChanceTackle

4 ай бұрын

Thanks 👍. I appreciate the kind feedback - Dennis

Great reel. Shopping for another one of these to fish with so I can keep my other one in my vintage reel display.

@2ndChanceTackle

4 жыл бұрын

If you are interested in this one, let me know through my email - 2ndchancetackle@gmail.com or connect through my website www.2ndchancetackle.com - Dennis

Hay Dennis good news just got it figured out it was the barrel bushing at end of reel its under star now works great thank you for response

@2ndChanceTackle

3 ай бұрын

Great news! Best wishes for fun fishing with he reel - Dennis

I just found one of these reels in my collection and didn't even know I had it. The reel won't lock to prevent it from spooling out and I'm happy to see it won't be to had to take apart and hopefully fix. Thanks for the video.

@2ndChanceTackle

3 жыл бұрын

You are welcome. Best wishes on the repair and thanks for watching -Dennis

Thanks for the video. MY 209 kept locking up. Turns out it was a dirty worm gear in th elevel wind. The video was very informative and easy to follow. I have an old 309 Im going to service next. Thanks again.

@2ndChanceTackle

3 жыл бұрын

Glad it helped. The 309 is essentially the same service procedure. Happy to hear that your reels are getting a 2nd Chance! Best wishes - Dennis

I want to thank you for this video, my mother has had this reel her whole life and it seized up on me putting some new line on. with your video, I was able to fully tear it down and service it, just in time to go fishing on the norma k III next weekend! let's hear it for another 60 years of fishing with this reel!

@2ndChanceTackle

Жыл бұрын

YW. Love the Norma K. Hope the fishing is/was good -

Thanks so much. This enabled me to clean up and repair a Penn 290 that I pulled out of the bottom of a northern Ontario lake in the 90's. I had it around, and want to use it for shark fishing, and maybe freshwater trolling. Even though some of the chrome is off, it still works!

@2ndChanceTackle

11 ай бұрын

Glad it helped. Thanks for the note and for watching - Dennis

Thanks for the video. I’m just starting on refurbishing old Penns as a hobby. Many of the lots that I see on eBay or through other sites have 209s, so this video is helpful.

@2ndChanceTackle

4 жыл бұрын

Dennis - this is a great hobby and a lot of the model 209s were made, so you can find them a reasonable prices. The best thing is that parts continue to be available through Mysticparts.com, a regional authorized Penn reel parts distributor, so these will outlast most of the newer penn level wind reels - Thanks for our kind words - Dennis

Great videos. Keep em coming.

@2ndChanceTackle

3 жыл бұрын

Thanks, will do! I appreciate you watching. Please stay tuned - Dennis

Fantastic video, exactly what I was looking for, Thank you!

@2ndChanceTackle

2 жыл бұрын

Glad it was helpful! Thanks for the note and for watching - Dennis

@TravisInCanada1

2 жыл бұрын

@@2ndChanceTackle Hey Dennis, would you happen to know the size of the dog spring? I lost it last night and need to order a new one unfortunately find one in Canada is not an easy task. I was considering just trying to find a spring with the same dimensions.

Muito boa!!!very good Dennis this is classic and strong !!!

@2ndChanceTackle

4 жыл бұрын

Do you use this reel? It is a very good reel. I hated to see it replaced by others, like the Penn Defiance and Warfare, that were not up to the level set by the 209. - Dennis

Masterclass. Thank you.

@2ndChanceTackle

12 күн бұрын

Glad you enjoyed it! Thanks for the note and for watching - Dennis

@user-op9oo4ft9c

12 күн бұрын

@@2ndChanceTackle I'm not blowing smoke. It's an excellent tutorial video. Again Thanks

Thanks, Looking forward to the Shimano Torium rebuild, as I have recently taken one completely apart. Lots O' Little PARTS! lol

@2ndChanceTackle

4 жыл бұрын

Yeah. Do you still have the clicker that lodges under the star adjuster? That bug flies out more times than not as it is spring loaded. If you don't know how to put it back in, then the video will help. There is a reason that little part looks like a rocket ship! Best wishes - Dennis

I buy these at yard sales for 5$ and I have put so much fish in the boat with them. Best reels ever!

@2ndChanceTackle

2 жыл бұрын

Glad you like them! They were well made and will last and last with proper maintenance - Thanks Pete - Dennis

Dennis: thanks for making this video. I was recently given a 209 from a friend and want to clean and lube it before I put it back on the water as a surf shark rig. I'd never attempt this task without your guiding voice. Your hand speed and manipulation of the parts is scary fast and smooth. Reflects the incredible skills you have. I'll let you know how it turns out.... Thanks a bunch!

@2ndChanceTackle

2 жыл бұрын

Thanks - I will be waiting to hear! Dennis

Muito bom, muito bem explicado, me ajudou muito. Obrigado

I just bought a penn peer 209 at a car boot sale (trunk sale/swap meet) for £5 ($6.25) and I’m super happy with it, although I think it needs a bit of tlc. This video is great! I think I might have a go at cleaning it etc. myself!

@2ndChanceTackle

Жыл бұрын

Sounds great! Best wishes for great fishing with the reel - Thanks for the note and for watching - Dennis

Awesome videos man thanks. My brother found one of these on an old eagle claw rod. He also gave me a penn#180 in a little rougher shape than this one.

@2ndChanceTackle

3 жыл бұрын

Thank you for the kind feedback and for watching. Best wishes for great fishing with you new found reels - Dennis

Great video. I have the same reel.

@2ndChanceTackle

4 жыл бұрын

These were great reels. Totally over-engineered for the task at hand. It will out fish any of today's reels. Best wishes - stay well - Dennis

Thanks for all you do in these videos, you are my goto guy fir anything Penn reel related. Gotta question, what reel handles interchange with the older Penn 209s, 309s, etc. Looking for more modern power handles to customize some older reels. I love the old reels, but the handles are functionaly inferior and uncomfortable. Thanks for the help, and thanks for all the Intel and experience!

@2ndChanceTackle

2 жыл бұрын

Thanks for the note. The handles for most earlier reels are interchangeable. Those for the JigMaster, Long Beach, Beachmaster, SeaBoy and DelMar as well as the 3/0 Senator are interchangeable. If you want more leverage on the 3209 go with the JugMaster or Long Beach handles - Dennis

Thanks for the video, just did a tear down and deep clean myself thanks to you. I reassembled the reel without grease and it works but I need to grease it when my replacement drag washers show up. What kind of blue grease do you use? Thanks again!

@2ndChanceTackle

3 жыл бұрын

The blue grease is Penn Precision reel grease. You can find it online through an internet search. The small container is also sold in a combo pack with the Penn fishing reel oil. Thanks for the feedback - Dennis

Thanks for the video, recently geared up for Lake Superior with all lightly used 209's! Been referring to it a bunch. Do you have a video that shows the clicker replacement process?

@2ndChanceTackle

4 жыл бұрын

Jeff - most of the clickers cannot be replaced as they are peened on to the side plate and the replacement solution would be to replace the entire side plate. For the 209, you can also drill out the old on and replace with a new click stud held in with an "E" clip. Some of the new 209s actually have that as part of the assembly. I believe hose are available through Mysticparts.com. I do not have a video to show how it is done. but I will add your request to my list. Thanks for asking and thanks for watching - Dennis

Hi Dennis, love your videos with all of the helpful information on fishing gear. One question I have on these Penn type reels is how come I have never seen a video where you take off the eccentric with its spring? I like to clean every part of the reels I work on - a new hobby - but I have not found an easy way to get those pieces back in place. Any suggestions?

@2ndChanceTackle

2 жыл бұрын

I only remove them if they are stuck or dragging. Just like the springs on spinning reel bails. If you would like to see how to replace these, you can watch my video here. kzread.info/dash/bejne/dqCW0cqcoZCtg5s.html thanks for the note and for watching - Dennis

Just bought one an it was missing a few parts I See The Handle is every hard to turn so I just did a basic Clean And Now Im gonna Do Metal Cleaner on it and hope I get it fishing bought for 20ish bucks so no lose really just hope it goes smooth as your does Thanks For The Info

@2ndChanceTackle

2 жыл бұрын

YW - Thanks for the note and for watching - Best wishes for your tune up - Dennis

@coryhall668

2 жыл бұрын

@@2ndChanceTackle thank you sir and What's the name Of the cleaner you use to get the corrosion off the metal

Thank you, I found 2 Penn 209 in the garage attic. After a few attempts , was able to service both. I have a Sharespear auto 1821.have you a video on servicing? please

@2ndChanceTackle

4 жыл бұрын

Thanks Charles - Unfortunately, I do not major in fly reels and I do not have a video. We don't do much fly fishing here and I rarely see one of these around. I guess if they break, the cost of repair and lack of parts probably leads folks to just get another one on EBAY. Thanks for watching and for taking the time to drop a note - Dennis

HI -Just getting started with reels and your videos are great! I have a 109 that is in great shape but i have a question...neither reel crank knobs do not turn. They appear to be plastic. should they turn on the shaft. IF so what;s the best way to break them free without damaging them? Hopw you get this and thanks for your help.

@2ndChanceTackle

4 ай бұрын

They should turn on the posts. The problem is that the plastic has swollen and is pinching down on the post. That cannot be repaired. You may try heat, like a heat gun or hair dryer, To expand the plastic, but you will run the risk of burning the knob and possibly causing a fracture of the plastic parts. Some folks have tried to soak the handle in a penetrating oil or rust buster. That approach has minimal success - Your best bet is to get a replacement handle. Thanks for asking - Dennis

Hi Dennis! Shout out to you from the west coast! Your videos are a bounty of knowledge. I recently picked up a Peer 209 and a Jigmaster 500S from a Garage Sale and while the 500s seems to perform sufficiently well, the 209 seems to have trouble spinning as the spool both looks and sounds like it rubs against the ring on one spot as it spins. Could it be the ring or the spool? Also, it is stuck in Knuckle-Breaker mode, though I'm sure I can easily fix that by following your process. Either way, thank you again for your videos! Absolutely priceless to the fishing and preservation/historical communities! - Duriel

@2ndChanceTackle

Жыл бұрын

Something is wrong inside. The A/R dog, which prevents the knuckleduster, may be trapped in the main gear and causing the spool issue. It is not the ring. That reel needs to be taken apart. The video you have watched will show how it is done. Thanks Dennis

@1theredrooster

Жыл бұрын

@@2ndChanceTackle Thanks for the response! I took it apart, and both the dog and spring have vanished and are nowhere to be seen. I need to order a replacement from Mystic. Also, the friction does feel improved compared to prior. It'll need some more TLC, but at least I have a path forward. Thank you again! - Duriel

Have a question.I picked up a 209 but on the level wind loop, it will go over to the non handle side and stop and will not return. You put it in free wheel and it will go back and forth like it should. The only way it will return with the spool locked out of free wheel is to put side pressure on it back towards the handle side and then it will return and go to the non handle side again and stop again. I have not had the reel apart yet and just wanted to see what I should be looking for. Thanks. By the way, great video.

@2ndChanceTackle

2 жыл бұрын

This sounds like a damaged line guide pawl that will need to be replaced. n point on the pawl is probably worn. Check the side plate of your reel to find the spare pawl screw and remove it to find out if you have an extra or if you will need to buy one. If you have one, unscrew the cap on the line guide and swap out the parts and then let me know if that solves the problem - Dennis

I have my granddad’s Penn 209 that I know is probably as old as I am, or nearly. I really enjoyed watching your video on how to take it apart and service the reel. Is there a way to know when it was manufactured and date the reel? Thanks for your advice.

@2ndChanceTackle

3 жыл бұрын

That is pretty hard to do as the reel was introduced in the early 1950s and is still sold today. Some clues - if it has a plastic spool it is before 1960. The football or plastic handle means it is an early model. Rubber handles are later. If it says made in the USA, it is before 2006. The reel did go through several changes know as the Peer and Peerless. The side plate colors also vary. Sorry I can't help pinpoint it further - Dennis

Do you have a video on adjusting the worm tension with the spool tension?

@2ndChanceTackle

2 жыл бұрын

I don't that worm is held with tension throughout he side plate cap. It should be snug, but not overly tight. Thanks - Dennis

Do you do cleaning and lubing of Penn reels. I have a Penn Fathom II 15LW that I bought used on ebay. The reel seems like it might be gummed up and needs a good cleaning and lubrication and maybe a once over of what condition it is in.

@2ndChanceTackle

3 жыл бұрын

Yes I do. Please send a note to my email 2ndchancetackle@gmail.com for service and repair information - Thanks for asking - Dennis

Dennis which is the older reel 209 the one with circle an 209 in it ??? Or the one with the lettering on bottom in big print just really like too know difference between the two?could you answer please thanks again Keith

@2ndChanceTackle

2 ай бұрын

The ones with the circle are older

Good vid..thx. Might position the camera so your hand doesn’t block what u are doing so much ...

@2ndChanceTackle

3 жыл бұрын

I just got a new camera where I can use the screen in front so that I can pay more attention to the hand and reel places. Thanks and thanks for viewing - Dennis

Hey there I’m having problems with a 209 reel I have. The spool seems to be really sloppy. If I hold it tight to the none handle side it feels amazing if it moves over tho the handle/drag side it won’t reel at all. It almost as though it’s missing a washer. I see almost like a hexagon piece on your spool on the drag side when it’s disassembled mine does not have this part. Is that what I need?

@2ndChanceTackle

4 жыл бұрын

Thanks for connecting Jake. Please keep the conversation going through e-mail

What size wrench do you use to remove the very first screw holding the handle on? I can not get mine off for anything.

@2ndChanceTackle

4 жыл бұрын

I use a small screwdriver for the hold down screw that is less than 1/4 inch size if that is what you are asking. The main handle screw with the ridges uses the standard Penn handle wrench, but in a crisis, you could use a channel lock pliers.

Geezzz! this take apart tutorial is so frightening 😱. I mean he took every single diminutive piece out of it😱

@2ndChanceTackle

3 жыл бұрын

And better yet, I put them all back together! Thanks for the note. If you have a plan, patience and a sense of humor, it it not that frightening - Dennis

@maddog9793

3 жыл бұрын

@@2ndChanceTackle funny thing about it is that I was about to disassemble my 209, but thank God I watched your tutorial before I even put my hands on it 😂. Your the man for that job, my respect! 🤠

How does this lever spring sit in these things? My lever seems to have a ton of slop and kind of flops around.

@2ndChanceTackle

Жыл бұрын

Watch this video kzread.info/dash/bejne/dqCW0cqcoZCtg5s.html. Thanks for asking - Dennis

Just bought parts from ebay will try them let you know putting in the gears an all inturnal parts

@2ndChanceTackle

3 ай бұрын

Great. Best wishes - Dennis

@keithletson7360

3 ай бұрын

Dennis I am missing the long spacer at the end of your. Viedo where you put the last shim or wave washer there is a barrel washer is that my problem?? Hopefully I’m not being a pain just almost lost here except for this issue???

This reel has multiple oil ports with spring loaded ball bearings, what do you use to oil the reel using these ports? I've tried with the Penn 2oz bottle size (it looks like a bottle of eye drops) but it just makes a mess.

@2ndChanceTackle

3 жыл бұрын

Best to just depress the ball with a tooth pick and use any oiler.

Dennis quick question how do I get the free spool level re attached. Thank you

@2ndChanceTackle

4 жыл бұрын

I am assuming you still have the eccentric and spring in place on the gear side of the reel and that you are finding that the mounting stud on the outside has slipped to the point where you cannot hook the lever over the edge of the side plate and the bottom of the arm over the stud. If that is the case, reverse the lever arm and place over the stud. Pull the lever as if releasing, or setting the free spool until you are about half way through the rotation. You will find a balance point where it will not snap back or forward. When you are there, take the lever arm off and flip it so that the tab is over the edge and facing properly. You can then set the screw in the stud and you should be good. If you are asking about reinstalling the eccentric and spring, let me know. That is more detailed - Dennis

Can you cast this reel? Im about to buy 2 of them used in good condition. Im a catfisherman and I fish from the bank. I normally dont use anymore than about 1oz of weight.

@2ndChanceTackle

11 ай бұрын

You can cast these, but the 1 ounce weight may need to be increased and make sure to use a lighter line

Hello, currently refurbishing an old Penn Peer 209. If I don't have an ultrasonic cleaner, what can I use instead? Thanks!

@2ndChanceTackle

4 жыл бұрын

You don't need the ultrasonic cleaner. Use a general degreaser like WD-40 or other non-abrasive cleaners to soften or dissolve the old greases and dirt. Then use a series of paper towels, took brush, cotton swabs, etc to remove the old greases. You can use a metal polish on the chrome pieces and very fine steel wool #0000 to help clean the metal parts. - Dennis

Dose the color of the handle have something to do with the year of manufacture

@2ndChanceTackle

3 жыл бұрын

Not that I am aware. I have heard that in the past, but I have never been able to map the color to the year - Dennis

Hello Dennis. What would you recommend for faded side plates?

@2ndChanceTackle

4 жыл бұрын

There is no solution to UV fade short of replacing the parts. There are some automotive waxes and finishes that can restore them for a while, but the fade will return over time. Thanks for asking - Dennis

@MrRamyourcar

4 жыл бұрын

@@2ndChanceTackle thank you

I recently lost 50% use of my dominant hand.. How do I sne my two 209s to you for reconditioning?

@2ndChanceTackle

Жыл бұрын

Please send a note to my email - 2ndchancetackle@gmail.com for service and repair information - Thanks for asking - Dennis

About a little coil spring, if coil spring missing, can we replace with other coil spring? can using from zippo coil spring? need advice sir.

@2ndChanceTackle

4 жыл бұрын

I recommend using the one for the reel. They are still available through Mysticparts.com. If you want to try fashioning one, you can try a ball point pen, lighter or others, but the spring is generally smaller that those alternatives. The part with shipping is probably $7. - Dennis

@didimaya8675

4 жыл бұрын

@@2ndChanceTackle Thank you for the advise. 👍

I just purchased a Penn 209 Level Wind at a garage sale. It seem to work fine when I picked it up but now when turning the handle, the line guide gets all the way to the right it stops. If I jiggle the handle back and forth it will continue to reel as it should until it returns to the far right just before it stats to go back to the left. Occasionally it may stop somewhere in the middle. What’s it doing? Or what’s it not doing and how to fix?

@2ndChanceTackle

4 жыл бұрын

You likely need to replace the line guide pawl. It is probably worn or has a broken tip. If it is not the pawl, then you need to make sure the worm gear is turning. If it is, then check the tracks(grooves) in the gear to make sure they are uniform and not damaged or course. If there is damage, you would also need to replace the worm drive. - Dennis

@lenhawley7301

4 жыл бұрын

2nd Chance Tackle 😊👍

I have a slight issue with my reels that I service. After I service them, there is a click before it starts to retrieve. Did I place something incorrectly? This goes for my Penn 209, Jigmaster and Long Beach 60.

@2ndChanceTackle

3 жыл бұрын

That is usually the spool shaft shoulder taking a moment to align with the slot in the pinion gear. It is nothing of concern. You may check to make sure the spool shoulder cup is free of dried grease when you go to reinstall. Same with the slot in the pinion gear - Thanks for asking - Dennis

@Firebird593

3 жыл бұрын

@@2ndChanceTackle Thanks for the quick reply. I got into servicing Penn reels recently. Your videos have been a great help.

What do you use to clean the old grease out of a reel?

@2ndChanceTackle

3 жыл бұрын

I normally use a penetrating oil like WD40 as a general degreaser. It will not harm the parts like some lye or acid based degreasers - Thanks for asking - Dennis

Hi Sir, can this reel mod to a surfcasting reel? Can I leave out some parts? Need your advice. Thanks!

@2ndChanceTackle

3 жыл бұрын

Yes - you can remove the idler gear, worm gear and line guide to modify this to a casting reel. You should leave the line guide shield on for frame support - Dennis

@mizhar4365

3 жыл бұрын

@@2ndChanceTackle Thanks for the advice!

Got a question for you sir: do you know why a normally functioning 209 would disengage the anti reverse when the clicker button was switched on, and no clicker sound comes? Thanks

@2ndChanceTackle

Жыл бұрын

No idea. This is the first time I am hearing it. The A/R is on the gear side and the clicker button is one the other side, so they do not touch or interrelate at all. Dennis

@ragnarragnarsson3128

Жыл бұрын

@2ndChanceTackle I am now thinking it is either a "feature" of older penn reels or a common modification of some kind. I recently bought the 209 and a 350m from different sellers and they both do that. The clicker works actually but you can't reel in with the crank while it is engaged. But the spool turns freely.

@2ndChanceTackle

Жыл бұрын

Your drag washers will likely be too loose or need to be replaced. Tighten done on the star adjuster and see if that changes it - Dennis

@ragnarragnarsson3128

Жыл бұрын

Thanks Dennis will do! I did have the star loosened all the way out.

Dennis have a 209 no response on handle just put one together what a mess it releases the drag as winding handle with no gear response on gear drive or center drive????? Can you help???

@2ndChanceTackle

3 ай бұрын

Hmm. Sounds like the pinion gear may be installed backwards. are sure that the slot in the gear is facing you when it is installed. That slot meshes with the spool and turns the reel - Dennis

@keithletson7360

3 ай бұрын

@@2ndChanceTackle yes Dennis i just got the new parts from eBay an tried I have slot facing me an still even with new parts it’s better but the star spins free when you set the drag ?? Could’ve someone have put a star on from a left hand reel?? An when you do put drag on it gets hard too turn until that star losen up as turning hard too spin handle but as it losen s up as star does

What size wrench works on the handle

@2ndChanceTackle

Жыл бұрын

This is a speciality Penn wrench. It is not a box wrench. If you need to remove the screw and do not have the wrench, use a small pump pliers and be careful not to scrape the chrome on the handle. You can buy these wrenches for a dollar or two on eBay - Dennis

Can I send you my reel for cleaning and parts replacement? The nylon level wind gear sheared on me and my reel is DIRTY.

@2ndChanceTackle

2 жыл бұрын

Yes - Please send a note to my email 2ndchancetackle@gmail.com for service and repair information. Thanks for asking - Dennis

I tried doing this and I accidentally took off the eccentric now im having trouble putting the eecentric spring back in the right place and keeps popping off

@2ndChanceTackle

3 жыл бұрын

Watch this video and it will show you how to re-set the eccentric spring. Please note that yours may be mirror image. Some springs load to the right and some load to the left. kzread.info/dash/bejne/nY2sxrmKitvTY7g.html Dennis

I have a 209lc when there is any tension on the line it won’t reel in the line. The handle just turns.

@2ndChanceTackle

3 жыл бұрын

That sounds like a problem with the drag washers. They are either worn, missing, or not installed correctly assuming the rest of the drag stack pieces are there

@danodano60

3 жыл бұрын

@@2ndChanceTackle the reel is new. I bought it as a open box but new. I told the seller about it. He sent me a full refund. Told me to keep the reel. Nothing can be worn out.

@2ndChanceTackle

3 жыл бұрын

If you would like me to look at and see if I can repair it, please send a note to me at 2ndchancetackle@gmail.com - Dennis

Where can i get a new plastic idler gear for this model

@2ndChanceTackle

3 ай бұрын

You can order the gear through Mysticparts.com by following this link www.mysticparts.com/PennParts/Parts/64-209.aspx Thanks for asking - Dennis

@dretobeatassistant3288

3 ай бұрын

​@@2ndChanceTackle just ordered,love the vids

@2ndChanceTackle

3 ай бұрын

Glad to have helped. Thanks for watching - Dennis

Do you seel any reels online?

@2ndChanceTackle

4 жыл бұрын

Hi Robert. I do sell some of the reels I show in the videos. Please send me a note to my email - 2ndchancetackle@gmail.com and let me know what you are interested in buying - Thank you Dennis

I have some I will like for you to fix how much do you charge a a hour

@2ndChanceTackle

4 жыл бұрын

Please send a note to my email 2ndchancetackle@gmail.com and let me know what reels you have. I will provide you with the rates and servicing information. Thanks for asking - Dennis

@colorspacmangalvez5990

4 жыл бұрын

Ok thank you

@colorspacmangalvez5990

4 жыл бұрын

Good afternoon, I have 2 reals that need repair One is a daiwa GS-30 3 ball bearings and this one needs a handle and anti reverse don't work and a tune up. Then I have a Shakespeare model E F and it needs a tune up and side clicker don't work. The email didn't work for me sorry

The yok is staying down for you after you put it in the springs an add the other piece my won't stay like yours it hards to see it too any ideals

@2ndChanceTackle

2 жыл бұрын

You may need to push down on the pinion gear and hold it while you reset the bridge

Tengo uno completamente nuevo sin usar. Lo estoy vendiendo

@2ndChanceTackle

2 жыл бұрын

¿Por qué? ¿Hay algo que no te gusta del carrete?

Good video, but your arm and hand hide a lot of the stuff. Move the camera above or behind.

@2ndChanceTackle

2 жыл бұрын

I've just started trying a different angle on my newer videos. Hopefully you will see more reel and less hands - Thanks for the note Rick - Dennis

@gregvoutsikakis9493

Жыл бұрын

@@2ndChanceTackle Hello Dennis, and thank you for the wonderful and informative videos. I have 4 209's that I use for Cat fishing from the bank, although I can cast the thee I have in service up to 75-80 yards . I wonder if I can get a bit more distance by removing the level wind gear from the fourth reel ,(spare) and using it as a conventional type of a reel, or if the level wind can be removed at all. Thank you and Happy New Year.

The 9m is smaller than this one right? What species is this reel capable of handling?

@2ndChanceTackle

2 жыл бұрын

Yes - the 9M is the smallest, the 209 is the middle and the largest is the 309. The 9M is a strong reel and can easily handle fish in the 5-10 pound range - Dennis

@bobclouser450

2 жыл бұрын

@@2ndChanceTackle I have a 209,,that when you reel,it binds slighty 3/4 of the way across the level winds travel..what should I check first?

@2ndChanceTackle

2 жыл бұрын

Check the worm gear track or the line guide pawl first. If they are OK, you may be missing a tooth on the idler gear or have something caught in a tooth of the worm gear drive - Dennis