Hey all, I heard from Pepin and they're planning on releasing an add on magnet sets that will allow you to evenly add 2.5 or 5lbs to the dumbbells for those of you who don't want to have one extra plate per side like I showed on how to do 5lbs jumps.

@TheCarterHomeGym

Жыл бұрын

That's cool. I was thinking about the Plate Mate magnets and how they'd probably work.

@DavidLee-cw6ci

Жыл бұрын

So it'll be slide two rails, making sure you hit right marks, then squeeze in two magnetic plates. I can imagine that might end up being an off-putting hassle, like changing weights on iron masters. We're getting closer to the holy grail, this probably isn't it though I think.

@timk8258

Жыл бұрын

@@DavidLee-cw6ci still would be way faster than adjusting Ironmasters

@stevefridman

Жыл бұрын

@@DavidLee-cw6ci significantly more convenient than iron-masters, and it’s not even close. The sliders are smooth and literally take one second.

@jordanstangl2293

Жыл бұрын

Can’t wait for the v3 lol

This review is pointless without testing the durability of these dumbbells by throwing from the 23rd floor of the Nakatomi Plaza.

@markhalstead2386

Жыл бұрын

LOL! That would be fun to watch. I bet Coop at garage gym reviews would do it.

@MIDTOWNE1

Жыл бұрын

@@markhalstead2386 Definitely

@BasementBrandon

Жыл бұрын

You had me in the first half.

@RogueCylon

Жыл бұрын

Go easy now Hans.

@balkee42

Жыл бұрын

Yippee kay ay @&$&!!!

Great review! I wish these were available when I bought my original Pepin set about 18 months ago. I don’t like changing them out as much anymore but spending $1700 to replace is hard to justify. The knurling on them is the best of any adjustable dumbbells I have tried. Pepin makes quality products for sure!

@TheJwalk1234

Жыл бұрын

Yeah I’ll just get get 500 pounds worth of barbell for like a fourth the cost

@BasementBrandon

Жыл бұрын

I've enjoyed my HDs as well, but agree they do get tiresome to change. I've upgraded equipment in the past by selling what I have to help offset the cost of something new.

I have added these dumbbells to a phantom cart so many times. I really want to pull the trigger because as you stated, small space + value. I like a lot of what Pepin has been making and the Fast series is solid and fast. Thanks for the video

@BasementBrandon

Жыл бұрын

Interestingly enough the Havak guys have been very supportive of my Pepin posts!

@jaycherno1141

Жыл бұрын

I can't pull the trigger either, since its $2,400 shipped to my door. The Ironmasters and Powerblocks are less than half that

@dasdos002

Жыл бұрын

@@jaycherno1141 whoaaa shipping is $600?!? I just bought a 300 lbs treadmill and shipping was $160. These dumbells are much easier to maneuver than a treadmill! $600 for shipping is absurd.

@jaycherno1141

Жыл бұрын

@@dasdos002 I agree. It was $750 shipping for me! I ended up going with Ironmaster (free shipping).

@dasdos002

Жыл бұрын

@@jaycherno1141 good call! That’s a lot of money just to move two small boxes! What are they smoking?!?

I really like the fact that you are reviewing Canadian products! Finally some stuff for us Canucks that we dont get rob with custom fees and shipping...up to you now! Great review

@BasementBrandon

Жыл бұрын

There are some great Canadian companies in my gym like Pepin, Irwin, and Oak Club!

Watching this stuff evolve has been a fun ride

@BasementBrandon

Жыл бұрын

In soviet russia, dumbbells lift you.

Thanks for the video. I've wanted a pair of these since I first saw the design, and this video only further sold me on them. Pepin seems like a very straightforward, honest company.

@JBS7551

Жыл бұрын

I have these and they are 100% worth it

@BasementBrandon

Жыл бұрын

He's been really communicative throughout the process.

@kenbrandt6100

Жыл бұрын

@Basement Brandon That matters to me a lot. Obviously I want items that match my needs the most perfectly, but I also want to support businesses that listen to feedback and adapt accordingly.

Having owned the standard old school spin lock dumbells for about 1.5 years, I can definitely say that I don't do dumbell exercises sometimes because it takes longer time to set up. The good thing about it is that I can drop those and not been my wallet screaming. I tired power blocks and didn't like them. Nubell and these I would look into as a potential upgrade. I really like those interlocking plate design. It definitely makes the plates more secure and gains my trust to do exercises over my head.

@BasementBrandon

Жыл бұрын

Yeah still a tough pill to swallow for price, but if you use DBs they can really come in handy

@user-yv4kn2ws8r

9 ай бұрын

You can't drop nuobell at all plastic handles

Thanks for the review I have been looking for durable adjustable dumbells I was a bit thrown off by the price but when you explained in context makes total sense.

@BasementBrandon

Жыл бұрын

Thanks for taking a look!

The review i was eagerly waiting for!

@BasementBrandon

Жыл бұрын

Hope it helped fill in some gaps

Wowzers, nearly 24 minutes of a fantastic review! I've got a dumbell set from 5-100lbs as well and I can't see myself getting adjustable, but if I did these Pepin's look like they'd make it to the top of my list to consider. The challenge with the Pepins is you can't do an overhead triceps extension or lat pullovers based on the handle guides. Nuobells can do that based on their design. Pros/Cons to everything I guess. Great review Brandon, I loved it!

@BasementBrandon

Жыл бұрын

I meant to show it in the video as I took footage, but you can do those exercises, just a bit more wonky. Thanks for the kind words.

@JBS7551

Жыл бұрын

I do pullovers with the fast series no problem

Wow, they look really good! I would say that the lower weights are too expensive but these 120's are priced competitively with powerblocks - I am impressed!

@BasementBrandon

Жыл бұрын

Thanks for taking a look!

First day impressions:It arrived in a waist high box. kzread.infoUgkxP26Tir6n60vUkdtn4mbwhRO8cwuJQNy2 Each dumbbell was in its own foam box within the shipping box. Everything was secure and in good shape. No weird smells. The weight changing mechanism is really smooth and straight forward. Changing weight is really fast and easy. Though the handle is plastic, I don't think it will be breaking anytime soon. So far pretty impressed after my first session with them. I was afraid they were going to be too wide at first, but I didn't have any issues with them while doing upright rows.

@BasementBrandon

9 ай бұрын

True

I'm buying these for sure. I have the bowflex 1090s and the most infuriating thing is that they're the same width whether you're using them as 20s or 90s and they generally suck otherwise. So I got a nuobell 50 for the lighter weights, but that gets stuck in its cradle. The thing I'm loving about these- apart from the fact they go up to 120- is that the weight selection mechanism isn't integrated with the cradle. It's all in the dumbbell. Great design. Much respect as an engineer.

@BasementBrandon

Жыл бұрын

I think it may take some slight adjusting on the cradle with these. You have about 1/2" of adjustability per side. Once you find the perfect spacing it makes racking much easier when fully loaded.

@steverapos3904

Жыл бұрын

Powerblocks don't need the cradle - sounds like another option that might work for you

@aynrandfan7454

Жыл бұрын

I got the Pepin fast dumbbells too after owning the 1090s one of the plates chipped and doesn't adjust anymore ...one time I was pressing and some of the plates slid off as well which freaked me out. The Bowflex quality is terrible long term and a safety hazard.

These look great. Probably the only pair of adjustable dumbbells that would make me want to upgrade from my powerblocks, especially with an add on magnet. I love the powerblocks since switching weights is super simple, but I never take out the add on weights in between. I also don't like how they don't look / feel like real dumbbells.

@BasementBrandon

Жыл бұрын

Yeah the feel is the thing that killed it for me! I know a lot love them though.

Thanks for this review Brandon! 👊🏻

@BasementBrandon

Жыл бұрын

You bet!

I sprained the F outta my wrist when i was younger trying not to drop the 120s after a chest press; trying to slowly lower them to the floor as best i could. I felt my wrist translate across my forearm when my wrist had the max leverage on it. It swelled up immediately, lost ROM and hurt for 3 months. Now I always make sure i save enough to bring them to my knees and swing myself back up. These dumbbells look really cool. I've had power blocks for over 10 years and like them.

@BasementBrandon

Жыл бұрын

That doesn't sound fun :(

@DrTopLiftDPT

Жыл бұрын

@@BasementBrandon I took the “don’t drop the weights” gym sign too far haha

@BasementBrandon

Жыл бұрын

@@DrTopLiftDPT 😂

Great point on the drop test, it doesn’t make sense to drop them any other way. The only thing I’ve ever spent that much money on is my functional trainer and even 2 years later I still guide the weights down carefully

@BasementBrandon

Жыл бұрын

In time mike… in time 🤡

@stevesorensen9648

Жыл бұрын

I'm pretty old school when it comes to lifting. I've been doing it since 1978. I was taught never to drop the weights. The weights back then were very high quality (like everything else) but dropping them was simply out of the question. Cross fit style training with all of the Olympic lifting has really opened the door to dropping weights. No matter how well something is made its not going to last as long if you feel the need to keep dropping the equipment. Even with bumper plates I still wouldn't be inclined to drop my weights. It's just too ingrained in me not to do so.

@jsedge2473

Жыл бұрын

@@stevesorensen9648 I agree. Unless you feel as though you're about to injure yourself, I see no reason to throw weights.

@trulsrohk1

Жыл бұрын

dropping dumbbells can be completely involuntary or a good thing to do to avoid an impending injury. Think flat/incline DB press/flys. There are times when dropping them from height would absolutely be the right thing to do and trying to guide them down would be stupid as you'd risk worse injury. By all means if you never push anywhere close to failure and only use light weight, then dropping is probably not going to be a consideration

@richardmather1906

Жыл бұрын

@@trulsrohk1 I have dropped a db while failing on a db bench press. Arm started to "wander" and that was it. My set up was not very good. Obviously, it is not up head high, but it is higher than Brandon is doing here.

Pepins are fantastic. I have the HD'S, and they feel better than any other adjustable or fixed dumbbells that I have used. Given I've never used Watson's. The only draw back to the HD'S is the time it takes to adjust, but if you get the stand with it, it makes it a lot easier, and faster. The handles at 37mm, and 49mm with excellent knurling are great for grip, forearms, pressing, triceps, and biceps. I had high expectations before I received them, and braced myself for disappointment, but they exceeded my expectations.

@davidoss15

Жыл бұрын

Thanks so much for your feedback on my HD series !

@BasementBrandon

Жыл бұрын

Agreed, David does handles right!

@FreshMattizl

Жыл бұрын

@@davidoss15 hey david! Any way to get these bad boys distributed in Europe? I need this set in my life right now!

Thanks for the review, always good info.

@BasementBrandon

Жыл бұрын

Any time!

I love the fact there are no gears, dials, threads. Etc to fail. Super simple, super strong design.

@BasementBrandon

2 ай бұрын

agreed

@joeschmidhofer2674

Ай бұрын

I love the fact that Rep is releasing them for half the price!

@xpusostomos

Ай бұрын

@@joeschmidhofer2674 Thanks for the heads up.... looks like 32% off actually.. but a 6 month wait for pre orders. ;-(

Have these and they are fantastic. Have to give them the edge over my ironmasters

@BasementBrandon

Жыл бұрын

Appreciate the first hand feedback

These look great, and I certainly agree on the value proposition of them. That railing on the sides is not ideal, but they are heavy, quick changing and steel. That has been a unicorn in the adjustable dumbbell arena. Great review man!

@plmn93

Жыл бұрын

Yeah the rails are not ideal, but it's better than Nuobell's plastic cam followers that are practically guaranteed to break sooner or later and are not serviceable.

@babygiantbarbell1014

Жыл бұрын

@@plmn93 totally agree

@JBS7551

Жыл бұрын

I have them and the rails actually don't bother me at all, I was worried too

@BasementBrandon

Жыл бұрын

Thanks Philip!

@skanda1832

Жыл бұрын

@@JBS7551 Thank you for sharing your direct experience!

I have been waiting for this, I bought the Nuobells just because I was tiered of waiting. It looks like the V2 of these will be worth waiting for mainly for refinements to the handle/ adjustment bar and hopefully balanced 5 pound adjustments.

@BasementBrandon

Жыл бұрын

Yeah it’s cool to see him actively improving things as part of the process.

@bugsysiegals

Жыл бұрын

When is v2 supposed to release?

@echtalion

Жыл бұрын

And release in the UK?

@alexbenzler5327

Жыл бұрын

how do you like the nuobells?

@HighSpinSwingSpeed

Жыл бұрын

@@alexbenzler5327 they work perfect. Can change quick to do supersets, never had a failure, feel like real DBs. I had the Bowflex before and the Nuos are significantly better. I bought some 85 and 95 fixed DBs as well

It is great to see the progress and development of Home Gym equipment. Just jealous that these didn’t exist sooner. too much effort to sell my IMs and Powerblocks.

@BasementBrandon

Жыл бұрын

Yeah things keep improving, which sucks bc it means I keep buying 😝

I will buy these thank you for this!

@BasementBrandon

Жыл бұрын

Hope you enjoy!

I just bought one of their Pro Series set. I was shocked how good customer support was and how good the dumbbells feel.

@BasementBrandon

Жыл бұрын

He really cares about his customers, which I can't say for all the companies I've dealt with.

@davidoss15

Жыл бұрын

Thanks so mich Eric ! 🙏

Awesome review there, Good job! 👌🏻💪🏻

@BasementBrandon

Жыл бұрын

Thanks! 👍

Those are really nice! I have the first generation Pepin handles and I really like the feel of them in my hands.

@BasementBrandon

Жыл бұрын

Agreed, he does a good handle!

Great, detailed review. I appreciate it. The only part I didn't agree with is comparing the price to a set of commercial urethane dumbells, which hardly anyone in the market for adjustable dumbells would cross shop with. A better price comparison is with a set of hex dumbells. Also, most home gym owners won't need or buy every 5 lb increment up to their max dumbell weight. But like I said, good review overall!

@BasementBrandon

Жыл бұрын

I probably should have used hex as an example for most as you're still looking at substantially more money (and even more space). I just used urethane since I was using myself as the use case. Appreciate the feedback!

I can’t wait for your second initial impressions. Just giving you a hard time. You know i love your videos!

@BasementBrandon

Жыл бұрын

Got the first one out in 2 weeks, 2nd one will take 2 years :)

@johne7212

Жыл бұрын

@@BasementBrandon You are the man. Keep up the great content!

Nice review as always. I have the first version of their screw-in (HD is the name now?). It was one of their early orders before things went banana and I still love them today. The knurling is amazing and I got their fat version afterwards. Yes it takes a bit of time to setup and you can't drop them from car chase, but it's still one of my precious gym possessions. I can't recommend them enough. Buying these new shiny ones would be a stretch with wifey though... However, I'm very happy to see that David updated the design numerous times and now just released the most advanced adjustable model. Very happy to see too that we're from the same Canadian province and that we can encourage our people here with crazy nice local made stuff ;) Go Poutine GO!

@BasementBrandon

Жыл бұрын

I'll do a video of the HDs, I think there were a few enhancements but would love to hear your point of view.

@Aquefaque

Жыл бұрын

@@BasementBrandon The first version is "hand made", not CNC. They looks good in a picture, but in real life those are very beautiful... When the delivery man came and put the box in my hand, he said : That is heavy... ;) I purchase used the fat handles afterwards, and those ARE FAT. I've tried fatgrip on the normal one, but since the handle is bigger, they could not fit well. The guy that sold my the fat handles was a welder and he told me that David, that handmade all the handles before, made one of the best welds he ever seen and it will never fail "that guy makes arts"... (I'm no welder, just reporting what he told me). At first, I didn't had any uhmw donut inside, I had to purchase it afterwards so the tightness were not "there" at first. They are also a bit slower when you screw it than the new model (same version but enhanced and better made). It was still evolving a lot at the time. Also, I have to check before and after each sets that the screw are tight. It annoys my wife, but I got used to it, I don't even thinks about it now. The knurling on the normal handle is not TPB, but close. For a DB it's definitely very high end... I don't know what Coop got, but mine is quite sharp... The fat version has a milder knurling, but not bad at all, but maybe closer to what Coop described.. Not the typical DB thing however and nothing to complain about really... What I've found, is that you need to ensure that you have at least 1 inch of screw inside the handle to have a safe set, I've stretched my luck one time, but hopefully nothing bad happened and the weight came of. You just need to be aware. Other than this, the DB is great and I'm still figuring out how I could load them faster, like the IM... I might build a rig at some point. The stand that Pepin's sell dream great, but man that's big for a homegym... And when you load a 80-100 DB, you don't want to bring them on a high table... However, when you get used to it (2y), you can definitely be quick at building your DB. If you prepare your things in your resttime you can make it smooth and quick. On the ground is the best IMO, and it's really fast with experience though it was not the case when I got it... Magnetic weight attachments are a great assets, I might invest in microgains or other gadgets like this to load even faster. About the plating, even after two years of everyday use, I got a couple of scratches, but nothing that really attacked the plating itself. The nickel is still looking crazy great... Really, I bought them before it went banana and I'm glad I did and this is something I will probably keep forever. My wife told me she would like another sets for her... Eh boy... It sure that if I had the money I would get the fast one right away, but I'm extremely satisfied with what I have and getting those would be a luxury. And my wife needs to learn to enjoy what we have!!!

Great review Brandon. I may have to replace my fixed dumbbells for a pair of these and make room for more equipment 👌🏼

@BasementBrandon

Жыл бұрын

I think if it came down to me wanting more pieces that may be a route I'd explore too. But right now I love my fixed set and the versatility of the Iron Bear.

@RoryEllisMusic

Жыл бұрын

@@BasementBrandon for sure. I only have fixed DB’s up to 50 in 5LB incriminates so I wouldn’t be losing anything really in upgrading to these.

Thank you for the honest review.

@BasementBrandon

Жыл бұрын

Always!

Thanks for sliding these up to the front of your review queue, they definitely seem to be heavy adjustables everyone is talking about. I would be curious about what movements are a bit awkward with the slides, like db goblets.

@BasementBrandon

Жыл бұрын

For me overhead tricep ext were a bit wonky, mostly b/c of the sharp edges and my poor should mobility.

Great review! I would have loved to see you hold the dumbbell and press the dumbbells while it was set to a middle weight. I'm specifically interested in seeing the balance of the dumbbell in the between settings.

@BasementBrandon

Жыл бұрын

Next time!

Funny thing about drop tests.. I have seen fixed dumbells 100+ lbs that were bent up from idiots throwing them on the horsestall floors. These things seem pretty sturdy, I like them.

@BasementBrandon

Жыл бұрын

thanks for taking a look!

ahhh cant wait for these, great review as always. They look super beefy

@BasementBrandon

Жыл бұрын

When are yours coming in?

I was wondering what number you got! I'm number 4! I also got the stand and heavy handle kit. Because I ordered it with the heavy handle they etched the numbers appropriately so it reads 30-130 on the rails. They feel like the best of all worlds adjustable dumbbells to me.

@BasementBrandon

Жыл бұрын

Ah was not aware, that's cool to know!

@MoeMoe-do1fd

Жыл бұрын

Where did you see the heavy handle kit? I can’t seem to see find the kit.

@garrettsolberg9100

Жыл бұрын

I should clarify, production was taking longer than anticipated, so he emailed me about a discount and informed me of a future stand and heavy handle add on. I asked what it might look like, and he sent a prototype photo and its really 2 additional plates that bolt to the inner plates of the handle. There is less handle room now but I've got fairly meaty paws and they fit just fine, no rubbing. Not sure if you need to email him for the add on kit??

@MoeMoe-do1fd

Жыл бұрын

@@garrettsolberg9100 thank you for responding! I Definitely should contact him. Been wanting adjustable dumbells over 100lbs these seem to be a good fit.

@benbarnett1076

Жыл бұрын

I couldn’t find where to add the heavy handle kit when I purchased. But it’s cool, I use 20s more than 130s Edit: nvm should’ve kept reading

Will be waiting for the pepin hd review. That's more up my alley.

@BasementBrandon

Жыл бұрын

Right on!

Very random comment, but these are made in North America, specifically Beauce, one of the great entrepreneurial regions of Canada. It is amazing to see a small company make such an amazing high quality product, very innovative 💪

@BasementBrandon

Жыл бұрын

Appreciate the insight!

They’re probably the best out there. That price is honestly justified given the manufacturing I would imagine they take - but there is no way I could do that. It’s just too much.

@BasementBrandon

Жыл бұрын

Fair enough!

best review ever! thanks unc

@BasementBrandon

Жыл бұрын

Thanks my dude.

Iron Masters can go to 180 lb with heavy handle kit and the 120 and 165 lb upgrades. The heavy handle kit does make them more like a regular dumbbell due to the long handle dropping to a regular handle length. I have the 5-50 lb pairs of Rep Fitness urethane dumbbells and have no space for more. I use the Iron Masters for in between weights and greater than 50 lb weights. I don’t mind the change times. I would probably get the Pepins if I didn’t already have Iron Masters, which was my first weight lifting equipment.

@jamesporter2494

Жыл бұрын

I have Iron Masters and bought the 125lb upgrade. Love them.

@BasementBrandon

Жыл бұрын

Even though the option to upgrade that much sound great. I've met only a handful of people in my days that would actually use that heavy of a DB lol.

@markhalstead2386

Жыл бұрын

@@BasementBrandon 120 lb is all I would ever need and know most people do not get the 165 lb upgrade.

For your follow up video, can you check if it’s possible to put a microgains 1.25 and 2.25 on both sides of the handle and still have room? That’d let you hit the 7.5 increments as well while staying balanced

@BasementBrandon

Жыл бұрын

I don't have the 2.25 set but we will see!

Great video . Thank you Sir.

@BasementBrandon

Жыл бұрын

Thanks for taking the time

Great solid review

@BasementBrandon

Жыл бұрын

Thanks dude!

@SurfTomas

Жыл бұрын

@@BasementBrandon since the very first video I commented on 10 years ago, you still make it a point to respond. You Sir live the Stay Big mentality!

These adjustable dumbbells are perfect for people who don't have the space for 5-100 urethane sets. I really like how these look compared to powerblocks and the amount of metal on there plus its Canada made. I already own 5-75lb vulcan urethane dumbbell set for $2700 shipped which is a steal so for me if I were to pay $700 more I would still pick the urethane set since I have the room in my garage. If I didnt have the space in the garage or budget I would go for the Pepins. I wished they would design it in a way where its closer to nu bell but with more metal because I don't like caged adjustable hands for more comfort so my wrists wont hit anything. Just remember the more dumbbells means you are able to work out with partner or buddy during dumbbell sets. These pepins look quality so I might change my mind one day.

@BasementBrandon

Жыл бұрын

Some good points here!

The all steel construction really does it for me. Ooohhh yeaa, dig it.

@BasementBrandon

Жыл бұрын

It's over the top in the best way lol

How is reracking after a hard, heavy set? I find aligning my Powerblocks can be difficult when I'm gassed. Great review brother! These look to be the new standard of adjustable dumbbells.

@BasementBrandon

Жыл бұрын

The 120s can be a bit tough depending on where the cradle is. For me too I think I should play with where the ends bolt on as they allow you to adjust width some. I imagine if it’s dialed in, it would be harder to “miss”.

@BrandonSchwartz1

Жыл бұрын

@@BasementBrandon do you mean like slightly loosening the bolt-on pieces? I’m having trouble imagining what you’d tweak

@BasementBrandon

Жыл бұрын

@@BrandonSchwartz1 The 2 pieces of the cradle that stick up and hold in the end plates bolts on. There's about .5" of adjustability on either side. If you push them both all the way in, it may be too narrow to rerack the handle unless you're 100% dead on.

When these first came out I was for sure getting these but now I’m thinking about just going with iron master. These are amazing but Id rather save the difference and buy something else for my gym

@BasementBrandon

Жыл бұрын

Fair enough!

I bought the bow flex adjustable ones like 3 years ago. They still are as good as day 1. That being said I’ve always been careful not to be rough when putting them down. Edit: that being said, when I bought them they were not as marked up as they are now. I would not pay over $250 for them again.

@BasementBrandon

Жыл бұрын

Appreciate the feedback!

Good job as always, Brandon. I have Nuobell and like them but you do have to be careful just putting them back in cradle which is a bit of a PIA.

@BasementBrandon

Жыл бұрын

Just one of the tradeoffs of this style I think :(

Great review! I've been loving my set. My only real issue is the offset adjustment isn't ideal, but it hasn't been a major problem so far. I've also been looking into either the MicroGianz or PlateMate (magnetic) adder plates for both 2.5 and 5 lb adjustments. The bonus of getting those is I can also use them on my lat pull down/low row. I definitely agree on the value of these. They are expensive, but well worth it compared to the alternatives for a similar weight range. The adjustment speed is worth the extra $600 to me versus the iron masters.

@JBS7551

Жыл бұрын

I got the platemates for mine and it works great 😀

@gavinmarion91

Жыл бұрын

I was thinking the same thing with the 2.5lbs micro plates.. I just don't know if it would fit well with the side rail.. looks like the 1.25 micro plates just fit. But if the 2.5lbs ones fit that would fit the counter balance problem

@fwiffo42

Жыл бұрын

@@JBS7551 great to hear!

@fwiffo42

Жыл бұрын

@@gavinmarion91 yeah, that’s my concern with the MicroGainz and why I’m leaning towards platemate.

@BasementBrandon

Жыл бұрын

I just pinned my comment, but Pepin will also be releasing magnet sets for 5lbs and 2.5lbs jumps if people prefer.

I should have waited……..the day after I ordered my stage 3 for the powerblocks…….you drop this vid. Oh well. On another note……I love to see you out there commenting on smaller channels!

@BasementBrandon

Жыл бұрын

Lot of those channels put out better content than the bigger ones!

I like them and feel that they are overall worth the price. Thanks for sharing this content.

@BasementBrandon

Жыл бұрын

Thanks for taking a look!

Was going to get these but now going to wait for version 2.0 if that is coming out. I prefer thinner handles for dumbbells so wish they had 28mm or less. For dumbbell drop tests I would say slightly above the knees with is the max height they should be dropped from.

@BasementBrandon

Жыл бұрын

Right on! I know he's working on planning the next versions.

I sold my elite powerblocks and went with the rep set. Unless I had very limited space I would never go back to selector dumbbells. Good to see another alternative though

@BasementBrandon

Жыл бұрын

Yeah if I wanted to I could prob ditch my fixed and open up a whole wall for more equipment but tbh my wife does a shit ton of DB work and supersets so it would not go over well lol.

If memory serves me right 5-50 in dumbbell pairs is 550 pounds, 55-100 is 1500 or 1550, and 105-125 is 1150 pounds. Adjustable dumbbells make the most sense the heavier you go.. I prioritize durability and quick change but I sacrifice feel with my power blocks going to 125 and use DB Olympic handles for heavier than that. Not a fan of the the giant power U175 blocks just too wide for me.

@BasementBrandon

Жыл бұрын

Yeah a lot of preference will always dictate buying decisions.

I have powerblocks 90 and have been looking to get something in 120. Definitely considering these

@BasementBrandon

Жыл бұрын

I think they make a powerblock that goes up that high as well, no?

@hyg71886

Жыл бұрын

@@BasementBrandon ya they do but i can’t find that for the model I have it only goes to 90

100% agreed on the drop test. The demonstrated drop test is a good example of a natural “drop.” Just throwing the weights around has always felt…obscene to me. I don’t get why people are comfortable doing that.

@BasementBrandon

Жыл бұрын

Appreciated! Some still aren't happy, but I tested them how I would use them, which is all I need 😅

Pepin is great. I’ve got their spinners and they’re holding up great.

@BasementBrandon

Жыл бұрын

Really nice quality in my pieces from them.

I'm excited for these. I'll save up, so hopefully ny the time I get enough cash a new revision comes out. The upside for these are going up to 120lbs each. That's a real good weight.

@billfrigo7602

7 ай бұрын

What’s the release date for the revision?

Do you think something like spot grips would fit with these? The side bars for selecting weight seem like they would get in the way but not sure on this.

@BasementBrandon

Жыл бұрын

I've never owned any so can't really say!

Great review Brandon! I think these are very nice and are a great value. Yes, pricey, but as you explained, WAY cheaper than sets and the small footprint is what I like most. These would be a significant improvement to my trusty Bowflex ADs; the handles and the all steel construction plus the high weight increments are all great.

@BasementBrandon

Жыл бұрын

Thanks for checking in Marcus!

Do you know if the Mad Spotter Hooks will work with these? Good to know for going really heavy for some folks.

@BasementBrandon

Жыл бұрын

I don't believe the Mad Spotter Pro hooks will as they have a max handle girth of 32mm.

How do these feel when holding them vertically, like for doing dumbbell french presses or dumbbell pullovers? Do the side rails get in the way?

@BasementBrandon

Жыл бұрын

Ah you know I had a clip of my doing overhead tricep extensions but forgot to show it. It's doable, a bit awkward, but the thing for me (who has terrible shoulder mobility), the the metal plates don't feel great if you whack yourself in the neck.

@JBS7551

Жыл бұрын

I do pullovers with these and took a bit to get used to but I like it and works well

I’d love for your video to cover the safety of the locking mechanism. How prone or likely is it to accidentally unlock these mid-lift?

@BasementBrandon

Жыл бұрын

I think if it were to unlock anywhere it would be on the drops. While lifting there's nothing that should jar it loose.

Hey Brandon, How do you think they will handle in a garage setting? Due to the humidity. I wonder how they will hold up. I wonder if they are going to rust right away due to the all metal.

@BasementBrandon

Жыл бұрын

I do think they'd oxidize over time, but not any more than other metal equipment in the gym.

If Nuobell released an all metal version with metal internals they could crush the market. Anecdotally I'm scared to drop mine, but they've survived a few so far. The worst one being when I was doing incline AMRAP, my balance got messed up towards the end and instead of crushing my face, I threw one of them with 80lb on it, and it's been fine I also found some urethane 90s, 100s, and 110s locally for 450$ total so I'm set for years and happy

@BasementBrandon

Жыл бұрын

Check out Snode, that's basically what they are.

@user-fi6hg8vq6c

Жыл бұрын

@@BasementBrandon Was just about to mention snode. Have you reviewed those?

@BasementBrandon

Жыл бұрын

@@user-fi6hg8vq6c I have not!

I'm seeing other fellow Europeans that crave this product. Maybe one day 🙏

@BasementBrandon

Жыл бұрын

🤞

These are so sick. Just hard to justify dropping 2k for me when dumbbells would just be secondary work for me (I do think the pricing is fair because they replace an entire set) I think I am going to get the bolt fitness octobells that go to 80 lbs in the coming months.

@MelloHubb

Жыл бұрын

I have those. Love them. Literally just like nuobells except in a octagon shape. Knurling is very passive though if you care about that. I have the bolts for accessory and then for heavy db work I have a pair of loadable dumbells but since I powerlift most of my workout is barbell with dbs being accessory work... If I could do it all over and get either these or the setup that I already have, I would probably still get the set up that I have since I saved close to a grand.

@BasementBrandon

Жыл бұрын

Yeah I agree. I got away without DBs in my home gym for a long time and believe I could still do so if I wanted.

@user-fi6hg8vq6c

Жыл бұрын

I have the same set. Valid concerns for peoples comments on the plastic but I haven’t seen any reports of major or minor failure of Nuobell style dumbbells but time will tell. I love my set. My only regret is not getting the military green versions lol

These look absolutely amazing, and I'm definitely considering upgrading from my DB-15 to a pair of adjustable dumbbells this year. I tend to prefer using a barbell or cables for most of my back work though, so I'm leaning more toward the Nuobells but not set on anything yet

@BasementBrandon

Жыл бұрын

Yeah if you don’t need to go over 80lbs, nuobells are a great option.

@BradHanssen

Жыл бұрын

@@BasementBrandon Fair. I'm pretty sure I'd use them for either biceps or lateral raises 99% of the time

@walkyman22

Жыл бұрын

@@BradHanssen I've had the Nuobells for a year and had to replace one of the handles because it was shaking and would sometimes lockup when trying to lift it off the cradle. They only give 2 years warranty and to add an additional 3 year warranty it is $65. I wish the Peppin fast series was in the States.

@jq9474

Жыл бұрын

They look great. I wish this video would have been posted a month ago. Just bought nuobell

For the algorithm… great review man!!

@BasementBrandon

Жыл бұрын

Thanks my brother!

you're making think of selling my powerblocks brandon... 90 lbs is too light, i need some 120s.

@BasementBrandon

Жыл бұрын

Sorry 😅

@basementbrandon Hello! Enjoyed this review, especially now that the Repin version is coming out and look very promising. Question for you about these - is the cage on each one annoying or don't really notice? Let's say you wanted to use straps for a heavy back row to conserve the grip, is there enough room to get the straps around the handle? Thanks, sir!

@BasementBrandon

Ай бұрын

Annoying only for certain exercises to me. Like when you’re doing two hand overhead extensions or pullovers.

@jared.freedom.gym2021

Ай бұрын

@@BasementBrandon got it, thank you. I’ll get to put hands on the prototypes at HGC next weekend, just saw something mentioned about these not being conducive for straps and was curious if your take. Thanks again!

@BasementBrandon

Ай бұрын

@@jared.freedom.gym2021 They did make it a bit more difficult, but I rarely use straps so I could just have bad form 😅

Is there any rattle between the plates? I'm curious if they feel just like a fixed dumbbell or maybe more like a slightly loose spinlock dumbbell, where there can be some play with the plates during use.

@BasementBrandon

Жыл бұрын

If you change directions forcefully you'll hear a quick rattle, but otherwise pretty quiet to me.

How do these feel in regards to balancing the load (like a round dumbbell). My gripe with IM is because they are square they weight gets thrown off center due to gravity if not parallel with the ground. Sometimes happens during heavy pressing, or even flys, curls, etc. which is noticeable to me compared to my urethane dumbbells. How do these compare with the octagon weight distribution?

@BasementBrandon

Жыл бұрын

I never ran into that issue with my IM, so I'm not sure my answer would help here.

So I know a week ago I said IM was the route I was going but after watching this review 100 times I think you’ve sold me on Pepin! I’ve just got one question that will be the final factor. Money not being a factor, are you picking Pepin over IM for durability and feels “most like” a regular dumbbell? Thanks for giving honest reviews btw!

@BasementBrandon

Жыл бұрын

Money not a factor I would pick pepins b/c I'm more likely to use them due to the adjustability. IM still wins in durability and feel since it doesn't have the rails, but I found myself not using them as often b/c of not feeling like changing weights.

@Nick-1828

Жыл бұрын

@@BasementBrandon thank you! Can’t wait to put my order in!

@JBS7551

Жыл бұрын

@@Nick-1828 If it helps at all, I have IM and fast series. Now I only touch IM when needing under 20lbs lol

@Nick-1828

Жыл бұрын

@@JBS7551 thank you! Have you found the bars on the side of the Pepin get in the way for anything? Regardless, I’m sold on Pepin and as soon as I can I’ll be placing an order lol

@JBS7551

Жыл бұрын

@Nick I thought I'd hate the rails but really don't mind them at all, they give a lot of rigidity! Plus it's not like a cage, like powerblocks I'm able to do pullovers, OH triceps extensions, etc. Unless you have giant hands, I don't think they are an issue!

Sounds like a good product 👌 and free is always a good deal❗

@BasementBrandon

Жыл бұрын

If it's free, it's for me!

I prefer the nuobell switching style but the all metal construction on Pepin is more durable. Merry them up get the best of both worlds. That would be the optimal design.

@BasementBrandon

Жыл бұрын

I've heard of a few people having issues with the mechanism, so I worry that may not be the best solution.

Any idea if these are compatible with kettle gryps or monkeyfeet? These are two small versatile pieces of equipment I want to use with whichever adjustable dumbbells I buy as I will probably not have space for a rack initially and would open up adjustable dumbbells to a range of different movements. One of the key reasons I've ruled out PowerBlocks and IM (with two handles) are where I'm likely to go

@BasementBrandon

Жыл бұрын

I'm not sure as I don't own them. You don't have a ton of room to maneuver. Based off look, I'd assume the Kettle Gryps would work but don't think the Monkey Feet would.

It looks like these are the best around currently for a blend of quality and quick adjusting while going to a good weight.

@BasementBrandon

Жыл бұрын

I think if someone is looking for quick adjustable and as heavy as possible, they're hard to beat.

Does the cradle have to be flat or can you use an angled stand? Seems like with the stand at an angle the extea weights would fall over when you take the handle out.

@davidoss15

Жыл бұрын

Cradles must be on a flat surface for proper functionality. But plates can't fall as they are held by the support, even at angle.

@BasementBrandon

Жыл бұрын

I see david answered. I would think angled would work as the end of the cradle has a female end to lock plates, but racking would be awkward.

Other than using the fix you showed at the end of the video, Brandon, are there any adjustable DB sets that have a in-place 2.5 increment increase ?

@rdzrepresent

Жыл бұрын

see on my channel. 4-41 kg increments 1.5 kg

@BrandonSchwartz1

Жыл бұрын

I believe Bowflex Selecttech can make 2.5lb increments up to a certain weight but then you have all the other downsides of Bowflex (plastic parts, DB length is always the same for all weights, etc)

@BasementBrandon

Жыл бұрын

I'm not sure TBH!

Is it a hassle to use with straps due to the guide rails (like for heavy DB rows)? It was pretty annoying with powerblocks, but these seem like there's probably enough clearance for it to not be much of a problem.

@BasementBrandon

Жыл бұрын

I'm not sure TBH, I haven't tried!

"nature of the beast" - only commenting that because you suggested the comments would contain a correction. great video, thanks!

@BasementBrandon

7 ай бұрын

🙏

I'm really surprised by all of the comments on pricing for these. No, it's certainly not what I would call cheap but for what you get I think the value is great. I have a set of 5-75 rubber hex dumbbells from Rep. I recently looked into expanding up to 100, the 80-100 set is currently $1,550. So I thought I would just buy a pair of 80s, 90s, and 100s and get a set of the 2.5lb Microgainz (I already have the 1.25s); but I was quoted $1,200 for just those 3 pairs from Rep and then it'd be another $145 for the Microgainz. Or I could get a set of the Fast dumbbells which go up to 130lbs for $2,020 shipped. I don't really need them but I have been incorporating more dumbbell work into my programming and man am I on the fence about it.

@BasementBrandon

Жыл бұрын

Yeah I tried to frame it up for context, but I wonder how many have priced out similar dumbbell options.

Would these work on a slanted surface? I have the Titan dumbbell rack that I really like how it’s angled to lift my ironmasters from, and I’m curious if these Pepin’s only work on a flat surface. These dumbbells would be an instant buy if Pepin could figure out the 5lb increments. Sure, you just tack on 10 on one side, but I feel like for the money, should have designed it with 5lb increment dials

@JBS7551

Жыл бұрын

They work only on a flat surface. And the 5lb increment balance isn't an issue, trust me

@BasementBrandon

Жыл бұрын

He suggests flat surface only. They are in the process of coming out with magnet plates for both ends if you don't want to do the 5lbs jumps the way I show.

That looks good to be honest especially for a garage gym db setup

@BasementBrandon

Жыл бұрын

Def on the hardcore side!

I would feel worried the adjustment plate would go through my forearm/slam or hyperextend my wrist if something bad happened on a heavy rep / if something slipped ... probably why I've never liked the powerblocks either. They look great, just worried about too many spots for catching your hand/forearm if it goes bad...

@BasementBrandon

Жыл бұрын

Makes sense! On the bright side, lifetime warranty could be extended to your wife 😅

They're $1700 , but another $300 for shipping. That's worth noting. If comparing to the price of Iron Masters, Iron Master is free shipping.

@JBS7551

Жыл бұрын

I have both these and iron master but man, fast series takes the cake

@gtlandis86

Жыл бұрын

@@JBS7551 I ended up selling my Iron Master 5-120lb dumbbells for the same reasons mentioned in the video. They don't take THAT long to change, but long enough for me to not want to mess with them, especially when training with limited time. I bought individual DBs up to 65lbs, but really want the Peppin Fast Series -- I just don't think I can justify the cost.

@JBS7551

Жыл бұрын

@gtlandis86 Yeah adjusting the iron masters gets to be a real pain, especially when needing to do big changes. I may sell mine and get a solid set of metal adjustables that go from 5-50, I don't know of a good brand for that yet

@BasementBrandon

Жыл бұрын

Yeah shipping needs to be considered but I think the point still remains the same. For the features they offer the price point is still relatively low in context.

@gtlandis86

Жыл бұрын

@@BasementBrandon For sure, no matter how you look at it, adjustable dumbbells will be cheaper than individual dumbbells. It's just a matter of finding the ones you like the best from a form/function and durability standpoint.

I placed a pre order on the REP version but I actually may just keep my Noubells being tight fit if your wearing a watch or wraps

@BasementBrandon

Ай бұрын

Right on

20+ min video means you can sneak in enough double entendre’s to get demonetised haha. Finger the edges, putting it in the female end 😂. Plz talk to Mr Pepin about getting someone in Aus to stock them (cough *gym and fitness*) so I can replace my Iron Masters cos these look sick! Love the long form content my man!

@BasementBrandon

Жыл бұрын

I just black out and finger stuff until I wake up. Glad this one turned out ok.

These are awesome. I am actually a fan of power blocks. But, shortly after getting my set, they released new models and it is unclear that I can get the previous expansions (this is now years later). One reason I went power block was the kettlebell handles. I got all this when all I had was a bench and powerblocks. That versatility was huge. Any idea if they have a kettlebell solution? I am about to start exploring kroc rows. If my powerblocks don’t cut it (and can’t be expanded further) these will be in my future. As always, great review!

@BasementBrandon

Жыл бұрын

I believe he made one or is making one.

@dleute

Жыл бұрын

@@BasementBrandon I see a "new product" for adjustable kettlebell. But they look like they will be light weight by comparison to the 120lb fast. I think using a landmine and handle I already own is going to be the better option for now. I had done meadows rows in the past. Kroc rows just sound more fun. Powerblocks go up to 175 now. That's pretty cool.

@rayjbb1494

Жыл бұрын

I had asked if these were compatible with kettle gryp handles? Coop regularly recommends them so that's always something to try if Pepin don't have their own solution

Oof 2700$ CAD including shipping out here to Alberta for the 120’s. I’ll stick to my barbell and plates for now but the steel construction and lifetime warranty is pretty attractive. I’ll definitely be keeping an eye on these.

@BasementBrandon

Жыл бұрын

Def a commitment!

I have been thinking about selling my power blocks to get something like this. Due to some tendinitis I have been using Versa Gripps again. Is there enough room in the handle to use Versa Gripps?

@BasementBrandon

Жыл бұрын

I don't own any, but I would think so.

Those are great super heavy dumbbells...but they should include the stand because one might get injured when hoisting those weights with the cradles on the floor

@BasementBrandon

Жыл бұрын

Most DBs like this do have stands but they are not often included in the price.

I just got mine and the quality is outstanding It makes my 90 pound powerblocks look and feel like a kids toy

@BasementBrandon

4 ай бұрын

Most adjustables have some tradeoff. I like the quickness to change PBs, but they just feel so awkward to use.

I like the idea of these but see too much plate movement which was one of the many reasons I had to ditch my powerblocks and pickup my current Iron Master set. Plus there still isn't anything that will get as heavy as IMs with their heavy handle kit installed. Heavy Dumbell presses are a crutial part of my training and has helped my bench tremendously. I would enjoy using these for a quick workout or dropset but they would never replace my IM

@BasementBrandon

Жыл бұрын

Right on, I don't find much movement with these!