Incredible work! And thank you so so much for no unnecessary music or commentary!!!

@TheMetalist

3 ай бұрын

Thank you 😊

@runsolo7418

2 ай бұрын

Exactly! Let me listen to what I like, while I watch the DIY bending machine come to life.

This guy is not only an artisan level craftsman but a talented engineer.

@TheMetalist

2 ай бұрын

Thank you 😊

@rogerbrandt6678

29 күн бұрын

@@TheMetalistI’ve ran brakes for years, you could make a smaller bottom die for a tighter bend, or even put a smaller piece of angle iron in and your radius will be a lot tighter.

It's refreshing to see people still know how to work hand tools. And well! Nice tool 😘

@TheMetalist

3 ай бұрын

Thank you 💪😁

It is this moment where I am most thankful for my CNC milling machine 😂 Perhaps I am too lazy to be this creative with tools. Amazing outcome with basic tools. Bravo.

@barrylinkiewich9688

3 ай бұрын

Same, I'd have done a whole bunch of this on the laser at work while sipping a drink. I don't wanna work this hard haha.

@mcamodell

2 ай бұрын

BASIC tools?!?!? WTF? There nothing basic about those tools, you cannot even FIND those in a normal hardware store

@lainethm

2 ай бұрын

@@mcamodellThose are not basic consumer tools but pro grade tools. I think @Factory400 ment hand tools.

@mcamodell

2 ай бұрын

@@lainethm "Amazing outcome with basic tools"

I bought your welding table build plans and it was great step by step. I've been searching the web trying to find a good drill tap set. Can mention what taps you use and counter sink bits you use in your builds. Your fabrication builds are the BEST I've seen. Thanks for sharing your builds with the world 🌍🙌

Schade das nicht jeden Sonntag ein Video kommt mit geilen DIY Sachen. Wieder einmal eine geile Vorrrichtung die du da gebaut hast 👍🏻

@TheMetalist

3 ай бұрын

Ja jede Woche das wäre schön vl klappt das irgendwann mal 😉

Why did I watch this?! 😂 I now see more tools and bits I need to buy. My wife is NOT going to be pleased. Really nice work!! Thanks for taking the time to show us. I’ll see if I can put it in the mix for this Summer’s projects.

@TheMetalist

2 ай бұрын

Awesome, thank you 😁

When he turned it upright & used it as a press break........................I literally can even!!!! 🤯👌

@TheMetalist

3 ай бұрын

😊

I like your bender. Also a crafty guy, I appreciate the work of others. You do a lot with very little.

Your skills are simply ridiculous. Well done sir.

@TheMetalist

3 ай бұрын

Thank you

Allein die gleit-Führung mit Gewinden drin ist eine super-Idee. Da könnte man mit extrem wenig Aufwand eine Rollen-Biegemaschine draus bauen: 2 Rollen anstelle des "V-Amboss" und eine Rolle statt des beweglichen "Hammers" (keine Ahnung wie ich's ausdrücken soll). Dazu zusätzliche Gewinde in den Grundkörper in der Nähe des Hebels. Da könnte man dann eine Halterung mit Schraube als Press-Spindel befestigen um die bewegliche Rolle Richtung fester Rollen zu drücken.

@TheMetalist

3 ай бұрын

Vielen Dank 😊 Ja das stimmt dachte mir auch schon sowas bloß die Idee mit dem gewinde die hatte ich noch nicht 😅 aber da kann man so viel verschiedene Matrizen bauen. Vl mach ich noch eine teil zwei für in dem ich mal alle Ideen verwirkliche 😅

First off - AWESOME build!!! Secondly - DANG I am glad I own a mill 😀

@Factory400 12 часов назад It is this moment where I am most thankful for my CNC milling machine Perhaps I am too lazy to be this creative with tools. Amazing outcome with basic tools. Bravo.

Du machst wirklich klasse Werkzeug, klasse und pragmatisch

@TheMetalist

3 ай бұрын

Vielen Dank 😊

I like that you brazed your channel name into the table

Wow... That's a lot of work for a 30 second slot. I hear Bridgeport calling your name!

You've got some really cool toys, and good ideas.

Love it - we made a small press for bending inside corners on letters - but it is hydraulic - this is a great project! I will use it as inspiration for the next build for sure!

@TheMetalist

2 ай бұрын

Thank you 😊

Show off :D - хаха Btw - nice work man. Good for you. You are a true craftsman. Respect !

@TheMetalist

3 ай бұрын

Thank you 😊

Someone get this man a Bridgeport!! Bravo my friend. Great work!

@heckyes

2 ай бұрын

What is a Bridgeport? I dunno if that's a tool or like a fancy drink?

@erik_dk842

2 ай бұрын

@@heckyes A professional milling machine - knee mill

@Mike-lt6sj

2 ай бұрын

​@@heckyesIt's an engineering tool, really. If you have a bridgeport and a lathe, you can build all kinds of machines like I do.

Awesome. I need exactly one of these. I've been following a long time. Im really glad to see how you've grown from building your own bench to where you are now. This is an awesome custom tool.

🎉🥳💪🏻👍🏻 wieder geil, das Video und das Ergebnis. Jetzt kann ich gut schlafen 😁

@TheMetalist

3 ай бұрын

Vielen Dank 😊

Don't be sure if i like more the simple design or the functionality. Great project 👍 Just to the right time on a sunday evening a good movie...this is what it takes 😆 I am excited what's up next 🙌

@TheMetalist

3 ай бұрын

Thanks you 😊 nächsten zwei Projekte werden etwas einfacher😅

Salut le BOOS . vous êtes super grave . merci pour le bendeur à mollets multiples. Big j'aime ! W

I love that third ✋. 👍😄

on my old job i had the hydraulic 40 ton version of this. So cool of a machine for custom fabrication work.

Well done! Especial since you don’t use a milling machine to fabricate. One comment. Use a tapping fluid.

@TheMetalist

3 ай бұрын

Thank you 😊 yes i missed it for a couple of sec 😅 but the bit is still good

@michaelmetzner3981

2 ай бұрын

Hello Dirk, once again great work, I'm thrilled! Best regards, Michael

@TheMetalist

2 ай бұрын

@@michaelmetzner3981 vielen Dank...hab dich nicht vergessen 😉

@AndrossUT

2 ай бұрын

The man has to be doing stuff infuriating on purpose. He literally just took a piece off the drop saw and then cut the miter with an angle grinder right after. Sweet Jesus

@AndrossUT

2 ай бұрын

Also straight up welding and cutting that tube just to use as a fence...

Beautiful. A real pleasure in watching you work. All the small details, chamfering the holes and edges. Neat tool for breaking the edge on your slots too. Great bender, great work. Thanks.

Almost a sideways arbor press! Neat!

Always enjoy watching your work!

@TheMetalist

3 ай бұрын

Thank you 😊

Dirk, there is no stopping you, my friend!!! 🫵r #☝️ Awesome Invention!!!👌 👏 👍

@TheMetalist

3 ай бұрын

Thanks a lot Silver😊

Cool, das schreit eigentlich nach einem käuflichen Bausatz! 😊

Gefällt mir immer wieder sehr gut was du machst.

@TheMetalist

3 ай бұрын

Vielen Dank 😊

Einfach nur geil dir zuzusehen. Das ist ganz tolle Handwerkskunst und super um sich Inspirationen zu holen👌

@TheMetalist

3 ай бұрын

Vielen Dank 😊

That mag drill is soo compact. Man the ones I've used were 3-4 times the size

Nicely done and well thought out, thanks for sharing. Charles

@TheMetalist

3 ай бұрын

😊

GREETINGS FROM ARGENTINA! CONGRATULATIONS

Outstanding design! The versatility of this unit really shines through.

another brilliant design , an idea came to me when you upended the machine "vertically" this would work perfect for (dimple dies) i will be constructing one for myself in the future , thanks for sharing

@TheMetalist

3 ай бұрын

Thank you 😊 Awesome send me some pics if it's ready 😁

Very clever, and well done!

@TheMetalist

3 ай бұрын

Thank you 😊

Great tool, good job thanks for sharing.

Definitely interested in build plans when this hits etsy.

@TheMetalist

3 ай бұрын

Thank you 😊 Plans are online

Oh Mann, einfach geil! Ich bin gerade an 2 Projekten von dir am Nachbauen und jetzt kommt das nächste Ding auf meine Wunschliste. Ich hab schlossern als Hobby angefangen und deine Pläne sind echt dankbar für Noobs wie mich ;) Ich lern echt viel dabei und es macht Spaß. Und vor allem wenn man es selber macht, merkt man erst wie viel Arbeit das ist. Auf jeden Fall, danke für deine tollen Projekte!! Du tust dir da echt was an.

@TheMetalist

3 ай бұрын

Vielen Dank 😊 Ja ist ja auch mein Hobby 😁

great job

Brilliant design. Great video! 👍

Very well put together.

Awesome bending tool, I fully plan to make one of these! Thanks for sharing

Damn you! I love it. You have made me want something that I didn't know I needed.

Fantastic, you always do complicated things with basic tools and very well thought out construction !

Such a cool project, well done! 👏

@TheMetalist

3 ай бұрын

Thank you 😁😉

Perfection. I am a flooring guy and I wasn’t able to take my eyes off the screen. Thank you so much for the excellent editing!

Your an absolute wizard, very nice.

Well done

@TheMetalist

3 ай бұрын

Thank you 😊

BRILLIANT as always!!

Nice tool! Unfortunately I cannot build one myself as I don't own a laser engraver!

@TheMetalist

3 ай бұрын

😅😂👍

That is so smooth! I like your designs cause they just work so many ways👌🏻 Metalist you are the beast😎!

@TheMetalist

3 ай бұрын

Thank you 💪😊

Your technique is spot on. Excellent craftsmanship 💯

Coole Idee. 👍Spiele seit längerem mit dem Gedanken mir eine Zahnstangenpresse zu besorgen. Das scheint ne tolle Alternative zu sein!

@TheMetalist

3 ай бұрын

Vielen Dank 😊 Zeichnungen will ich auf Dienstag fertig haben. Bin gerade noch dabei ein paar sachen zu verbessern 😁 Grüße

You are the best my guy.

@TheMetalist

3 ай бұрын

Thank you 😊

Excelente Fabricación de muy alto nivel

@TheMetalist

3 ай бұрын

Merci 😁

Amazing. As always. Great work

@TheMetalist

3 ай бұрын

Thank you 😊

That was awesome bro Way cool

Vraiment top ! bravo et merci ...

As usual, magnificent job 👏🏼🫡

Großartig Maestro 👌👍💪👏👏👏👏

@TheMetalist

3 ай бұрын

Vielen Dank 😊

Great work as always Dirk... Just a thought you could put a crank handle and 2 fixed bearings to make a radius roller.. I know you have a dedicated Heavy duty one.

@TheMetalist

3 ай бұрын

Thank you 😊 Yes not the first one who mentioned that

Well done Brother!

@TheMetalist

3 ай бұрын

Thank you 😊

merci beau travail !!

@TheMetalist

3 ай бұрын

Merci 😁

Awesome work and good show of skills and thought :) - keep it up One day i hope i live somewhere were tools and materials aren't so expensive that I can do projects or have fun making stuff without the thought of the repercussions of not having food or a roof over my head (Life can be hard but doesn't mean not to dream)

Interesting project.

@TheMetalist

3 ай бұрын

Thank you 😊

Nice!

Outstanding.

@TheMetalist

3 ай бұрын

Thank you 😊

Pretty slick! Very useful too!

I don't know why this channel wasn't recommended to me sooner. KZread owes me an apology.

@TheMetalist

2 ай бұрын

😅👍

@construedcustomz5839

2 ай бұрын

For real

@dylankrise6976

Ай бұрын

I second this!!

Beautiful work

@TheMetalist

2 ай бұрын

Thank you 😊

This is legit. Nice job, dude!

Great Job Mister 🤠👌

@TheMetalist

3 ай бұрын

Thank you 😊

This is awesome

@TheMetalist

3 ай бұрын

Thank you 😊

What a brilliant video! thank you

Incredible nicely done wow.

Very impressive!

That things legit to have bent that last piece.

install roller bearings on the tooling you used to make the hoop and a crank handle, and you could roll steel. awesome stuff sir.

You should make a depth set and lock for the handle and three roller wheels and a hand crank for the roller wheel on sliding mechanism For rod and flatstock rolling.

@TheMetalist

3 ай бұрын

Thats a nice idea 😉😊

Finish was very impressive, 6mm thick

VERY NICE !!!! Love it.

Beautiful love it

Nicely done!

@TheMetalist

2 ай бұрын

Thank you 😊

Nice tool great video.

very nice

Saludos desde Argentina

@TheMetalist

3 ай бұрын

Hi Greetings from Germany 👋

Cool tool!

Hello from France, Thank you for all yours video, you are creative and inspiring. What is the screw-tap brand you use with your hand drill ? It could be very interresting to show or to put in description all the tools and brand you use set a side yours sponsors. Thanks for your videos I reproduced some of your project

@TheMetalist

3 ай бұрын

Thank you 😊 the tabs are from ruko. Yes i plan a shop tour 😅

Awesome and thank you!

Wow nice job!

Megageil was Du da wieder gebaut hast ,super finde ich auch den Fräser oder die Rotationsfeile und den Anfasfräser ,wo gibt es das zu kaufen? Grüße Marko

@TheMetalist

3 ай бұрын

Vielen Dank 😊 das gibt's alles von Pferd Grüße Dirk 👋

@markoheimburger9895

3 ай бұрын

@@TheMetalist Super vielen Dank 👍😁

Awesome tool. Thanks

Top Job, Sir 👌

I don't know where to start. I have been a fabricator machinist, tinkerer since a child. Now 64 employed in a job I enjoy going to because of my ability to repair, replace, modify parts and mechanisms to bring the companies vital equipment back to life again. At 16 started an apprenticeship in England. Five years later released on the world as a millwright. This is the point from which I view this man work. Almost made me shed a tear. All that I learned, all that I have to fight against, in comments of "Oh there he goes can't have sharp edge" "you don't have to do all that". This incredibly skilled man. Using mostly tools available to all home hobbyists. Vindicated that which gives me, my identity. Skill, experience, care, no short cuts File it smooth, break that edge, a hole isn't round until it's been chamfered. Used to be the norm. Trying to pass anything on is a near impossible task. Here I saw a man who picked a machine he's been thinking of for a while. Saw mechanisms around him, hmmm! That would work for ?. Prepared and set to work producing a thing of both form and function. Paint an option. Sometimes leaving it exposed. Gives it that oily rag clean. That has its own pleasing finish. Damn! I wish that cursing was allowed . This punctuation make comments more real. Thankyou I'm so f*&cking moved. By your abilities, and commitment to give appearance and ease of function to your work. It can still be kept alive.

@AndrossUT

2 ай бұрын

Bro he sized up dimensional holes with a hand drill.

@user-zw3qq5bg7y

2 ай бұрын

@@AndrossUT Yep! There's that practiced skill. Doesn't just offer the drill to the punch mark. Checks the drill for perpendicular the pushes through.

@AndrossUT

2 ай бұрын

@@user-zw3qq5bg7y it's fake

@AndrossUT

2 ай бұрын

@@user-zw3qq5bg7y you lose perpendicular when you resize holes with a drill like that. You also lose dimensional circulatory. Why are you trolling?

@user-zw3qq5bg7y

2 ай бұрын

@@AndrossUT Hey there. I read and gave thought to your reply. When drilling and tapping hole the tolerances when understood. It becomes clear that maximum thread / effort in cutting is at 75% thread formation. The closer to 100% thread form you want to achieve the effort required and risk of tap breakage increases that it becomes irrational to attempt this for a minimal ( off hand 10% increase holding). Therefore if drilling with a 5/16" Size drill for a 3/8" 16 thread thread is a leaning to slightly larger hole within the 75% aim. If using the power drill . Perpendicular eyeballing of the hole to be formed through what appears to be 3/8". My conservative estimate of drill length about 4 in. This says 3

Well Done!