Great job, great skills, great editing, no talking 👌

One of the reasons i like this channel is the editing. Pretty quick presentation with the highlights only. I appreciate that the editing can take a long time too.

@TheMetalist

Ай бұрын

Thank you 😊 Yes I always edit the videos so that I would like to watch them myself

Beautiful in it's simplicity. Very well thought out, as usual!

Dirk, you are definitely a pro, very nicely done my friend!!! God Bless 🙌 🙏 Jay.

Einfach genial die Umsetzung 🤗 Immer wieder erstaunlich was du alles aus ein paar Rohren, Winkeln und Flachmaterial machst 🙌 Auch dieses mal wieder "on-point" den Film für den Abend serviert mit handwerklichem Können, sauguter Kameraarbeit und Schweissporno 👀 Bin jetzt schon gespannt, was als nächstes kommt 👍

@TheMetalist

Ай бұрын

Vielen Danke für das Lob! Grüße 👋

Next episod of the best yt show on the world. Buckling up and watching.

Beautiful man. I have one I bought that has no fingers. You've convinced me to modify the top die for bending boxes.

Yet another fantastic project! Thanks for sharing.

Another nice build Dirk, I am about half way through a similar build but with the addition of a bearing & broaching press. The trick is getting them all to play nicely together without loosing any accuracy or consistency. A couple of parts from your build are better designed than mine so they will find their was onto my build, thank you kindly.

Sehr schönes Projekt!

@TheMetalist

Ай бұрын

Vielen Dank Manni 😁

Awesome work from beginning to end. Great work brother.

compact , convenient , apparently very strong ( 1/4" plate ) ? and manually operated - what's not to like knocked it out of the park again , my friend "great work" thanks for sharing

dope af, gona try it

Super cool project as always

Nicely done

Very nice project, nicely done. Thank you.

@TheMetalist

Ай бұрын

Thanks you 😊

Unbelievable magnificant and the most beautiful template, given free to all of us, to do it ourselves. Just masterly😃💯💥💪

@fuzzfacelogic789

Күн бұрын

Not free, but I do understand why not.

Genial, bin gespannt was als Nächstes kommt 😍

@TheMetalist

Ай бұрын

Vielen Dank 😊 Ja das wirst du wohl als erstes mitbekommen 😉

@FlorianBeck_762

Ай бұрын

@@TheMetalist ich befürchte es 🤣🤣🤣

What alloy was the aluminum? 4T bullnose/die radius for 5356 and at least 2T for 5052? Otherwise the aluminum will stress crack along the outside of the bends. Also, in general, if the inner shoulders of the lower die aren't radiused or lined with paper or plastic sheets (?) there is a 'tear zone' initiated by the scoring of the die's shoulders in the 50 series sheet and plate. Sure seen lots of tanks and other marine fabrications done with knife edge upper dies that ended up ruining perfectly good aluminum sheet that doesn't act the same as steel in a press brake.

@onionhead5780

Ай бұрын

Ya, when I was in high school screwing around in the metals shop the aluminum sheet would crack when you bent it exactly as you described.

That's a really nice build. Cheers SteveO

@TheMetalist

Ай бұрын

Thank you 😊

Excelente trabajo

Good job! Without lathe and milling machine!

Einfach wieder herrlich 😁 Video und Ergebnisse 🤩

@TheMetalist

Ай бұрын

Vielen Dank 👋

👍🙌👏SUPER!!! Отличная оснастка к прессу! Поскольку у меня есть 30т пресс надо будет сделать на досуге. Вещь полезная.

@TheMetalist

Ай бұрын

Thank you 😊

Always on top👍😉

@TheMetalist

Ай бұрын

Thank you 😊

I'm hoping you do a vertical tube bender soon be so good to finish out my own little shop after making this

richtig geil, jetzt nur noch elektrische Hydraulik pumpe und Fußpedal perfekt!

@TheMetalist

Ай бұрын

Vielen Dank 😊 Ja stimmt....vl kommt das noch 🤔 Grüße

vom youtuber zum TV-Star :-), schöner Bericht über deine berufliche Tätigkeit.

@TheMetalist

Ай бұрын

Vielen Dank 😊 kann/darf leider nicht privat davon teilen, ist schon sehr interessant 😁

Nice! Good channel! Liked and subscribed.

Waouuuu !!! Very good job 👍❤

Nice work . :)

Ein Rohrbiege Bausatz und was um Rohre auf Gärung zu Bohren wäre echt Bombe 😅

@TheMetalist

Ай бұрын

Ja könnte ich mal bauen 😅 wüsste auch sofort wie 😅

Simple. Yeah, that's... that's exactly what I was thinking

Ich Feier dich für die Tools 👌💪

@TheMetalist

Ай бұрын

Vielen Dank 😊

Работа с металлом мне всегда нравилась 😊 Удачи вам 😊. Я ✍️ ся ,вы???

This took me WAAAY more than 16 minutes!!! Whats up with that? I feel tricked. 😂

Now i can be metal bender too...

At 14:01, it says r = 20. To me, though, it looks like the diameter is 20, not the radius.

Very nice project, i like that is quite compact. I guess that aditional weld on edge is for strength, isn't it? What fill material was used?

@TheMetalist

Ай бұрын

Yes its a hard coating. I have to take a look on the box

I really like your videos, this one is very well done. Why did you weld off the edge of the blade, what is the significance of that?

@rijkbroertjes890

Ай бұрын

I guess to harden the steel

@TheMetalist

Ай бұрын

Thank you 😊 yes its a hart coating

Did you use a special rod to weld on the edge or just regular steel filler rod?

@TheMetalist

Ай бұрын

Yes its a special hard coating

Why weld the edge of the press dies at the beginning? Hardening hack?

What quind of grinding disc du you use? It looks pretty efficient thanks

Was hast du für einen adapter am akkuschrauber zum gewindeschneiden?

Браво. 🤝👍👌

@TheMetalist

Ай бұрын

Thank you 😊

That was Mental ! . . . er I mean Metal ;-))

Yes the editing is great, but,, a commentary can go along way to helping if someone wants to reproduce this project. Do you sell plans?

hello: from minute 14:00 I see a bar with a diameter of 20 millimeters. The radius will therefore be 10 millimeters, not 20. Or am I wrong?

@TheMetalist

Ай бұрын

😂😂😂 you are 100% right, i missed that

Is there any update to the black hammer? I am waiting quite a while now. Thank you

@TheMetalist

Ай бұрын

Hi Florian, The black ones have problems with the coating at the moment. But they should be available soon. You could also have one with a different coating

@FlorianH0867

Ай бұрын

@@TheMetalist, No, I love black so I will wait. Thank you for the update.

@TheMetalist

Ай бұрын

@@FlorianH0867 thank you for your patience😊

Are your TIG machines setup with all hand controls or do you have foot controls also?

@TheMetalist

Ай бұрын

I have bought but in this video it is just hand control

Wow was für eine Megageile Arbeit ,sieht aus wie bei unserer großen NC Kantbank im Betrieb .Wo hast Du den die kurzen Einsätze gekauft ,die sehen wirklich original wie unsere im Betrieb aus mit der Laserbeschriftung 👍😉 Grüße Marko

@TheMetalist

Ай бұрын

Vielen Dank, welche kurzen Einsätze meinst du. Grüße

@markoheimburger9895

Ай бұрын

@@TheMetalist Alles ok KZread ist an der Stelle hängengeblieben wo die Leiste gesägt und gelasert wurde 😉👍Habe es nochmal angeschaut alles Top selbst gemacht 😁

aber sind das 90° ?

👍

I really like the part where the video almost entirely shows him building one thing. Then he demonstrates a COMPLETELY DIFFERENT and press designed ENTIRELY DIFFERENT. And even goes so far as to assemble the original build at the end and does even bother to a piece of 24g sheet metal with it. You people are all VERY easily impressed.

Is this aluminum or steel? I notice alot of American videos are aluminum. Do you have steel videos as well or is it just aluminum. Kindly clarify on what material you are using...

@dunc71

Ай бұрын

The sparks give it away

Pure masterpiece video and one of the cleanest metal work on YT, the thread taping seems to be butter 🤩. This very straightforward assemblying of those manifold parts makes me suspect an insane eyeball precision ☺️. Just 2 question , what’s the tonnage of the jack ? Why the thread taping seems to be so smooth and easy, is it a Downcut bit ? Thanks !! 🙏🏼🙏🏾

affengeil 😏

@TheMetalist

Ай бұрын

Danke schön 😁 👋

😎👏👏👏👏👏👏👍

+

As a tool maker, you got the concept, your execution needs work. Learn metallurgy and heat treatment