Brilliant! Appreciate you saving us viewers time with your editing, very well done.

Nice design, clean and precise work, best editing and thank you for let us listing to the work work shop not some other kind of noise. Good work

Your metalworking and your visual storytelling are both absolutely wonderful!

@TheMetalist

2 жыл бұрын

Thank you 😁

Another fine addition to the table accessories 👍🏼👍🏼

I love that hammer man :D

@TheMetalist

2 жыл бұрын

Thank you 😁

Excellent work as always! Having it mount to your bench like that for adjustable roller spacing is brilliant!

@TheMetalist

2 жыл бұрын

Thank you 😁

Love the naration and the dementions were so very clear. I'm gonna' build one right now.

My two favorite companies Rehm and Fein. Regards Luke

@TheMetalist

2 жыл бұрын

👍💪

Pancene andalan sampean kangmas... ora rugi kawit mbiyen sabskrep cenel iki. Maturnuwun yo.

I love that on your edits, the cuts are always between the tap directions. Satisfying!

@TheMetalist

2 жыл бұрын

Thank you 😊

I didn`t know about this wicked smart guy, now i`m glad i`ve found him. Subscribed!

@TheMetalist

2 жыл бұрын

Thank you 😁 💪

Wenn ich mir Deine Arbeiten ansehe, finde ich immer 1%, welches ich zu Deinen 100% Prozent addieren kann. Perfekte Arbeit 101%!!!

@TheMetalist

2 жыл бұрын

Dankeschön sowas freut mich immer

That is another awesome build and excellent video editing, thank you for taking time to film and post this video!

@TheMetalist

2 жыл бұрын

Thank you 😁 you are welcome 💪

Love watching your work

Your metalwork videos are the best on KZread, straight to the point, and the best thing of all no bullshit talking that you have to fast forward through🤙 plus your metalwork is awesome. I'm subscribing👍

Very good model. Ingenious. Great job.

Excellent work. This is a professional work from a professional, thank you

that mountng table is genius

This is so perfectly entertaining, to the point, and mesmerizing

@TheMetalist

2 жыл бұрын

Thank you 😁

I like your creativity, inspirational.

Nice roller bender. We shared this video on our homemade tools forum this week :)

Off the hook , very talented

Pretty cool 😎 would love a welding table like that as you’ve shown you can mount pretty much anything to it 👍

@TheMetalist

2 жыл бұрын

Thank you 😁

Love the design 👍🏻

...... another mind-blown solution. 👍👍😎👍👍

@TheMetalist

2 жыл бұрын

Thank you 😁

Awesome design and great functionality..👍🏽🇺🇸👍🏽

Love your bandsaw table,good idea

@TheMetalist

2 жыл бұрын

Thank you 😁

Another amazing build!! Awesome job!

@TheMetalist

2 жыл бұрын

Thank you 😁

Thanks for another epic build video. so many cool tricks. luv ya home made Linisher 💯

Einfach nur hammer hammer geil, vielen Dank Dirk fürs Zeigen, bin hin und weg :-)

Nice green. And your table system is fookin genius.

@TheMetalist

Жыл бұрын

Thank you 💪😊

Fantastic. Like your work.

Great design and very well executed. I will be your next customer :) Thanks for the link.

@TheMetalist

2 жыл бұрын

😁💪

Hi Dirk, Respekt!!! Hammer Teil! Viele Grüße aus Ostfriesland 🤩

@TheMetalist

Жыл бұрын

Hi Jörg, vielen Dank. Grüße zurück 😁

I liked when you bolted the rollers to the table. It got me thinking that by bolting them closer, you could make smaller circles with the same equipment.

Very cool idea. Thanks.

Great build!

Nice design and execution

@TheMetalist

2 жыл бұрын

Thank you 😁

You're good! You create some cool stuff. You have the mind of a metalist!

@TheMetalist

2 жыл бұрын

😅 Thank you 😁

Parabéns pela calandra, muito bem feita!

Impressive as always

Nice rollbender roller.

Awesome build! Of course, it was your hammer that took the show. I’m dubbing it “The Iron Fist of Fabrication”. 😆

@TheMetalist

2 жыл бұрын

Thank you 😁😅🤜

Vc é fera, suas ferramentas são top demais.

Loving your work cowboy.

Great skills as always, Getting colourful to. All the best D

@TheMetalist

2 жыл бұрын

Thank you 😁

Your brain and handy work are admirable. (Is / are? "is" sounds better, but I know "are" is correct. Either way, wow.)

Wow this is good 👍 👏 experience.

@TheMetalist

2 жыл бұрын

Thank you 😊

It's a great idea. Thank you

Thats a badass tool to make my guy. Good shit

Exactly what I was looking for, many thanks 😎👍

@TheMetalist

2 жыл бұрын

You are welcome 😁

man, the stuff you could build with a lathe!

14:47 that was actually incredibly smart

Wohooo, endlich ein neues Video vom einzigartigen GermanMetalGuru.. Jedes mal eine visuelle, handwerklich meisterhafte und inspirierende Wohltat. Danke dafür, Dirk! - Äh.. Eine Drehbank! Er hat eine Drehbank! ENDLICH!!! Hat irgendwie gefehlt bisher. Bin restlos beghostert.. - Weiter so! Freue mich schon auf deinen nächsten Streich.. Beste Grüße!

@TheMetalist

2 жыл бұрын

Dankeschön 😁 bei der Ansage werde ich noch ganz rot 😅 die Drehbank seht eigentlich ein paar Meter weiter bei meinem Nachbar...will aber demnächst ne eigene 😁💪

That’s a hell of an idea. Great video. Keep up the good work

@TheMetalist

2 жыл бұрын

Thank you 😁

Very nice. Nice hammer. Thank you for the video and your time

@TheMetalist

2 жыл бұрын

You are welcome 💪😁

brilliant stuff

love the geometry of every item in this vid bro !

@TheMetalist

2 жыл бұрын

Thank you 😁

worth watching just to see the iron fist !

I made a ring roller free standing and I like yours and I suggest you make you two rollers into one but adjust your rollers closer or wider and you really don’t need pillow block bearings for 2 rollers just your idle bearings. Just a thought!

Really nice design! Maybe ad some kind off measuring device ( a ruler or cheap caliper). To get repeatable bends. I own a bender without one and it's hard to get the same bends every time.

Cool build

@TheMetalist

2 жыл бұрын

Thank you 😁

Eine genoß dies anschauen zu dürfen. Dies ist richtige Profi-Arbeit. Es sieht einfach aus und werde auch mal einen Versuch machen.. Ob mir das auch so gelingt?? Ich benötige solch einen Bender und neu kaufen ist zu einfach. Es selbst versuchen ist eine Herausforderung. Vielen Dank für dieses schönes lehrsames Video. Gruß aus Holland, Marcel Knippers.

@TheMetalist

2 жыл бұрын

Gerne 😁👍 Grüße zurück nach Holland

SUPERB I LOVE IT.

very cool build!

@TheMetalist

2 жыл бұрын

Thank you 😁

I am always like "how does any of this even make sense?" And at the end im always in awe.

@TheMetalist

2 жыл бұрын

Thank you for some nice words 😁

@irvingcobian

2 жыл бұрын

I'm the same exact way haha I love it!

Pretty cool

That table is bad ass

Amazing project and great vid buddy ❤

@TheMetalist

2 жыл бұрын

Thank you 😁

that hammer is freakin awesome!!!

Excellent video bro and excellent job on the project.

@TheMetalist

2 жыл бұрын

Thank you 😁

That’s awesome really amazing 👍

@TheMetalist

2 жыл бұрын

Thank you 😁

Brilliant !

Good idea! Enjoying watching here! Full support here!

@TheMetalist

2 жыл бұрын

Thank you 😁

@the metalist Love your design. I've been subscribed for awhile and your work is great. Request. could you attach an estimate on the materials used not including tools obviously, but bearings, all thread, etc.? Also, what taps are you using?

Ótima ideia parabéns🇧🇷

YAY MIG WELD

You have a lot of cool ideas I like your channel, you do good work.

@TheMetalist

2 жыл бұрын

Thank you 😁

Fantastic man, I would like to do something like that myself, but I have nothing to do with it

Bardzo dobra robota :) 👌

Very nice!

Excellent as always. You just need to line it up with a window for longer lengths! For someone so clever you seem to have a lot of time on your hands to make these things.

@TheMetalist

2 жыл бұрын

Thank you 😁 Yes i try to do one good Video in a month 😅

@grumpyone5963

2 жыл бұрын

@@TheMetalist Well you certainly do do a good job of making the video as well as the piece you’re making. I had seen the thumbnail for a couple of days and passed it by until I saw it was from you The Metalist. Always worth watching this I thought.👍

@TheMetalist

2 жыл бұрын

😁😁😁 thank again

Super!!!!!!!!!!! Очень интересно и познавательно. Спасибо за хорошие видео.

Good ideal nice invention thank for sharing, many time see your video.

Good stuff! You could use it as a press when mounted vertically and removed the wheels.

@TheMetalist

2 жыл бұрын

Nice idea 😁

good job, big up to you

you little bastard genius, love it

Amazing video.. it would be nice if 4 rolls were made to minimize wasted material

Thank you ☺

Muy elaborado , pero realmente excelente !!!! pregunto , que medidas tiene tu mesa , cada cuanto estan los agujeros y de que grosor es la chapa ? Gracias , saludos desde Santa fe cap. , Argentina.

When i seen your video about your "Dream Welding Table" - I watched it. And thought "Dream table? PFFFFFFTTTTTT". I didnt see the versatility in it until i watch another video several weeks later. Of you building your tooling to fit in the threaded hole of the table. I LOVE this design! I do have one question. How do keep from dinging your threads in the table? I mean when inserting the bench clamps?

Love it excellent job What kind of band saw is that ?????

Genius!

Loved the video. Very cool. Just a bit sad that the paint came off so quickly on the outer rollers. But hey, what would you expect

@TheMetalist

2 жыл бұрын

Thank you 😁

Sehr schönes Ding, so langsam mußt du nicht nur Pläne, sondern auch fertige Produkte verkaufen, ich komme ja kaum noch nach :)

@TheMetalist

2 жыл бұрын

Dankeschön 💪😅 ich schau mal ob ich es einrichten kann 😅

Hi, really enjoy your vids. I purchased a foldable welding table plans from you. And you drill and tap the holes. Wont the drop down fixture clamps damage the threads on the welding table?

good idea

nice one

Awesome 😍😍😍

That’s cool bro