Here is a short tutorial on how you can reprogram your keyless entry receiver to your key fob. Very easy and can save you $100 not going to the dealership.
Жүктеу.....
Пікірлер: 204
@estradaaudrey9 жыл бұрын
Thank you!! The dealer wanted $100 to reprogam it and said it would take over an hour to do. I saw your video and took under 10 min. Thank you again!!
@domallen1451
6 жыл бұрын
Audrey Estrada $100 just to do that?! I wouldnt want to know what they charge for a service
@viddaxthesloth22533 жыл бұрын
I searched on Google and found all these steps except for locking and unlocking from the door after opening it the first time. Thank you.
@benberry68756 жыл бұрын
Just so you know, this video is still helping people all these years later. Thank you so much!
@JuanMorales-wg8qq7 жыл бұрын
Hello Ryan, today is 8/25/2016 I just want to tell you that I did exactly what you did in your video on my 2007 Mazda 6, and it worked thank you so much for that information.
@UndrgrndTy6 жыл бұрын
Thank you so much Ryan! I went to the Mazda dealer today and they were trying to make me do a diagnostics for $112 just for the keyfob. You saved me money that a student like me didn’t have. Anyone reading this, it works (I had to try twice).
@denniswhite38369 жыл бұрын
Hey this totally worked for me on 2 keypads that became disabled the same day. Took me about 5 minutes to reprogram both. Ryan, you saved me about $140 CDN dollars. Thank you so much.
@jaidynsmom201010 жыл бұрын
Thank you so much! You made a task that seemed difficult so easy! Saved me the trouble of paying over $100 to get my remote programmed elsewhere.
@daltonrich7658 Жыл бұрын
Honestly wasn't sure if this was gonna work on my 2006 Mazda 6. I got a remote from Amazon and when I used your tutorial it worked on the first try! Thank you so much!
@naa3672
Жыл бұрын
Same! Tried it today and it worked
@daltonrich7658
Жыл бұрын
@@naa3672 1. Pair the remote? Check 2. Cut the key? Check. 3. Does my car start? No bc I still need a dealer to pair it with my car 😭 I've had this new key over a month now and I can't even use it to start my car :(
@naa3672
Жыл бұрын
@@daltonrich7658 why are you trying to start it with the fob? It's only for performing the button functions like locking/unlocking, opening your trunk and setting the alarm off. Remote starts are completely different
@daltonrich7658
Жыл бұрын
@@naa3672 I never said it was a remote start. The buttons on the remote will work when the *remote* is paired to the car, but the key will not start the car because it does not emit some sort of electronic signal like the original key does. It fits in the ignition and even turns it to the START position (past ACC), but does not start my car.
@anandhusivan9787
Жыл бұрын
Hai mate their is is small chip inside your previous key in the corner side its like a small black rectangle piece you need to take that chip and put it in your new key im the exact slot other wise car not start
@Aliew889 жыл бұрын
Thank you! Did it and it worked! It took me a few tries until I realized you kept the door open after opening and closing the door 3 xs. Much appreciated!
@YourHobbyConnection10 жыл бұрын
It really worked!!! I used it on my 2007 Mazda6!! You literally saved me over a 100 bucks!! I mean they want to charge 100 reprogram it, they said "It takes about an hour to reprogram the remote to the car." Well thanks to you I know that what they said is total BS!! Thanks!!
@bradleyray10499 жыл бұрын
This is the business! It worked a charm. I'm now back in the 21st century. Thank you!
@jasonwang86187 жыл бұрын
That was awesome!!! Worked like a charm. I thought i was going have to do it old school and open/clse manually forever. THANKS!!!
@teenaguad38309 ай бұрын
I’m so freaking excited! It worked! Your instructions were top notch! Thank you so much for posting this video 😊
@ChampionBaki8 жыл бұрын
This was perfect. Mine quit working and I changed the battery which didn't fix the issue. I tried this and it is working perfectly now. Thank you for this video.
@asilver19829 жыл бұрын
It works. If you have 2 keys you need to press unlock on both instead of any key during that step.
@mikejonce15 жыл бұрын
Worked like a charm for my 2006 Mazda 6; THANK YOU!!!
@wch1zp1nk6 жыл бұрын
Thanks mate, worked perfectly fine. I had do it twice since I closed the door before pushing twice on any buttons. I only need to call the dealership and see how much they charge around here! Cheerz!
@replacemyremote65729 жыл бұрын
Nice answers in return of this query with real arguments and explaining all about that.
@Armaaan19849 жыл бұрын
Thanks a lot, worked perfectly on my 2003. You saved me $100 bucks
@jk-zf8eo4 жыл бұрын
Worked brilliant on my 2007 Mazda 6,thanks so much!
@SoloTheMadlad3 жыл бұрын
8 years later and you halped me fix my first cars kay. Thank you so much.
@keepmymindpreoccupied28927 жыл бұрын
it worked!!! thanks bro!! saved me my arm and my leg.
@jonathanalexand10 жыл бұрын
Thank you! Worked perfectly on a 2003 Mazda 6
@ryanspallinger824710 жыл бұрын
My FOB just quit working on day so I replaced the battery but it still didn't work, I thought I was going to have to go to the dealer until I did this and it worked. THANKS!!!
@Guez_art10 жыл бұрын
IT WORKED on my moms 06 Mazda6!!!!!!! thanks!
@ahmadshakaib13116 жыл бұрын
Yo, the dealer wanted $120 to do this. It took me 2 minutes lol. Thank you!
@elimaslonka1751 Жыл бұрын
Dude you saved me so much money thank you it worked so easy
@klwj19814 жыл бұрын
It worked 😯 I'll change that my battery, I've been unlocking with the key,, even when I first bought the car it didn't work but the Mazda dealership replace the battery and sent the key back to me and it still didn't work. I randomly look up how to program the key in by accident and tried it and it work. I follow the along as you were talking and it worked.
@crshovveride10 жыл бұрын
Thanks man worked like a charm on my 06 Mazda 6
@4dscreenart8 жыл бұрын
Great video.... Bought this kind of car for my son but the remote key was all busted up. When I called the dealership and by the time they were done screwing me it would've been over $300.00 I read you could buy online and program but instructions weren't so clear so thank you for clearing it up for me.
@LouInAL10 жыл бұрын
After going through the needlessly painful process of replacing the battery in my daughter's Mazda 6i remote, it would not work even though the light on the fob lit up when a button was pressed confirming proper installation of the battery. I followed your instructions and it works perfectly now. Thank you!
@samyz1660
3 жыл бұрын
I know it was six years ago but I'm having the same problem how did you put the battery ?
@mariuszr55168 жыл бұрын
thank you very much helped tremendously and saved me a hundred bucks.
@cjacobs26945 жыл бұрын
Huge help! Replaced my batteries, the remote still wouldn't work and couldn't find any info in the manual. This worked like a charm.
@tamukamakotore27867 жыл бұрын
Many thanks. The steps worked on our Mazda 2 2008 model.
@lisztrivera8 жыл бұрын
thanks!!! it worked great on 03 Mazda 6.
@JyLMGroup6 жыл бұрын
Thank you!, saved me $100!
@nadeemkochan8 жыл бұрын
thanks man it really made my day
@andrewalvarez33295 жыл бұрын
Worked like a charm thanks
@ryanstmarie9 жыл бұрын
Got my new key fob paired to 2005 Mazda 6. Didn't work first time but noticed you keep the door open after open and closing 3 times then click remote unlock 2 times. Thanks for the video!
@paulwall816
5 жыл бұрын
Well you got lucky it's not programming to my 05 Mazda 6
@bscoyt15263 жыл бұрын
I tried it and is so amazing and easy I want to thank u for the video dude❤️. But u have to make sure that u put the battery correctly first
@Nabudelimirzz9 ай бұрын
Thanks alot.. it’s working ❤
@memecute2210 жыл бұрын
Omg this really works ..my own keyman couldn't program my key he told me to go to the dealer ship smh.. By the way I have a 2010 madaz 6 so yes this does work for that year too 😘😘😄
@rosalyncudal9674 жыл бұрын
Thank you so much. It work on Mazda 6 2007. Save us a lot of money.
@bandaralhazemi77519 жыл бұрын
thank's a lot. it worked perfectly
@Scall768 жыл бұрын
Worked perfect for a 2007 Mazda 6 sportwagon,
@ryruu1310 жыл бұрын
Glad it's working for you guys.
@marymata681
6 жыл бұрын
Ryan Ruud hello will this work with a old key?
@pyrodevil10 жыл бұрын
Just tried it on my 06 mazda 6. Works!!!
@albertoherrera48647 жыл бұрын
worked great. thank you.
@renee7staci110 жыл бұрын
Awesome!!! Thx u so much!! IT WORKED IT!!! YAY!!
@brandonplante55703 жыл бұрын
This sounds like hokum but it actually works. FYI it works for 2007 as well. Thanks a ton for posting this.
@Gaelou458 жыл бұрын
Merci mec ! Tu m'as éviter une facture de 92€ chez mon garagiste =) Merci merci merci
@michaelaguilar54324 жыл бұрын
Awesome! Thanks for taking the time!
@vt7828
4 жыл бұрын
Does this just program the "unlock/lock" feature or does it program the key to start the ignition as well? I want to get a spare key for my mazda 6 2006 but not sure if i should get the key with the lock fob or just the entry fob...
@oldschoollegend11 жыл бұрын
Just used this for my 2010 mazda3. Thank you. Now to go see if Iot works after I cut it.
@luklukowski7858 жыл бұрын
very very thanks for help with my mazda 6
@akakiberidze1601
8 жыл бұрын
how unlock back doors ? only back two doors do not work .. passenger can not open back doors
@maverick2601ify7 жыл бұрын
this also works for a 2007 Mazda 6 key fob. than k you!
@boonjabby4 жыл бұрын
I'll be honest. I thought this was taking the mickey out of me. I did it. Worked perfectly haha 😂 If you don't have the lock button on your door just flick the driver's door switch as instructed.
@jerrygarcia60813 жыл бұрын
Much appreciate , thank you .
@14Steve672 жыл бұрын
Worked first time on UK '08 Mazda 6 model.
@aliarikat24194 жыл бұрын
Tf it actually works😂😂 thanks
@davewilson278811 ай бұрын
Yess thankyou so much
@aznstylz8 жыл бұрын
I was wondering i dont know if my remote makes the beep sounds do you know the options to change that so i can hear when it locks unlocks etc?
@GiggLzGaming5 жыл бұрын
Worked on my 2011 mazda 6
@f.l.g.55636 жыл бұрын
buen video amigo
@ploverxiong27248 ай бұрын
Thanks you very much
@37bijulal7 жыл бұрын
excellent ,thank you
@voygerr193 жыл бұрын
Mine isazda6 201, It worked, please carefully follow the steps properly, for me second attempt worked
@TheCallouscal4 жыл бұрын
I see you have the MPS/Mazdaspeed 6... or at least the bonnet looks like it. How many hz chip did you use?
@agentjucey11 жыл бұрын
works on my 04. try it .
@vinylworld49496 жыл бұрын
Funciona perfecto en el mazda 3! Gracias 👍
@angelherrera8810
6 жыл бұрын
Disculpa me perdí después de cerrar tres veces la puerta . Luego qué haces ?
@markpickering27113 жыл бұрын
Is there a certain frequency that a Mazda fob should transmit at ? I have my old Mercedes fobs or my old Saab fob, but cannot seem to program them.... Thanks, Mark
@UTPP5 жыл бұрын
Very helpful mate and thank you. Do you know how to program the transponder? My car won't start using the new key. Thanks for any advice.
@przemekmensik3319
5 жыл бұрын
Hi! I think this should help ;) kzread.info/dash/bejne/a4xoqaSdqbzad8o.html
@JaYGoasT5 жыл бұрын
this works on 2008 models. just confirmed. i didn't fix my problem but it does work
@Mr.NotYourPALGuy3 жыл бұрын
Should this work on an 08 Mazda 6? Also does the new key need to be cut specifically to the old key?
@Michael-be8tb8 жыл бұрын
Does this work for different key fob models as well?
@MrWenkys5 жыл бұрын
Thank you so much
@BluEydEscArtist8 жыл бұрын
yesss. thanks!
@keepmymindpreoccupied28927 жыл бұрын
if i got a hold of an 06 mazda 6 fob do you think it could be programmed to an 07 mazda 6?
@20114evr2 жыл бұрын
thanks buddy
@okiedoke0728 жыл бұрын
Can you program an alarm to the car by using the alarm button on the remote?
@svenkeller498 жыл бұрын
Does it work for 2007 Mazda 5 grand touring? thank you
@vickisabella1304 жыл бұрын
Hello I'm just wanted to know if it will work in a 2007 Mazda CX-9 because for some reason my car work keyless and it have one of those key fob that have a card so apparently like I have have it in my back pocket and sit and it kind of Bend so now when I go to the car it does not recognize I have to keep using master key and it's a pain in the butt please let me know thanks
@bradmatuzak23545 жыл бұрын
I have a 3008 Mazda 6 and tried this and still does not work. I replaced the battery before so the battery to the fob is brand new. The locks cycle through but fob does not work but the light on the fob still lights up. Not sure what an additional troubleshooting step might be. Thanks!
@cheyennechun39195 жыл бұрын
Would this work on 2007 Mazda RX8?
@daadirytdc27268 жыл бұрын
thanks for your video, what about Mazda 2, 2005 how do I program it please thanks
@Michael-be8tb8 жыл бұрын
Where did you buy your key fob at?
@GiggLzGaming5 жыл бұрын
Thank u!!
@demiladebalogun53899 жыл бұрын
where can i get the same key you have i have a mazda 6 2005 and i have just the key
@sallytottinchi93211 жыл бұрын
where did you get this key fob from?
@asiaa16975 жыл бұрын
My system alarm goes off randomly sometimes will this help reprogram it because my key light indicator keeps flashing in my car as well.
@witherspoon811869 жыл бұрын
I called Mazda the other day and asked them how to program the fob because the video wasn't working the locks would lock but the key fob would not program and they told me I had to have two key fobs for it to work so do you have two key fobs ???
@lbutters337 жыл бұрын
Does this work for a 2005 rx-8? or any r-8 in general I guess
@7x28981237 жыл бұрын
worked on my '08 Mazda 6, thank you!
@kbabysmith64828 жыл бұрын
do by any chance it will work for a 2007 Mazda 5
@stevephillips46315 жыл бұрын
Thanks 😊😊
@Unknownuser123563 жыл бұрын
Where did you get the key fob ?
@MyLifeInVideos3 жыл бұрын
will this work on 09 mazda 6
@judeeorig2 жыл бұрын
Hello, is this really worked in mazda 6 2006? Thanks
@lindseyshort889 жыл бұрын
Quick question, I did this and for some reason my car is still not responding. Is it possible that a fuse in my car could be blown?
@bertoo70311 жыл бұрын
I've gotten to the step where i press unlock twice on the key and it doesnt work. I've also tried the on/off 4x instead of 3x which makes the trunk pop open and the horn goes off twice and still no luck. I've tried on two keys that i had to replace batteries to, any advice? thanks
Пікірлер: 204
Thank you!! The dealer wanted $100 to reprogam it and said it would take over an hour to do. I saw your video and took under 10 min. Thank you again!!
@domallen1451
6 жыл бұрын
Audrey Estrada $100 just to do that?! I wouldnt want to know what they charge for a service
I searched on Google and found all these steps except for locking and unlocking from the door after opening it the first time. Thank you.
Just so you know, this video is still helping people all these years later. Thank you so much!
Hello Ryan, today is 8/25/2016 I just want to tell you that I did exactly what you did in your video on my 2007 Mazda 6, and it worked thank you so much for that information.
Thank you so much Ryan! I went to the Mazda dealer today and they were trying to make me do a diagnostics for $112 just for the keyfob. You saved me money that a student like me didn’t have. Anyone reading this, it works (I had to try twice).
Hey this totally worked for me on 2 keypads that became disabled the same day. Took me about 5 minutes to reprogram both. Ryan, you saved me about $140 CDN dollars. Thank you so much.
Thank you so much! You made a task that seemed difficult so easy! Saved me the trouble of paying over $100 to get my remote programmed elsewhere.
Honestly wasn't sure if this was gonna work on my 2006 Mazda 6. I got a remote from Amazon and when I used your tutorial it worked on the first try! Thank you so much!
@naa3672
Жыл бұрын
Same! Tried it today and it worked
@daltonrich7658
Жыл бұрын
@@naa3672 1. Pair the remote? Check 2. Cut the key? Check. 3. Does my car start? No bc I still need a dealer to pair it with my car 😭 I've had this new key over a month now and I can't even use it to start my car :(
@naa3672
Жыл бұрын
@@daltonrich7658 why are you trying to start it with the fob? It's only for performing the button functions like locking/unlocking, opening your trunk and setting the alarm off. Remote starts are completely different
@daltonrich7658
Жыл бұрын
@@naa3672 I never said it was a remote start. The buttons on the remote will work when the *remote* is paired to the car, but the key will not start the car because it does not emit some sort of electronic signal like the original key does. It fits in the ignition and even turns it to the START position (past ACC), but does not start my car.
@anandhusivan9787
Жыл бұрын
Hai mate their is is small chip inside your previous key in the corner side its like a small black rectangle piece you need to take that chip and put it in your new key im the exact slot other wise car not start
Thank you! Did it and it worked! It took me a few tries until I realized you kept the door open after opening and closing the door 3 xs. Much appreciated!
It really worked!!! I used it on my 2007 Mazda6!! You literally saved me over a 100 bucks!! I mean they want to charge 100 reprogram it, they said "It takes about an hour to reprogram the remote to the car." Well thanks to you I know that what they said is total BS!! Thanks!!
This is the business! It worked a charm. I'm now back in the 21st century. Thank you!
That was awesome!!! Worked like a charm. I thought i was going have to do it old school and open/clse manually forever. THANKS!!!
I’m so freaking excited! It worked! Your instructions were top notch! Thank you so much for posting this video 😊
This was perfect. Mine quit working and I changed the battery which didn't fix the issue. I tried this and it is working perfectly now. Thank you for this video.
It works. If you have 2 keys you need to press unlock on both instead of any key during that step.
Worked like a charm for my 2006 Mazda 6; THANK YOU!!!
Thanks mate, worked perfectly fine. I had do it twice since I closed the door before pushing twice on any buttons. I only need to call the dealership and see how much they charge around here! Cheerz!
Nice answers in return of this query with real arguments and explaining all about that.
Thanks a lot, worked perfectly on my 2003. You saved me $100 bucks
Worked brilliant on my 2007 Mazda 6,thanks so much!
8 years later and you halped me fix my first cars kay. Thank you so much.
it worked!!! thanks bro!! saved me my arm and my leg.
Thank you! Worked perfectly on a 2003 Mazda 6
My FOB just quit working on day so I replaced the battery but it still didn't work, I thought I was going to have to go to the dealer until I did this and it worked. THANKS!!!
IT WORKED on my moms 06 Mazda6!!!!!!! thanks!
Yo, the dealer wanted $120 to do this. It took me 2 minutes lol. Thank you!
Dude you saved me so much money thank you it worked so easy
It worked 😯 I'll change that my battery, I've been unlocking with the key,, even when I first bought the car it didn't work but the Mazda dealership replace the battery and sent the key back to me and it still didn't work. I randomly look up how to program the key in by accident and tried it and it work. I follow the along as you were talking and it worked.
Thanks man worked like a charm on my 06 Mazda 6
Great video.... Bought this kind of car for my son but the remote key was all busted up. When I called the dealership and by the time they were done screwing me it would've been over $300.00 I read you could buy online and program but instructions weren't so clear so thank you for clearing it up for me.
After going through the needlessly painful process of replacing the battery in my daughter's Mazda 6i remote, it would not work even though the light on the fob lit up when a button was pressed confirming proper installation of the battery. I followed your instructions and it works perfectly now. Thank you!
@samyz1660
3 жыл бұрын
I know it was six years ago but I'm having the same problem how did you put the battery ?
thank you very much helped tremendously and saved me a hundred bucks.
Huge help! Replaced my batteries, the remote still wouldn't work and couldn't find any info in the manual. This worked like a charm.
Many thanks. The steps worked on our Mazda 2 2008 model.
thanks!!! it worked great on 03 Mazda 6.
Thank you!, saved me $100!
thanks man it really made my day
Worked like a charm thanks
Got my new key fob paired to 2005 Mazda 6. Didn't work first time but noticed you keep the door open after open and closing 3 times then click remote unlock 2 times. Thanks for the video!
@paulwall816
5 жыл бұрын
Well you got lucky it's not programming to my 05 Mazda 6
I tried it and is so amazing and easy I want to thank u for the video dude❤️. But u have to make sure that u put the battery correctly first
Thanks alot.. it’s working ❤
Omg this really works ..my own keyman couldn't program my key he told me to go to the dealer ship smh.. By the way I have a 2010 madaz 6 so yes this does work for that year too 😘😘😄
Thank you so much. It work on Mazda 6 2007. Save us a lot of money.
thank's a lot. it worked perfectly
Worked perfect for a 2007 Mazda 6 sportwagon,
Glad it's working for you guys.
@marymata681
6 жыл бұрын
Ryan Ruud hello will this work with a old key?
Just tried it on my 06 mazda 6. Works!!!
worked great. thank you.
Awesome!!! Thx u so much!! IT WORKED IT!!! YAY!!
This sounds like hokum but it actually works. FYI it works for 2007 as well. Thanks a ton for posting this.
Merci mec ! Tu m'as éviter une facture de 92€ chez mon garagiste =) Merci merci merci
Awesome! Thanks for taking the time!
@vt7828
4 жыл бұрын
Does this just program the "unlock/lock" feature or does it program the key to start the ignition as well? I want to get a spare key for my mazda 6 2006 but not sure if i should get the key with the lock fob or just the entry fob...
Just used this for my 2010 mazda3. Thank you. Now to go see if Iot works after I cut it.
very very thanks for help with my mazda 6
@akakiberidze1601
8 жыл бұрын
how unlock back doors ? only back two doors do not work .. passenger can not open back doors
this also works for a 2007 Mazda 6 key fob. than k you!
I'll be honest. I thought this was taking the mickey out of me. I did it. Worked perfectly haha 😂 If you don't have the lock button on your door just flick the driver's door switch as instructed.
Much appreciate , thank you .
Worked first time on UK '08 Mazda 6 model.
Tf it actually works😂😂 thanks
Yess thankyou so much
I was wondering i dont know if my remote makes the beep sounds do you know the options to change that so i can hear when it locks unlocks etc?
Worked on my 2011 mazda 6
buen video amigo
Thanks you very much
excellent ,thank you
Mine isazda6 201, It worked, please carefully follow the steps properly, for me second attempt worked
I see you have the MPS/Mazdaspeed 6... or at least the bonnet looks like it. How many hz chip did you use?
works on my 04. try it .
Funciona perfecto en el mazda 3! Gracias 👍
@angelherrera8810
6 жыл бұрын
Disculpa me perdí después de cerrar tres veces la puerta . Luego qué haces ?
Is there a certain frequency that a Mazda fob should transmit at ? I have my old Mercedes fobs or my old Saab fob, but cannot seem to program them.... Thanks, Mark
Very helpful mate and thank you. Do you know how to program the transponder? My car won't start using the new key. Thanks for any advice.
@przemekmensik3319
5 жыл бұрын
Hi! I think this should help ;) kzread.info/dash/bejne/a4xoqaSdqbzad8o.html
this works on 2008 models. just confirmed. i didn't fix my problem but it does work
Should this work on an 08 Mazda 6? Also does the new key need to be cut specifically to the old key?
Does this work for different key fob models as well?
Thank you so much
yesss. thanks!
if i got a hold of an 06 mazda 6 fob do you think it could be programmed to an 07 mazda 6?
thanks buddy
Can you program an alarm to the car by using the alarm button on the remote?
Does it work for 2007 Mazda 5 grand touring? thank you
Hello I'm just wanted to know if it will work in a 2007 Mazda CX-9 because for some reason my car work keyless and it have one of those key fob that have a card so apparently like I have have it in my back pocket and sit and it kind of Bend so now when I go to the car it does not recognize I have to keep using master key and it's a pain in the butt please let me know thanks
I have a 3008 Mazda 6 and tried this and still does not work. I replaced the battery before so the battery to the fob is brand new. The locks cycle through but fob does not work but the light on the fob still lights up. Not sure what an additional troubleshooting step might be. Thanks!
Would this work on 2007 Mazda RX8?
thanks for your video, what about Mazda 2, 2005 how do I program it please thanks
Where did you buy your key fob at?
Thank u!!
where can i get the same key you have i have a mazda 6 2005 and i have just the key
where did you get this key fob from?
My system alarm goes off randomly sometimes will this help reprogram it because my key light indicator keeps flashing in my car as well.
I called Mazda the other day and asked them how to program the fob because the video wasn't working the locks would lock but the key fob would not program and they told me I had to have two key fobs for it to work so do you have two key fobs ???
Does this work for a 2005 rx-8? or any r-8 in general I guess
worked on my '08 Mazda 6, thank you!
do by any chance it will work for a 2007 Mazda 5
Thanks 😊😊
Where did you get the key fob ?
will this work on 09 mazda 6
Hello, is this really worked in mazda 6 2006? Thanks
Quick question, I did this and for some reason my car is still not responding. Is it possible that a fuse in my car could be blown?
I've gotten to the step where i press unlock twice on the key and it doesnt work. I've also tried the on/off 4x instead of 3x which makes the trunk pop open and the horn goes off twice and still no luck. I've tried on two keys that i had to replace batteries to, any advice? thanks
Where do I buy the fob? Amazon ?