This video is short and concise by getting to the point. 👍
@chuckzeman65704 ай бұрын
a barefoot mechanic just like me
@ploverxiong27248 ай бұрын
Thanks you very much
@lindafeldman43309 ай бұрын
Why does the alarm go off for 2 minutes after programming?
@teenaguad38309 ай бұрын
I’m so freaking excited! It worked! Your instructions were top notch! Thank you so much for posting this video 😊
@Nabudelimirzz10 ай бұрын
Thanks alot.. it’s working ❤
@davewilson2788 Жыл бұрын
Yess thankyou so much
@user-cg1lz1vf8y Жыл бұрын
What if the key I order isn’t turning the key on at all
@daltonrich7658 Жыл бұрын
Honestly wasn't sure if this was gonna work on my 2006 Mazda 6. I got a remote from Amazon and when I used your tutorial it worked on the first try! Thank you so much!
@naa3672 Жыл бұрын
Same! Tried it today and it worked
@daltonrich7658 Жыл бұрын
@@naa3672 1. Pair the remote? Check 2. Cut the key? Check. 3. Does my car start? No bc I still need a dealer to pair it with my car 😭 I've had this new key over a month now and I can't even use it to start my car :(
@naa3672 Жыл бұрын
@@daltonrich7658 why are you trying to start it with the fob? It's only for performing the button functions like locking/unlocking, opening your trunk and setting the alarm off. Remote starts are completely different
@daltonrich7658 Жыл бұрын
@@naa3672 I never said it was a remote start. The buttons on the remote will work when the *remote* is paired to the car, but the key will not start the car because it does not emit some sort of electronic signal like the original key does. It fits in the ignition and even turns it to the START position (past ACC), but does not start my car.
@anandhusivan9787 Жыл бұрын
Hai mate their is is small chip inside your previous key in the corner side its like a small black rectangle piece you need to take that chip and put it in your new key im the exact slot other wise car not start
@ajmartinez1514 Жыл бұрын
Dumb ass next time be more specific of what mbuttons to press
@erikglassiemailisi3852 Жыл бұрын
Didn't work
@elimaslonka1751 Жыл бұрын
Dude you saved me so much money thank you it worked so easy
@miscgloryofficial4527 Жыл бұрын
this is only for the car doors, this is NOT the immobilizer that allows the key to start the engine(Transponder Programming)... Apparently this(Transponder Programming) is ONLY able to be achieved if you have TWO original Factory Keys that came with car. Otherwise a Locksmiths scanning/reprogramming tool and services will be required. (Anyone with otherwise expert knowledge feel free to correct me but this is what Ive been able to ascertain).
@itsyaboi4807 Жыл бұрын
I did this and the locks go off automatically like they’re supposed and my key fob blinks red so it has power but it’s still not working for me, anyone know the problem?
@chrisx69952 жыл бұрын
Uselsss
@torbjrngeorgsen59852 жыл бұрын
When i double-press on the unlock button nothing happens. Anyone got an answer to why?
@judeeorig2 жыл бұрын
Hello, is this really worked in mazda 6 2006? Thanks
@pixydust12312 жыл бұрын
Car won't do anything when pushing the buttons 2 times any ideas
@20114evr2 жыл бұрын
thanks buddy
@14Steve672 жыл бұрын
Worked first time on UK '08 Mazda 6 model.
@shalvanadiradze72942 жыл бұрын
good
@Unknownuser123563 жыл бұрын
Where did you get the key fob ?
@Marshallbuttholeman3 жыл бұрын
I just bought an 06 speed6. I only got a key with it. When ever I try to lock the vehicle with the door open it automatically unlocks. I can’t lock the car using the key. There is a red key light on the dash.
@voygerr193 жыл бұрын
Mine isazda6 201, It worked, please carefully follow the steps properly, for me second attempt worked
@brandonplante55703 жыл бұрын
This sounds like hokum but it actually works. FYI it works for 2007 as well. Thanks a ton for posting this.
@bscoyt15263 жыл бұрын
I tried it and is so amazing and easy I want to thank u for the video dude❤️. But u have to make sure that u put the battery correctly first
@MyLifeInVideos3 жыл бұрын
will this work on 09 mazda 6
@markpickering27113 жыл бұрын
Is there a certain frequency that a Mazda fob should transmit at ? I have my old Mercedes fobs or my old Saab fob, but cannot seem to program them.... Thanks, Mark
@jerrygarcia60813 жыл бұрын
Much appreciate , thank you .
@bigbank73503 жыл бұрын
My mazda 6 i grand touring 09 won't let me turn the key cause it can't and I have to press the break once to let it get to the on position but once I turn it off with the button I have to press the break then I can use the button again. I just replaced my battery and my key isn't letting me push to start and this didn't fix it.
@Mr.NotYourPALGuy3 жыл бұрын
Should this work on an 08 Mazda 6? Also does the new key need to be cut specifically to the old key?
@viddaxthesloth22533 жыл бұрын
I searched on Google and found all these steps except for locking and unlocking from the door after opening it the first time. Thank you.
@SoloTheMadlad3 жыл бұрын
8 years later and you halped me fix my first cars kay. Thank you so much.
@nelyiezt78043 жыл бұрын
so it didn't work... it kept locking and unlocking over and over then it stopped.... buttons Don't do anything
@DittyDafku3 жыл бұрын
2012 mazda 6 here. The key worked for the doors but is not opening my trunk. Is that normal or maybe my car is fucking up lol
@brankitt3 жыл бұрын
Does the key turn on the ignition after doing this? One of my keys does not turn on the ignition, but it does lock and unlock the car. It is cut and fits, turns the car on, just won't turn the ignition on.
@bighomiedean75333 жыл бұрын
It ain’t work for me
@rosalyncudal9674 жыл бұрын
Thank you so much. It work on Mazda 6 2007. Save us a lot of money.
@MilimetrPL4 жыл бұрын
For what is the red button?
@j.c.t144 жыл бұрын
Anyone know where I can get an extra key? I’m being charged $400+ to get a replacement key 😒
@TheCallouscal4 жыл бұрын
I see you have the MPS/Mazdaspeed 6... or at least the bonnet looks like it. How many hz chip did you use?
@klwj19814 жыл бұрын
It worked 😯 I'll change that my battery, I've been unlocking with the key,, even when I first bought the car it didn't work but the Mazda dealership replace the battery and sent the key back to me and it still didn't work. I randomly look up how to program the key in by accident and tried it and it work. I follow the along as you were talking and it worked.
@MrDCdale4 жыл бұрын
Yes it works great to program fob but if you're not using the stock key then your car could possibly be put in the immobilization mode and you have to take it to the dealership should put this is your video
@aliarikat24194 жыл бұрын
Tf it actually works😂😂 thanks
@jk-zf8eo4 жыл бұрын
Worked brilliant on my 2007 Mazda 6,thanks so much!
@greggspolska4 жыл бұрын
It doesnt work on my Mazda. After turning key 3 times and opening door 3 times, pressing key button twice nothing is happening. Once I pull my key out of ignition doors start to lock and unlocks twice. After that my key fob doesn't work at all.
@greggspolska4 жыл бұрын
I got it solved!!! Anyone who is doing it make sure that you put batteries in the right position :) !!!! Thanks mate for this video.
@boonjabby4 жыл бұрын
I'll be honest. I thought this was taking the mickey out of me. I did it. Worked perfectly haha 😂 If you don't have the lock button on your door just flick the driver's door switch as instructed.
@vickisabella1304 жыл бұрын
Hello I'm just wanted to know if it will work in a 2007 Mazda CX-9 because for some reason my car work keyless and it have one of those key fob that have a card so apparently like I have have it in my back pocket and sit and it kind of Bend so now when I go to the car it does not recognize I have to keep using master key and it's a pain in the butt please let me know thanks
@michaelaguilar54324 жыл бұрын
Awesome! Thanks for taking the time!
@vt78284 жыл бұрын
Does this just program the "unlock/lock" feature or does it program the key to start the ignition as well? I want to get a spare key for my mazda 6 2006 but not sure if i should get the key with the lock fob or just the entry fob...
Пікірлер
This video is short and concise by getting to the point. 👍
a barefoot mechanic just like me
Thanks you very much
Why does the alarm go off for 2 minutes after programming?
I’m so freaking excited! It worked! Your instructions were top notch! Thank you so much for posting this video 😊
Thanks alot.. it’s working ❤
Yess thankyou so much
What if the key I order isn’t turning the key on at all
Honestly wasn't sure if this was gonna work on my 2006 Mazda 6. I got a remote from Amazon and when I used your tutorial it worked on the first try! Thank you so much!
Same! Tried it today and it worked
@@naa3672 1. Pair the remote? Check 2. Cut the key? Check. 3. Does my car start? No bc I still need a dealer to pair it with my car 😭 I've had this new key over a month now and I can't even use it to start my car :(
@@daltonrich7658 why are you trying to start it with the fob? It's only for performing the button functions like locking/unlocking, opening your trunk and setting the alarm off. Remote starts are completely different
@@naa3672 I never said it was a remote start. The buttons on the remote will work when the *remote* is paired to the car, but the key will not start the car because it does not emit some sort of electronic signal like the original key does. It fits in the ignition and even turns it to the START position (past ACC), but does not start my car.
Hai mate their is is small chip inside your previous key in the corner side its like a small black rectangle piece you need to take that chip and put it in your new key im the exact slot other wise car not start
Dumb ass next time be more specific of what mbuttons to press
Didn't work
Dude you saved me so much money thank you it worked so easy
this is only for the car doors, this is NOT the immobilizer that allows the key to start the engine(Transponder Programming)... Apparently this(Transponder Programming) is ONLY able to be achieved if you have TWO original Factory Keys that came with car. Otherwise a Locksmiths scanning/reprogramming tool and services will be required. (Anyone with otherwise expert knowledge feel free to correct me but this is what Ive been able to ascertain).
I did this and the locks go off automatically like they’re supposed and my key fob blinks red so it has power but it’s still not working for me, anyone know the problem?
Uselsss
When i double-press on the unlock button nothing happens. Anyone got an answer to why?
Hello, is this really worked in mazda 6 2006? Thanks
Car won't do anything when pushing the buttons 2 times any ideas
thanks buddy
Worked first time on UK '08 Mazda 6 model.
good
Where did you get the key fob ?
I just bought an 06 speed6. I only got a key with it. When ever I try to lock the vehicle with the door open it automatically unlocks. I can’t lock the car using the key. There is a red key light on the dash.
Mine isazda6 201, It worked, please carefully follow the steps properly, for me second attempt worked
This sounds like hokum but it actually works. FYI it works for 2007 as well. Thanks a ton for posting this.
I tried it and is so amazing and easy I want to thank u for the video dude❤️. But u have to make sure that u put the battery correctly first
will this work on 09 mazda 6
Is there a certain frequency that a Mazda fob should transmit at ? I have my old Mercedes fobs or my old Saab fob, but cannot seem to program them.... Thanks, Mark
Much appreciate , thank you .
My mazda 6 i grand touring 09 won't let me turn the key cause it can't and I have to press the break once to let it get to the on position but once I turn it off with the button I have to press the break then I can use the button again. I just replaced my battery and my key isn't letting me push to start and this didn't fix it.
Should this work on an 08 Mazda 6? Also does the new key need to be cut specifically to the old key?
I searched on Google and found all these steps except for locking and unlocking from the door after opening it the first time. Thank you.
8 years later and you halped me fix my first cars kay. Thank you so much.
so it didn't work... it kept locking and unlocking over and over then it stopped.... buttons Don't do anything
2012 mazda 6 here. The key worked for the doors but is not opening my trunk. Is that normal or maybe my car is fucking up lol
Does the key turn on the ignition after doing this? One of my keys does not turn on the ignition, but it does lock and unlock the car. It is cut and fits, turns the car on, just won't turn the ignition on.
It ain’t work for me
Thank you so much. It work on Mazda 6 2007. Save us a lot of money.
For what is the red button?
Anyone know where I can get an extra key? I’m being charged $400+ to get a replacement key 😒
I see you have the MPS/Mazdaspeed 6... or at least the bonnet looks like it. How many hz chip did you use?
It worked 😯 I'll change that my battery, I've been unlocking with the key,, even when I first bought the car it didn't work but the Mazda dealership replace the battery and sent the key back to me and it still didn't work. I randomly look up how to program the key in by accident and tried it and it work. I follow the along as you were talking and it worked.
Yes it works great to program fob but if you're not using the stock key then your car could possibly be put in the immobilization mode and you have to take it to the dealership should put this is your video
Tf it actually works😂😂 thanks
Worked brilliant on my 2007 Mazda 6,thanks so much!
It doesnt work on my Mazda. After turning key 3 times and opening door 3 times, pressing key button twice nothing is happening. Once I pull my key out of ignition doors start to lock and unlocks twice. After that my key fob doesn't work at all.
I got it solved!!! Anyone who is doing it make sure that you put batteries in the right position :) !!!! Thanks mate for this video.
I'll be honest. I thought this was taking the mickey out of me. I did it. Worked perfectly haha 😂 If you don't have the lock button on your door just flick the driver's door switch as instructed.
Hello I'm just wanted to know if it will work in a 2007 Mazda CX-9 because for some reason my car work keyless and it have one of those key fob that have a card so apparently like I have have it in my back pocket and sit and it kind of Bend so now when I go to the car it does not recognize I have to keep using master key and it's a pain in the butt please let me know thanks
Awesome! Thanks for taking the time!
Does this just program the "unlock/lock" feature or does it program the key to start the ignition as well? I want to get a spare key for my mazda 6 2006 but not sure if i should get the key with the lock fob or just the entry fob...
Thank you so much