The correct Service info is always the key.

@CartersDiagnostics

Жыл бұрын

Amen to that! 🙏

Excellent case study Carter! Thank you for the advise! Is very important to see what else is involve in that connector and if that control unit has a terminating resistor! I was hoping you used the decoder but with that sample rate could not be done! No COMM problems with many control units are hard! Thank you for sharing Carter!

@CartersDiagnostics

Жыл бұрын

👍💯

Great information, Thank You!

@CartersDiagnostics

Жыл бұрын

Welcome, Thanks for watching 👍

Thanks for the lesson !! Unplugging a module and getting a good signal doesn't prove that module's bad. I think this is a good time to cut the can wires at that module, and plug the module back in. Scope the wires going to and coming from the module in question. You'd see the bad signal on the vehicle harness, and a good signal at the bcm (although maybe funky with no terminating resistors.) Either way you'd see you're after a red herring and replacing the module in question isn't the answer!

@CartersDiagnostics

Жыл бұрын

Agreed! Although I personally wouldn't cut the wires, I would de-pin them. I know what your saying though. Great interpretation of the video.👍

@ablackformula

Жыл бұрын

@@CartersDiagnostics I was considering de-pinning, but if you cut the wires, you'd be able to scope car-side and module-side. Depinning would kind of limit you to car-side only.

@CartersDiagnostics

Жыл бұрын

@@ablackformula good point!

Very interesting and informative thank you 🙏

@CartersDiagnostics

Жыл бұрын

Thanks for the comment 👍

Super interesting video. Forgive my ignorance for asking this but I was wondering, when you do another can video if you could explain the difference between sample interval and sample rate and how that relates to the 10MS seen at the top of the screen as that does not seem to go with what is shown on the properties window at the end of your video. Hope this question makes some sort of sense. Again, great video.

@CartersDiagnostics

Жыл бұрын

Thats a great question. It basically boils down to "you don't always get what you want" Although I requested 10MS, the scopes capability at the time base chosen was only 5MS with 2 channels. That why I look at my property window to verify. I will certainly go over sample rate and sample interval more. I do touch on the subject in most of my videos but I never fully focus on the subject.

@lonniepeterson-xq3vx

Жыл бұрын

Thanks for the info. That helps. Look forward to you going over that further in future videos.

@MR.KNOWITALL1982

Жыл бұрын

@@CartersDiagnostics what about using CHA and CHC or CHB and CHD instead of CHA CHB:) Thanks for the video Mike:)

@CartersDiagnostics

Жыл бұрын

Great question , for my scope the 4423 it would be faster if I did use A/C channel combination or the B/D because mine only has two ADC modules. The newer scopes 4425 and up have a separate 100Mhz ADC modules per channel so channel usage and configuration doesn't matter. I hope that answers your question.

@lonniepeterson-xq3vx

Жыл бұрын

Thanks guys this is great info. I'm late to the game with scopes. Trying to learn as much about them as I can. Interesting how some of them are configured.

What pico scope set would you recommend? Infiniti Master tech

@CartersDiagnostics

Жыл бұрын

Today's version of what I use would be the "picoquad standard kit" I have added a few extras over the years, but that kit is a great foundation to build from.

4425 PICO SCOPE ,, FROM AUTONERDZ I AM INTERESTED IN . I WOULD LIKE TO KNOW THE PRICE IF IT IS POSSIBLE JUST THE SCOPE FOR NOW A MEMBERSHIP WILL COME LATER FOR ME AT THIS TIME . I REALLY LOVE THE WAY YOU PERCENT YOUR VIDEOS I UNDERSTAND THEM CLEARLY THAT IS WHAT DRAWS ME TO THE AUTONERDZ MEMBERSHIP . THANKS SO MUCH FOR YOUR TIME !!!!!!!!👍👍👍

@CartersDiagnostics

Жыл бұрын

Getting just the scope is an option , Getting a pico kit comes with all the training and support. As far as a 4425 scope, it would be best to call them for price and availability. Sorry I don't have those details. I'm glad you are liking the videos and commenting I certainly appreciate that.