You know the saying there’s mechanics and there’s technicians, I’ve often thought there’s a third category and this video displays it nicely. Great work!

@CartersDiagnostics

3 ай бұрын

Wow Thank you! Knowledge is power in this game . Hopefully this will help people from taking the wrong path on their diagnosis.

Thank you for taking the time to educate those that want to learn.

@CartersDiagnostics

6 ай бұрын

My pleasure!

I think you are on the right track with your theory of the added volume affecting the speed of the crank.

@CartersDiagnostics

6 ай бұрын

👍

Hi Mike, Many times I see Bernie (ATS) measure in-cylinder and intake pressures simultaneously without any apparent anomalies. What you point out is very interesting. I will keep that in mind... Thanks for sharing! I wish you and your family a Happy and Healthy New Year!

@CartersDiagnostics

6 ай бұрын

Yea I've seen his videos. I think his pressure sensors are all absolute pressure not pulse sensors ,the effect may be different. I only have 1 absolute pressures sensor, so I h have not experimented yet. Happy New Year.

Here's a fun comparison test: install an old-school compression tester in the plug hole (to have the hose add the extra volume to the cylinder.) Use a vacuum "T" to measure the intake manifold - one side to a pulse sensor, the other to your wps 500 set on absolute pressure. This test would show the pulse sensor having your anomaly (presumed by the change in engine speed,) but I'd expect the wps 500 to show each cylinder creating equal pressure pulls. This could prove how much engine speed variances affect the pulse sensor.

@CartersDiagnostics

6 ай бұрын

That would be a cool project. Going to have to put it on my list.

Agree hundred percent on added volume reducing compression affecting crank shaft speed You can see the same effect with wps and when doing a relative compression test. Great info mike Happy new year🎉

@CartersDiagnostics

6 ай бұрын

Happy New Year !

Great job. Thank you for sharing. Happy New Year to you and your family.

@CartersDiagnostics

6 ай бұрын

I appreciate that. Happy new year as well!!

You got it!

Love your videos

@CartersDiagnostics

6 ай бұрын

Thanks man!

Excellent point MIKE

@CartersDiagnostics

6 ай бұрын

👍

The piston is stopped at TDC, accelerates to max at 90*, decelerates to stopped at BDC. If the rate of change(speed) of the cylinder pressure, that the pulse sensor is responding to, affected the sensor’s output, then the output would be a curve instead of the linear straight line.

@CartersDiagnostics

6 ай бұрын

If you have captures displaying what you are saying I would love to see them. Thanks for commenting.

I believe the explanation is due to the EVO for the in-cylinder capture occurring at the same time as the overlap event for another cylinder. This additional volume reduces the effect of the intake pull on the manifold, leading to the “weak pull” you have displayed. My theory is this will not be as apparent in a 6- or 8-cyl configuration

@CartersDiagnostics

6 ай бұрын

Interesting theory i will have to rack my brain on it for a while. With my equipment 6 cylinders show an issue, I will have to revisit an 8 (its been a while) I personally just stopped all in cylinder and pulse sensor testing simultaneously, its to risky for me. Thanks for stopping by and commenting!

@ablackformula

6 ай бұрын

Interesting! This would be a fun test to repeat next time you're changing an exhaust manifold gasket. Then the exhaust volume won't be connected to other cylinders.

Great info. Thanks for sharing! I find the same is true when doing a relative compression with the wps500; that cylinder will be slightly lower.

@brandonsteckler3417

6 ай бұрын

This occurs due to the added volume from the compression hose. A smaller hose (less volume) will reduce this effect

@CartersDiagnostics

6 ай бұрын

I guess if you go into it knowing what to expect its not to bad. I have never done RC and in cylinder at the same time. I just don't trust it. Thanks for adding to the conversation.

@advancedleveldiagnostics

6 ай бұрын

@@brandonsteckler3417 Thanks! Any hose you can recommend that's better than the one that comes with the WPS500?

This would be great to bring up in the group therapy

@CartersDiagnostics

6 ай бұрын

I may have to do that!

I would like to see a pressure waveform overlay. Is the anomaly you are looking at coming from the cylinder with the pressure transducer in it?

@CartersDiagnostics

6 ай бұрын

No its actually its companion cylinder #4 showing the anomaly.

Good job 🎉

@CartersDiagnostics

6 ай бұрын

🥳

SHREWD Carter's Diagnostics Happy New Year 2024 👍 From Nick Ayivor from London England 🇬🇧 ⏰️ 22:40pm Good Evening

@nickayivor8432

6 ай бұрын

Brilliant video ending for 2023 years 👍 QUICK-WITTED Carter's Diagnostics From Nick Ayivor from London England UK 🇬🇧 ⏰️ 23:08pm

@CartersDiagnostics

6 ай бұрын

Happy New Year ! 18:20pm

Hi Mike, thanks for the video, I greatly appreciate you sharing this information. I believe the First Look Sensor and the “pulse” sensor are both “delta pressure sensors”? Is there a reason you chose not to use the First Look in the intake manifold & vice versa?

@CartersDiagnostics

6 ай бұрын

I think the term pulse sensor and delta sensor are 1 in the same. I use my store bought first look sensor in the exhaust simply because its tougher than my home-made pulse sensor. It would do a fine job in the intake as well.

Thanks for the info! Off subject in a previous video (that I can't find)you mentioned a micro amp clamp can you please post make and model?

@CartersDiagnostics

6 ай бұрын

AEMC instruments K110. Expensive little dude!

@DavyDiag

6 ай бұрын

Thankyou

Happy new 24

@CartersDiagnostics

6 ай бұрын

💯 and you as well.

Thanks for sharing this with us.your insight is really cool.

@CartersDiagnostics

6 ай бұрын

No problem 💯