Nice work! That turned out great!

Wanna do this back at home. I have yet to buy the welding machine but, I need to do this. You made this easy to follow and copy.

Nice work!

Good work

Great job I’m actually looking to make one for my dad just like that

Thank you for this video. Is all I wanted 👌👌👌👌👌

Interesting idea for welders. I'm a welder too. Like

Good job

You done great job there, l was a coded pipe welder years ago, l have just made a metal door for my shed similar to yrs, l used a Parweld XTS 143 inverter welding set using 2.5 Bohler rods, l also use it to do Tig welding. But yea, good work keep it up. 👍

@mepro123

4 жыл бұрын

Thanks!

Bom trabalho 👍

Good Work. Please tell about your welding machine and accessories, Thanks

Te quedo muy bien. Disculpa me puedes decir que máquina soldadora tienes

Good jobe sir very very nice vedio India

cool !!!

What gauge sheet metal should I use for a gate ? Is 20 gauge ok ? Thank you

Замок конечно оригинально...

I also a welder I like

от мастер👍

روعه 👍👍👍👍👍👍👍👏👏👏👏👏

مشاء الله عليك

Amen

Nice job. What brand and type welder did you use?

@mepro123

3 жыл бұрын

Thanks! It’s a Hobart.

What was the rod you use to help you weld the sheet metal

@mepro123

5 жыл бұрын

It was just a piece of round stock I had. Always helps me connect pieces when I've got a big gap.

sir hmare steel gate ka jo steel clip jo k dono gates ko bnd krne k bad lock krne se pehle lgate hai woh bhut hard ho gya hai war war hard ho jata hai kaise thik kiya jaye please btayiye..mene oil v lgaya lekin woh shi nhi ho rha

Can't use mig welding with gas in windy conditions the gas needs to shield the weld.

That would be a great job for me to use my everlast mig welder on. Simple but effective gate.

@stevehall8227

4 жыл бұрын

Mark Stevansen wow, your just an everlasting lover. A shill maybe even, you must work in their pr department. I’m just saying that you love your everlast on almost every welding video under different names.

@donsmith9081

2 жыл бұрын

Another everLast spam

@donsmith9081

2 жыл бұрын

@@stevehall8227 Apparently the everLast in Not good enough to sell itself so they hire people to spam all the welding channels. Sad.

Yes

ماهر جدا

What type of paint did you use? Glossy paint or chrome effect?

@mepro123

3 жыл бұрын

No paint. I used Penetrol.

Magkano Labor po niyan?

Cool video, what kind of welder are you using? You using gas?

@mepro123

5 жыл бұрын

Thanks! Hobart Handler 190 and I'm using argon.

@bfjohnmark

5 жыл бұрын

Vmaul20 what kind? Definitely not stick welding

@Vmaul20

5 жыл бұрын

Sweet, I use a Miller 180, I do the same stuff

@merlpriester

3 жыл бұрын

@@mepro123 For mig mild steel you should be using CO2/Argon mx CO2 helps the arc be stable . Argon only is for TIG welding

I ALSO WANT TO LEARN WELDING.

@roknrolla1329

3 жыл бұрын

Do it

How did you make The box for the door knob

@mepro123

4 жыл бұрын

I actually bought it. Search 'Gate Lock Box' on Amazon. $20.

Is that a hot rolled or cold rolled sheet metal.

@mepro123

3 жыл бұрын

Hot hot hot!

Это где замки на уровне головы ставят?

With a mig we must go ahead no? Avec un mig on n'est pas censé pousser la soudure et non pas tirer? Sjr les angles il descend c'est normal??

@mepro123

3 жыл бұрын

Yes, it’s a mig welder.

@hugoquelquechosecommeca3560

3 жыл бұрын

en théorie il faut uniquement pousser, en pratique tant que tu fait pas dans la charpente métallique ou des pièces vraiment sensibles, tu peut te permettre de tirer tant que tu assure une bonne pénétration yaura aucuns soucis le problème c'est que t'aura une moin bonne protection gazeuse en tirant, donc plus de risques de soufflure etc et comme ton angle est pas le meme tu apporte ton metal différemment mais en général ca tient sans problèmes apres la oui jai jamais vu des "montantes" tirées on voit pas les soudures de pret donc je peut pas trop mavancer mais en france dans bcp de boite on fait encore des descendantes alors que c'est plus pratiqué dans pas mal d'autres pays donc bon niveau soudure pas catho on peut pas trop trop parler...

What sort of welding is this ?

@mepro123

3 жыл бұрын

Mig

@marwarimarathisongbhajans6414

3 жыл бұрын

@@mepro123 कितने रुपए का है

Can I get the dimensions of the pipe and the overall door? Please it will help me so much

@mepro123

5 жыл бұрын

The square tubing is 1-1/2" 16 gauge. The sheet is also 16 gauge. Approximate dimensions are 44" x 70"

How thick is the steel plate?

@mepro123

3 жыл бұрын

16 gauge. Very happy with that thickness. Gate has seen heavy use and no dents or dings.

What kind of these welding machine...without using welding rod...i want to know more about these type of machine.

@mepro123

5 жыл бұрын

It is a Hobart Handler 190 MIG welder

@eugenemercado513

5 жыл бұрын

@@mepro123 im from phillipines how much is the price of this machine..thanks in advance

@mepro123

5 жыл бұрын

Welder is about $700. You'll need gas and wire plus gloves and mask. Grand total is probably about $1000. Not sure how much shipping is in your case.

@godfreytililio7810

4 жыл бұрын

@@mepro123 how does it cost I am in kenya

I'm guessing 81in and 6 ft

@mepro123

5 жыл бұрын

Gate is about 4' wide and 6' tall

@ddrusa

5 жыл бұрын

@@mepro123 Nice not to bad

why he is using square tubes for door and windows? where is the LTZ ??

@mepro123

3 жыл бұрын

LTZ?

Is Welding ka nam?

@chhotek8864

5 жыл бұрын

Mik welding he bhai

@derilcastelino8892

5 жыл бұрын

Co2, mag ,mig calling 3types name

hinges of that type on outside so security was not the reason for gate then

@mepro123

5 жыл бұрын

Security wasn't a huge priority. If you look closely, the hinges are oriented opposite from each other so you can't simply lift the gate up and move it. The way I look at it, it would be much faster to just hop the fence than to disassemble the gate!

@VirtualRonnie

4 жыл бұрын

@@mepro123 what do you call that hinges? or can you send a link of a picture?

@mepro123

4 жыл бұрын

@@VirtualRonnie they are called barrel hinges.

what gage is the sheet metal?

@mepro123

4 жыл бұрын

16

Why is the Handel so high

@mepro123

4 жыл бұрын

Minimum height for gates that open to pools. To prevent children from drowning.

@just4youphoto351

4 жыл бұрын

Makes sense 👍

Is there any body who could drop a quick list of tools needed for this type of project tagging me (other than the tubing and an angle grinder) what type of welder (mig, spot, etc) I have no idea about welding, mig and spot could be the same type of welding machine (I’m completely new to this welding game) or link some other KZread vids, thanks in advance for any help ❤️

@mepro123

4 жыл бұрын

Mig Welder. The hinges are called tube hinges. I used 16 gauge hot rolled steel (sheet metal) for the sheet.

its not squared...

@mepro123

5 жыл бұрын

On something like this, there is such a thing as close enough 😀

So much noise with an angle grinder and no ear protection? Very bad for the ears.

@mepro123

Жыл бұрын

I’ve got low profile muffs on. You can actually see them on the video thumbnail if you look closely.

Camera man verrrrrrrry bad Video is not current but nice work

Bad Work. without efficacity

Good Work. Please tell about your welding machine and accessories, Thanks