Learn How To Fabricate A Iron Frame Gate Ready For You To Install Wood Slats!! #dontforgettosubscribe
Жүктеу.....
Пікірлер: 22
@delfincastigador10202 жыл бұрын
Pls wear safety glass you work realy good
@AnthonyMartinez-ke8jy5 ай бұрын
Nice work
@tinycuisine6544 Жыл бұрын
Thanks for the video. Have you thought about cutting the corners at 45 degrees so you don't have an open end? That will rust pretty quickly.
@raymondsmith65042 жыл бұрын
Great video. Super informative.
@TopQualityIronWorks
Жыл бұрын
Glad it was helpful!
@VantageWelding2 жыл бұрын
Good shit brother.
@adamm10722 жыл бұрын
PPE man, Safety Glasses. but i like
@VantageWelding2 жыл бұрын
Look into heavy machinery brother. Back hoes and bulldozers always need repairs. Saludos carnal
@user-if6ce3lp9i5 ай бұрын
Great vid , looking to get into this type of work do u need to be certifed
@TopQualityIronWorks
5 ай бұрын
No you don’t as long as you have the knowledge you can start your LLC
@user-if6ce3lp9i
5 ай бұрын
@@TopQualityIronWorks Thank you much appreciated i have the knowledge i have all equipment needed ready to go 🙌
@eddiemoreno585 Жыл бұрын
How do figure out how much to charge?
@Seaninirish2 жыл бұрын
Using an angle grinder without ear protection is very bad for hearing, and.we should definitely also wear safety glasses to avoid possible serious eye injury.
@michaelolaez8707
2 жыл бұрын
Thanks dad
@chuckT479
9 ай бұрын
@@michaelolaez8707😂
@nayefalkurahi33575 ай бұрын
if your doing this a lot in front of your garage I feel sorry for your neighbors hearing all that every day.. man I would go nuts.. Imagine if you were them.. unless all your neighbors are ok with all that noise daily.
@TopQualityIronWorks
5 ай бұрын
You should feel sorry for your self Karen not all neighbors are Karens like your self. Have a great day
@manole762 жыл бұрын
You work very badly!
@TopQualityIronWorks
2 жыл бұрын
And there is no need to look at my videos you can look else where instead of talking shit...
@mr.welderllc
2 жыл бұрын
This is a great video keep up the good work brother
@TopQualityIronWorks
2 жыл бұрын
@@mr.welderllc yes sir . Thank you it's highly appreciated
@robertclayton4791
7 ай бұрын
thanks you have saved me a packet i like the way you work mate
Пікірлер: 22
Pls wear safety glass you work realy good
Nice work
Thanks for the video. Have you thought about cutting the corners at 45 degrees so you don't have an open end? That will rust pretty quickly.
Great video. Super informative.
@TopQualityIronWorks
Жыл бұрын
Glad it was helpful!
Good shit brother.
PPE man, Safety Glasses. but i like
Look into heavy machinery brother. Back hoes and bulldozers always need repairs. Saludos carnal
Great vid , looking to get into this type of work do u need to be certifed
@TopQualityIronWorks
5 ай бұрын
No you don’t as long as you have the knowledge you can start your LLC
@user-if6ce3lp9i
5 ай бұрын
@@TopQualityIronWorks Thank you much appreciated i have the knowledge i have all equipment needed ready to go 🙌
How do figure out how much to charge?
Using an angle grinder without ear protection is very bad for hearing, and.we should definitely also wear safety glasses to avoid possible serious eye injury.
@michaelolaez8707
2 жыл бұрын
Thanks dad
@chuckT479
9 ай бұрын
@@michaelolaez8707😂
if your doing this a lot in front of your garage I feel sorry for your neighbors hearing all that every day.. man I would go nuts.. Imagine if you were them.. unless all your neighbors are ok with all that noise daily.
@TopQualityIronWorks
5 ай бұрын
You should feel sorry for your self Karen not all neighbors are Karens like your self. Have a great day
You work very badly!
@TopQualityIronWorks
2 жыл бұрын
And there is no need to look at my videos you can look else where instead of talking shit...
@mr.welderllc
2 жыл бұрын
This is a great video keep up the good work brother
@TopQualityIronWorks
2 жыл бұрын
@@mr.welderllc yes sir . Thank you it's highly appreciated
@robertclayton4791
7 ай бұрын
thanks you have saved me a packet i like the way you work mate