Decorative Double Wood Steel Gate | JIMBO'S GARAGE
Тәжірибелік нұсқаулар және стиль
I made this double wood decorative steel gate for a client and it turned out great! I was really excited about welding this gate together because I knew when it was finished that it would look amazing. Big gates are always impressive and the designer did a great job with this one.
Subscribe to Jimbos Garage: bit.ly/JimbosGarage
HTP: www.USAweld.com
Black Stallion Welding: amzn.to/2XJHBJV
MERCER INDUSTRIES: amzn.to/2UzqdWw
Grinding wheels I use: amzn.to/2PPdEpo
Buy a Jimbo's Garage T-Shirt here: www.jimbosgarage.com/shop
Camera I use: amzn.to/2CfEFOi
Follow Jimbo:
Facebook: / theofficialjimbosgarage
Twitter: / jimbosgarage
Instagram: / jimbosgarage
About Jimbo's Garage:
Jimbo's Garage is a channel to watch real metal, steel, welding and wood projects.
Пікірлер: 242
Hey Jimbo. Why is it none of those guys all loving your work don't ever bother to click LIKE? Your work is always perfect in so many ways. I guess I will continue to watch and wish. Thanks.
Right on Jimbo! When I build mine I usually build my frame as one piece then cut them apart at the center. Nice to see other ways of doing it. Nice gate!
I started doing gates a year n a half ago and thank God for KZread, I watched a few of your videos and still to this day mount my wood into the gate as you do. A very smart way to build and especially for the homeowner's. Keep the videos coming...
@rojasluis5882
Жыл бұрын
Hey Henry, what type or kind of wood you used?
Jimbos Welding Toyland again, Thanks Jimbo.
You know your stuff, thanks for sharing your knowledge Sir.
LOOKS BEAUTIFUL, AWESOME JOB!!!
That's an awesome gate, great attention to detail. Thanks for sharing
Jim, your designs are getting better the more you do. Nice gate and it really looks sharp. Keep them coming.
Looks beautiful
Looks GREAT!!!
I'm a gate builder myself for about 10 years now. I can't stress enough to get away from those types of hinges. The way they are built they wear down. Please look at Barrel Pin hinges. They last 100x longer than normal/heavy door style hinges. The barrel pin hinges have a grease fitting for service. Not to mention they can handle the weight gain of the gate when the wood soaks up water from a nice rain. Great videos too!
@MrFredsAdventures
4 жыл бұрын
Is a Barrel Pin hinge the same as a Bullet hinge? Can't find anything called a Barrel Pin?
Love that gate. Want to build one for my place in a couple yrs
Beautiful work, and so nice to have your friend around. Best regards.
You are amazing, one more time a beautiful job, congratulation!
Классные видео!!! Отличный инструмент и руки золотые))
Looks awesome Jimbo, great job! 😃👍🏻👊🏻
First time I see one of your videos Jimbo, thanks for sharing your techniques. Great camera angles and really well explained! 😉
Great job. Looks really good.
Beautiful
Thanks jumbo awesome job
Very very nice indeed
Beautiful Gates
You're the man sir.
Great deal. Just right size for us. Wish we had bought one sooner.
fantastic looking set of gates jimbo,can appreciate your work even more,when we can see fixed on site,its great to have a true friend like that............all the best................dougie
@jenniferpierregibbs4262
3 жыл бұрын
I need some one in Trinidad
you make look so easy...thanks for sharing
Awesome gate that you made got there idol jumbo'sGarage 👏👏👏👏👏
what a gorgeous stunning looking gate!!! love it!!! :)
I wish I lived in your neighborhood. I'd be that aggravating kid always hanging around. "Whatcha working on Mr. Jimbo ? Can I help ?"
@eltesoro9807
4 жыл бұрын
MrTonythetiger91 🤣 me to!!!
Beautiful gate Jimbo, I'd love to have your skills. Keep up the great work my friend.
Wow, that might be the most beautiful gate I've ever seen! And your craftmanship is amazing! Very inspiring, thanks for sharing!
Просто,отличная работа!!!
Great work jimbo, you should do a video on installing these gates.
Great gate, good skills.
Damn! That's awesome!!!!!!
Awesome work !
Holy moly you made that look easy.
Love the Swagoffroad table........nice.
Awesome Job jumbo
AWESOME! NICE LOOKING GATE..LOOKS VERY STURDY!
Great video. Thanks.
Love it, Very inspiring!
Beautiful Gates Jimbo
Very good job, well done !
You are the best! 👍👍👍
love this gate. wish I could afford something like this
I love your jobs watching all time jumbo you good
Beautiful gate, Jimbo.Well done. 👍🇺🇸
@JimbosGarage
5 жыл бұрын
Thanks Chris, Jimbo!
Looks Great. I might have to build something like that for my house.
Wow i love how the gates looks and i love when you combain wood and steal design
@JimbosGarage
4 жыл бұрын
Thanks for watching, Jimbo!
Super nice!!!👌👌👌👌. This video should have 2k likes by now atleast
Great job awesome vid!
Nice, just a few months ago I built a gate almost the same except the arched top above. I've been looking for a video like yours for inspiration, but it's good to see it right now. I see you used argon, I used arc welding that makes life harder and I do not recommend. Greetings from Romanina and thanks for the video!
Nice job! I like the arch at the top.
Wow Jimbo
Glad to see those guys all wrapped up. I get nervous too with corner flex on big hanging pieces like this. Whenever I have some dead space in a sheet of steel on the plasma table I cut gussets from it, so I have a big pile of them to pick from to stiffen things up. Better over built than re-built, eh?
Nice looking gate.
I have the sudden urge to go build an RV gate! LOL Great Video!
Great looking gate Jimbo, I really like the design and build! 👍👍
Beautiful job going to make me one of these for my house
Great video. Gates came out awesome. Just hope no one parks too close to them.👍🏻
Nice!!!!
Really nice Jimbo! I always liked the look of black steel and wood together. Great design.
@JimbosGarage
5 жыл бұрын
Thanks Brian, Jimbo!
Your table is bad ass! Great video. Nice gate!
and i love your welding table
Nice!
nice work!!
The gate is very pretty. Congratulations. Greetings from Poland
Good job and look nice.
Great looking gate.
@JimbosGarage
5 жыл бұрын
Thanks Wayward. Jimbo!
very good, good job!
👏 awesome
DAM..Wow That Looks Super Bad Ass=Awsome..That Was Some Real Good Work Jimbo !
Amazing work...ciao
Holy shit that gate GORGEOUS
As many gates as you do, get a roller. SWAG Off Road is the one I have and it works great and is not too expensive. Their dies are the cheapest of any and that's where the money gets expensive. I have several curved pieces I cut on the CNC plasma table that I use as a template guide when rolling the steel. That's the secret as you can easily tell when you've rolled it to just the right curve. Make several passes with the roller to get it to just the right curve. That way, the gate always ends up matching my drawing. I cut the templates from 10ga steel - about 36"x4" where one of the long sides is cut to the curve I need. I cut letters into the template indicating what radius they were made for. When I do gate tops, I often design them to fit one of the templates I already have cut. And BTW, nice work and what a clean and neat shop you have!
If in the future can you show the install I would love to see that on the gates.
I am completely impressed with the quality of each project!!
That's a nice looking gate you talk about the 16gage I hate it I rather use 14 but sometimes I have to use it when I do I use 5/64 rods I get it at some welding supply stores home depot don't carry them I like the way you set the wood in pretty neat
Nice project Jimbo. I want something like this at my house but about a 4 meter opening (13ish feet) with horizontal slats and just a plain old rectangle. Always a pleasure getting a jimbo vid popup. Have a good one mate!
@JimbosGarage
5 жыл бұрын
Thanks for watching Troy, Jimbo!
nice work
Nice door. Barell hinges are great too.King metal has lots of them. Luckily there is one 15 min from my house
Nice.
Great job!
@JimbosGarage
4 жыл бұрын
Thanks for watching! There is a lot of good ones out there. I like HTP you can go to usaweld.com and check them out. Jimbo!
@SovietUnion181
4 жыл бұрын
JIMBO'S GARAGE thanks Jimbo!!
Nice👍
very nice
Nice
You are work is owesam
Super job done once r
Nice gate bro
Да с таким оборудованием ,одно удовольствие работать
@user-iq7im9bo2d
4 жыл бұрын
попробуй с нашими зп соруди такую мастерскую!)
Saludos gran máster desde chile
Greetings from Bulgaria
好厲害
Awesome gate. What is the radius on the top pieces? Do you have a video of complete install of lock box, with knob and dead bolt? What needs to be done on receiving gate?
@8LARAIDER4
2 жыл бұрын
I had that problem
Great video man. Wanted to ask if you have a video of the actual hanging of the gate like when you welded the gate to the post.
THANKS FOR POSTING THESE GREAT VIDEOS, YOU HELP ME OUT FIGURING OUT HOW TO REBUILD MY FENCE AROUND MY HOME AFTER MARIA TORN IT DOWN WITH TREE BRANCHES THAT WEIGHT UP TO 100 LBS THAT FELL ALL AROUND , STILL HAVE TO REMORE A BIG PINE TREE BELIEVE IT OR NOT WE HAVE THEM HERE TOO, KEEP THE VIDEOS COMMING , THANKS AGAIN
@JimbosGarage
5 жыл бұрын
Thanks for watching, Jimbo!
For me it Would complete the video to see the gate it “ in action “. Aside from that very very nice looking .
I see Jimbo, I'll give it a thumbs up 😉. I would like to have a hobby room like you have..
Pat sure like to screw around alot :o) Great looking gate. Love it. Congrats to the own and maker ;o)