JOHN DEERE 300 GARDEN TRACTOR FIRST START | KOHLER K341 AQS
Автокөліктер мен көлік құралдары
After a ground up rebuild of this engine, I can finally say this rebuild has been a success! This engine has was pretty straight forward to assemble
and get running again. Everything around the engine is very visible and well-placed. The carburetor to governor setup is very accessible and the coil can be easily changed on the opposite side if needed. The K341 is currently one of my favourite engines!!
So far I have rebuilt two Kohler K Series engines and one of them has been resealed. These engines were made in the 70's, and they're built so well that many original engines are still running until this day.
The Kohler K series engines are known for their strong cast iron block with aluminum internals, flat head and simple air cooling. If you ever stumble upon a K341 or any K Series Engine, I would recommend you pick it up and rebuild it if necessary.
If this video was helpful, please give it a "thumbs up", comment if you have any questions and consider subscribing.
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: bit.ly/37EDeaD
Instagram: / workshoprebuild
Tiktok: www.tiktok.com/@workshoprebui...
E-Mail: Workshoprebuild@gmail.com
🎵: / music-for-the-youtube-...
Timestamps:
00:00 Intro
00:30 Frame Update
01:18 What Did I Do?
03:55 Wiring/ Dash Panel
06:29 Dipstick Issue
07:57 Work Off Camera
09:40 Startup Check
10:45 First Startup
12:31 Engine Rebuild Summed Up
Пікірлер: 8
Dash highlights are awesome great build.
@WorkshopRebuild
2 жыл бұрын
Thank you very much John. I had to give it a little bit more life and with the yellow outline I will be able to see the symbols better. Regards -Andreas
Is that an NOS hour meter? That's the original style of hour meter that a 300 would have had when new. I like it! It's nice to be able to "start over" counting the hours when the engine has been rebuilt. Sounds like you have a winner there, gotta love when everything goes smoothly after a rebuild. Well done!
@WorkshopRebuild
2 жыл бұрын
Hey Michael, This is an original hour meter and it was previously on the parts 317 I had. It had about 800hrs on the clock and I opened it up like a swiss watch and turned back the gears...but don't tell anyone haha! Yes, I thought it would be nice to give the JD300 a fresh start after a full rebuild:D I really like this 1 cylinder engine!! It sounds even better than the KT17 in my opinion. Thank you so much!!
@MichaelTJD60
2 жыл бұрын
@@WorkshopRebuild That's a neat idea! I'm too paranoid to open one of those meters up...because there's a good chance it wouldn't go back together. lol
@WorkshopRebuild
2 жыл бұрын
@@MichaelTJD60 It's not the easiest thing to do, but it's possible. You need very small screwdrivers and a lot of patience! Maybe you'll try it out once :)
What is the engine in the background of the video at 11:35 min? is that a nother project coming? also nice video! good job on the 300!
@WorkshopRebuild
2 жыл бұрын
I'll have a video on that engine very soon and some other projects :) I might have to work in front of a green screen soon haha Thank you very much!